55 models
This is a rear axle for the C24, B16 and probably other vehicles by WPL. You need to have the metal parts; bearings, rod, gears, etc. It may also work with the stock parts. The margins are tricky, you may have to do some post processing…
You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! Most common 73 parts are included: 3704 Black Technic Axle 2 3705 Black Technic Axle 4 3705 Green Technic Axle 4 3705 MdStone Technic Axle 4…
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
The combination of replacing the “kludgy” filament slot with an air-tight collet with gasket and PTFE tubing along with adding a gasket to the base groove and sealing the humidistat/thermostat with silicon makes the case near air-tight –…
This model is compatible with the lego system.
This model is compatible with the lego system.
This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
Print the dino-clip in place without supports. Print two sets of axles for each hole with supports. Works great at 0.2mm. Set Infill to any percentage, I am using 20%. Works best to insert both outer axle pieces at the same time or do the…
This antenna is modeled on a real antenna that is located in the Antarctic. The special feature are the axes of the antenna which function via two hemispheres (bent axis). This design is unique in the world and this antenna only exists…
Simple horizontal cuts on the axles for flat printing with no supports. I also created a 128mm solid axle to hold the worm gear to replace the 39mm and 88mm axles. The original design wobbled a bit when driving the 60 tooth filament guide…
1/87 Goldhofer 4 axles trailer / Printed with 0,25 nozzle on Prusa Mini+
This model is compatible with the lego system.
1/87 Goldhofer 6 axles trailer / Printed with 0,25 nozzle on Prusa Mini+
!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…
1/87 Goldhofer 5 axles trailer / Printed with 0,25 nozzle on Prusa Mini+
Modifications to 3DSets Landy Wagon (and other 3DSets models) to go to metal transmission from gearbox to wheel, using Thumper axles Use in combination with Gearbox with 3D Printed pulley and Metal output GT2/Metal pulleys gearbox UPDATE…
Nastavení tisku: (PrusaSlicer) výška vrstvy: 0,3mm (Prusa mk4: 0,3mm DRAFT) perimetry: 4 výplň: 15% podpěry: žádné materiál: PETG, ASA, ABS (tisknout na běžné nastavení teplot) Sestavení: Potřebný spojovací materiál: šroub M3x16 - 1ks…
This is a ground-up remodel of the carriage from https://www.thingiverse.com/thing:4199752 and the wheels from that design's predecessor. I loved the wider carriage deck, but I didn't want to deal with printed and glued axles. Since I…
Tired of having your Lego Technic axles to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful organization?…
The model can be printed without support. Optionally with disc, so that the chain does not jump when backpedaling. For the disc M3x8mm screws are needed.
the rear mount parts for the Tamiya Haulers let me know if they don't work i printed them in pla with 100% infill but not tested fully yet
Just unbolt your 12mm thru axle, and put this gauge between the thru axle and the fork. Screw in a long m5 bolt into one of the two m5 hole as the gauge to see how true/bent the rotor is. Spin and true the rotor with a plier. Supports…
This is a truing stand adapter for thru-axle hubs. Designed to support 12mm, 15mm, and 20mm hubs. The only thing you need to bring to the table is one fully threaded rod (M6 x 150mm) .
This model is compatible with the lego system.
This model is compatible with the lego system.
