135 models
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant
Had problems with the visible area in the picture of the camera. Had to tilt it a little bit down, that is what this stand is for. Has a bajonett like the original wallmount. Used PLA, supports needed for the bajonett.
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
A simple stand or wall mount for Camera Tapo C200 & C210. The stand is available in several height variants (if you need a different one, let me know and I will add it).
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
I needed a low profile mount to stick to my wall as a baby monitor. I used two XL 3M command strips (removable velcro tape) to adhere to the wall. I printed the mount out of some PLA+ at 5% infill and 80% infill around the little arm…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Tp-Link camera (C200, C210, etc.) mount for Prusa Enclosure The camera can be mounted on the right side of the Prusa Enclosure using the original camera mount holes. Simply place the camera on the mount and rotate it clockwise. This…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Toutes les pièces imprimables sont ici, mais pour les détails de montage voir sur mon site : http://fusees.free.fr/base%20bouchon%20compressible.htm#BBC21
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Simple stand to be used to see whole floor in kitchen, mainly to see what our dogs are doing. Ready to be printed. Used with PLA.
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
The design draws inspiration from Altair's TAPO C200 Bracket, leading to the creation of a new design that incorporates the Original Mount. This addition eliminates the need for Bolts and Nuts in connecting the original mount.…
Update 2026 : Added v2 mount with minor fixes Update 2024 : Added M12 screw with hex head ---------------------------- I've designed this support for Tapo camera C200 / C210 / C220 to be mounted on various baby cribs. Print specs: 0.2…
Wall Support / Mount for Tapo C200 C210 C211 C220 C225 TC70 TC71 WIFI Security Camera Compact upside down wall hanger wich uses original Tapo support (replacement available in the files) 8 holes = 4 positions (set the origin of the cam)…
Accurate replacement for the original tapo base. Print with PETG, 0.3 mm layer height. Some sanding may be required on both pegs to get a perfect fit. Update 20240218 (9): Added a groove to insert a ø 1mm metal wire. The wire needs to be…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
TP-Link Tapo Camera Inverted Mount This is a remix / mashup of Kadows' upside-down Tapo camera stand and Cewo's Tapo base (https://www.printables.com/model/377139-tapo-base-c210). Design I printed the orignal but found that the stand was…
how to use Use a M4 screw with a flat underside of the head. The head can be up to 4mm thick. how to print Print wings on the bottom. Enable snug supports. The only support will be in the middle. Put the mount horizontally on a mouse pad…
I made a remix of the wall mount for Tapo C210 WiFi camera. I have simplified the wall mounting part with the holes, in order to reduce the printing time and to increase the durability of the part if by mistake you apply a force and form…
This is a Highstand for my Tapo C210 Cam, this stand helps me to observe my 3D Printer with the best view in the right position. Feel free to give me feedback and share your prints, I appreciate every comment and download or even a small…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Wall bracket for Tapo c210 camera. Bolt hole pattern to mount supplied locking plate that comes with the camera.
I designed this mount for my Eufy C220 camera, but it seems to fit the C210 and S350 camera as well. Might also work for different eufy camera's. You need 2 screws to attach it to a vertical surface, in my case the windowframe. But could…
This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…
The original design was perfect, but I needed some more tilt to it (30°)
Mercedes 215 CL class door switch panel mounting hooks. Often broken or missing, OEM part number A2157208948 currently marked as NLA. Modeled after the original one with some modifications to allow printing upright without supports.
