424 models
Used a (slightly inaccurate but cooler-looking) Unitology font to inscribe the Marker from Dead Space. I've seen various paid models on other sites that use the inferior game rip version of the marker and are full of holes in the mesh.…
A very simple too for aligning your laser head (40mm x 40mm square diode laser modules) to your workpiece. It allows you to quickly establish the origin at the corners of your material without having to test fire your laser. Just butt the…
Low Profile Honeycomb Pins for Laser Engravers by RebelTaz I have seen these hold down pins for laser engraver honeycomb beds everywhere, but the problem with all of them is that they stick up too far to be useful with "fixed focus"…
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if…
This is a model designed to help keep the position of the honey comb panel for PHECDA Engraver in a fixed position. It is not perfectly centred on the day it was uploaded, but I will seek to change that by getting accurate dimensions from…
Openbuilds 2040 V-Slot The plates are 8 mm thick and are designed for 2040 v-rail. Y-Plates: One of the plates is designed for a Nema 17 stepper motor and the other accommodates a 16 mm f625zz flanged bearing. X-Plates: The back plate is…
Inspired by traditional movable type and my love for letterpress printing, I have created a set of movable type stencils. Unlike other alphabet stencils, this system takes the guesswork out of letter spacing and keeps everything in line.…
Customizable Engraved Rings This is an OpenSCAD customizer for creating an engraved ring. Specify the inner diameter, the width and the thickness of the ring. It can be sized large enough to make a bracelet. Add text inside, outside, or…
Free? IDK. That's what the designer chose to name it. It is super cool though. Engraving and derringers go together like peanut butter and jelly! Get the remaining files from the original Harlot and read the instructions!
Drag Chain for the Longer Ray5 laser engraver 10W (probably would fit for all the models) You'll need 26 chain links for the X axis and 33 for the Y-axis (Dont know if all units have the same cable lengths). The chain can be printed in…
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
Always make sure you are using high quality eye protection and ventilation while working with lasers. Eye protection is very important! https://github.com/Adamslab/SimpleEngraver This is a 3D printable frame for a simple 2-axis laser…
Laser Engraver Rotary Riser/Stabilizer 2 Options Available: (3D Printed or Laser Cut) 3D Printed Version: Printed in PLA+ I used a .6mm Nozzle, however you can use a .4mm as well With a .6mm Nozzle 2 Outer Walls. With a .4mm Nozzle 3…
Remixed to engrave the Ender logo @ .8mm depth Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .16 Infill: 15 Filament: 3D Fillies PLA+ Black Category: 3D Printer Accessories
This Marker is a hollowed and colored version of @Aeviternal_233277 Marker . I hollowed it with Meshmixer and painted it in Prusaslicer for a Prusa XL as I wanted to use it as a Lamp. The walls are a bit thin on certain spots and can…
Having done away with the polished rods and linear bearings to simplify assembly of my previous thing ( https://www.thingiverse.com/thing:5229492 ), I was proud of myself. But, clearly, with all the plastic-on-plastic sliding surfaces in…
NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…
This standoff i fits laser engraver honeycombs that are 6.5mm diameter for holes. This standoff has a 1.25 degree draft outwards towards the top to make it get slightly tighter as you push it into the honeycomb surface. Holds your…
Signage for the Desperado Club from the book series Dungeon Crawler Carl. Color layers in the slicer at .2mm 0 - 13 (2.6mm) - White (I'd try black or a darker color, too many shadows on light color) 14 - 19 (3.8mm) - Red 20 - 37 (7.4mm) -…
If you laser engrave business cards or anything else that is 86x54mm, you know lining them up time and time again is a PITA. I created this jig to make alignment fast and easy. Holds 8 cards. You can print two and they will fit in an…
This is a small cantilevered laser engraver design based on https://www.thingiverse.com/thing:4605853 I used most of the core design, but resized it for 2020 aluminum extrusions and thinned out most of the parts because they don't need…
Still a work in progress, things may change I'm building a laser engraver with a school grant, and here is my design! Features: coreXY 270mm * 270mm cutting area compatible with all 40mm * 40mm lasers (I'm using a 5w one) Runs on an…
Laser Engravers Little Helpers Designed for the Longer Ray5 (XL Version pictured). Compability with other engravers not confirmed. To be printed without brim.
