Search results: fault

Default ender 3 cat

Just an stl of the neko cat that is default in the ender 3 sd card. I just made it an stl

Side and corner pieces for the default honeycomb wall

Its side and corner pieces for the default honey comb wall

Side piece for the default honey comb wall

After downloading the files from the original post, I was missing the side part, so I made it. Thanks to the author!

Honeycomb Storage wall - default size edges

With special thanks to the original RostaP's https://www.printables.com/model/152592-honeycomb-storage-wall and along with Christian Long's https://www.printables.com/model/558180-honeycomb-wall-large-panel-format-edge-corners In order…

Calibration box to fine tune Default Extrusion Width, X/Y/Z/E Steps, and Flow Rate

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Are your parts not fitting…

EVA 3 Beacon Probe Default / HF Ducts

You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board. This uses 3.8mm…

Ender 3 Neo Series Default Fan Shroud ( For Ender 3 Neo, Ender 3 V2 Neo, Ender 3 Max Neo )

I made and tested it for my Ender-3 V2 Neo, but should work with all Neo Models as they use the same hotend setup. In my case, it increased airflow and decreased some noise too. The weight is also drastically decreased over the default…

Funny Sign - "It's not my fault you thought I was normal..." multi-colour print (no MMU/AMS required)

Another Funny Sign - "It's not my fault you thought I was normal, you've have more than enough time and plenty of clues to Figure That Out", multi colour print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny…

Valorant Default Knife

Edited the model from the game to be printed in multiple pieces, support might be needed for the blade. My print did'nt work out that way but if you have good tolerances you might be able to friction fit the whole thing.

Spool Tube For A Default Anycubic Spool Holder

An additional spool tube for a default Anycibic mount (Maybe others too). Check step or f3d for dimensions and compare to yours. Just in case.

Prusa XL - 0.3 Nm Nextruder Torque Wrench for the default TX 8 Torx key

Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…

The Ghost of the Default Cube

My attempt at printing a fellow Redditor's creation. The STL needed to be cut on top and bottom to ensure they are flat, and the print settings have been modified from preset. See the .3mf file I printed. Print instructions Setting:…

Dummy 13 Fortnite Default Pickaxe

This is a dummy 13 default pickaxe from Fortnite that I made using my dummy 13 accessory grip which you can find here: https://www.printables.com/model/1289048-dummy-13-accessory-grip Pictures coming Enjoy!

Case for Seeed XIAO ESP32S3 and the default antenna

I needed a simple case for bluetooth proxies. As I have poor signals, I wanted to place the antenna as far from the noisy/interfering electronics as possible. I do not need any of the pins, so they are not exposed. The case is snap-fit,…

Qidi Q2 Toolhead Cable Secure Clip Due to Manufacturer's Machine Assembling Faulty

THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…

SC / LC Adapter for Visual Fault Locator SG-10

I designed some Adapters to fit SC and LC Fiber Plugs on a Visual Fault Locator from Wish WARNING! don't use Pressure on screwing the Adaptors on the Laser. You can Brake your Laser Diod!!!

Roblox Pls Donate default booth

Roblox Pls Donate booth

Faceshield Spremberg V1 (for Mini, stackable, default german DIN punch - ISO 838)

Our own development is based on a remix of the original Prusa mask, which is a bit narrower and has an optimized hexagonal cutout. Our own adjustments / improvements are: Stackable version without support material fits on Prusa Mini print…

.177 and .22 air rifle pellets APFSDS. Untested, try at your own risk. If you mess up that your own fault

The thing is pretty basic and my printer says it should take 5 to 6 minutes. Also this is untested, it could explode or damage property. TRY AT YOUR OWN RISK. I will try it in my airguns, and update it with a partially tested or unsafe…

AAP01 like default outer barrels

This is models for many common inner barrel sizes. In addition to the standard round barrel options, options with a lower and upper bar are made. And also add option to use this outerr barrel with top ris and my TDC hop up module…

Ender 5 Afterburner bowden default Mk8 hotend

This is my take to fit an Afterburner on the Ender 5. This mod doesn't require to get a new hotend or even move the hotend from its original position. I used VORON's official STEP files and modified some parts and also added my own…

slap battles default glove

the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)

Fairphone 4 Rearcover [default]

I developed this rearcover by scanning-measuring. Just because the original one start to develop some cracks after some time. Unfortunately, installing this rearcover you will lose the NFC antenna, which is glued on the original…

EVA 3.0 Beacon Rev H Default Fan Duct

This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance…

Fault Block Models

These blocks allow my students to model the movement of Earth's crust along fault lines and plate boundaries. They also help model the formation of folded mountain ranges and fault-block mountains. I placed a highway on the top to…

CT Default Knife CSGO/CS2

CT side default knife. Prints great in PLA. Model is scale to size of in game model, may need rescaling for your printer :D works from scales of 20%-300%!

