1,730 models
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for PETGSource material: PET
Elegoo Saturn 3 Ultra Exhaust System for the units housing port. Design remix from: https://www.printables.com/model/283993-elegoo-saturn-2-and-saturn-3-vent-system Other Collections by @Kssz2 : https://www.printables.com/@kssz2_292468…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
K40 exhaust adapter for K40 laser with the 90mm fan to connect the original blue hose. Printed angled on the print bed to reduce supports. If there is a need for other hose diameter, let me know. - - - - Winkelanschluss für den K40 Laser…
Print approx. €5.78–€7.06 excl. taxPreliminary estimate for one variant
This is a simple port adapter that you can affix to whatever you are using in your window and attach the hose to that was provided by xTool.
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Although I was okay with how the original axhaust looked, it broke when I rolled the car (flipped it at it's maiden drive outside). So I designed this alternative exhaust. It has a classic and robust look and it fits withing the engine…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…
Print approx. €6.10–€7.46 excl. taxPreliminary estimate for one variant
This is an adapter to vent the Core One out the window using standard 4" dryer vent hose. Some parts require supports, and are a little challenging, but the 3mf I posted is a project file showing the final settings I used to print. I used…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
The original steel sheet cover of the exhaust fan needs to be disassembled in order to swap the filter. This means to have access from the back but if your XL is butted against the wall, this process can be quite cumbersome. This design…
Print approx. €6.82–€8.33 excl. taxPreliminary estimate for PETGSource material: PET
I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
RC Car exhaust 1:10
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
A compact fan duct for the Prusa MINI(+)'s coldend heatsink exhaust. It directs the air upwards, away from the print and area to the right of the printer (which makes staring at the print from the side more pleasant). The part does not…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Dies ist ein Abluftgitter für Geräte in der Küche (Kühlschrank, Dampfabzug) für ein Loch der Grösse 45 cm x 6.5 cm. Es müssen zwei Teile gedruckt werden und zusammengeleimt (starker Zweikomponentenkleber oder Heissleim). Fusion360 Datei…
Print approx. €8.29–€10.13 excl. taxPreliminary estimate for one variant
DANBY Air conditioner AC 7 Inch adapter/reducer to 5.9Inch (15cm) originally drawn for model DPA120B8WDB-6. Short and long Versions (I prefer the short one). Reducer to 5.9Inch (15cm) drawn because 7 inch ducts seem harder to find on…
Printer Enclosure 65mm Exhaust Plate Summary This thing/printable is another addon that fits a 50mm fan. The idea behind this particular part is that's an exhaust port. 65mm tubing is attached via cable ties. Useful Links Assorted Nuts…
Print approx. €8.72–€10.66 excl. taxPreliminary estimate for PETGSource material: PET
Printer Enclosure 65mm Right Angle Modular Exhaust Summary This printable/thing is one iteration of the 65mm tubing system for the Printer Enclosure ventilation system. It utilises the same modular lock in plates. However this time it…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for the exhaust hose of our aircon. The hose has an ID = 150 mm (approx. six inches). You can use two of them to connect two pieces of tubing. Update: added a slightly taller variant with a grille. See also our hose connector:…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for PETGSource material: PET
In my case i have not much room behind the printer and most of the air exhaust were to big - so i designed one by myself. Comes greate with the 80mm-Fan on the inside from the official moddingoptions of the PrusaBox. You can screw them…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
RC Car exhaust 1:10
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Printer Enclosure 65mm T Shaped Modular Exhaust Summary This printable/thing is one iteration of the 65mm tubing system for the Printer Enclosure ventilation system. It utilises the same modular lock in plates. However this time it…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
