1,783 models
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
*v2. 22nd February 2024 - screw holes in left and centre plates updated to clearance holes DRAG is an assistive device that enables users to write or draw without having to form a tight closed grip with their fingers. Simply rest your…
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm 3D printable replacement chassis plate for the popular 4WD Arduino robot/smart car Includes a split version for printing on standard 200 X 200mm beds To join,…
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
3D Printed race track RC car 1/10 scale 3D printed body available HERE Step files of all the 3d printed parts are now available Stay tuned for exciting new projects on our Facebook group The 3 main guide listed above contain all the…
For the most up-to-date parts, visit the GitHub project page . Video: https://www.youtube.com/watch?v=_t0HLC2bZMU This is a 1/28 scale RC chassis designed to be compatible with Kyosho MINI-Z body shells. Current version fits 90mm (M)…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
A chassis designed for a custom LFR.
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…
3D Printed OFFROAD RC chassis 1/10 scale RC BODY available HERE Stay tuned for exciting new projects on our Facebook group For any technical support please contact the following email : [email protected] The 3 main guide listed…
1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Boden tube to extruder assist used to straight the boden tube at the top of the extruder so the filament goes in easier.
This is still an untested WIP, but I am uploading in case people like the idea enough to modify to fit other printers. I intend for the handles to be useable. A ½" square profile steel pipe is to be tapped and inserted into the top…
This is for the NON NIVOMAT suspension! For further details, please refer to my work in progress, collaborative, P2 XC70 Lift Guide Here! (A PDF Version is also available under the files tab in case the link is broken) This should lift…
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
UPDATE: 7/3/2025 I have added fusion360 and step files for the backend, if someone want to run wild with it and make modifications. If you do make changes, please upload as a remix. These files are not intended for commercial use. It…
This is an open RC car chassis project. Step files are attached. Remix, update, redesign as you like. You need to print the gears with 0,2 mm nozzle and %100 infill. Rest can be printed with 0,4mm nozzle and %80 infill. I printed all…
This is a 3D printed keychain design of a Prusa Filly assistant. It is a miniaturized version of the popular paper clip character present in PrusaSlicer. This keychain is made to be attached to your keys or bags, serving as a cute…
-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…
Was looking for a good representation of St. Francis of Assisi and everywhere I looked I came up short. The main model is from a 3d scan of a bronze figure of St Francis of Assisi carved for the high altar of the Santo in Padua, made by…
This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…
Update März 2024 Ich habe noch zwei weitere Embleme von Tegernseer und Erdinger hinzugefügt. Das kleine Augustiner-Emblem hat jetzt ebenfalls einen glatten Rand. Vom kleinen Tegernseer-Emblem gibt es zudem noch eine “leere” Variante zur…
Chasis de un carro de Arduino más sus adaptadores
This is a chassis for 1/43 scale bodies like Carrera Go, SCX Compact or other bodies. With this chassis you can convert almost every 1/43 scale car to a RC car. The only things you need are two servo (steering and motor), some screws,…
This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…
This car chassis allows you to replace a broken acrylic chassis or have fun upgrading your current kit to a fun buggy-style model. This model has been designed to print with minimal support (only the front face which holds the ultrasonic…
Welcome to the Universal Chassis! This chassis was created to fit the needs of LCVT, a club dedicated to making custom lightsabers from scratch. All the more recently built sabers found on their website use this exact chassis. The main…
Basic wall mount for Home Assistant Green. 2mm thickness and 1mm space between the cooler and holder. 2x screws 3mm, with D5mm head. Printed with PETG No supports
Print it with TPU and it will not scarf your camera window. It holds itself without the need of any glue or doublesided tape.
Multipurpose Robotic car chassis, compatible with 9v Geared BO motors. Designed for 12v 1.3ah lead-acid battery pack. You can easily mount the battery without any screws or glue. If you found this useful, please donate what you think it…
The assistive pencil grip is an adaptive aid designed for people with low grip strength and hand dexterity. The pear shape allows writers to rest their fingers in a natural writing position. Users can choose between two sizes — 7.8mm and…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…
This Magazine pull is ment to printed in TPU, an
For more info about this project, please have a look at my blog post .
