21,679 models
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
My design of the cable holder for the Ender 3 S1. The cable does not bend in one place and fits nicely. It does not limit the maximum print height. Easy printing only one forced support. If you like my work, please support me with a…
A cable clip for the LCD cables. Should be a nice tight fit and hold them very securely. Jan 21 - Added an upsized version. The original was supposed to move relatively freely, then be held in place by the cables. The upsized one should…
Update: Extra hole for screw mounting ( d = 3 mm )
This is a cable reel for storing your cable quickly and in a compact manner. Just center it on your cable,wind it up and you're ready to go. When you need to use your cable, just pull the cable from both ends until you have the length you…
Wire / cable organizer, easily install and remove cables. One version accommodates 2 sided adhesive tape for mounting on any surface. A second version with screw holes for fastening down a more secure mount. This model is easily scalable…
This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…
June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be attached to the front with 4 M3 screws. When using my chassis you…
This my take on Prusa i3 MK3S Heatbed Cable Cover. I remixed the angled version so my printer fits better to the Ikea Lack table enclosure. Print instructions Unassociated tags: heatbed cable cover, prusa heatbed cover Category: 3D…
IKEA ALEX Cable Organizer. Print it in 2 sections to fit IKEA Alex drawer.
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
I like to screw my cable clips instead of using nails so I did these. The bigger one for normal cables can be used with Ø3mm or Ø3,5mm screws. The smaller one with Ø3mm screws Printing They are designed to be printed on the side with no…
I really liked the design by argoroots, and made a few tweaks to it: I added a rounded "gutter" for the wiring harness to nestle into; I split the gutter down the middle with a self-centering groove, so that it would tighten a little more…
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
Energy cable chain for power, data, coaxial and other cables. The chain is not open, the cables are inserted at the end of the chain. Optimized for 3D printing, three versions 20mm 50mm 70mm. STEP Files included. Printer setup: Nozzle…
Advised to print the small one first :)
These are the pain points I faced with cable organizers all my life! Even my own! So if they resonate with you this model is for you: Taking that one cable out of the pack is hell. The run between organizers is a tangled mess. Too many…
Removes strain from the x-axis motor connector. As the z-axis does not make fast moves, there is very little strain in the x-axis wire. However, the standard setup bends about the stepper motor connector. This strain relief moves the bend…
After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…
Quickly wrap and store USB charging cables around the home and office. Print in different colors to color code your cable organization. White for Apple, Blue for USB-C, Red for Micro-USB. ***New version added to accommodate larger cords!!…
über likes makes und follower würde ich mich sehr freuen, Peace MazZe I would be very happy about likes makes and followers, Peace MazZe
Update 2nd March 2024: Version 2.0 is now available , based on very useful feedback, thanks all. stl files can be dragged into any slicer for gcode. STEP files and SolidWorks files are provided if you want to add your own holes (for…
I got tired of reaching down to the floor to find my cable everytime i wanted to charge my phone in bed, so i made a cable clip so that it's always attached to my nightstand. Been using it for one month before this upload with no…
This cable tie base is 20mm square and just 5mm high; You just need to add some double sided tape. The openings dimensions are 1,5mm x 5mm. Enjoy!
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Cable management with table mount (up to 3 cm) 2 fixing screws
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Utilizing a retractable badge holder to keep the cable up and away from the print area.
Pin and Hook door catch/latch
This is a remix of a model with a space for the cable to charge your phone without you having to see it.
These dont damage the cables like staples. they hold the cable securely but they cable is still loose enough that you can slide and ajust it even when fully screwed down. Enjoy! And If you have a minute, check out my other models!…
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
This is a mount to attach the included screw mount to a flat bracket that allows cable ties to be threaded through to mount to a post or downpipe. Works perfectly alongside the solar panel mount . Requires two M4 x 10mm (approx) screw…
A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…
If you are looking to upgrade your old and boring knobs, here is the solution. I've been printing it upside down and my Ender 3 S1 Pro plate gave a surprising texture, in case you are looking for a clean front view I recommend changing…
So tired of untangling my ECG cables, or honestly watching my EMT untangle the cables according to my partners. One for each, 4-lead and 12-lead. Printed at 12% infill using PLA, will see how it holds up. It is a friction fit for the…
3D printed table clamp for cable management Cable Management : They guide the cables, preventing them from tangling and cluttering the workspace. This helps in maintaining an organized and clean workspace. Device Stability : They prevent…
Are you tired of the frustration that comes with tangled power supply cables? Look no further! This small cable organizer is the perfect solution to keep your power supply cables neatly organized and easily accessible. Designed…
Designed to lock and seal around a 12mm diameter by 8mm (max) deep hole while passing though a 4mm diameter (eg. USB) cable. I use this to power my dry box's wifi connected hygrometer.
