15,373 models
Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Print approx. €5.59–€6.83 excl. taxPreliminary estimate for one variant
Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
No support needed. Use 4x20 mm wood screws without predrilling.
Print approx. €6.55–€8.01 excl. taxPreliminary estimate for PETGSource material: PET
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for one variant
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
IKEA don't sell replacement glass lampshades for their common TÄRNABY table lamp, so this was my solution… Original single walled vase mode print worked well but was a little flimsy so I decided to use a lattice vase mode technique I've…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Tested it on my headphones, a tight fit but will surely work. I have added working height adjustment brackets too.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…
Print approx. €6.29–€7.68 excl. taxPreliminary estimate for one variant
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
The clip on my Skoda Fabia has broken for the second time. I drive on a route where the sun often hits from the side/front. The cover, metal clip, and screws are reused from the original. The model requires a support structure and should…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
DeWALT has a awesome heavy duty miter saw stand (link below) that is fairly easy to use as there are two clamps on the bottom of the miter saw that clip on too the stand. When somebody dropped the miter saw one of the black clamps on the…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Monkey Skull Chalice. HOW TO VID.
Print approx. €14.90–€18.22 excl. taxPreliminary estimate for one variant
War of the Ring Army Token Repacement. Orginal tokens are boring and easy to overlook.
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
A holder for square bottles of Tamiya Plastic Cement. Fits the Skadis / Skådis system of pegboards. Print it with three perimeter walls and at least 15% infill to make sure that the pegs are structurally sound. Enable support to make them…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I broke an SD card, to back up the data I printed this case. you can modify the attached step file
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
If your PS5 DualSense thumbstick cover is worn or torn, this replacement cap is an easy solution. It snaps securely onto the existing knob, restoring the functionality and feel without replacing the entire thumbstick. Print Details: Layer…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
We love CA glue, but the caps tend to slowly accrue glue until they no longer fit securely, or you just lose them! This is a quick print that fits snugly on the Bob Smith Industries CA glue nozzles. The model is accurate to the standard…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Peacemaker is hot right now so Peacemaker logo! I initially designed this to be a coaster, but you can totally slap this on your chest, use a toilet seat as a helmet, and be a beacon of freedom! Designed to be printed at .20mm Yellow up…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
I have designed this to replace or enhance the looks of frames around wall sockets. This should be compatible with Gira's system 55. Suitability for any purpose is not guaranteed! Install at your own risk. As always, be very careful when…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
This is a slightly modified version of the bottom reinforcement to have a tighter fit with thinner plastic. The original bottom reinforcement was too loose on the thinner plastic sheets I'm using:…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Design Originally I was using a simple cap to protect USB dongle when storing it in its carry case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to loose it Then I discover the cool design →…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Made for a 1990 Chevy Blazer, Chevrolet and GMC trucks from 1973-1987 as well as Blazers and Suburbans through 1991. Giving credit to AzJake for this Design ⬇…
Print approx. €5.16–€6.31 excl. taxPreliminary estimate for PETGSource material: PET
A side-by-side comparison of the low poly version of a model that you can download from Models-Resource and the resulting model after Displacement Magic in Blender and some basic sculpting. Video Coming Soon. Very similar to. FYI you can…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for one variant
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Replacement part for Seat Ateca parcel shelf. Might fit other car models but didn't test that. Print the pins as shown in the picture (more strength). I used a 0.3 [mm] layer height (should only be functional) and PETG and it works like a…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Printed in ABS with 100% infill
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Print approx. €10.50–€12.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Drone Parrot Bebop 2 landing gear replacement. Printed with Nebula PLA filament 15% infill.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
I recommend printing the wheel upside down. That way, the first couple of layers will be radial ridges. The first “full” layer that sits on those ridges should be made all perimeters so that the bridges are perpendicular to the ridges…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Whistle not included! There are two variants: Signal-Whistle-Replacement.stl Version with cutout for a 42mm x 4.5mm (diameter) ferrocerium rod. Signal-Whistle-Replacement-Simple.stl Non-functional spacer part, just to keep the space…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Replacement hose connection for Miele vacuum cleaner. -you will need a M4x30 Screw. -for D=42mm hose
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Multiple knobs from my Frigidaire drop-in range were broken in various degrees. Replacements are expensive, so I modeled this myself in Fusion 360 with measurements taken from a mostly working knob. I printed mine in ASA/ABS for heat…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
My father was having issues with his stove knob breaking. I was just getting into design and I was super excited to try my hand at recreating his stove knob to fix his issue. And that is where this model was born. Here is the serial…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
!!! THIS WAS DESIGNED FOR RAZER BLACKSHARK V2 ONLY (almost) !!! Based on what I found online the V2 PRO (old model before 2023) should have the same earpad frame as the normal V2, while the V2 X and V2 PRO 2023 edition have another kind…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
I was fed up with trains derailing over the official 5208 track piece so I thought I would make a replacement that had better track interface and would work with all variants of the 5000 series track. Modeled in Solid-works, printed at 45…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Les pièces d'origine s'effritent ou se cassent avec le temps. Ce kit est un complément à “ Verrou volet battant” qui est présenté à part du fait des ses spécificités pour l'impression. La particularité de ces pièce est liée à l'exposition…
Print approx. €10.10–€12.34 excl. taxPreliminary estimate for one variant
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET