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
Slot Car Chassis that fits a DC Motor 3-6VDC 25MM
Scale is 1:10 This chassis was designed to fit for any body in size length and width. The motor is located in the middle. Only the rear shafts are driven. There is a differential with a bewel gear with a 2,5 ratio. You could use bought…
This model is the original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing. It's based on the official injection-molded parts but with some adaptation to avoid many supports : Home Assistant logo on the bottom…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
Universal platform for robotics or RC vehicle just for fun! ---------------------------------------------------------- This project was created as "proof of concept" of rocker-bogie chassis. It was used for testing software and mechanical…
The amazing Voice Assistant finally has a vertical stand! In fact, now it has three : The original stand, which has no backing for the device. It's elegant (you can see it in the photo), but some have rightfully complained that they feel…
Hightower: A 3D-Printable Vertical Mini-ITX PC Chassis This is a Mini-ITX case in the style of the Xbox Series One, the Phanteks Evolv Shift, or the NZXT H1: it has a small footprint, but plenty of space inside. This is designed to be…
Very simple 3D printing. Good luck with printing and lots of fun with Line Follower. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Filament: any any any Category: Model Robots
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
Description: Enhance your drilling operations with this attachment that ensures a dust-free working environment. Its sturdy construction and integrated grid effectively prevent the spread of drilling waste. It’s the perfect addition for…
Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…
This is a resin-printed chassis for a 1/87 scale semi-trailer truck. I used cabin and wheels from Herpa Volvo FH16, but it can be used with other models. (There is no 3D model of Volvo cabin in this project!) The goal of this project is…
Leela is a 3D printable sensor housing intended to be used with Home Assistant and ESPHome. She can be described as a "room sensor" with the primary sensors being motion, temperature and humidity. The data from these sensors can be very…
18650 accupack soldering/welding assisstant for accupacks up to 4x6
I didn't realise this at the time but this should print fine without support tilted 90 degrees. Wall mount pattern is the same as the OneNineDesign RaspberryPi 7" Display case. Could be improved somewhat by make it hug the Green case a…
This is a simple design to mount your Home Assistant Yellow to the wall or any flat surface. I wanted something that would use the existing case and screws it came with. Because the Home Assistant Yellow PCB mounting holes is perfectly…
Edited 10/23/22: Revised stand on all models to accept 8 pin CPU power connectors that were previously too close to plug in. Added model name to all models. Added option for ATX PSU support. These are the first three “final” versions of…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
The is a MDT ACC Chassis Rear Bag Rider. Hardware: (2) Socket Head Screws 4mm x 10mm, (2) 4mm M-Lok T-Nuts Filament: PETG Black
Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…
3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
Unleash Your Smart Home's Potential: Create a Custom Home Assistant Dashboard! Ready to ditch generic interfaces and control your smart home like a pro? This project empowers you to build a personalized Home Assistant dashboard using…
The Ropener is an open-source motorized curtain opener that retrofits onto your existing curtain rod. Silent stepper motor, ESPHome-native firmware, no cloud, no app required. Works with nearly all curtain types. WHAT IT DOES Pulls your…
A simple wall mount for the Home Assistant Voice Preview Edition
For the most up-to-date parts, visit the GitHub project page . A 3D-printed, 4WD RC drift car. 1:28 scale, fits 90mm (M) wheelbase MINI-Z shells. Test drive: https://youtu.be/90DoZpYbfy4 U-joint closeup: https://youtu.be/g_EzM2HMQvg Note:…
A generic “gooseneck” style chassis for the USA Trains 40' shipping container. I use 2.5mm/ 3/32 inch steel rod for the axles. Landing gear can be positioned up or down with a bit of 2mm rod. NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING…
Air Assist for Creality CR Laser Falcon - Requires cutting the acrylic. I already have a compressor and the tubing so I built this to suit my needs. I designed this to be printed flat with little to no support.