The Rotrics DexArm / Hexbot robot arm combines with an optional safety enclosure box for laser engraving, with a built-in fan. However, there is no obvious way to attach a pipe or tube to guide the fumes outside. I designed a coupling…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
I had several 2.5" router fence fittings laying around my garage and thought I'd repurpose them as exhaust connectors on my LACK enclosures. I was looking for a bracket to secure the connector as a pass-through on the rear plexiglass…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
I created an air conditioning exhaust including a plug against unwanted influences (insects, birds, etc.) I used full perimeters and 0.25 layers. Very easy to print. I put insulating tape between the plug and the exhaust body (with 1mm…
Print approx. €9.66–€11.80 excl. taxPreliminary estimate for one variant
This is a simple 4mm thick spacer frame for the Lado Exhaust Duct by Jesh for the Prusa Core One to increase the clearance on the left. I added little grooves, to which I superglued a rubber lip for additional sealing and vibration…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Container to hold HEPA filters and mount to exhaust (DN25) of scroll pump. Intended purpose was to capture scroll tip dust and reduce contamination of floor. Our system is UHV and noble gasses. Not advised for systems that have…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
This is a duct that you can attach to a $20 bathroom exhaust fan. I got the ReVent 50 CFM Quick Install Professional Ceiling and Wall Mount Easy Roomside Bathroom/Bath Exhaust Fan. The inlet is for a 4 inch hose. It has a rib so you can…
Print approx. €12.99–€15.87 excl. taxPreliminary estimate for one variant
La poussière de meulage produite par mon touret salissait le mur derrière ; j'ai donc réalisé cette évacuation pour détourner le flux de saleté vers le bas. Impression rapide en PETG, buse 0.4mm, hauteur de couche 0.28mm (mode draft) car…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
There are so many design decisions I really like about the 🥰 CORE One. But when it comes to the exhaust fan grid, it's just on the edge to call it " functional" 😟. So I felt I needed to design a drop-in replacement to fix the things I did…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
Bambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Features: Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan. Using air baffle design, minimize noise while…
If you intend to sell prints of this model, then please purchase a Commercial Use license version here . Main Features: - Improves thermals - Reduces fan turbulence by using circular cutouts for the fans - Easier fan mounting or swapping…
Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household
Update 26/11/2024 : 5 new models. Add ECAS + left side bowden input Update 06/10/2024 : Add plain cover Update 08/28/2023 : Stiffer cover and fix issue below for panel < 3mm Yes, this is another backpanel cover for Voron 2.4 ! I designed…
The model uses interlocking boards and a vent. The interlock is an angled dove tail that will provide a very tight seal (more air tight than the typical window seal kit). The interlocks are modeled with no clearance. You will likely need…
Help take down the empire with your new A1 3D Printer by flinging poo through the Death Star Thermal Exhaust Port opening! I modeled this in Shapr3D and there is a version without the exhaust port opening as well ;) Print in place, no…
Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…
Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…
I designed this system firstly for the obvious reason of keeping fumes out, secondly to easily switch the exhaust port for my airbrushing booth or printer, and to put a cover on when not in use (Helps with the air conditioning). I like to…
This is a simple design to allow one to use Activated Carbon Filter material with the Creality K1 Printer. Just cut some Activated Carbon Filter Material to fit then press-fit on the enclosure exhaust fan. This is the material I used:…
This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…
DONT SELL WITHOUT MY CONSENT. Permission can be bought for $10 Hello! First of all, thank you so so much for looking at my design! I would really appreciate if you could leave a like. I got some new crocs and I wanted to create some…
Just slice and print. No supports needed.
