Counting matching models…
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Mount is compatible with Reolink E1, Reolink RLC-410W, and TP-Link Tapo C200/C210
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Works on Curved Surfaces Print In Place living hinge magnets will “conform” to curved surfaces of many different diameters. Required hardware 3 magnets - The model has holes for 3/8in x 1/8in magnets which you can get from the link below…
A fun little addition to your back to school stationery, An armour for the true hero, “the eraser of your mistakes."
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
The holder can hold a little over 48 Bamboo Flash Cards. The design is available in four variants with and without HoneyComb pattern and with and without pen holder. I printed everything in 0.3 mm layer height with support for all of the…
Simple magnetic holders for the slim style (Expo or other brands with a similar style) dry erase pens. The magnet is inserted into the print with a print pause at the appropriate layer. Required Non-Printable Parts: 1x – 12.7 x 3.2mm disc…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Clip with eraser holder for 7mm thick pencil, e.g. from IKEA. Can also be used as a cap / lead protector. Printed from PETG standing upwards (see 3mf project file). There might be a slight variation in the thickness of IKEA pencils, if…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Actioncam stand for any kind of modification possible with a simple M14x2 thread as connection
Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant
The cup hangs loosely on the red side bars of an IKEA MÅLA easel. A typical bottle of dry erase cleaner liquid with a diameter of 4 to 5 cm should fit. It prints upside down without supports. The bottom is open so the content is held by…
Camerastation for an ESP32 Cam with a solarpanel and button for battery charging. With the right programming, it could be controlled via web browser, your smartphone, etc. I recommend printing it split in half!
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
Lost the cap to a Pentel dry erase marker. This is almost a like for like replacement, only difference is the holes that prevent a child from choking are slightly smaller to prevent drying out. They still let air in, but I added some…
This is a mini tripod for cameras. WHY? I wanted an small tripod that would be able to carry a DSLR in portrait and landscape mode. Many 3D printed tripods where either too small or not stable or didn't support portrait orientation. So I…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
Holder for Expo Dry Erase Set. There are two versions, one for 4 markers and one for 6 markers. It can be attached to a wall using Command Strips or placed on a desk or table. There are also recesses in the back for gluing 6 mm diameter…
This is an insert / organizer for Food Chain Magnate and the more recent, larger dry erase milestone boards from BGG. It has no lid lift, supports premium sleeves on the cards (Gamegenic Prime sleeves shown in the images), supports…
The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
PROTESIS PARA PERROS AYUDANTE DE MOVILIDAD REDUCIDA CON TENSORES ELASTICOS
Modeled after the layout of the Eras Tour Stage. Customize text with secret songs and venue. I used a color change stop on my MK4 and 3 perimeters with a 10% infill printing in PLA. Can also change the center and bottom text to be joined…
yes this cover is thicker than normal, but you can lay it flat. No buttons or cameras are sticking out. i included step files, so you can modify it. I printed it with TPU Category: Mobile Phone
Additional hardware needed. (Full list of all hardware parts will be coming sortly)
Overview: This system utilizes standard, affordable ID cards or RFID cards and works seamlessly with any dry-erase marker. For optimal use, fine tip markers equipped with an eraser are recommended. System Features: 1. Card Storage :…
🌼 Everlasting Blooms, Forever Yours 🌼 Introducing Gerbera Forever: The 3D-Printed Bouquet That Never Fades In our fast-paced world, beauty often feels fleeting. But not anymore. This Gerbera Forever bouquet brings the vibrant charm of…
This will hold a standard whiteboard eraser, cleaning fluid, and several markers. It fits either thin or normal thickness markers, and was designed specifically for either of these two starter sets:…
Test para revisar primeras capas. Imprimir con altura de capa 0.2mm. Se podrá ver la calidad de la primera capa en una superficie de 120mm*120mm Se podrá observar la calidad en 5 Puntos repartidos en las esquinas y centro con una altura…
I could only find Chin Mounts online for the K3 SV, so I 3D scanned my helmet. Fit's well on my large and my girlfriends small helmet. The file is a bit lumpy as a result of using my phone to scan the helmet, could probably be smoothed…
Should print in all filament
This design is actually a bit of a spin-off from my tiny tripod ecosystem: https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio After I got my GoPro Hero8, I first added a GoPro specific part to…
Esta impresionante miniatura representa un monstruo original de horror orgánico: un ser humanoide alto y musculoso cuya piel ha sido reemplazada por gruesas enredaderas y tendones retorcidos que se enroscan alrededor de su cuerpo. La…
For the Bissell Pet Hair Eraser 2390 Cordless Hand Vacuum: https://www.bissell.com/pet-hair-eraser-lithium-ion-cordless-pet-hand-vacuum-2390.html Model inspired by Etsy listing:…
Simplified, "working", neuralizer from Men in Black. The idea is that you could replicate this project using anything from 1 hour (+ printing time of around 6 hours for a 2mm layer 0.4mm nozzle print) to a couple of days, depending on how…
Introducing the TPU Eraser, a residue remover crafted with unwavering precision to vanquish the elusive remnants left behind by the TPUs on the sacred grounds of the build plate. Anticipating meager results, I embarked upon this endeavor,…
The example is printed without supports (oriented on its side) using PETG with a 0.2mm layer height on an mk3s.