I made this using Jamie_K's geodesic sphere for OpenSCAD because I always felt that the default sphere geometry in OpenSCAD wasn't suited for this. So here is a customizable gyro toy (as if there aren't enough of them already). The…
DIY laser. Simple. 2020 V-slot aluminum extrusions. Reliable. Low cost. Easy to build. Standard sized POM wheels (not the small ones that does not roll). Air assist for a fraction of the prize. Low parts count. Off the shelf components.…
Alternative to official longer3d stands for the ray5 20w laser engraver. Certainly compatible with other Ray5 models. With the base, you can fix the laser so that it's always in the same place, which is handy when you've made a grid. I've…
2nd Update 2025 March ATTENTION: New Insights tell, that Sculpfun FRAMES also might differ . ==> Before Printing, please initially check size of LASER frame My calculations base on the FRAME Size of my Sculpfun Laser. Measurement from the…
I recently bought a Atomstack A5 diode laser and wanted to add airassist to it without removing the shielding around. So I desinged a replacement sideplate with a 1mm nozzle that fits a 4mm inner diameter silicone tubing. Print…
My manual Z-axis ( https://www.thingiverse.com/thing:5145644 ) works quite nicely but is overkill for a light-weight laser module. It can be a pain to assemble if the printed fits are particularly tight and requires polished rod and…
Drag chain for the Creality Falcon Laser Engraver. Its not perfect, but it keeps things tidy and it works. Prep work: You will need to print one of each mount, (32) Drag Chain, (21) Drag Chain Reverse, and (53) Drag Chain Cap. You will…
Place up to 12 clothespins in the jig and hold them stable for engraving. Makes it easy to engrave names on clothespins for party nametags. Edit the SVG to use the jig. Import it in Lightburn and change the text or put images in the…
Just use a 60 degree 0.3mm tip engraving v-bit and a ballpoint pen nib.
M3 Hex Nuts 1x M3 T-Nuts x6 M3 Screw 8mm x8 M3 Screw 40mm x2 M5 Screw 20mm x1 M5 Bolt x1 M8 steel rod 220mm x2 2GT 20 Teeth 5mm Bore Aluminum Timing Pulley x1 2GT 20 Teeth 8mm Bore Aluminum Timing Pulley x2 100mm Length 6mm Width 2GT Belt…
Snap-together version of https://www.thingiverse.com/thing:5233648 . Slight internal structural differences to accommodate other mounting options but otherwise much the same. Fits directly on Fokoos and Eleksmaker A3 laser machines.…
The laser sits about 20 mm from the outer edge of the laser module. This tool can help to find the zero point. Print Settings Supports: No Resolution: 0.2 Infill: 20 Filament: PETG
This hold a 415mm x 400mm laser honeycomb surface in place for the Creality Falcon 2 laser engraver. You will need 4 of these and place them under the feet and they will hold the surface in place from moving around.
Introducing the "ABC 3D Typography Collection" - an educational set of 3D printable models showcasing each English alphabet letter. Designed for the 3D Design Typography Contests on https://www.printables.com/, these models are perfect…
Complex model, with mechanical parts beyond the printed ones. No programming skills needed, basic knowledge about Arduino desirable. As designed, the cutter is quite large (can be downsized, of course), and the frame rigidity using…
Great for your hockey fan. Hold your phone, tablet, picture, photo, business card or even hockey card with these engraved hockey pucks. There are two groove widths: 15mm wide or 10mm wide. The larger one holds my iPhone 15 with case…
Some time ago I built a small DVD-Laser engraver but it wasn't really usable. Now this new one became reality by chance. When I upgraded my 3D printer Prusa i3 MK2 to the newer MK2S version I had a few spare parts, namely linear rods and…
This is a easy to cut out bed for your diode laser from the box it comes in to allow clean cuts and allow for cutting fumes to be evacuated from the bottom of the machine.
Lifts your Creality Falcon 2 Laser Engraver up by 57mm or 160 mm to enable clearance for a Y roller and a 100mm diameter cup. No threading is required the foot will fit into the leg extension. Added 70mm and 100mm sizes.
Mecpow X3 Pro Honeycomb adapter Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in…
This is a basic laser engraver. You can customize it if the design doesn't fit your standards. I've added the SolidWorks files. Hope you guys like it :) How to assemble & testing : https://youtu.be/NyUJvcocJpA list of the parts: 4x…
A very simple rotary attachment for a laser engraver using standard reprap parts. This uses two NEMA 17 motor wired in parallel. It is cut from 1/4" MDF. The design is simple intentionally so it can be modified and changed to fit your…
I've been working on an upgrade for the original engraver. When Jogi on Thingiverse posted his Make of the original version ( https://www.thingiverse.com/make:523254 ) he improved on many shortcomings (much cleaner build, larger area,…
This is a simple laser bed grid/feet combo for aluminium profiles. Each grid is 20cm x 20cm so they can be added together to make larger grids. The feet attach to the aluminium frame using t nuts and M5 screws. The feet also allow for the…
There are 3 versions in both .stl and .step files. The 3 models have a 1mm top, a 2mm top and a 3mm top. Select the version that best suits your purpose regarding strength and clearance rerquired from laser head. The .3fd file is also…
An engraving pattern that would look perfect in the vest pocket of an old west gambler. Get the remaining files from the original Harlot and read the instructions!