Laser guide for drill press (customizable, default holding pipe / tube diameter: 46mm)

A crosshair laser guide holder for two 12mm line lasers for a drill press from Parkside PBTM 500 A1 with 46mm pipe diameter but it is easy customizable by the spreadsheet in the attached FreeCAD file for other diameters and lengths. The…

T1 Reddot mount, riser - default high higher

Printable Mount for T1 Redot (China clones) in 3 different sizes. With a Paintball Mask I use the Highest one. Print Settings Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Herz PLA Category: Sport &…

parametric battery holder (9V default) / OpenSCAD custom container generator

I wanted a custom 9V battery holder so I developed a parameterized container generator in OpenSCAD. The program is generic and is useful for other sized containers (such as to accommodate other types of batteries or for organizing beads,…

Default Terrorist Knife from CSGO/CS2

Default T Side knife from CSGO. Prints great in PLA. Model is scale to size of in game model, may need rescaling for your printer :D works from scales of 20%-300%! Any issues, drop me a message!

Phone stand/holder keychain Mk2 V5 (resize to fit, default gap is 11mm)

If you want to make me happy and you have Discord, join my server ;) https://discord.com/channels/974098819379777566/1053870875444785163

Newtonian Telescope Parametric - default 200mm f1200mm 40mm

This Newtonian Telescope is fully parameterized, the default values are main mirror 200mmxf1200 and secondary 40mm. It is more compact to print and more stable when mounted than other projects, easier also to colimate. ps.: It is a…

Valorant default knife

The 3d model of the default knife in the video game Valorant. If you like the design please check out my YT channel (it's in Portuguese) https://www.youtube.com/c/zidergaming Category: Video Games

Customisable - Bookbinding awl insert - 20mm spacing default - openscad

Fits inside the 8.5" cradle - Available at - https://www.thingiverse.com/thing:3766352 Designed for A4 paper folded to A5. Has spacing for awl positioned every 20mm with a border of 15mm at each end. I am using this where I cut 5mm off of…

light RC wheel rim (default size) 2.2x1.9

lightweight 3D printable RC wheel rim design, weighing in at just under 27 grams. These rims are designed for TL-01, But they're versatile and fit most RC cars equipped with the standard 12mm hexnut. Key Features: Lightweight…

Case for PrusaMini default USB-flash-drive

Are you also tired of guessing which side of the USB stick has to go which way into the printer? Here is the solution: a housing for you default PrusaMini USB flash drive. The fun thing is, you might test some new technics: printing with…

[UPDATED] Camera Hood for Panasonic Lumix micro 4/3 default lens H-FS12032

I recomend you to print version V2 it has fixed problems. I have wanted lens hood for my Panasonic Lumix GX880 with default lens H-FS12032. It is really hard to get them and they are not cheap, so I designed it and 3D printed it. If you…

Parametric radial fan duct (9733 fan default)

Blower fans often come with a duct fitting, and I'm very surprised no one's made a replica of them for printing. The included .stl is around the right size for a 9733 blower fan to fit a 19mm CPAP tube, and I've included the .scad file…

BumpMesh Test – Sample Plates for Default Textures

These sample plates allow you to quickly compare the different BumpMesh default patterns in three different sizes, helping you determine the best choice for your own designs. BumpMesh.com is an awesome free tool created by the YouTuber…

Normal Fault Block Model

A simple block model showing a normal fault. It has a removable core for stimulating additional discussions during the class. We use them in our GEOL101 labs and Geological Field Techniques classes. This is one of eight models used by…

Default cube , yes literally

literally a default cube...

