Counting matching models…
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving. Print instructions Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance. Link to source OnShape…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
please check if it works for your pc-case before you print
Print approx. €9.00–€11.00 excl. taxPreliminary estimate for PETGSource material: PET
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
The Thunderbird 1 is olso made bij gadgetmind Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA T Ford TT truck 1919
A common type of train-ticket-machine found in austria. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Supports: No Resolution: 0.05mm Infill: 15% Category: Buildings & Structures
Made a hatchetman lighter case with hatchetmen scattered all over of it. I recommend sizing it up 1% to 2%. Enjoy!
Oriental arquebusier. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Includes variants with 20mm square and 1in round base other minis are…
If you are having a hard time snapping the hanger onto the wire rack try adjusting the x-y hole compensation by -0.2mm.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
The windmill 'De Keetmolen' is a nice windmill, close to the place where I live. For example see https://en.wikipedia.org/wiki/De_Keetmolen,_Ede My friend Hans is an apprentice miller there and we decided to model the thing. At first I…
This is a remix of the "Rubbermaid Closet Wire Shelf Clip" by Prateek R. This one is for my Closet Maid wire shelves which have a clip that is a little bit longer between the shelf and the screw hole. I made it to use some drywall hangers…
Hello fellow makers! I have added a case to the ”panel d” of the Flashforge Adventurer 5m Quietmode! Back panel that holds an LM2596 Buck Converter (with 56.5mm x 35mm pcb and integrated display). That way you can use cheaper 12v fans and…
I wanted to label the freshly organized wire closetmaid shelves to ensure they stay that way and the closest solution I could find was slightly too large for my shelves so I trimmed it down to size! Model is now 26mm tall and ~72mm…
Made another hatchetman lighter case with a single hatchetman on it. I recommend sizing it up 1% to 2%. Enjoy!
Heres a throw back i found on my PC while going through old files, if you know, you know. Needs a 3mm dowel to complete. I never did make this so there is no guarantees that the base is sturdy enough or if it'll fall right on over.…
An end cap for the Closetmaid rod ( https://www.amazon.com/ClosetMaid-2051-SuperSlide-Adjustable-Hanging/dp/B00KZZ5JZQ ).
The ClosetMaid shelving that was installed in our house uses a third wire that the clothes hangers can slide on. That bottom wire relies on the end caps to support the weight and stop clothes from sliding off the end. We reconfigured our…
Magnetmotor Print instructions Magnetmotor Dies Thema beschäftigt mich schon lange und es gibt viele Anregungen z.B. bei YouTube, viele sagen das geht nicht (Energie-Erhaltungssatz) vielleicht habe sie recht aber ich halte es nicht für…
Needed a place to hang dog leashes, backpacks, laptop bags and the like. Zwoop's original design only fit on the front bar of my wire shelves so I decided a re-mix was in order. Will fit other brands of wire shelving, see notes below.…
Just a litte stand for the original magnetmount from Displate.
THIS IS AN OLD MODEL AND MAY NOT BE PERFECT. DESIGNED 100% BY ME. This is an independently designed aftermarket part and is not affiliated with or endorsed by Electro & Co. ETM RTR Rear Fender – Clean Tail Tidy Mod This is a low-profile…
Some users requested that I shared these STL files where I had set the parametric values of @Yanev's fantastic model to fit the Gunson's Pocketmeter 4141, with additional dividing partition added for cables.
3d model of a original wooden CETME C stock. Print butt pad in tpu, adjust walls and infill for desired squishyness, fuzzy skin works nicely on the butt pad.
Oem wooden style CETME C handguard modeled to be printed. It's about 283mm tall so there are options to print it in halves and pin it or dovetail together. Must reuse the metal fittings from a wooden handguard, see readme file.
