Counting matching models…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 Also inspired by https://www.printables.com/model/250550-gridfinity-magnet-light-baseplate Optimal settings:…
Get the original HERE ← Prints on its back. I filled in the original model most of the way to get it to print no supports.
Update 15.03.2025: Added a simple cap for the screw holes on request by @Codejoy_48654 In order to free up some room, i decided that i wanted to store my cameras on a wall mount, thus designing this simple Arca Swiss style one. V2 and V2…
If you have to drill something on a ceiling or looking upwards, this may help you by capturing the dust and debris from falling into your eyes. The f3d file can be opened in Fusion 360 to alter the dimensions if needed. If you liked this…
After printing about a dozen of my earlier revision I decided to improve this by capturing the magnets inside the print. Now there is a pause at 2.6mm to insert the five magnets. This way there is no gluing or pressing magnets into place…
Took the fantastic model by cadandcookies and made minor modifications: Reduced tolerances on ¼-20 nut size. Added sacrificial bridges to the captured nut holes to allow them to be printed without supports. The part shown in the photo was…
Note: Several of my designs (and remixes) for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
For the printed model, it's necessary to insert a spring from a pen. It can be printed in one piece and without supports. I recommend PC Blend Carbon Fiber or a similar, more durable material. The backcover uses the 1cm-uni-mount system,…
Second Version I was trying to use the David D version of this print to stop by chickens from perching in an area. Those crafty girls decided they could “fix” it for me and was in pieces the next day. This bracket is a bit more rigid,…
Sick of debris being in flat bottom sink
I recommend full supports, but build plate only might work.
I was at step 12 of Prusa Knowledge Base | 6. Electronics and MMU2S unit assembly (prusa3d.com) and I had the spring disappear somewhere in my room (there is no spare in the kit). I want to help others from suffering the same fate. I made…
I tired of reaching for calipers to size the same nut again and again with every new project. This gauge has four hexagons for each nut type (-0.05, nominal, +0.5, and +0.10mm) arranged in columns. Each row is for either a locking or…
🌌🦉🦔🦋 Dreamcatcher Collection - Capture Dreams in Style! Key Features: 🪞 Base Plate Design: Each dreamcatcher features a beautifully crafted base plate that serves as the foundation for capturing dreams. 🌟 Ornamental Themes: Space: Embark…
Netsuke - Shoki capturing an oni These netsuke figurines are meant to be hung from the clothing and /or purses of the wearer and in so, often don't sit flat on a surface. I am leaving the models as is but if you would like them to sit…
The capture plate was a sagging when used on my backpack. This support plate better distributes the weight on the chest like the "pro plate" that they sell.
I, originally, printed the XL Camera Mount | Buddy3D for the XL Enclosure and noticed I could not capture the entire print bed as the head of the Buddy3D camera could not tilt any higher. I duplicated the mounting base and rotated it to…
I added some snap geometry. Now it snaps in position.
I wanted to mount my Peak Design Capture Clip v3 to my shoulder bag strap. The thin strap material meant that when secured, the bolt ends would be exposed. Exposed bolt ends are abrasive to clothing, so I designed this stackable spacer to…
Attempting to tidy up my life and needed a little mount for the Elgato Capture card. Sleek design to ensure the unit sits flush with the front. Printing: Can be printed without supports Took around 60mins on Bambu Attaching: 4 countersunk…
This is a knob for an M5 bolt. I wanted something that didn't use the heat inserts and I wanted the nut to be buried. So I designed this based off of a matchfit knob. You have to insert a pause exactly at 8mm. At this point you insert the…
UofH UH University of Houston logo with or without captured magnets. When slicing the captured magnet file be sure to set the color change just before the cavities are covered. It will be a snug fit with a 2mm magnet. Be sure to check the…
Update 6/29/22: Added a version with a centered ¼-20" thread and no boss (i.e., MagSafe compatible). Use caution – this will be less secure than the SlimLink version. Update 4/27/22: Added a version with a centered ¼-20" thread A magnetic…
Sculpture of Nicolas Maduro being transported to NYC, comes in two versions: split and full body. Split is better quality, but leaves a line that would need to be filled and sanded prior to painting.