Summary Simple and quick-to-print corner mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same…
I contacted the Maker of the Model STP9000 and asked to edit it for SC21. I removerd the extension hook. It is printable without support. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with…
I had some NFC tags laying around, and i needed a way to store them. I found this https://www.printables.com/model/258431-rugged-box-parametric/comments which had a parametric file, so i edited it to hold 25 cards. I added a the Hylian…
I needed a way to mount my C200 on my Ender 5 Pro and couldn't find existing models that would work, so I modified an existing design to be suitable. I also created a new bottom part to mount on 2020 rails with M5 screws with drop in…
Side facing door mount for TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Features : Door can be fully opened without needing to move the camera Camera angled slightly down at print bed to better see first layer squish Adjustable…
Parametric Tapo C210 inclined wall mount. You can change the inclination angle in the spreadsheet. I printed it in PLA with 4 wall loops and supports for critical regions only.
Summary Simple and quick-print ceiling or wall mount for Tapo Webcam. With countersunk holes. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use the same type of mount. Print Layer…
3D Printable case for the C210 Heat Set Insert Soldering Iron Tips compatible with, for example, Miniware TS21, Fanttik T1 Max or YIHUA 992D-II 2-IN-1. Fits the Insert Extractor V2 (not the V1). Compatible with: (GLOBAL - shipped from…
Stand with integrated cable management for optimal visibility of the print bed.
camera mount for tapo c210.. but it works with tapo c200 too. Category: Parts
Modified original model to fit my crib better switched the camera orientation Supports needed.
Adjustable door mount to centrally mount TP-Link Tapo C200/C210 cameras for Bambu Lab printers. Mainly for the P1 due to the poor built-in camera (only 0.5 FPS), but fits the X1 too in case you wanted a different camera angle Features :…
This is a camera lens cover for the Guide IR PC210 Thermal Camera. It covers all the lenses as well as the laser. Prefer PLA for the print - it's what I've used. But certainly other materials should be fine as well.
A mount to fix a Tapo C210 camera to a 16mm pipe. The mount has an inner diameter of 16.5mm to compensate for printer tolerances. Add a small piece of rubber when fixing the mount to achieve a tight hold. Designed to be used with M3x6…
This is the “GR2” rubber grommet that along with a metal bushing and a screw, keeps the PGM-III unit in place. A suitable material for the application is TPU (thermoplastic polyurethane), a flexible filament with excellent…
A mount for a Tapo C200/C210 (and possibly other Tapo products) that connects to the excellent Flexible & Sturdy Phone arm by @FunkyArt_274361 https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed
FTC 21196 Norwood Industries linear slides. Featuring anti-slip bearings.
C210 - can carry 3x C210 solder tip box + 3x C210 solder tip without box HS01 - can carry 8x HS-01 solder tip without box HS01 - has a top cap
Mounting to the original camera plate with 2 M3 x 10-12mm screws and M3 nuts. onshape link
My DC21 motorized head brushbar motor stopped working. It turned out the center gear inside my DC21 motor head brushbar motor was completely stripped. Dyson doesn't sell or fix these anymore and recommended I buy a whole new Dyson vacuum.…
C210 Soldering Iron Tips Tray - for 3 tips. Press down on each end for easy removal
This is a 2040 extrusion mount adapter for Tapo smart cameras including C200, C210, C211, C220, C225, TC70, and TC71 . 🔹 Designed to fit 2040 aluminum profiles – tested on Anycubic Kobra 2 Neo . 🔹 Non-adjustable – simple and sturdy mount.…
Vertical DIN-rail mount for MKS TMC2160-0C external stepper drivers. Use PCB DIN clip to atach it to the rail. I taped an M3 thread in the holes but you can also directly screw into it. Link for PCB DIN CLIP from VORON github page.
Camera mount for Tapo C200 , C210 cameras and alike. THe original inverted mounting hardware is necessary to screw in the inverted base for the camera in the mount. The file includes a small hook which needs to be printed twice , and laid…
Stojan na kameru tapo c210,C200 ve tvaru robota
Custom-designed wall mount for the TP-Link Tapo C210 security camera, likely compatible with other C2xx series models (C200, C220, C230). Designed for sturdy, clean mounting to walls while keeping the camera fully adjustable. I originally…
Tapo C200 compact stand Small footprint Collects the cable to make the stand more stable. Camera twist on to fix it to the stand Printing Print with bottom down Supports needed under the tabs. No support needed elsewhere. Example Strut…
This model makes it possible to clamp down the C210 mount by joining the two listed models. This model is based on:
For adapt Camera TAPO C210 for Tripod
Remix of the model to attach to a 16mm diameter pole (common in grow tents) with zip ties. I used 3 mm zip ties, but you can just make the holes bigger if you want to use 5mm or something.