If you have a whiteboard these gadgets will be very useful. Holds 5 board markers and a board eraser. Can also be used separately. You can glue magnets at the back and install on a metal surface or use 3M double sided tape. Print…
UPDATE Sept 2023: Improved the size of the SX-70 version (others to follow soon) to allow for the newer Polaroid batteries. These are now .3mf models exported from fusion360, and may not be in the proper orientation. ---------- This is…
Made an extra 120 film spool for an old vintage camera, thought it might be useful to someone.
A 3D-printable film cartridge for Agfa Rapid film cameras The Rapid film system was Agfa's answer to Kodak's 126 cartridge back in the 1960s, a quick-loading 35mm film format. It was based on an earlier Agfa cartridge, with the addition…
Love the original design, but it was for M2.5 screws which I don't have :) So I remixed it for M3 screw holes.
If you place your Reolink E1 / E1 Pro / E1 Zoom Surveillance Cameras in a high position, you will not be able to see much of the room, especially if it is a small one. With this tilted base you will be able to make the camera frame more…
This model consists of the cameras for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by…
I designed the cap for when the camera is stored without a lens. The model is a multicolor design. It also can be printed without the letter by leaving the place empty (you just have to delete the three parts of the letter in the 3mf…
The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's…
The tray that comes with dry erase boards cause markers to drop everywhere as soon as you want to have more than 2 color options. Doesn't require any supports, could be printed shorter and still function just as well, so that's more…
This a desing from 2016 of small scissors printed in ABS. Just print and clip the bolt. *The main body must be printed twice. Category: Household Supplies
This is a set of 1mm, 2mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, and 10mm M42x0.75 adapters. The 4-10mm adapters are Male to Female style adapters, while the very tiny 1 and 2mm adapters are Female to Female adapters (they just sit between any…
A FUN ERASER HOLDER THAT ALLOWS YOU TO HAVE ALWAYS A SHARP ERASER!! Share your prints!! The shape of the holder allows to always have a sharp end of the eraser. Simple Assembly STEPS: I used this ERASER : https://amzn.to/3Xae5gQ (This is…
A useful marker and eraser holder for a whiteboard. Holds 7 markers and 1 eraser. Printing tips: Use PLA with 0.2mm or thicker. Prints well with thick layers. No supports needed Attach with double sided tape.
I loved the design language used by lendres' "Expo Dry Erase Marker Set", but I wanted to store the markers horizontally so they would preserve their ink. After storing dry erase markers vertically and upside down, the ink either drains…
This is a simple body cap for a wide-angle pinhole on a Sony mirrorless camera. It's also my first ever finished design. I printed this on an Ender-2 Pro with Creality filament, using PrusaSlicer defaults. I used 0.16mm layer height, with…
This model is very similar to the original one, except I added two “ears” and two pegs to be able to mount it to the frame of my whiteboard (see pictures). Kudos to @lendres for the original model anf for providing the Fusion360 files so…
Uploaded files do not include the logo shown in the photos--feel free to add your own! Print with the back surface down and insert a pause to insert magnets. I used these magnets.