Best if printed at .2mm layer height, with a brim and standing up (except for the sacrum pad). No supports are needed.
I was learning how to model custom nuts and bolts in Fusion 360 when I had the idea to create this fidget toy. The bot has a stopper at the end to keep the nut from spinning off. I printed the nut and bolt with PLA at 0.20 layer height…
I wanted to make a very compact recording/streaming PC and this is what I came up with. I used a Uctronics UC-747 HDMI adapter, Uctronics UC-586 (but any 800x480 5 inch screen with the same tabs should fit), and an Acasis VS-041 /…
I always leave the Peak Design Capture Clip plates on my cameras, but also wanted to use this fantastic gridfinity bin for the Sony a6700! I've added two different versions - one should fit the smaller Peak Design Capture Clip plates,…
2x2x6 bin with a shape for the Capture Clip V3 from Peak Design for convinient storage.
Remixed to optimise for the capture clip, tighter tolerances, less overhangs, shaved off a part to allow more flexibility on the gopro Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill:…
Heyho You can install the part to get more comfort or to attach it in places that were previously not possible. In addition you can use cable ties to give the part additional support. Scaling Scaling is a very important factor with this…
See this video for documentation: All parts printed in black ASA (aside from LED diffuser). Scaled to be dimensionally accurate. UPDATE (September 16, 2026): Switched over all files to latest case revision for the 2 RGB LED boards.
Plug a drybox closed and capture/retain filament in it so that you don't have to open the dryboxes to fetch filament . It clips to a PTFE tube when not in use. This .3mf now prints well on my printer and this particular PETG filament, but…
I needed a low profile captured nut knob…. so here we are! I made it a very tight press fit… I'd advise using a vice to gently coheres the nut into the print. Printed with Inland PLA+ on a Bambu P1P on “Slow”/"Silent" 3 walls and 35% infill
Pop in wing clip to hold plastic trim on copy of generic clip
The 3D-scanner is built from a kit named ‘openscan basic’ available at https://www.openscan.eu. I printed the plastic parts myself. The original model has been established by putting together 80 photos from different positions via…
As the proud owner of a new to me Tascam Portacapture X8, I really wanted a case for it. But for some wild reason, there are very few dedicated examples on the market that protect this rather fragile piece of gear. I quite liked how the…
Infill=15% Quality=0.20 doesn't matter that's what I did though. Supports=I would use supports under the ball. Paint them on if you have prusa slicer.
Sony A7III Grip Compatible with Peak Design Capture It's really simple accessory, because for someone with thicker fingers it's hard to reach the release button, but it works for me. So it's worth printing, if find the grip on Sony A7III…
This is a 2 part print in place nut that is captured on the bolt between two fixed ends and is basically the same print as the impossible nut I posted but I added a top and bottom to the bolt to make it easier to hold. I included both the…
Just tidying up some of my earlier uploads to something a little more presentable ; ) Cheers Jace
Please like and follow and post your makes. I printed a Texas A&M magnet from another user and I was not able to use it with only two magnet holes the print was too heavy to hold. I decided to make my own design with available artwork…
This is my first submission while I wait for my MK3S+ to arrive. Expect great things.
Hello Friends! Here is a system to replace the classical adapter of the Mannfrotto light 290 Tripod original one in order to be able to directly snap on you camera with a Capture Plate (from Peak Design) mounted on. Here is a video on how…
This modular game was created for the Building Blocks Contest, and allows players to create an infinitely large and diverse terrain for infinite gameplay. To set up the game, create a stunning world unlike anything you have seen before.…
Introduction This is a mount designed to attach a Peak Design capture plate to an old style Hydroflask 32oz or 40oz wide mouth bottle. Compatibility This design is intended to be used with a lid that is only removed for refilling, not the…
"Capture the Flag" is a popular catch game that is usually played with several people outdoors or in sports halls. The "Capture the Flag Boardgame" is based on this team game and brings the fun of the game home. A fast and strategic board…
I don't like to carry a tripod under the best of circumstances, let alone while I'm hiking. But I do like taking some scenic shots of the night sky. So I made this stand to hold any camera at a 15 degree angle, attached with the Peak…
In astronomical imaging it is important to capture dark frames and bias frames. This filter allows you to obtain such frames.