Simple attachment for the Dewalt 735 to get a 4"/100mm hose up and out of the way of boards exiting the rear of the planer! Simply push in the button on the stock port, rotate and remove the original stock black port. Install this…
Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…
I remixed the model from Uncle Jessy. I wanted a solution to filter and/or vent the exhaust from the Elegoo Centauri Carbon. The exhaust attachment is compatible with a 4 inch dryer vent hose. Link to the HEPA filters -…
A 45mm or so long duct to connect the QIDI Q1 Pro's print chamber 60mm internal fan to the vent at the back to allow hot air to escape without heating up the electronics. The original idea was based on the model below, only as I have my…
I printed a couple of 3DPmom's Rockets for my girls and was truly inspired by them. They were so simple and fun to fidget with! But I wanted something a little more realistic, so I studied her design and built this minimalistic version of…
This set provides a great way to remove waste poop and chamber emissions from your shiny new Creality K2 printer. The set includes the following models: The main single part “Y” piece which connects to the twin exhaust outlets using a…
An exhaust duct for your Flashforge Adventurer 5m Pro to fit a 100mm / 4" hose. Three parts: Internal duct to prevent the printer from venting into the motherboard cavity. This has holes for 4 off 6mm diameter, 3 thick magnets, but really…
Update : Added INVERTED version, in which the CNLINKO LP-12 is mounted upside down. This makes removing it easier, since the previous version didn't leave much space between the clip on the connector and the frame. If you don't mind the…
I made this exhaust pipe plug to use when I wash my motorcycle. It will fit exhaust tips from 12mm to 38mm inner diameter. It's modeled to print without supports or brims on its side. The small flat section it sits on does not affect its…
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…
An adapter to connect a hose to the printer to vent harmful fumes. There is space for a fan, which can be powered via the printer’s USB port. Four holes are provided for using M3 heat-set inserts to securely attach the adapter. The…
Exhaust Duct Adapter that attaches to Bambu Lab X1/C 3D printer to secure four inch exhaust duct. There are holes that line up with the mystery holes in the back panel of the Bambu Lab X1/C printer. The holes on the printer are not…
I liked the previous version, but most people dont have oddly sized magnets on hand. I created this one that uses two stacked 6x3mm magnets. Thats 6mm round and 3mm tall, stacked on top of each other. The hole id 6.5mm round and 6mm deep,…
I created a DIY airbrush spary booth using two Ikea Samla boxes and a bathroom fan as the exhaust. However, the output of the fan is to a 6 inch hose which did not fit my needs. Therefore I needed a way to reduce the connection size from…
"Start yooooour engines: chuga chuga ChUgA POP VROOOOOOOOOOOOOOOOOOOM!" Hehe ;) oKAY sorry for getting distracted there XD. Thank you so much for looking at this. YOU ARE AWSOME! This bad boy is sicK with a capital K. I was going for the…
This is an exhaust kit I designed for the Elegoo Centauri Carbon to exhaust any fumes out when printing parts like ASA, ABS, etc. Included is the following Printer to 4" Duct Adapter Printer Auxillary Exhaust Cover 4" Duct to Fan Adapter…
I was intrigued by the various exhaust fan mufflers for the Bambu X1, and since I had just acquired Fusion 360, decided to create my own version as a way to get up to speed with F360. I wasn't really expecting to make a quieter version,…
Using Merkelerk's nice fan cover design ( https://www.thingiverse.com/thing:2755547 ), I made this exhaust pipe and modified the fan cover to mount a 80mm fan for an Ikea Lack enclosure. The exhaust is 0,5 mm higher than the thickness of…
I needed a 4" extraction port for my K1 Max for printing in ABS, but the only one I could find required the use of TPU filament (which I don't have) as it needs to flex in order to fit. I remixed it to attach with some magnets I already…
I created this exhaust system for my own printer/window setup, but sharing it here if anyone needs something similar. Minimal supports required, all the STLs should be in the correct printing orientation and do not require supports,…
A print that improves heat management and ventilation on QIDI's Q1 Pro printer. An internal duct guides chamber exhaust out of the machine's back panel. Adding this duct has three benefits: * Your printer's power supply and main control…
Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.
Simple and quick exhaust port cover for the Qidi Q1 Pro. Use to mitigate heat loss and fumes exiting the printer. Works with existing screws, no additional hardware needed. Note: The back of the printer has large gaps exposing the…
Description: Use the excellent Parametric Umbilical Gland (PUG) , instead of a PG7 or similar, to secure your Voron umbilical through the exhaust grill. It also provides a location for the reverse bowden tube. You can use the Parametric…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
Update 24/12/2022: Bottom exhaust uploaded was incorrect and didn't include the bottom L shape cut-out. This has been corrected in the latest version (v2). Description / Changes A modified version of RISCie's BentoBox 5015x2 Fan blower…
This window exhaust hose adapter is for a 150 mm PP hose (150mm PVC should be good), and I tried it with PETG and a 0.6 mm nozzle. The extra adapter bits are supposed to be a little loose, so you'll need some glue. You can switch the…
Print with any material you would like. No support required. Please see image as reference for suggested orientation for printing.