This model was designed for use in Lego-based film photography projects. Sizing: The teeth are the correct pitch for 35mm film with standard sprocket holes. The central hole fits Lego Technic axles, and is sized to slide on the axle but…
Upgraded axle and wheel set with a stronger, more precise joint between the axle and the wheel. This remix solves the problem of wheels wobbling, slipping, or wearing out the connection over time
The threaded bolts as axes for the X and Y idlers are, in my opinion, Prusa's biggest design flaw. It shortens their lifespan too much. Here is an alternative for smooth axles. I used 3mm spring steel rods and shorted them with a Dremel.…
This 1927 Chevy truck was very popular through about WWII. This model prints with the wheels and axles that turn. I designed some supports to minimize print time. If you include the slicer's supports, there will be much fewer strings to…
I tested several different main spindles for the awesome filament spool rewinder project. The main issue I found with these is that they put one flat surface onto another and rely on axial pressure to prevent slipping. Inserts work…
Print the guiding rims and axles with 5 walls and 50% infill. For a whole set of two spoolholders, print 2x base 4x axle 4x rim The rims and axles should be a tight fit, but not need excessive force to be pushed over the bearings re. into…
A combination of the spool axles and nuts from the original model by @MiklosKiszely_486882 with the universal centering cones from STORM DESIGN (@Damian27) . This saves a couple of parts, avoids centering discs for different spools and…
I was thinking of trying the spool mods that use bearings, but I don't have any bearings. I don't want to have to buy bearings. What I did have was some brad nails. This design uses 3D printed rollers and some 16ga brad nails as axles.…
This a complete chassis for Drommon's King Axles. It is centered around the use of a Wheely King transmission and shock towers (what I had on hand, fairly easy to find). Printed in PLA at 100% infill and 0.2 layers. Uses RC4wd M3/M4 rod…
I tried to print the rolling wheels upgrade but the axles didn't fit too well for me so I resized them and then designed some JDM wheels for the KEI TRUCK model to go with them. Please consider rating the print and posting a picture of…
This is a remix of the original scx24 trailer axles, but these use bearings and are stronger than the original ones. two 10x15x4 bearings are required for ONE axle. I used grease in mine to smooth out the operation and make them less…
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
So I got fed up with having a set of spool centering disks since I have lots of different sized spools for my filament making/recycling setup and designed a disk that should work with wide range of spools. Probably not all but at least it…
Axle vice for QR wheels, print with thick walls/infill as there will be a lot of force applied to them. Hole size might be a touch small out of the gate, but should be workable in a pinch. This isn't meant for heavy use, I just needed it…
Deconstructed for easier printing
Redesign of my other TUSH using less material and printing faster but nevertheless giving improved stability. Print the guiding rims and axles with 5 walls and 50% infill and a brim for the axles. For a whole set of two spoolholders,…
Modification of original model from BlackCrow: https://www.printables.com/de/model/278505-rock-hopper-off-road-camper-18-scale-rc-model-by-b This remix moves the bearings of the wheels from the rim into the hub, which then accepts a…
after many failed prints of trying to make my original proyo axles design l've decided to make a new one that's easier and smoother to make than the original. introducing my new axle design, the 3 piece axle. the axle is made of 3 new…
I wanted to be able to create a dry box that could hold multiple spools and dispense from them at the same time. The legs on the original left a lot of space between spools when placed side by side. I designed this to reduce the waste…
This is a bearing race for a thrust bearing. It just needs two M8 washers and 8 x 4.5mm (0.177") ball bearings of the kind normally fired from BB guns. It was designed for the bearings of the RepRap Darwin Z axis, but is a generally…
The bearing interface on the original model allowed the bearings to press too far into the hub, allowing the flange to rub on the arms and adding drag. Further, the overhang in the bearing area would cause spaghetti, and pressing in the…
Bonjour, Suite à une route difficile j’ai cassé l’essieu arrière à la jonction du cône dans l’angle ! J’ai fait de nouvelles pièces pour les essieux arrière et avant avec un congé sur tous les angles des cônes. Depuis la modification en…
Hubs designed for making Hebocon-style cars and robots using salvaged print feed tires and plastic straws.
Better fitted axles for the matador maker +3 series toys. I love the wooden toys but the axles are extremly fast to loose. If the wooden axle is compressed by the part or the removing plier it is too loose after that. So i designed a axle…
When mounting the tires inside a Hxxxl light bike trailer from Hinterher they're very loose and tend to tilt out, so that they're not flat with the chassis. Using those of this axis holders they're secured in place during storage.
after many failed prints of trying to make my original proyo axles design l've decided to make a new one that's easier and smoother to make than the original. introducing my new axle design, the 3 piece axle. the axle is made of 3 new…
Upgraded axle and wheel set with a stronger, more precise joint between the axle and the wheel. This remix solves the problem of wheels wobbling, slipping, or wearing out the connection over time
A combination of the spool axles and nuts from the original model by @MiklosKiszely_486882 with the universal centering cones from STORM DESIGN (@Damian27) . This saves a couple of parts, avoids centering discs for different spools and…
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