Magnetic holddown for honeycomb bed on laser engraver Thin so laser head will not strike the hold down for use with3 mm stock Magnets are 12x3 mm see source in picture Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Just to keep the PSU of the engraver in place. You will need a pair of nuts for the 2020 rails I will probably improve it wirh an allocation for the rest of the cable and the USB cable
A friend of mine wanted to build his own base plate for the ACMER P2 laser engraver. I designed these positioners which allow a separation of base plate and laser engraver for better storage and flexible use. The positioners allow the…
This gadget is to attach a 3" vent pipe to a window screen. It is magnetically held to the screen to keep the vent hose in place during laser engraving, or any other vent need you may have. It is held in place with 8ea. 6mm x 3mm magnets…
Important note: Adding text to the holder requires PrusaSlicer version 2.3.2 (in beta, as of July 3, 2021, available to download at https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.2-beta ) and above . The older version…
Scroll down for English translation! Für meinen Laser fehlte mir noch eine Rotary-Einheit, um auch runde Objekte lasern zu können. Da die Teile verhältnismäßig teuer sind, entschloß ich mich, mir so ein Gerät selbst zu bauen. Da ich viele…
Easy to build 10W Laser Engraver using mostly left over printer parts.
This is riser for laser engraver honecomb from Two Trees. It rises the honecomb above (20 mm) metal sheet (and 25 mm above ground) so the smoke can exit better bellow the burned plywood and does not leave markings. There is also base…
I designed this centering turntable to be used with my Horizontal / Vertical Laser engraver in Vertical mode. https://www.thingiverse.com/thing:4934772 There is a PDF Assembly guide attached for putting this together. Here are a couple of…
I slightly increased the distance between the rollers on the Y-gantry, so the 2020 rail fits better. I also made two of the holes in the lower gantry plate bigger for eccentric nuts, like in the upper plate. Also added a mount for my…
Ok here is my version of @ThothLoki rotary axis for my eleksmaker a3 diode laser. Mine is designed for a nema 17 and replaces either the x or y axis on your laser. I use t2 laser to convert the lateral movement into rotational movement.…
adds a air assist to a 40 mm diode laser engraver. should give you slightly better cutting performance by clearing ash from the cut and increase the life span of your laser diode by blowing the smoke away from the lens. tested on my…
This tool is designed for TTS-55 Laser engraver whith 40x40 mm head. Is universal for many other laser engravers and works best with Honeycomb base where you can fix the tool into position. This reduces preparation time and makes your…
If you own a laser engraver/cutter you know how hard it can be to position, for instance, your Rotary Adapter perfectly. I know you can buy this stuff but why bother if you also own a 3D printer? So I designed this simple squaring tool…
Manual Z-axis for focusing Two Trees TTS-10 laser engraver, replacing original height adjustment mechanism. Laser mounting plate with multiple offsets, for different laser builds. Mounts to laser module with 4 M3x12 screws.…
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Laser is very dangerous! NEVER use it without safety protection!! Even a cheap 250mW Laser can harm your eyes badly!!! If you dont have any safetygoggles, use at…
For Bambu printers download profiles in makeworld, search for me by my user. Para impresoras Bambu descargar los perfiles en makeworld, buscame por mi usuario. Model I designed this hinge for the protective cover of the Elegoo Phecda…
Printed the original model. I am using air assist and the model requires modification for that because of a valve stem that sticks on the side, and because it changes the dimension of what is at the bottom of the diode. I made this remix.…
This riser was created specifically for the Two Trees TTS-25 but should work with any similar laser engraver. I have attached the original Freecad document so you can use the spreadsheet to change dimensions without needed to know any cad…
Laser engrave tall objects with this dedicated mount. After removing the Ender hotend, screw this mount onto the X carriage, and slide the laser into it. It is designed to print the way it is oriented. Print with a 5mm brim to stop it…
This simple sheet slides onto the left front foot of the engraver. Easy positioning of materials fitting their left lower corner onto the origo. No need for any modifications, just snap it onto the left front foot. Printed 0.2, PLA on…
I am starting to design my own laser cutter and engraver. I have some parts at home and waiting for the laser unit. I will use Neje 30W new design laser module. Other parts coming soon. Aluminium profiles 3030 15 mm linear guide Designed…
Inexpensive diode laser cutter engravers rarely come with a enclosure. This can be a safety hazard for your eyes. This is a simple trick that costs pennies and reduces the risk substantially. It also helps with laser focus and directing…
Print at 0.2 resolution and 20% infill. I have only printed this in PLA to date. TPU may be a better choice. Light sanding, using 600 grade or finer paper, just over the text may be desirable for an overall acceptable finish.