END FITTINGS This set of models includes 5 part files for various scenarios of venting your Creality K1/K1C exhaust outside. It's especially good for when printing fumey filaments like ASA or ABS where that half-filled OEM carbon “filter”…
I kept having issues with the amount of force needed to move the filament through the PTFE tube. The only way to get it to feed freely was to keep the tube's loop, behind the printer, overly large. This version of the exhaust housing lets…
I run a couple of FDM and SLA printers in a closet in my house. I wanted a way to exhaust toxic/smelly fumes out of this enclosed space without having to permanently modify walls or doors. This allows me to vent fumes out of a nearby…
This is a exhaust plug for a dirt bike or quad, designed so no supports are needed. this should work for both 2 strokes and 4 strokes, but if you are worried just scale it up or down to your liking. 10% gyroid infill seems to give it a…
Bambu Lab H2 Series 4-Inch Exhaust Duct Adapter (H2D / H2S / H2C) This model is a custom exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…
Back cover for Voron with support for PG7
This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit. The base was designed to cover a 6.38 in (162 mm) diameter hole drilled in drywall. Most can-light hole saws are about this size. The…
After completing my Lack Enclosure, the next step was to add an exhaust system, but the last thing I wanted to do was cut a big hole in my acrylic side panels. My solution? Cut a hole in the table surface instead! No hole saw or CNC…
A remix of my solid plate , for those who want to keep the rear exhaust housing in place. STEP file provided if you want to make any changes.
Designed to address the issue of ABS fume during 3D printing. ABS is a commonly used filament in 3D printing but can produce strong and potentially harmful fumes when heated. To ensure a safer and healthier printing environment, the…
I've replaced the stock Voron exhaust fan with the Nevermore micro so this is a cover plate.
Print with 3 perimeters for stability Use 4x M3 Threaded inserts, outer diameter 5mm, length 4mm: https://s.click.aliexpress.com/e/_DmG9Lyz
Exhaust for Creality K1 MAX with clip mounts. For pipe with a diameter of 90 mm and 100 mm. I printed with PLA, with outer and inner brim and without support.
Update: Made a version with a swept pipe and lip. Created a mounting bracket for the CC filters that has a 90 degree bend for connecting a 4" dryer hose for ventilation. I modified the case to load from the top, making it easier to access…
4-Inch Exhaust Duct for Qidi Q2 – Improved, Optimized, and Easy to Install Upgrade your Qidi Q2 airflow setup with this redesigned 4-inch exhaust duct , engineered to offer smoother airflow and easier hose connections compared to the…
Voron V2.4 Canbus Exhaust Filter Mod for M12x1,5 cable glands.
I designed this, in order to extract fumes from soldering and 3D printing directly out of the closest window. For this I use the AC Infinity Cloudline A4 duct fan. The model consists of three parts that can simply be stuck together. The…
This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…
Quick adapter to attach to the back of the carbon to extract the fume from the printer while printing ABS or ASA.
Fits EcoFlow WAVE 2 Portable Air Conditioner with Heater exhaust ducts E and D. It is hard to cut a perfect circle, so print these, screw and/or glue it to the board for a perfect fit. Cut the board to the size of your window and put some…
A set of left and right exhaust stacks for the CARF Models P51 Mustang. The shown examples were FDM 3D printed and textured by stippling acrylic paste with a stiff brush, painted and treated with a technical paint by Citadel called Typhus…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. We had an request to make a version with a side exhaust for our top hat Thanks to the awesome community for the suggestions, like always we are…
This parametric exhaust fan duct is designed for the Creality K1C to efficiently direct the printer's exhaust outside using a ventilation hose . The design is customizable , allowing users to adjust the diameter of the duct opening to…
The AOOSTAR R1 and R7 are great budget NAS enclosures for backing up important files, but they have one significant airflow related issue, the stock top plate prevents smooth exhaust airflow out from the top of the unit and it stagnates…
Here are a few options for exhaust/ducting for your K2 Plus. All-in-one → This is a single large piece which takes the output from both exhausts and takes it down to a single point. Attach your hose/duct and then attach the hose to a…
![60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others](https://media.printables.com/media/prints/84197/images/897846_4f0b8151-b2a0-429d-981c-156618d23e1b/fan_flowmaster_2.png)