After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.
Self-Adhesive Cable Wall Clip Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Easy to remove cables when needed. Can be scaled for different…
Remix of https://www.printables.com/model/321603-ethernet-cable-wall-mount
Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…
Vertical holder for Ugreen Nexode 100W charger. It includes cable holder to prevent damages on the USB C plugs. Print with supports. Stick it to the wall with double sided tape. Slots for cable should be able to take the Ugreen 100W PD…
New version of the Screwable round box with plenty of space for antenna-/ speaker cables and plugs. You can attach the box to the ceiling or a wall with up to 4 screws. The cover box consists of a lower removable part and a cover plate.…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 I was not so happy with the existing solutions for logitech webcam holders so I thought about it and created a new design and solved another…
[EN] This is a wall mount enclosure for Sonoff Basic with cable gland PG3 and snap fit cover. Enclosure has been tested with Sonoff Basic R2 Enclosure is printed from PETG with layer height 0,2mm. Enclosure outer size is (LxWxH)…
A simply cable channel to help tidy and hide cables on walls, desks, and floors. The length and capacity can be easily be modified by adjust scaling in your slicer.
A repair "kit" for USB-C plug casing. Depending on how much of the casing is missing, print “USB-C_cable_plug_repair_additional”. If only one side broke of then you can skip “USB-C_cable_plug_repair_additional”. Please also note the…
Holds 2x10 cables, hole diameter 7.4mm
After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…
Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…
Use 4mm wood screws with a 3mm chamfer flat head to attach the front piece. 3mm chamfer screws to stick this to the wall as well.
for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…
Do you have problems with messy charging cables all over your desk? Me too. So I designed this simple cable organizer witch doesn't requires any screws and slides right on your desk. Its designed for desks with a thickness of around 2cm,…
I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4. I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine…
Motivation I want to use solar panels of an old solar system (Conergy C175M) in combination with a Microinverter for a balcony power plant. [A: Panel groups connected in parallel] As the panels have low power values (compared to current…
This print contains two sizes each of two basic designs for a cable tie anchor that attaches to a surface with double-sided tape. The pictures should make usage fairly simple to understand. The sizes are chosen to accommodate ½" and ¾"…
I sleep in complete darkness and usually tape all things that light up in my room. The Ethernet cable port is harder cover up so made a cover for the lights instead. Photo of Device has duck tape residue.
Good for holding of iphone earphone cable. This holder is able to stand on its own.
Cable clips that fit to the back of the Prusa MK4/MK4S without hindering movement of the heatbed. Can hold 4 cables of ~7mm diameter (or more if they're thinner).
I've designed again the angled outlet cover, because the original one that lets cables go out straight, doesn't allow you to put the printer into a PRUSABOX made of IKEA components. The gcode attached in this project is for printing on…
From my Google Lens search, it appears this handle fits between a 1994-2004 GMC/Chevrolet model vehicles. I made this handle from scratch. It took me about 6 prints to get it just right while also improving it so that it cannot break. You…
Screw Mounted Cable Zip Ties 3.6mm Width, M3, M4 & M5 Heavy Duty No problem…. Zip Ties set (150/300mm) x 3.6mm Width Screw Size: M3, M4 & M5 x (20/25/30/35/40/50mm) Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere…
This 3D model is a clever cable organizer designed to keep your cords tidy. It features a “print-in-place” design, meaning no assembly is required after printing. The tolerances are precisely set at 0.15mm. You can secure it with a screw,…
I know you have a drawer full of random cable ties… we all do! Now you can finally sort them with this practical organizer . The best part about it: you can mount it to the famous HSW with two small M3 screws ! Watch this video for more…
Get rid of messy cables
Ein Kabelhalter für Kabel bis zu einem Durchmesser von 6mm, Sie benötigen zum Fixieren des Halters ein Stück doppelseitiges Klebeband oder einen anderen Kleber. A cable holder for cables up to a diameter of 6 mm, you will need a piece of…
WARNING: Tilting could still cause strain close to the connector in front of the facial interface.