Introduction When you change something in your mechanical ventilation system, it’s a good idea to double-check that all vents still deliver enough airflow for a healthy indoor climate. Pro measuring tools are pricey, and the DIY versions…
Ô ĂN QUAN (Mandarin Square Capturing) This game is one of the Vietnamese traditional board games that very popular during my childhood. SETUP: Each player places one big stone (named the “Mandarin piece” and it is equal to five citizen…
Daniele used the Revopoint RANGE 2 to scan this bass-relief statue of Madonna delle Grazie outside.
EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder Print with ASA or ABS (high temperatures…
What is this? A modular rigid body system for optical motion capture, designed by a researcher who actually uses these in real experiments. Instead of buying overpriced proprietary rigid bodies, print your own with unique marker…
Da sich die original Halterung sehr leicht von der Ablage löst und verloren gehen kann, ist dies interessant für alle Captur Fahrer. Wenn man es in PETG druckt, die Schrauben nicht zu fest andrehen. Teil kann sonst zerstört werden !!!…
Adapter to hang a camera with a Peak Design Capture plate screwed onto it on a pegboard*. The start of getting my photo gear onto a tool pegboard for easy access. Since the Capture plate is symmetrical, the camera can be put in any of the…
Goal: a new high current loop key design that is: easily 3D printable captured / self-contained / no losing keys or carrying another fob compact & small footprint secure mounting locks out when powered down slick looking reliable Specs:…
This model is for those who wish to document their projects with photos or videos. It's helpful to review a video, especially when dismantling a more complex assembly, and you need to redo the steps for reassembly. I hope you find it…
The GPIO Hackerboard is a great addition but it doesn't come with any good options for placement or retention. Enter a low-profile, fast-printing holder that sticks anywhere a magnet will. The cutout on the bottom should prevent…
A cute ghost in a cage!
Discussion This assembly replaces the outer HEPA filter housing on the Prusa XL Enclosure adding: Quick Access to HEPA Filter for Maintenance purposes Removable connection to 2.5" exhaust duct Both parts are magnetically connected to the…
Print the R7_Grip_Extension_PeakDesign - model.3Mf file, not the OBJ! Hardware needed: 16.9mm ¼"-20 bolt, I used https://www.smallrig.com/smallrig-hex-screw-pack-12-pcs-1713.html 7mm 3/8"-16 to ¼"-20 adapter, e.g.…
Original model is great, just added magnet holes as per my preference.
Ce place sur une bouteille de vin
Elevate your space with this striking 2D wall art featuring Prime Minister Narendra Modi's iconic visage. Celebrate his dynamic leadership and global impact with this captivating piece, perfect for showcasing your admiration through 3D…
Renault Captur under-radio plug
possibility to choose from several options
Print from durable material (i.e. PETG) in (semi)vertical position to guarantee the perimeters reach the holder arms and allow flexibility. Horizontal print guarantees breaking off of the arms on the layer-layer connection. Printed with…
Measurement device for measuring if robots in the RoboCupJunior Soccer competition “swallow” too much of the ball to make sure it is always possible for opponents to recapture the ball. See https://junior.robocup.org/soccer for details…
The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with…
A little bumper to prevent the anchor/clips rattling and scratching the camera. I made this mostly for the Capture Clip as the wrist strap rattles while walking. Print with the open end on the build plate out of TPU. To install place over…
Simple cable clips that can be printed in vase mode or with a thicker base and screw holes. Extrusion width should be at least 0.8mm. Pictured is cable-capture_7d1.2o7s_x5_vase which fits single USB cables fine. I recommend the 10mm 0.6mm…
This model seals the picture in the frame. The picture is captured and can't be removed without destroying the frame. You have heard of capturing magnets or bolts in a plastic model; this model captures the picture. The result is very…
This holder attaches a bobbin to the corresponding thread spool so you can store them together in place. Based on the v5 from the original version. FreeCAD file included so you can adjust it, but warning, it's a laggy file.
