2,209 models
The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join. There is a holder for the HW-585 12V fan controller You will…
Print approx. €10.11–€12.36 excl. taxPreliminary estimate for PETGSource material: PET
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…
Print approx. €2.87–€3.50 excl. taxPreliminary estimate for PETGSource material: PET
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Be careful when making candles, hot wax can burn you. Printed parts: Form 2x Clip 2x Bottom 1x Wick holder 1x (not necessary) Don't forget to turn off top layers and infill for the top of Form part. Use the modifier as shown in the image.…
Print approx. €4.11–€5.03 excl. taxPreliminary estimate for one variant
Fits any 80x80x25mm PC fan Visit website for more info
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
A working cooler for a single can of your preferred beverage, take a small break and have yourself a custom cooler drink---you deserve it! Or, in my case, it makes the perfect Father's Day gift. The main body of the cooler comes in two…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Hello, I'm industriel designer, I usually draw on Rhino3. I made an extruder motor cooler which has the particularity of being positioned in the axis of the extruder. This is for new MK3s+ but also corresponds to the Mk3s model. The…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
I've just designed my own small Stepper Cover to cool down the Stepper to an save Temperature. It's to avoid smelted Filament because of a hot Gear. The Cover snap's onto the Stepper Motor. It produces a small but enought Airflow to do…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
This is a slim and significant lighter stepper cooler for a 40mm Noctua fan. It is lighter because it works without screws. In my tests the stepper is not geting warmer than 45°C. The shaft with the drivegear stay at nearly the same…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…
Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant
Upload your makes, i would love to see them.
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
A minimal adapter to take your Intel LGA 115x socket coolers and put them onto AMD AM4 socket CPUs. For the AM4 side, screw in like normal, on the LGA115x side, use M3 nuts and bolts to secure. DO NOT print this in PLA! PETG or ABS/ASA…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
Die Halter werden einfach aufgesteckt, habe sie auf einer 240 Liquid Freezer II verbaut, sollte aber auch auf die anderen Modelle von Arctic passen. Da die erste Version aus pla war und deutlich instabiler Gestaltet war habe ich sie nun…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Cover modified to Fit HexCase Cover added clearance to IceTower by .5mm per side Base modified to match HexCase Snaps (interchangable) Collabortive Project with WeakNerve ( https://www.prusaprinters.org/social/9859-weaknerve/ ) Concept…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
The passage through the wall is made for a wall thickness 100 [mm] +/- 10 [mm]. The exit is made for a wall thickness 5-15 [mm].
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
Fits any 80x80x25mm PC fan Find gcodes for the most common printers: www.river.family More info about Yuki Air Cooler: www.yukiairconditioner.com Pokemon model by Herrecoco Idea by Eltelierworks Any feedback is much appreciated! :)
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Fits any 80x80x25mm PC fan Find more models and gcodes: www.river.family More info about Yuki: yukiairconditioner.com Any feedback is much appreciated! :)
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Hoth Snow Speeder ATMOS Cooler Badge. + Solo Hoth Snow Speeder. USE AtmosSnow for Cooler badge.