Reverse fault block model

A simple block model showing a reverse fault. It has a removable core for stimulating additional discussions during the class. We use them in our GEOL101 labs and Geological Field Techniques classes. This is one of eight models used by…

Tronxy Crux1 Print Cooling Duct (default)

This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…

Slab Default Stock Flat Buttplate

Very similar to https://www.thingiverse.com/thing:5752277 , but I made it fusion so it is editable. Mostly a byproduct of the double slab project but without the “widening” that is required for that one. The fusion file is a copy of the…

Thomas Refault Balisong Inserts

Inserts/Inlays I made for the tanto and bowie blade of the Thomas Balisong Refault. The best material for printing is TPU or PLA/PLA+ and recommended layer height is 0.16mm. If your printer is well calibrated, they should fit as they are,…

Charging Station / Phone Holder (Parametric, by default for PinePower)

A simple charging station design with an opening below. By default, the opening is designed for PinePower or something smaller than its size, but you can customize the dimensions by downloading the OpenSCAD source. You can also adjust the…

Default Cube 1:50 scale Pedestal

A pedestal for a 1:50 scale model of Blender default cube (a 40x40x40mm cube). Cube STL also included :).

Magnetic Vice Soft Jaws – Customizable Inserts for Drill Press Vices (3" Default, STEP File Included)

These magnetic soft jaws are designed to protect delicate workpieces in a drill press vice, improving grip while preventing damage. They snap firmly into place using embedded magnets for quick install and removal. There is one jaw face…

It's not my fault you're stupid sign/bumper stick

A great way to let everybody know the obvious. it has 3 holes for 12x3 mm Magnets on the back. makes a great magnet or "Bumper sticker" Print instructions Execute a color change at 3.65mm for colored lettering

Knomi v2 mounting bracket for the sv08 in place of the default screen

This is designed for the Knomi V2. there is a spot to run a usb cable to the knomi but will will have to be right angled and very thin to fit. I used the 5v and GND from the old display ports that i am no longer using

Christmas Fault Light Tree Ornaments

Ender 3 Direct Drive Adapter for Default Stepper Motor

Slight remix to a design i found on youtube by user DCL. Made to fit standard OR upgraded metal dual gear extruder like mine.

Grenadier - ADAS fault light mask

If your Grenny ADAS idiot light is on, this mask will hide it so that it doesnt annoy you (until you get fault corrected, of course!)

Dextral fault

A simple block model showing a dextral fault. It has a removable core for stimulating additional discussions during the class. We use them in our GEOL101 labs and Geological Field Techniques classes. This is one of eight models used by…

Parametric Ball Bearing Caps (26mm default)

Default model is 26mm outer, 10mm inner. SRC file is included, adjust the parameters to your needs. Height can be adjusted manually. You basically want them to be a bit smaller than your bearing so that it fits tight.

Steam Frame Default Strap 3D Scan

I got sick of waiting for @NotValve to release the cad files so I scanned the head strap. Scanning the actual compute module is much more difficult due to it being made of shiny, black, smooth, featureless, ir transparent plastic. Also…

Sinistral Fault with inclined markerbed

A simple block model showing a sinistral fault. It has a removable core for stimulating additional discussions during the class. We use them in our GEOL101 labs and Geological Field Techniques classes. This is one of eight models used by…

BTT Eddy mount for Elegoo Neptune 4 Pro default bed probe position

This is a custom mount for installing the BTT Eddy probe on the Elegoo Neptune 4 Pro in the same location as the stock bed probe. Other available mounts I tried either reduced the probe’s usable scanning area or clashed with Elegoo’s…

Filament FAULT sensor - REMIX - Tangle and/or Runout

This is a REMIX and enhancement to the Filament FAULT detector by re-NABLE. re-NABLE's design is good, but I had a couple minor issues: I wanted to integrate it into a heated dry box: https://www.thingiverse.com/thing:2778707 The re-NABLE…

Anet A8 Plus dressup kit addon for printed y axis belt tensioner modeled by FaultedLogic.

ant a8 plus dressup kit addon for y axis belt tensioner made by FaultedLogic.

Lowrider 2 XZ with Primo Belt tensioner remix with default mounting hole diameter and M4 hole diameter

For use with 25.4mm tubing version of LowRider2 CNC router This is nearly identical to DNA's awesome remix found here: https://www.thingiverse.com/thing:5236620 of Ryan's (of V1 Engineering) XZ design with the exception that I reverted…

Ikea Besta default feet covers

Nearly ‘invisible’ cover to make the ugly default feet of the Ikea Besta line of furniture dissapear. The height worked for all my uses but you might have to cut it down abit incase you have turned the feet down all the way.