Made smol holder for my UGREEN CM630 4K USB capture card. Adhesive mounted. You have a choice of 2 options: V1 - less material but small adhesion area. V2 - needs more material but have larger adhesion area plus 3mm mounting holes if you…
A 3D capture of a liquid simulation done in Blender. 0.15mm layer height 15-30% infill No supports needed
A quick remix of Schnipp's fantastic Two Way Bolt, with a lengthened shaft and a bolt head on each end to keep the nut in place. Make sure to check out the original! Printed the nut separately, then printed the bolt vertically using the…
My grandson is fascinated by marble mazes and ball runs, but he has a younger brother who will attempt to swallow the marbles if given the opportunity, so i thought an entrapped marble maze was just what he needed! Designed specifically…
This is a simple hand-held mount that we designed in 2014 for a pair of Canon PowerShot A4000 cameras to capture synchronized stereo images or video. The camera mount is our own design, holding a pair of A4000 so that the stereo baseline…
This is a dice tower with hexagon tiles by Nacelle on Thingiverse, ideal for Catan. (reupload) original can be found at: https://www.thingiverse.com/thing:4266921
This novel curiosity rattles when you shake it. It consists of 2 separate matrix of cubes with one printed inside the other. The smaller matrix is -3 the size of the larger matrix. The smaller matrix is not attached to the larger matrix.…
There are one or two 3D printable shelves on the internet designed to hold a Sony A6100 Camera but none are designed to accept the camera without first removing the Peak Design Capture plate. The shelf holds the camera ~18mm Away from the…
The funnel adapts to the shape of the nuc, making it easier to deposit the bees. The funnel does not obstruct the sliding bottom of the nuc. This model is dedicated to APIDEA mating nucs. L'entonnoir s'adapte à la forme de la ruchette, ce…
Description ⌨ English ⌨ "Custom Stand for Capturing the Magic of Light" Discover the stand specially designed to integrate the Philips Hue Play into a 3D printer enclosure.! Capture stunning photos of your luminous creations with this…
Use 2x M3 bolts to capture charger with 5mm thick tab. I created this around the battery for the bissell prolite stick vacuum with the detachable battery. Not sure what other vacuums this works with.
for this little guy self explanatory due to positionion supports are suggested unfortunately comments or suggestions on a prettier version are welcomed!
Davide captured this bust of Pope Innocenzo XII in the Museo di Roma with his Revopoint MIRACO. Size: 63 x 56 x 40 cm
Kristen Stewart 3D Lithophane: Capturing Iconic Beauty in Relief!
Effortlessly harvest rainwater that clings to your downpipe walls! This insert fits snugly between standard 75mm rainwater pipes (5mm wall), redirecting water through a 12mm hose connection to your barrel or tank. Excess water flows…
Imprimir en vertical y ajustar el tamaño para que entre bien la capturadora en el soporte.
Simple filament cutter for < 2mm filament that reuses the extra Bambu filament cutters. Print as oriented in 3mf file. No supports needed. Need to pause at layer 27 and 166 to insert the magnets. Magnets should be 2.7mm thick by 8mm wide.…
The MINI 2, with its 0.02 mm precision and powerful blue light, provides an exceptional experience.
This is a Case for Pi 4 and Pi 5 that supports the Geekworm video capture hat. The hat routes HDMI input through the CSI-2 port on the Raspberry pi so that it behaves more like a pi camera. It also has a low latency HDMI loop back to get…
Daniele used the Revopoint RANGE 2 to 3D scan the left column of the church dedicated to Madonna delle Grazie.
Let your Valentine know that your heart is theirs by making them a You've Captured My Heart 3D print! You can set your captured heart on any flat surface or hang it using the ring at the top of the cage. PLA version: PETG version: The…
Was just seeing if I could do it. Probably don't need a skirt, but I have adhesion anxiety. I used black duct tape on the back of the quarters (on like the 3rd attempt). Drop the quarters in place, tape side up, on layer 21-22. layer 23…
Daniele used the Revopoint RANGE 2 to perfectly capture this motorbike saddle. Shop now with Exclusive Code: COMMPR12.
A simple adapter to use the Peak design capture plate with a T-Echo. mounts to the back of the Echo with 2 M3 6mm screws. Button top or pan head screws work well, socket head screws may interfere with mounting plate.
This is compatible with BM N1625 type zip ties