i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…
UPDATE - Latest Version on MakerWorld. This is a remix of Bigbore729's MCS chassis and Apache chassis models. The original Apache chassis needed some updating but the original CAD files were lost. I worked backwards from the MCS chassis…
I designed these mud guards for a Traxxas Slash 2wd High center of gravity chassis to keep the dirt out of the chassis. It uses the holes from the nerf bars so you will need 4 screws that are a bit longer to replace the ones from the nerf…
https://youtu.be/aHf-W1n8ITU?si=BQhXFbC39kVWgMhv Check out my profile for the rear axle and all the other parts. -You will need M3 Nuts and Screws in 10, 12, 16, 20, 25, 30 and two in 55mm lenghts. -12x18x4mm bearings. (Just buy 20 or so,…
A tabletop stand for the 7 inch models of the blackmagic video assist monitors, both 3G and 12G versions
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
This is a chassis for a neopixel lightsaber that utilizes a LGT Saberstudio, many Lightsaber companies offer hilts that use the LGTsaberstudio saber core, such as DarkWolf, Saberforge, Crimson Dawn, etc. This will work in whatever hilts…
Case for ESP32 board with external BT/wifi antenna I used as BT proxy from home assistant. Board I used is AZ-Delivery ESP-32 Dev Kit C V4. I re-purposed an ipad usb-c charger and micro usb cable. I'm sure there is a nicer and less…
This project is designed to help you stay on track with your focus sessions, using a simple and intuitive interface via a rotary encoder and an OLED display. Whether you need to time focused work, breaks or other worthy pursuits, this…
Back in the day, I wanted to mount two Anderson Powerpoles into a sea-bird-like case from Xiegu. I didn't want to spend $27usd on one of these when a few minutes of designing would lead to a $0.75usd 3D print. Drill a hole just slightly…
Have you felt like your Snapmaker 10W Laser Module is missing one key feature - an Air Assist System to reduce scorching when engraving or cutting? At least I have. After I saw a really cool mod by german YouTuber Raagnarix (that involved…
This makes for a neat wall-mounted home automation controller e.g. using Home Assistant. You'll need M3 threaded inserts for the lid. The logo on the lid can be printed in a different color either using MMU or by manually switching…
This model is the original enclosure for Home Assistant Yellow optimized for 3D printing. Compared to the transparent enclosure shipped with Home Assistant Yellow, it has a few adjustments which make it more suitable for 3D printing, in…
Please give it a ❤️ if you like it 🥰 Here is the video: Please give it a ❤️ if you like it 🥰
A parametric stand and holder for PCBs, and other items that want to wander off when you're soldering at them. The rotating grips print in place, and the columns of the supports twist independently to lock the supports into the rails.…
We thought it would be cool to experiment with the gimmick from Scorpion Sting as an Assist Blade. So we made it! As the bit spins during an X-rail, this assist blade will swap modes! It is not free-spin, and is locked to the rotation of…
A simple tool used to hold the upper receiver in place for easier cleaning of your rifle.
This air assist for the Longer Ray5 10W module uses only two 3M screws to hold it in place. I used some 4mm Inner, 6mm Outer air hose. I printed it with a raft to help hold it down and you don't need to use supports if your printer has…
Willys Jeep chassis and drive train. The chassis provides the frame and pretend suspension for a rolling model of a Willys Jeep. Broke it in two projects, the body and accessories to follow. All parts are PLA except tires and leaf…
I have built a 4WD car and programmed it to be controlled by phone. However, it didn’t look quite right, so I designed a new body. Since my printer isn’t large enough, I scaled it down slightly (to 97.5%) in PrusaSlicer. The result turned…
Buy here: https://3dreamforgebyaandn.etsy.com/uk/listing/1861948638/rc-mud-guard For maximum toughness use TPU however PLA works well too. BOM 2 x M3x20 Reuse the original M3x14 bolts to secure the shield to the towers.
Diseñé este chasis de combate resistente y funcional para competencias de robótica, ideal para la categoría de Mini Sumo. Está optimizado para utilizar componentes fáciles de conseguir y ofrece un ensamblaje sencillo, perfecto tanto para…
This is a Front Bag Rider for a Rifle Chassis. Use (3) M-Lok Screws and T-Nuts to attach. The bag rider helps stabilize the rifle on the bag and gives the shooter a place to firmly hold the rifle on the bag. Can be used on both sides or a…
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
Origin My wife said she wanted something to hold her coins and coin roll wrappers. After creating a couple of prototypes in Fusion 360, I landed on this third design which we're both really happy with. Coin Rows There are four rows - one…
This is a very versatile truck platform in which we can add various payloads for different civil and military roles. For example the missile transport payload as upload earlier. In the future I plan to develop payloads for fire truck,…
Another Raspberry Pi 4 Case to add to the never ending collection here. Other cases on here were nice but I just wanted a little different look to mine. The "insert" file can be printed in a different color (I used "home assistant blue")…
This is the second design of my little home automation sensor box. I've flashed it with ESPHome making it really easy to use in Home Assistant. Powered via the USB port on the Wemos D1.. doesn't work off a battery, this wasn't my…
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