I use this 120mm exhaust fan adapter for my Comgrow laser engraver Category: Tools
A set of feet, to hold your Atomstack A5 Pro+ laser engraver to a sacrificial base board. The inner gap to slide the feet are 3mm wide, so they should fit other engravers or objects with a similar size. My laser engraver has a kind of…
Simple Mark the Bookmark extruded and engraved
Introducing the XTools M1 Laser Engraver Deluxe Accessory Kit – because upgrading your laser game should be as fun as a barrel of laser-engraved monkeys! 🚀 Unleash the Laser Beast! Feel the power in your hands with our specially designed…
Holder for hose on the drag chain
I was playing around with different gaskets for sealing my panels and had to print multiple sizes for testing. I'm not organized so they got jumbled. Maybe these will help or save your time. Note, haven't printed the finished product,…
Alternative to official longer3d stands for the ray5 20w laser engraver V2. Certainly compatible with other Ray5 models. With the base, you can fix the laser so it's always in the same place, which is handy when you've made a grid. I've…
Separate barrels for each dart. Can be loaded with triple elite or 6 half darts. Engraved and smooth versions available. Engravings match that of the Stagecoach Double Barrel Blaster . Barrels are slightly tigher packed than the Corvus…
3D printed ring dishes. Uploaded the Step file if you want to change the initial.
The honeycomb pins for laser engravers already published didn't fit in mine, which is thinner. So I made my own pins
This thing has a customizer which creates "engraved" shopping cart tokens. For the token, you can select from several pre-defined coins: loonie, one euro coin, two euro coin, British pound, Australian dollar, Canadian quarter, US quarter,…
I needed to vent a new laser engraver and wanted to set something up that could slide into my basement window and have a vent for casual use to open or close if the weather was being nasty. I added ¼" weather stripping around all edges.…
This is a simple holder for a mini 6mm laser diode module that fits into the tube of a K40/equivalent CO2 laser engraver/cutter. There are channels on the side for the laser module wires to exit the tube to connect to a battery. There is…
Update - 13th October 2020: Still have this running on my K40 over 3 years later and its working better than the original part. The pulley idler on my K40's X axis had worn away quite a bit and the belt was popping off every few jobs. I…
Remix of the blade from GeoPrints13 adding the Triforce engraving.
Abstract I am building a small and simple laser engraver for home use. Project is a compilation of my ideas and some parts that I found here on printable.com. Project is not finished yet but for now I am placing here parts that I already…
Thought this was so simple someone had made it already… looked, nope. This is the ONLY part you need to print to raise the CR Falcon: No hardware, no base, nothing but this one thing to print as many times as you want and stack them. They…
Befon Branded Atomstack Laser Engraver Risers by RebelTaz I found this fantastic design ( Ortur Master 2 LM2 Height adjustable feet by LoZa on Thingiverse: https://www.thingiverse.com/thing:4676121 ) for risers for a laser engraver. This…
Laser Engraver Hold Down by RebelTaz This is a simple hold down for a laser engraver to ensure that the engraver stays stationary in relation to the wasteboard. Very useful when using LAHobbyGuy's 400x400 grid :) These are designed for a…
I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then. Well, Here they are!!!! The STL files were made by importing the attached DXF files into Fusion 360 and extruding them. All…
Adapter for a spiral hose from a 50W fume extractor (e.g., available on Amazon) with a hose diameter of 60mm, suitable for the Creality Falcon A1 exhaust port. The adapter offers 90-degree rotational mounting—left, right, up, or down—with…
Phone and Keys holder in a 2mm chamfered design. Holds two phones in portrait orientation and 6 keys. Prints without supports. V2 added 3 screw covers that can be engraved with your custom text facing the build plate.
Do you need elevate 30mm? 50mm?… 80mm? print parts and combine sizes for gets the wished height. The final its the old positioner base for provide better grip in whole height. Thickness increased in all parts for better performance in…
This 3D printable Renault keychain features the new Renault logo engraved as a pass-through cut, creating a clean, minimalist, and modern look. The logo is fully cut out from the body of the keychain, allowing light to pass through and…
This is a replacement housing for the blower motor and squirrel cage from the blower unit that comes with most K40 Lasers. This housing fits properly in the slot behind the machine, takes up significantly less space, and allows access to…