Hybrid xLCD-Cover with default CORE One pattern (Multi color)

I needed an xLCD for my CORE One Mini Project to visualize properly in CAD - the original injection-molded cover in the official CAD model did not have any patterns or writing on it, so i've recreated this. While doing so, i figured: why…

Magnetic Name Tag(Default name:Tommy)

onshape model Please download here as well so I get credit prusameter even though it's mostly through onshape Instructions: 1) open onshape model and make a copy of the workspace 2) open the “name” part studio a) double click on the…

Christmas Bell Earrings 22mm Update SORRY Christmas Bell Earrings 01 faulty. Print in Place (2 Gramm)

Weihnachtsglocken-Ohrringe 22 mm Sorry LEIDER hat sich beim exportieren von Christmas Bell Earrings 01 ein fehler eingeschlichen. ( Schlägel fehlt ) NEU , Update Christmas Bell Earrings 02 ( mit Schlägel )Print in Place Weihnachtsglocken…

The Stranger the Electrical Problem, The More Likely it is a Ground Fault

Perfect decoration for your lab or workshop. Quote attributed to Dave Jones of the YouTube Channel EEVblog. (Sometimes called Dave's Rule or Dave's Law.) My design. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No…

Default Cube meets Suzanne, a Pixel Monkey Storage Box w Pen Tail

Ever wondered what would happen if two Blender icons—“The Default Cube” and “Suzanne the Monkey”—had a baby? Probably not… But I bet it would look a lot like The Simia Creativa—a creative pixel pal with a handy monkey tail 🐒 that can hold…

Universal Cap, D.19mm default dimension. TPU printing recommended

Universal Cap D.19mm default dimension TH.0.6mm. designed to cap the Floor coat hanger metal ends you can scale to use it in multiple scenario, and if you print it in TPU 70A, you can use as end protection

"Vanilla", a pseudo-default T114 Enclosure.

Forword: I am really bad at 3D modeling. That spaghetti-tree of garbage you're about to witness if you're good at FreeCAD? It works. That's all I can say. I did a lot of redundant things I'll get better at later. The main goal of this…

DEFAULT_ROBLOX_CHARACTER

Hello guys, I would like to introduce to you my new model. It is Default_Roblox_Character. I hope you will enjoy it. Support needed, as you can see in the picture. If you will have any trouble, write me and maybe i will figure it out :D.…

Hex Wrench Holder 2.5mm, 3mm, 5mm, and 6mm (Default and now upgraded with 4 and 8mm) - URTOPIA Bike Hex wrenches.

The Utopia Bike I purchased came with four hex wrenches: 2.5mm, 3mm, 5mm, and 6mm . To keep these tools organized, I designed a simple holder for them. After adding a water bottle cage , a rear rack , and some different pedals, I created…

Plant Support for rod (parametrized ⦰, default ⦰ 1cm)

Different sizes of supports and forms for plants that uses a ⦰1cm rod. The clamp system and the opening in the front allows to easily install the support to the plant. The clamps are designed to be stackable. This allows to have multiple…

Enclosure default spool stoper

This is for the default internal spool mount in the prusa enclosure kit to prevent the spool from sliding and possibly colliding with the extruder assembly It can be split and glued together or it can be printed as is and then inserted by…

Keychain wheels disk default

wheels disk default

outlet socket base for fault coverage

I created this outlet base plate to cover imperfections during repairs. It was specifically designed for the Nereya brand, but I believe it can be used with any brand.

Default Car

My first car

Robot Vac Skirt Extender (Default Values: Hoover Performer Plus)

Robot Vac Skirt Extender For Model: Hoover Performer Plus Author: Brian Khuu 2019 This ensures it doesn't go over carpets or doorstops if needed. This is mounted via M4 screws in the Hoover Performer Plus Print instructions Category:…

Filament spool holder adapter from thick frame to default Prusa model for 6mm frame

My printer was built around 10 mm steel thick frame. So the standard spool holder is insufficient and I had it printed already. So I designed this to accomodate the spool holder for standard 6 mm thick holder. Snaps on the frame and then…

9V Battery Fault Indicator & Tester Holder

holder for a 9V battery tester with integrated battery slot to check faulty or weak batteries. Printed in PLA , lightweight and durable. Features two mounting holes for screws to easily fix on a wall, pegboard, or workbench, keeping your…

It's not my fault I have a RDF - Funny desk sign

Add some funny into your office or desk or wherever with this desk sign. This is perfect for anyone with any, sense of humor ;). It also makes for an interesting conversation starter.