A simple dry erase marker holder that holds 5 markers and an eraser. The intent is to be attached to the wall. I use PLA and lightning infill.
Most people use the Raspberry Pi + Pi Camera setup for their Octoprint… but I had a spare Odroid XU4 laying around. Trying to find a camera similar to the Pi Cam, I stumbled onto ELP cameras. Similar footprint to Pi Cam, and pretty cheap.…
A simple holder designed to hold 14 Expo dry erase markers and one Expo dry eraser. I initially added 6 small holes in the back to hold six 8x3mm magnets, but I have also included a version with a flat back. I have also included a…
Heres a simple Magnetic clip to attach your expo marker to a whiteboard or anything magnetic. I didnt have 10x3mm magnets on hand so I just make it with 5 6x2mm magnets. Both files are below. If you would like a different size, feel free…
Some modular, wet-erase tokens for lancer RPG in 1, 2, 3 inch options. White PLA+ can work as a wet-erase surface - you may have best results with ironing, or ‘concentric’ top surface. Haven't tried ‘Herbert’ surface. The 1 inch token is…
3D printable eyepiece for Nikon cameras replacing the DK-17. I also included a 3D file of just the thread, which you can use as a base for your own custom eyepiece or cover design. Printing recommendations The thread on this part is tiny.…
Simple Adapter that makes it possible to use 35mm in 120mm Cameras. I was tired of people selling them way to expensive. The Plug is for Kiev 88 Magazines, they have a hole to check the alignment of the numbers from the back of 120mm…
Motivation: I saw many bulky clips for whiteboard markers and chose to design something more visually appealing. Features: Vertical and horizontal storage is possible Neodymium magnets Ø10x3 mm or smaller magnets or M4 screws can be used…
Los módulos se sujetan de una guía, que debe fijarse a una superficie vertical. Pueden quitarse a mano simplemente subiéndolos, y pueden reordenarse a voluntad. Muy prácticos para tener relojes y anillos a mano y no sufrir intentando…
Simple mini tripod for common action camera mounting system. Designed and tested for dji action 2. For assembly you need 3x M3x16mm screws and 3 nuts (i recommend using nuts with nylon lock for better feel and constant tension).
Protects your eraser from getting all covered with gunk while it's in your pencil case. Swivel it closed when you need to put it away and swing it open when you need to erase. This version doesn't have any detents to lock in any of the…
🟦🟥🟦🟥🟦🟥🟦🟥🟦 ⚽ Visca Barça! 🏟 🟨🟥🟨🟥🟨🟥🟨🟥🟨 Nike is the current partner of FC Barcelona for kits and apparel, creating some of the most iconic jerseys for decades now! Here are some of the most memorable ones since 2004, when a golden age of FC…
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Usage Print two of each part, one set for input and one set for takeup. The top and bottom parts nest, enabling two sets (an entire kit) to fit into a standard Kodak-style film canister. To load film, cut off the leader and tape to the…
Porta lápices, lapiceras, lápices mecánicos, etc. para escritorio. Diseño propio, con detalles hexagonales para ahorrar material. Para 7 lápices. No necesita soporte. El ejemplo de la foto está impreso con nozzle 0.8mm y filamento cristal.
Remix of Anachronism great HotShoe Cover. Added new OM Systems and Lumix logos to both for my cameras that needed hot shoes. These were printed in resin on an SLS printer. Fine details will required .25mm nozzle or SLS to get the results…
Hey fellow Swifties!! These are Crocs Charms for every Taylor Swift Album Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2 Infill: 75 Filament: Hatchbox ABS Category: Accessories
As some of the caps for the Legami erasable pens can no longer be found, I printed my own caps.