Eine recht universelle Kamerahalterung für die Tapo c200er Reihe, wird oben in dem 2020 Querprofil befestigt. Die mitgelieferte Montageplatte der Camera ist mit M4 x 12 Schrauben und Einpressmuttern befestigt. DIe Halterung ist oben am…
Inverted camera mount designed for tapo 360 degree security cameras to allow mounting the camera inside on a live edge , door frame or any 90 degree corner. The mount is designed to be fixed in place with command strips for easy removal…
Držák kamery Tapo na zeď, nebo krabičku 68mm
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
Stand for Eufy Security C210 2K SoloCam to be placed on outdoor cupboard or shelf.
I made it to install TP-Link C200 in IKEA's Lack for printer monitoring. I think that it can also be used for C210 and
Important: In order to combine the lid and the body of the card holder, insert a straightened paperclip through the top holes. A device I made to assist in organizing my desk space while practicing some NFC215 'modification'. The case can…
This model is designed to be printed in a FLEXIBLE FILAMENT such as TPU or other TPE. It WILL NOT WORK if printed in a rigid filament such as PLA or ABS. The loop can be stretched around the flashlight to settle in the slot for the clip.…
I printed the case and lids separately. (Latches can be printed with either) The lid does not require support and can use adaptive layer height. The case does, due to the print-in-place handle. I used Orca Slicer's auto tree supports,…
I was looking for TAPO camera holder on ALU profile 4040. I found and modified model for ALU4040 from this link https://www.printables.com/model/272093-tapo-200-inclined-stand-ceiling-mount-remix for TAPO models C200, C210
Indoor cover for TP-Link Tapo C211 and C200 cameras
Been wanting a better poseable worklight. Found out that the Sofirn SC21 can run while plugged into power, so I printed a mount that snaps onto Loc Line (½" ID Loc Line) and holds the light. It has a gap for the pocket clip and the rubber…
PLA / PETG / TPU -> transparent Works all fine, no support needed Update: Ich habe die Decke oben nochmal bearbeitet. Sie ist jetzt oben etwas Dicker. Der Druck hat sehr gut funktioniert mit TPU Transparent. Und sry ich hatte einen Fehler…
This is a mount for Fenix BC21R bike headlight. It connects to standard GoPro mounts. Photos demonstrate this mount used on QuadLock GoPro mount which I printed separately. Top part of the mount was taken from this adapter . I have…
Storage cubby to replace the original ashtray. Pieces are split with ~0.25mm upholstery material in mind and designed to be glued together. Uses the same bulb for illumination as factory but needs a different housing (HELLA-9FF 713…
Additionally Required Hardware M3 x 6 mm screws (ISO 4762, ISO 7380-1 or similar) 2x M3 hex nuts (DIN 934) 2x Adhesive tape (e.g. 3M VHB )¹ ¹ 3M VHB is only rated for up to 38°C (100°F) which could be a problem, depending on your…
Tapo C210 adapter to arm to use with base https://www.printables.com/model/337642-tapo-c200210-mount and arm https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed Use heated inserts to screw it to linked camera base.
fusion 360 file included for customization. change the number of rows/columns or spacing specific to your needs.