This is my best approximation of the famous Metmo Cube seen online. The original is a precision machined piece of steel with such tight tolerances that its buttons disappear when fully depressed. And the air pressure from pushing one in…
This is secure and strong mount for Closetmaid ShelfTrack and Rubbermaid FastTrack vertical rails, which attaches into three levels like the Rubbermaid FastTrack shelves. To install, angle the top in first, then bring the mount's inner…
Source: https://www.models-resource.com/mobile/digimonlinkz/model/21381/
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
I am not sure if this is for the Rubbermaid or Closetmaid versions, but it looks just like this one: https://www.lowes.com/pd/Rubbermaid-FreeSlide-Corner-x-12-in-White-Universal-Wire-Shelf/50336061 Check the measurements of your shelves…
Great design by B. Wainfan. https://wainfan.co/ https://en.wikipedia.org/wiki/Wainfan_Facetmobile http://www.wainfan.com/fmfaq.htm Category: R/C Vehicles
Replica of a bayonet for the CETME C spanish assault rifle. Need a spring for the retention mechanism. Category: Props
Purpose: This hook is designed to allow items to be stored/hung in-front of Closetmaid shelving. Overview: This object is a remixed version of the Shelf hook for boxes by siderits. The major changes from the original are as follows: Hook…
Small hook for hanging stuff underneath Closetmaid wire shelves. Designed from scratch with my own measurements, although I did take inspiration from the design Closetmaid Wire Shelf Hat Holder . Thank you, @perryusaf I printed it with 2…
Replacement Door Top Stop for Prusa Humidity / Temp display and Modeled In Solid Trim
mag_holder_ak is a slot loading mag holder for ak mags. It holds ak47 and ak74 steel and bakelite mags. Vz58, hk g3, and cetme mags also fit. Check out the main page for Open Armory for more information on the system. Also check out the…
Someone thought they could hang on a rod in our ClosetMaid organizer and snapped the locator pin. Measured up the good one and created this model for replacing the broken one. Worked well, and only needed minimal support. The locator pin…
PLAY IT SAFE WITH A PREMIUM FAN COVER THAT KEEPS YOUR CHILDREN’S FINGERS FROM BECOMING PART OF THE EXTRUDER FAN’S DIET. WHO NEEDS FILAMENT FLYING OFF LIKE A ROCKET INTO YOUR FAN? I KNOW YOU DON’T, SO FOR THE LOW, LOW PRICE OF FREE NINETY…
Vented Mlok handguards for CETME C with various engravings, or plain. Requires reuse of the metal fittings from an oem wooden handguard. Modified from oem dimensions to fit on printers with 280mm Z. Should not need supports if your…
A print to hold a label on an Elfa or similar thickness shelf to help with organization. For shelves ~0.6 in or ~15 mm thick. The model prints in two pieces (the clip and the label holder). Can either snap together and leave as is or add…
Based on the original "Wire Shelf Hook", I've modified this to fit the heavy-duty shelf & rod system by Closetmaid. Printed with PLA, 0.4mm, 100% infill, no supports if printed on its side. Fill the bed with clones! These are so useful!…
Hatchetman Ring, printed in black resin and filled with red acrylic paint.
Another fun and simple design from the Build it Basement! This time, I needed a simple and strong side bracket for my son's ClosetMaid 20" shelving. I was going to buy some at the store until I saw they were overpriced and UGLY. These are…
This is a simple, beefy and deep J-hook for use with ClosetMaid shelves. It is easy to print and install to get more out of your shelves. Print without supports. Default print settings should be good enough, but you can increase infill…
Added multi-color printed on labels to fit my closet.
M4 screws with nuts are necassary. Magnets: 20mmx10mmx2mm(rectangular shaped). No glue necessary. The magnets are not directly touching the metal so you need strong magnets for this. Plese note this is not my idear i saw other models of…
This is a modified version of the Closetmaid Super Slider ( https://www.amazon.com/ClosetMaid-5655-SuperSlide-Universal-Support/dp/B000KL4CGM ) that I remixed to attach to 1 1/2 inch wire shelving. See the original for instructions on how…
WallArt der MHP-Arena (Neckarstadion) mit der umliegenden Landkarte. Für VfB Fans und Sammler, perfekt zum verschenken an einen VfB-Fans. Das Modell ist ein hingucker und lässt sich an die Wand hängen oder in eine Vitrine stellen. Viel…
Parts are printed with ASA and need partially supports. Assembly instruction: Connect the plate to the angle grinder using cylinder screws M8x15 (2x) and washers for M8 (2x). Add hexagon nuts M4 (2x) to the plate Assemble torque support…
I shall harness all the cords dwanglin' from my cheap closetMaid shelves. If you too have cord dwanglin chaos... don't
Logo from Jetman If you are interested in more tokusatsu themed 3d print files like Henshin belts, check out my etsy, patreon and website! Feel free to message me with model suggestions here or over on my website. Thanks, enjoy and happy…
Für die Gourmetmaxx Heißluft-Fritteuse Digital 2,5l gibt es eine Abdeckung über dem Handgriff. Da die originale Abdeckung abgebrochen ist, anbei eine selbst modellierte Abdeckung zum ersetzen. Ich habe PLA und PETG ausprobiert. Bisher…
Loved the investigation and simple design of this banding fix but I didn't want to use double sided tape so I remixed the model with a spot for a 15mm x 3mm circular magnet.