I got tired of my markers drying out from being stored vertically so made this horizontal snap in holder. It has a satisfying click and firm hold. The opening is slightly tapered to match the markers and there is an arrow on top point to…
The Pentax M series bodies are a great affordable entry into the analog SLR market. With access to great affordable K mount lenses and packed with more features than the now pricier K-1000. The only problem for me is their small size.…
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small…
One of the most popular/visited reviews on our site is the JJC EC-6 Eyepiece Eg Extender . If you're not familiar with the eyepiece extender, it extends the eyecup 5/8" (15mm) from the camera body. This is useful for eyeglass wearers and…
impreso en una Anycubic Kobra 2 Neo boquilla de 0.2 si tienen mejoras se los agradezco
Wanted to use a cheap indoor home automation PTZ camera to ‘spy’ on our new puppy. Most of the surfaces nearby were too close and too high, so quickly designed and printed this angle mount to all the camera to be mounted at an angle so we…
I didn't like any of the existing expo marker holders and my dry erase board in my office isn't magnetic so I needed something that could clip onto the tray. Features : ✓ Prints flat with no support ✓ Uses minimal material ✓ Markers can…
I really liked @ dbfrompw_852503's version as it is perfect for the small kits you get with dry erase boards. But we have a small board so I wanted to mount my holder to the wall. I removed the magnet spots and added two tabs for using…
I created this to solve things that frustrated me with existing holder designs. The box type take up too much whiteboard space, the trays are frustrating to use and have scratched folks more than once, not to mention bumping them creates…
A GoPro like mount for the Happymodel Mobula8. It can be used to mount a light camera like the Runcam Thumb or Thumb Pro to the Mobula8 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Supports: Yes Resolution: 0.20 mm…
A holder for Expo Dry Erase Markers. The holes for the chisel tip markers are large enough that you can put the markers in upside down, allowing the ink to saturate the tip. Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA…
Here is the 3D scan of Douvilleiceras gr. mammillatum , an ammonite from the Cretaceous (more precisely from the Albian). If you want to know more about this species:…
¡Las seductoras guardianas del infierno japonés – Oni Kunoichi Élite Pack! Diseño 100% original: tres guerreras oni femeninas con piel roja demoníaca, cuernos curvados negros grandes, cabello largo negro, ojos amarillos brillantes y…
This is a junction box to mount a Reolink camera to the wall with enough space to handle the wiring pigtail and still feed the power wire through the back into the wall. Notes: The .3mf files are included if you simply want to print the…
Please comment, rate, and post a make! A mount for the Unifi G Pro series cameras to allow them to be setup on a tabletop. The mount body is angled at 30° to allow the camera to be pointed horizontally. The screw holes are sized for the…
This is a relatively low profile 49mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as you might use on a Ricoh GRIII, which can also use the same batteries……
Remix of https://www.thingiverse.com/thing:67330. I trimmed the edge with a face model. It fits well on my a6000.
This thing is a wall mount for a Bissell Pet Stain Eraser (model 2054). Strangely, Bissell doesn't seem to have one available. Note: This version has small changes from the last one I printed. I added screwdriver access holes and fixed…
This is a remix of my Mass MTG Tokens design but instead of foil labels, these use a dry erase label. You will need some clear dry erase sticker sheets to create the label. I have included 4 different label templates you can use. Print…
Scientifically accurate model of a stegoceras. The model features detailed scale/skin texturing along the model. I created three variants of the model, one standing and two posed. I recommend printing it at a finer layer height or with a…
This Cherry MX-compatible 2U Backspace keycap is disappointed in your typing mistakes! It's supposed to look like an old school (pink rubber) eraser but it won't look like that right off the printer... To solve that problem you have to…
Camera Mount for Tinywhoop Racing 15 - 55 degree tilt McStinkyHDZ is for the HDzero Nano Lite, there are also spacer files to raise the mounting point above the vtx board. TheMcStinky is for cameras with a 10mm lens and 12mm body, like…
This is an eyecup compatible with the following Canon cameras, fits cameras that fit the Canon ED eyecup: Canon EOS Film Cameras : EOS-3 EOS-1V EOS-1N EOS-1 EOS-30 / 7S / 7 NE and so on Canon EOS Digital Cameras : EOS-1D series (including…
A simple model to hold an Expo dry erase marker set including the markers, eraser, and cleaner -- or anything else that fits! Two stl's are provided: _V2 PUSH PIN - This version mounts via two standard push pins, which is what I've been…
This is a relatively low profile 40.5mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as the default Olympus/OM System filter adapter CLA-T01. I suggest printing the…
Simple toy version of 'Eraser Cat' from the game 'The Battle Cats'