PRUSA XL ENCLOSURE MOUNT TAPO C210 CAMERA Can be mount on the right or on the left of the enclosure via m4 10mm screw and hexagonal nut. Printed in black PETG on it side with some support
This camera doesn't allow for a 90 degree screen tilt if you mount it to the wall. It's intended to hang vertically. This bracket allows you to mount to the wall and still have your monitoring screen the right orientation. File…
Inland ic210 USB Keyboard Foot Replacement foot for Inland ic210 USB keyboard. They also make an ic210 wireless keyboard so YMMV if that is what you have. Printed in PETG-CF with 0.8mm nozzle - not the cleanest print but it's functional.…
You can buy these from me here! This Skilhunt HB3 headband works great with the mount. This rotating 3D-printed mount allows you to easily attach your SC21 or SC21 Pro to any part of a 1" wide flashlight headband. Designed specifically…
Tapo C200 C210 C220 mount for the tukkari enclosure. Technicaly I've used https://www.printables.com/model/441856-tp-link-tapo-cam-c225-or-c200-wall-mount-screw, but Printables doesn't allow this due to licence issues which I don't…
Here is a simple design for Tapo C210 camera mount for Prusa XL Enclosure . There should be compatibility with more Tapo Cxxx cameras. I printed it with 0.25 STRUCTURE and organic supports on the build plate only. To attach it you will…
This is a screw-less, tool-free mounting solution to put any Tapo security camera with the round mounting plate (e.g. the C210) to the front edge of the vertical piece of an IKEA IVAR shelf. It works by plugging the back panel into 4 plug…
Tp-link Tapo C210 ceiling mount
This is to allow using a Guide PC210 thermal camera for electronics repair. It mounts a cheap 12 mm ZnSe lens (China PVD quality is what I used, these are cheaper) to the PC210. I have printed in PETG and used Hilbert Curve and 1…
Tested print in PETg, but I guess PLA would also be fine. I played a bit with interface layer of support made of PLA - support separates very well. It should also work well with normal support, or perhaps no support. I'd suggest printing…
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
As needed mounts for baby camera designed 2 simple wall mounts for Tapo C210 camera Hope will help someone :)
Low profile, compact c210/c245 soldering tip holder. It holds 7x c245 and 5x c210 soldering tips plus small compartment for specialised tip.
Flashlight holder for Sofirn SC21. Great for a night light. Use a brim for adhesion or the hook might warp outwards a bit. The one in the picture was printed in PLA, 0.12mm resolution.
PC21 Model, requires supports to print.
This is a mount for a C210 Logitech webcam for the FlashForge Creator Pro. It uses the enclosure screws. You'll need to take apart the "feet" of the webcam The v4 is 1cm shorter. Category: 3D Printer Accessories
Mercedes Classe S Coupé C217 Racing widebody
This is a remix, to make a suitable gearbox for C2162-6000 HP/Mabuchi/Johnson motor. This motor is scrap for Hewlett Packard Printers, (HP600/HP800/HP900) or similar models. Shaft is for a 3.15mm motor, 3.1mm 12 Teeth Module 0.8 Pressure…
30° angle mount for TP-Link Tapo cameras. Compatible with C200, C210, and C220. You need the original mount and screws that came with the camera. This is licensed as CC0, meaning you can sell it, remix it, re-upload it elsewhere. I ask…
A Miniware TS21 / C210 soldering iron tip holder for IKEA Skadis. It uses the T-Clip locating pin variant, so it shouldn't rotate. Should be used with low profile clips. I printed in 0.20mm PETG, others should work too. Print upright with…
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
No supports required. You'll need one M6 x 1.0 nut to superglue into the body of the print. Fits the GXV160 engine.
Halterung zur Kameramontage head-down am Fensterrahmen.
Simple tapo c211 camera mount for ad5x enclosure. I printed this one in ABS but any stronger filament should be fine
JBC c245 and c210 tip holder
![Amiibo NFC215 Card Holder [25x Cards]](https://media.printables.com/media/prints/17893/images/172568_b8cacc45-4e52-41ee-9922-92890853921e/v2_-_example_17893.png)