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
This cooler will reduce the temperature of the extruder by about 8° Celsius. Especially suitable when the printer is troubled by "Heat Creep". It mainly helps when the printer is inside an enclosure. Suitable for example "PLA Prusa Galaxy…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Keyboard stand for displaying Your keyboard on the side of the Cooler Master QUBE 500 Flatpack PC case. Two parts for easier print. May need a liitle bit of supports on overhangs. Models already oriented in intended print positon.…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for PETGSource material: PET
Clip sujeción para el cambiar el ventilador original del Fryzen 120RGB Deepcool por un Be Quiet! Pure wings 2 Densidad de relleno 100%
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Replacement hinge and pin for Igloo cooler 2 screw hinge. I reused the original hinge pins but included a printable pin in case yours broke.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
I made a remix of a extruder motor cooler. This is for the new MK3s+ that has some airflow over the Bondtech gears. This one uses both openings on the left side of the extruder but doesn't block the tension screw for the Bondtech gears. I…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
I designed it in a way, so it's easier to remix or to model some symbols on. The g-code is simple and prints without supports. You can modify the look of the front with the sheed you are using.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I recommend downloading the Print Files (gcodes) Printer requirements: 0.6mm nozzle with at least 200x200x200mm build volume --- body.gcode , uphere_body.gcode: Two versions of Yuki's body, "body.gcode" fits any 120mm pc fan,…
Print approx. €10.77–€13.17 excl. taxPreliminary estimate for one variant
I recommend downloading the Print Files (gcodes) Printer requirements: 0.6mm nozzle with at least 200x200x200mm build volume --- body_snowflake.gcode , uphere_body_snowflake.gcode: Two versions of Yuki's body, "body_snowflake.gcode" fits…
Print approx. €10.77–€13.17 excl. taxPreliminary estimate for one variant
This is a set of decorations for your Master Cooler QUBE 500 computer case. You can have RGB LED lights bouncing with the music, or single color LED lights glowing in the lightning bolt. These items will give your PC a cool and…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Snowflake Atmos Cooler Badge.
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for PETGSource material: PET
This model uses the recess on either end of the cooler to attach wheels. This model is split into two pieces to allow printing on a MK4. The wheel attachment is held on with a ratchet strap that is threaded though the slots on either end…
Print approx. €58.98–€72.08 excl. taxPreliminary estimate for one variant
This is a wall mountable stand which can fit both a laptop and an external lap cooler.
Print approx. €7.30–€8.93 excl. taxPreliminary estimate for one variant
These Files are Version 2.0 of the HAF Case Top Cover Fan Duct. This is a Fan Duct designed to cover the top opening of the HAF 912 Case. This model has locator pins that use the watercooling holes. If you want a version that uses other…
Print approx. €14.66–€17.92 excl. taxPreliminary estimate for one variant
The model contains a 5mm spacer for 2 80mm Fans and the attachment for the 240mm radiotor. I used this model to cover up the fans https://www.printables.com/de/model/373460-hexagon-fan-cover-80mm-120mm-140mm/comments/1557508
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Wind Tunnel This is another custom front-panel design for the MasterFrame 600 for the CoolerMaster FreeForm Competition. The model is based on the wind-tunnel principle used in the HAVN 360 case. The goal is a straight, unobstructed…
Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant
Swappable Pump Caps for Corsair iCUE LINK TITAN AIO – Aesthetic Meets Function Description: This custom-designed 3D printable pump cap system is created specifically for the Corsair iCUE LINK TITAN AIO CPU cooler. The model features a…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
This is my first entry for the Cooler Master FreeForm Playground Contest, and several additional designs are already in development. The models are fully custom-designed for the MasterFrame 600, a highly modular case specifically intended…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant
Just a wrench for the hex plastic nuts inside the water tank.
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
This is my second entry for the Cooler Master FreeForm Playground Contest, and several additional designs are already in development. The models are fully custom-designed for the MasterFrame 600, a highly modular chassis built to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
a base for your laptop, designed to have 3 coolers of 80mm x 80mm.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
we can all agree, for many of us right now… it's hot as Balls.. and well, my balls are hot. WFH or just in for a gaming session, with your 5090 pumping out the heat of a 1000's suns. I needed something to keep the crown jewels from…
Intercooler for Crocs. Add 6mm fuel pipes to connectors. Print 2 turbos, and superglue them together. : https://www.printables.com/model/317275-crocs-turbo
The perfect lightweight cooling setup for your new Ender 3 V3 SE.