🔩⚡ #081 Magnemite – Print Magnemite in Parts! A quirky Electric/Steel-type Pokémon that floats using powerful magnetism. Simple, sturdy, and full of retro charm! 🔩⚡ Features: ✨ Multi-Part Model: Designed for clean, high-quality,…
Replacement latches for Petmate Kennel Cab pet carrier. Both the small and large latches are included. Print Settings Printer: FlashForge Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: Print standing straight up.…
This is a model of a connector bracket for joining two sections of ClosetMaid wire shelving at the front, thus ensuring that they are aligned and can distribute the load. I had some wire shelving pieces lying around and wanted to make…
This is a cover for C308/HK91/G3/PTR91/Cetme magazines to protect the feed lips. You can print them in different colors to indicate ammo types. I started with the shape from https://www.thingiverse.com/thing:1320532 and cut it down to…
build it up right with supports
Wesco Tretmülleimer 116 (13 Liter) / Mülleimer, Scharnier, Hochklappmechanismus, Deckelhalter Bei dem Treteimer war die Plastiknase für das Fusspedal zum Aufklappen des Deckels abgebrochen. Dadurch ging der Mülleimer nicht mehr durch das…
Description Cold shoe bracket for the Edutige ETM-001 microphone, specifically designed for the GoPro Media Mod, however it should work with any hot/cold shoe. The ETM-001 is excellent at picking up subtle environment sounds in nature,…
Printed in PLA at .1mm, this is a replacement part. Dog chewed up the real one. Modeled after the real part with some liberties taken for longevity. Longer pitch on the outcropping so the piece won't easily break. Slightly thicker than…
This bracket was designed to allow an Ikea OBSERVATÖR wire basket to be attached to a ClosetMaid Close Mesh Wire Shelf. These baskets can be had for around $3 USD, which is a bit cheaper than the ClosetMaid version of these baskets. Feel…
i made the hook a bit longer, deeper. rounded it a bit and took of the lower hook. Print instructions i printed it as fast as possible and its working perfectly
Print your own replacement CETME C buffer spring/bushing. Must be printed in TPU, or you are just making your buffer, non-buffered. Adjust walls and infill for desired buffer stiffness. I recommend close to solid.
A exposition base for the model CETME C BAYONET https://www.thingiverse.com/thing:3633560 Replicates accurately the front part of a CETME C assault rifle, very similar to the HK G3. Allow to hold the bayonet in place as the real one. Also…
Basic Key Hood designed for Closetmaid wire shelves. Print as oriented in file for best strength.
Petmate pet water fix, the original lid / cap completely broke when this thing was less than a year old!
This part of machine is fragile and will eventually break after years of usage. So you can simply print it again. I have tried to glue the original part with no success. Printing it is a better solution. Hint: MUST BE PRINTED IN 100%…
Simple adapter that allows you to use the closet rods from the ShelfTrack kit on a regular wire shelf. It fits snug and has held up in my closet for 10 months now without issues. Printed in PLA, 0.2mm layer height.