Converting a faulty Starlink Gen 1 antenna into a coffee table

Conversion d'une antenne starlink gen 1 défectueuse en table basse Converting a faulty Starlink Gen 1 antenna into a coffee table

Ender 3 - Direct drive for default elements

Since I couldn't find the correct direct extruder drive file for the stock Ender parts, I had to create it myself. This fixed the threading issue for me. The previous models I found were slightly offset, causing the connectors to be…

"Fault in our Stars" Keychain "Okay? Okay." (Import from thingiverse)

The imagery from "The fault in our stars." Model is re-uploaded from thingiverse. License CC BY-SA "Fault in our Stars" Keychain (Okay? Okay.) by Y_Dascalu is licensed under the Creative Commons - Attribution - Share Alike license.Tags

Default iOS wallpaper

so this was made by chatGPT with this photo i borrowed off reddit . the photo is for what its supposed to look like

RC Car 2n1 Modular Ramp 2x2 default V2.5 for 1/10 scale or smaller

Takes around 9-10 rolls on my settings which is around $100 if you get 10packs on amazon. My goal is to get this ramp mass produced to be able to sell it for what a hq 4s battery cost. Thanks in advance for your support. Any questions…

Qidi Q2 Toolhead Cable Secure Clip Due to Manufacturer's Machine Assembling Faulty

THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…

Keychain wheels disk default

wheels disk default

Montereau-Fault-Yonne, France - 3D Miniature

3D printable topographic miniature of Montereau-Fault-Yonne - 🇫🇷 France Capture the beauty of Montereau-Fault-Yonne 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…

slap battles default glove

the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)

Filament spool holder adapter from thick frame to default Prusa model for 6mm frame

My printer was built around 10 mm steel thick frame. So the standard spool holder is insufficient and I had it printed already. So I designed this to accomodate the spool holder for standard 6 mm thick holder. Snaps on the frame and then…

EVA 3.0 Beacon Rev H Default Fan Duct

This is the standard fan duct (Bottom Horns, as mentioned on the EVA site) with mounting holes for the Beacon Eddy Current Surface Scanner Rev H. Updated the height of the mounting platform to allow for the recommended 2.6 mm clearance…

Tronxy Crux1 Print Cooling Duct (default)

This is the print cooling duct that came default with your Tronxy Crux1's gcode turned into stl. Smaller layer heights is recommended and also a filament that withstands higher temperatures + wear and tear since you will be screwing into…

RC Car 2n1 Modular Ramp 2x2 default V2.5 for 1/10 scale or smaller

Takes around 9-10 rolls on my settings which is around $100 if you get 10packs on amazon. My goal is to get this ramp mass produced to be able to sell it for what a hq 4s battery cost. Thanks in advance for your support. Any questions…

VW, Audi Skoda, Seat P2015/18447 Fault Code Fix (Plastic Manifold)

Fixes well documented Intake Manifold Flap Fault Code (P2015 / 18447) on VAG 2.0 CR TDi Engines. This is for use on engines with Plastic Inlet Manifolds (03L 129 711 AG) Use a heat resistant filament, i used PA-CF (PETG started to warp…

Montereau-Fault-Yonne, France - 3D Miniature

3D printable topographic miniature of Montereau-Fault-Yonne - 🇫🇷 France Capture the beauty of Montereau-Fault-Yonne 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…

Abs filament fault test

Print this file and get the difference in the original sizes. Add the difference obtained with internal measurements and subtract for external measurements.

Faulty Soldering Iron Stand stabilizer upgrade

Some super cheap soldering iron stand is very faulty and dangerous to use. Mine happened to be that one, and it came with beginner's soldering package. ( This one from Walmart seems very much identical. ) Spring part on this model is…

Land rover - suspension fault - keychain

Keychain based on Land Rover Discovery 3/4 suspension fault gauge cluster icon