Protect your board with this case
I made this for a Roland FP-E50 digital piano with the KSFE50 stand. Keeps cables and power brick hidden behind the crossbar of the stand. Can probably be used with other piano stands, crossbar is 15 mm thick. There is a also a holder for…
0,20 quality 20% infill
Description – English This 3D printed cable section tester lets you quickly identify the cross-sectional area of electrical wires in metric units (mm²) , including the outer insulation . Designed for electricians, makers, and DIYers who…
This is a simple little print that I found very useful for keeping the USB adapter and cable organised/together with the SSD. I printed this in Overture TPU. It prints in under 20 minutes in TPU. It prints in under 10 mins in PLA/PETG.…
Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside. This clip allows you to place the…
Cable chain system with 25x15mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 40mm bend radius. Your printer should be able to print 0.2mm…
[English] Holder for four Oral-B or compatible electric toothbrush heads. The base has a diameter of 60 mm, providing good stability. Each slot for the brush heads is rectangular, measuring 6.8 x 3.5 mm with a height of 14.8 mm, ensuring…
Esta es una ampliación de la base de la pata de cabra de la moto KTM 390 Adventure. Sirve igualmente para la DUKE 390, no se si para otros modelos. He comprobado que las bases de la pata de cabra tienen ligeras diferencias aunque sea el…
Improved cable chain for better cable harness retention. Especially without cable braiding. There are two variants: full support - Chain, half support - Chain_2. Printing I used a 0,4 mm nozzle, 0.20 layer height, 15% infill, perimeters -…
Kompaktes sumup Gehäuse für den sicheren Transport. Mit Schiebedeckel und Kabelfach. Der sumup kann durch drücken auf die untere Hälfte leicht aus dem Gehäuse genommen werden. Compact sumup case for secure transport. With sliding cover…
easy snag 12 Gauge extension cable to cable reel
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…
Large and small drawer dividers for 30- and 39-drawer cabinets. Fits these cabinet models: Craftsman CMST40730 and CMST40739 ArtBin 6830PC and 6839PC Stanley Tools STST40730 and STST40739 Black+Decker BDST40730FF and BDST40739FF FILES…
Hello, Simple but functional Husqvarna lawnmower cable holder for model LC356VP. I have modelled it after the original part for a friend and I printed it in 100% infill, both PLA, PETG and ABS (wanted to try out all plastics to ensure how…
Wanted a way to make all the cables look neater on our IKEA FJÄLLBO shelf which we filled with our aerogrow hydroponic gardens, and a cat water fountain. So, designed and printed these clips that snap right on the verical metal bars of…
(English below) Modell eines Audi Cabriolet (Typ89, Baujahr 1991-2000), entweder in der Ausführung "Serie" (seriennaher Zustand) oder “Tuned” (mit Tieferlegung und Rieger RS2-Frontschürze). Es eignet sich ideal als Schlüsselanhänger für…
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
This cover is a remixed version of the Z stepper motor cable covers with more wiggle room for the cables to bend. I created it, because I felt the original cover where the LCD assembly cables leave the frame provides insufficient guidance…
EN: Small hook for attaching a thin coaxial cable with an outer diameter of approx. 4mm. Use countersunk head screws with a diameter of 3mm for attachment. Print without supports. CZ: Malý háček pro uchycení tenkého koaxiálního kabelu o…
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Enjoliver un enjoliveur ;-) de roue tôle avec un logo blanc et noir collé au centre de celui-ci
Celebrate your love for the woods with the Outdoor Life coaster—a rugged yet classy design made to bring the outdoors in. This model uses purposeful extrusions to guide flawless color swaps and includes a .3mf project file with pause…
A couple of years ago I broke part of a joint to an Outwell camping locker. I temporarily repaired it and now, thanks to a Prusa MK3S+ 3D printer and Fusion 360°, I've designed and printed a new one. I haven't installed it yet, it may be…
The model is fully made of plastic. The pin must be driven in and secured with glue or the tip must be slightly melted with heat. On one side, the pin is wider and blind. If you need to use too much force to press the clip, lightly trim…
Print as oriented and clip into place. Note that the version in the photos is very slightly misaligned, but that issue has been corrected in the finalized model (but it works well enough for me so I didn't bother reprinting). Original…
![94-04 3rd Door Handle for Chevy S10/GMC Sonoma Extend Cab [Handle Only]](https://media.printables.com/media/prints/222498/images/2035579_b4df1ecf-e043-47cd-ab54-777467923c9f/print-measurements.png)
![[OECC2] 25x15mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161407/images/8915763_c379734f-27b4-49d9-aa5e-6aaf6c7de211_d0d3623c-9690-49de-8063-aed342546209/b87460c0-58f0-49c7-a329-0dfc596cf033.png)