Support de casque à accrocher au mur pour ne plus abîmer votre casque Print Settings Printer: Craftbot Plus Rafts: No Supports: No Infill: 70 How I Designed This designed with freecad Category: Audio
The extension cord for our vacuum charging dock was always in the way, so I wanted to hold it tucked up against the wall. I tried Chicodemilo's Cord Snuggler for ClosetMaid ShelfTrack but it was too large for a single lamp cord. So I…
The latch cover for my dogs kennel broke. One hour later (I'm new to Fusion 360) and I have a replacement! This is why I got into 3D printing! Images show the original (broken) one, a few revisions (2mm too long, latch catches did not…
Needed to keep things from falling off the side of a suspended shelf and found a use for that 4” of leftover shelving. print on end for best results
What? Hang cables from the underside of wire shelves. These cable hangers use the flexibility of plastic to secure the cables in a way where they're easy and fast to insert and to grab. Compatibility The cable hangers are designed for…
The corpse of a woodsman or a raider? You decide. Either way, he's ready to smash up some adventurers in some dark and dank dungeon halls. This model is 28mm scale and requires supports. Raft recommended. If you like my work and want to…
WIHA screwdriver PocketMax holder for IKEA BESTA PAX Holder for IKEA BESTA and PAX to store a WIHA screwdriver PocketMax. IKEA PAX partlist: 2x screw (100325) IKEA BESTA partlist: 2x screw (113287) Model printed with: Prusament PETG prusa…
I needed a place to hang my headphone in the garage that I use when I do yard work. I took the hook from the justinline model and added a simple headphone holder to the end of it. I used pla+ and 20% infill.
Made by using Touch Terrain + some tweaking in Prusa Slicer to exaggerate the topo lines so to see the terrain more clearly. Best results on 0.05 layer height.
1x3x3 Gridfinity bin for the MetMo pocket driver. The bin comes with magnet holes.
The plastic component in the kettle lid hinge is fragile and can snap. This is a replacement part that works for my kettle but may work on other similar models from Gourmetmaxx.
I threw this together to hold two passive switches on my desk. NETmate is a common brand these appear under, but they may appear under different brands. There are passive switches in this form factor for USB, DisplayPort, HDMI, DVI,…
Working on a full Eeveelution PC set up. Had the idea of making some 3D printed fan grills. :)
This is mostly a cosmetic remix of darkspoon's latch cover. (I think the retention clips might be a little stronger. See below.) The corners and edges have had fillets and rounds added to give a smoother appearance and feel. The internals…
Nicht getestet!
This is a single slot hook mounted tiedown point for Closetmaid ShelfTrack and Rubbermaid FastTrack vertical rails. It works by sliding the longer end up into the rail, pushing the part into the rail's outer face, and then pushing down…
holder for budget hema stapler
Beschreibung Markierlehre ETmin für Pressverbindungen DN 12 - 35 Diese Markierlehre ist zum Anzeichnen der mindest Einstecktiefe (ETmin) bei Kupfer, Edelstahl und C-Stahl Pressverbindungen. geeignet für Pressverbindungen mit ETmin siehe…
I was having trouble installing a wire shelf in a closet, as the corner isn't square. As a result, one of the wall clips couldn't reach the drywall. I made this spacer so that I could get a solid connection with no wiggles in the shelf.…
Voici un porte clef reprenant le logo de Letmeknow! Category: Electronics
This was designed as a housing for the packet monitor 32 from DSTIKE. https://github.com/spacehuhn/PacketMonitor32 I got the board on Tindie if you stumbled across this, it is a fun little toy. Other parts: Battery[…
Pipetman L Ejector Button Replacement If you are using the Pipetman L in your lab and the ejector button broke off, this is a 3D printable replacement part Ejector Button in full or half configuration using dowel pins for support.…
Introducing the "PocketMist!" - a compact and easily 3D printable fog machine. Key Features: Simple Construction: Requires only a few common components: 30mm fan 1 small haf to ¾ inche 2mm screw ~1 inch of Nichrome wire ~2-3 inches of…
Osłona wskaźnika temperatury
This end cap fits the larger gauge wire on the Closetmaid wire shelf, the internal diameter is 8mm so you can shrink it down to fit the smaller wire in your slicer if you know the diameter of that. Print in TPU and upside down for best…
a wall box for Aliexpress moisture meter to be glued https://www.aliexpress.com/item/1005005532078659.html
Based on the “SpaceX landing pad," my uncle suggested a coaster for his business. Print Settings Because my white is kind of transparent, I did .25 layer height, with adaptive layer height on the top. This gives more layers to the white,…
This design is to prevent a Magsafe compatible iPhone or case from falling out of a shirt pocket when the wearer leans over or bends down to pick up something. I love the convenience of putting my phone in my shirt pocket, but there have…