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Here is a working 1/10th scale model of the classic Igloo Little Playmate Cooler. Link to the real thing I used for inspiration for this project: https://www.igloocoolers.com/products/ecocool-little-playmate-cooler Model Info The cooler…
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
V8 engine cooling cans. To assemble the engine you need to use M4 36cm 4 pcs. M4 12mm 2pcs. M4 nuts 10 pcs. It is worth checking all dimensions yourself after printing!! It's best to finally glue everything together
1/10th scale model of a Coleman cooler for use as a prop or accessory. Because reasons! This is a remix of OMW2FYB's work whom remixed from Schlauncha and I believe that is a remix of someone else work. I simply prepared this for a single…
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
As part of a quarantine project, I decided to pick up a used Nintendo Wii online to mod, and thought it would be fun to try 3D printing the accessories for it. Unfortunately, there aren't a ton of aesthetic options for most of the…
Special cooler to hold a six pack of average diameter cans in the piston holes. will just barely fit a 310mm bed.
I lost the original rails so I copied the one I still had. I made this for the Cooler Master Silencio S600 but it should fit other Cooler Master cases as well. Let me know if it works for your case. The drive is mounted with 4 standard…
My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps…
This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…
This blank capswap model will allow you to create your very own capswaps to put onto your Titan All-In-One CPU liquid coolers. The second STL / STEP file contains the base of the cooler as well (This can also be used to mount your capswap…
This is a print-in-place hinge for Coleman coolers. The “PIN” version is designed to have the same opening stops that the original hinge and the “CONE” version stops at 90 degrees to reduce the stress on the screws holding the hinges on.…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
Available in 355ml/12oz & 500ml/16.9oz. Requires 4x 4mm Screws (or you could just glue it…) . Screw holes are 25mm deep, accommodating many screw lengths. Very minimal supports required on Handle (pivot diameter) and Base (screw holes).…
///////////////////////////////////////////////////////////////// Update: 2/10/2026 Uploaded files for the Thermalright 6.86" LCD Display Link to the product: https://link.amazon/B0j0CNDgn Link to the software setup for Bazzite:…
ICED AIR COOLER uses a 120mm pc fan and a frozen water bottle to create a chilled comfortable BREEZE for hours at a time. Its a really nice cool breeze perfect for those hot days where working inside at the computer is just not…
Hook part extended by 5mm on both mounts. Category: Computer
Was bored, made something for the next camping trip to the race track. Printable in PLA, PETG, ASA, ABS, everything is enforced by threaded M4 Rods. For Assembly you will need: 3x M4 threaded rods - cut to 5x ~ 36,0 cm (2 for the bottom,…
Need a way to chill your beverage? A single can cooler with a retro twist! This 3D printed travel cooler will make the best model you've ever made! How to Print The Body, Insulation, and Handle detail can be printed without support. The…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
Update 22.12.2024: ---- Update the models with the the bump to avoid the self rotation and add the STEP files for the original fan. ---- The airflow is much better than before, so try it out and please give feedback. I have use it for…
You can find pre-soldered hardware + fan kits here: https://exen.sh/products/diy-kit-direct-mount-cooler
Update: v2 Offset mod for Touch Sensor added. (Last photo) Offset Values added. Setup: You can find pdf document in the attachments for this. Printing: You have to use PETG or a heat resisdant filament to work properly. You can choose any…
I made this for my friends cooler which had busted hinges (very common) before I borrowed it. It works. The version I installed was printed in the orientation designed, with 5 external, 25% infill. Requires support because of the holes, I…
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler
ONLY FOR PEOPLE WHO OWN 3D PRINTER AND/OR ENTHUSIAST WILLING TO TRY NEW STUFF MAKE SURE ALL VRM COMPONENTS HAVE INDIVIDUAL HEATSINKS (ALTERNATIVELY STOCK HEATSINK CAN BE TEARED APART AND USED FOR THAT IF YOU KNOW WHAT YOU ARE DOING :-) )…