This stake has a 18mm diameter cylinder to allow outdoor lighting to fit over the top. There is a slot in the cylinder where a low power wire can pass through. This model was printed using supports from build plate only. The notch should…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
I've only had my 3Dconnexion Wireless SpaceMouse for a few days and I'm already super worried about losing the USB adaptor. This little handy gadget is a 3Dconnexion SpaceMouse USB Holder. It fits perfectly around the SpaceMouse and the…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A replacement part for the rear feet of the Sharkoon Skiller Mech SGK3 keyboard. The original feet start to crumble after a few years. This replacement was designed as close to the original dimensions as possible. They nicely snap into…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Replacement shade for ‘Bankers Lamp’ type of lamp. Original glass shade broke during transport and original replacement ones are bit expensive ($20-50), so why not to make better one :-) Fits and works perfectly, printed in PLA which is…
Print approx. €16.79–€20.52 excl. taxPreliminary estimate for one variant
CZ: Můj pokus o náhradní kolíček k sušáku IKEA PRESSA. Ačkoliv se nejedná o remix, podobných modelů najdete spoustu. Místo problematického “ohýbacího místa” se otáčí kolem osy. Print-in-place tisk, celý kolíček i s čepem a otvorem se…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy to print drop-in replacement for a Schluter-KERDI-LINE Strainer (hair catcher), model KLVZSF. Design notes The shape is different from the original, but designed to fit into the drain outlet. The tabs are designed to…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Needed a replacement for the wand portion of the Clorox Toilet Wand system (https://shop.clorox.com/products/clorox-toiletwand-system) This is in 3 sections. 2 of the sections screw together with the third part used to reenforce the…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
This was a quick replacement for the original hitching rail, which was broken and made from a material that could not be glued back together. I recommend printing it upright to get a nice round rail. I used PLA from Das Filament in…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
I made a replacement for the ½ inch to ¾ inch water valve-handle in the photo. Why? Because I wanted to control it using a zigbee smartvalve motor from Nous. But alas, the handle is not long enough. So I parametrized the replacement…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Pressure key is printed with ASA and need partial supports. After printing, the part was grinded and smoothed with aceton by spraying.
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
A replacement foot pedal for the Tramontina 13 gallon step trash can available from Sam's Club. Two versions of this print are available: Standard version (does not fit the MK3S+ print volume) Chamfered version (fits MK3S+, matches OEM…
Print approx. €24.85–€30.37 excl. taxPreliminary estimate for PETGSource material: PET
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
printed at 100% fill + 0,1mm layer, 0,4mm extruder, PETG, print wiht base supports, works well
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Second hand Roco N Scale crane came without a mount for the beam on the tender , and the hook was missing. Created a replacement , and fdm printable on slow speed. ( might need a few tries ) made to rotate ( use M2 or M3 boult and nut ) ,…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This is a replacement part for the clips used on Vaude rolltop bicycle bags
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…
Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
This is a replacement latch for tubs/totes I purchased at the container store. The manufacturer is IRIS. There are many sizes but the latch seems to be similar with all the weathertight ones.…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
EN: I bought water canisters from Campinggas a year ago. These had a tap at the base for drawing off water. However, this was never completely tight, so 1 year ago I designed a cap for this opening. (See…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
After having this OEM replacement handle break after a year, I looked to see if I could 3d print one for less. Found the original model on Thingiverse and gave it a shot. The original had sharp edges that didn't feel great on your bare…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
EN: Had a lid with a diameter of approx. 23.5 cm where the existing knob broke off. The hole for the screw measured 4.7 mm. I wanted the stem of the knob to also fit through the hole in the jar as a centering device and I also needed a…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Our kids love their Dyson toy vacuum. So it gets used quite often and from time to time looses its buttons. Most of the time we find them and put them back in, but lastly one got lost, so I made this replacement which fits very nice and…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
This was designed not to require supports, with a .4mm nozzle. The bottom of the knob has a whole designed for a M4*6*6 brass insert. One of the best ways to insert the insert is with a soldering iron tip, press the insert in until it's…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
This model includes replacement buttons that you can glue in your damaged Smart key fob. You can get replacement plastic cases relatively cheap on eBay but then what would we use our 3D printers for ;) It is parametric and can be adjusted…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for PETGSource material: PET
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for PETGSource material: PET
3Dconnexion SpaceMouse Pro Cover quickly slipped over dust protection for the spacemous pro
Print approx. €6.40–€7.82 excl. taxPreliminary estimate for one variant
This is a replacement gear for a smart blind automation motor. I bought several of these motors and after 5yr the plastic gear inside each has started to disintegrate and crumble. The stacked gears in the motor are mostly metal except for…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This design is a quick and easy replacement for a lost popsicle stick. It is not round like the original, but doesn’t need to be to function. It also prints with no support.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Description The original wheel on my Roomba had its splined hub stripped, so I designed and printed this replacement. The wheel disc is printed in PETG , and the tire is printed separately in FLEX and then assembled. The original parts…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
This replaces a worn bearing for the serving tray of a 1960s Bremshey Dinett folding side table. You'll probably want to print this in Nylon or IGUS Iglidur filament. To replace the bearing, pull out the metal rod that is supported by the…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
This is a replacement Triple Action Airway for the ACTAR 911 adult CPR training manikin. You can see a comparison of the original piece and this model in the photo. Design notes: The overall external dimensions are the same as the…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