Ender 3 V2 Stealthburner V2 I've modified the ABS mount to be one piece instead of two. And Its assembly should be pretty straightforward. The hole gantry does not need to be dismounted. Or the Heatsink. Just put it on top and secure it…
This is an improved version of a hotend cooler design I made a while ago. Its airflow is substantially better than the previous version. As well, you can now peek at the nozzle from the front of the machine so that you can see how the…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
I was fanatical about this design. I wanted to make a lightweight cooling duct that improved the cooling and was easily tuneable. I would suggest printing this in ASA for heat resistance. I used the organic tree supports from the bed only…
I was unhappy with the temperatures my EBB36 was reporting when running longer prints in a well insulated chamber. So I whipped up this quick mount for a 3010 fan that also attaches the EBB36. You will need 2x M3x35 or longer screws to…
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
Printed at .12 layer height with 15% infill. Material doesn't matter. Painted the raised areas with white paint marker. Handle is made from a metal coat hanger wire. Print with normal supports
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
Laptop cooler that reduces laptop fan noise and decreases temperatures. To the print itself: Material: Any PLA (I used Extrudr PLA NX2) Temperature: 205 °C (Prusa Slicer preset for said filament) Layer height: 0.3 mm The print worked for…
5015 Part cooling fan I've upgraded to a rev 2 of the part cooler. This helps eliminate some unfinished overhangs inside of the duct. Update - Added Rev 3 Backplate for more room to stick wires or mosfet. I will update with thorough…
Summary of the T240R- Top 240 mm Radiator mount for the Coolermaster NR200 ITX case. This is a mounting assembly/system mod for the Coolermaster NR200 to mount a full size 240mm radiator with 2 120mm fans to the top of the NR200. This mod…
The Cooler Master Pi Case 40 (now V2) provides a long-lasting, premium enclosure for Raspberry Pi pro-users, featuring a sleek aluminum shell, and a high-grade TPU bumper for further protection. Once assembled, the system provides silent,…
Designed to be Printed on bambu Lab bed size 250mm x 250mm Split 3 piece engine block Cooler middle - 1 pcs Cooler block - 2 pcs Cylinder head 6 pcs Cooler handle - 2 pcs Ice cover - Dodge , ford or Blank - 3 pcs Cooler - No supports…
Update: Now with heatsert option using standard Voron heatserts. This design uses 3 x 40mm fans to keep the stepper drivers on Octopus boards running nice and cool. Confirmed fit on both Octopus 1.1 and Octopus Pro. Tested for clearance…
Remixed so it fits the Cooler Master Riser cable PCIe 4.0 x16
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
This is the full documentation for building a tractor with the PolyBriX construction kit. This project only provides the STLs with all the required parts and the detailed assembly instructions. The individual parts can be downloaded form…
Cooler used: https://a.co/d/gyw5dgC In my testing I went from 92c max to 72c max. Use the intel brackets (longer ones) to mount to the 3d Printed adapter. M4 nut and bolts for mounting.
Can someone tell me what the riges on knives are for? I cant figure it out. UPDATE: Im working on a blade rn that my brother thinks is even BETTER than COOLER.BLADE (2)! photo of my work so far…
I made this parts cooler to help address a printing issue, it helps but didn't rid me of the issue.
This is my ATMOS mod for comunity. Model should deliver RGB light effects too. There are two models for different hose position. You can add TEXT on tag at PrusaSlicer. Example from pictures is printed with 0.2mm layer height. !!!PLEASE…
Designed to be Printed on bambu Lab bed size 250mm x 250mm Cooler - No supports required, I used PETG with 15% infill , 3 walls Cylinder Head - I have 2 designs one with cavity and one completely closed Cavity - 35% infill No supports…
Led not attached to the cooler. It only rest on it or you can glue it.
This is a replacement drain plug cap for a Igloo BXM cooler. It may also fit other Igloo cooler and even other brands, but that has not been tested. Threads are tighter than original, but operate smoothly. The addition of a 26mm OD O-ring…
