Counting matching models…
Modular HDD bracket for older Phanteks cases (Evolv ATX, Pro M, orP400/P400S). Recommend printing standing up so that the mounting face is on the print bed. The screw holes are sized to allow the standard HDD mounting screws. Printed with…
Replacement drive caddy for Phanteks compatible cases. Supports 3.5" or 2.5" drives with standard M3 drive mounting screws. Original (discontinued) mount from Phanteks : https://www.phanteks.com/PH-HDDKT2.html Printing Recommendations :…
Phanteks Evolv Shift XT case modification to fit AIOs over *60mm tall. Made to fit the Phanteks Glacier One 240 30T AIO. But will work with other AIOs as well. The mod was designed to blend in with case. *Will fit up to 70mm tall…
This tray is designed for the Phanteks Enthoo Pro 2, I have no idea if it will work elsewhere. It holds 6 drives in the upper drive storage area. Model should work fine in the lower half as well, concurrently. This turns what used to hold…
This is a drive caddy for the Phanteks Enthoo Pro case. It slides in and out locking into place with tabs that you squeeze to unlock. I shucked a drive and the bottom and side bolt holes on the drive didn't match the caddies that came…
I needed an SSD Tray for my Phanteks Enthoo Pro M. And why not making one myself. Category: Computer
Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…
Tired of your kitty cat deciding when gaming time is over? Then you need this! Or a fence, I don't know, either way I cannot guarantee that your furry friend won't be able to figure out how to still turn your PC off. To install simply add…
If you bought this cooler before AM4 was invented, these 2 parts are the solution, to be able to mount on an AM4 motherboard. Reuse 4 screws from coolers AMD kit, and add 2 M3x16mm screws and 2 locknuts. Printed in PETG 100% filling, and…
This is a printable, customizable insert for the PSU cutout on Phanteks cases. I made this file because my SuperFlower PSU has a data sheet on the side facing out when installed fan-down, which isn't very good looking. I modeled this case…
Designed a better solution to mount the Phanteks Neon light strip around an ITX board. It helps to keep the strip in line with the mainboard. Some points to keep in mind. It is offset at the bottom for the pci riser in the SSUPD…
I made this simple LED strip holder / straight section for the Phanteks Neon LED strips ( https://a.co/d/9oWwbQO ) on Amazon. I did not think the kit came with enough to keep the LED strip straight The strip fits nice and snug. no support…
Be sure to add a few extra perimimeters to ensure it's strong enough. I've used 3 perimiters on a 0.4 nozzle and it held up fine, should probably use 4 just to be safe though. The mount is for horizontal mounting only. If the cooler is…
Building a new PC the airflow didn't really make sense, there seemed to not be enough fresh air for the GPU area. So, i bought 3 60mm fans that fit in the little perforated space next to the PCI expansion slots, and made a bracket to…
No worries, this thingy won't harm your cat. Make sure you don't print it too spikey. Print twice to replace the top lid from the PC case with those. You could technically put it on top of the lid too, but probably requires some method to…
Wanted to attach the following fan duct to my FormD T1 2.1 case with Phanteks T30 exhaust fans and didn't want to use screws. I did slice the top of the fan duct to be 8mm tall so it sits against my top panel.…
A easy to print mount for the Phanteks P400A (might work with other Phanteks cases) No supports needed, use original screws from the case and route the cables from the Fans on the front. disclaimer: might not fit exactly as I made this a…
This is a GPU bracket for the Phanteks Enthoo Evolv and Evolv X cases. Modern GPUs would not fit the orignal case bracket so I remixed this one - It can handle a modern 2 slots GPU now (a 4060 Ti in my case). GPU fans are facing inwards…
Print instructions: Printed with PETG. Infill 15-20%. Print the thread and nut without support . For the dust filter I used PVC sheet, 0.45 mm thickness with 1 mm holes , fixed in place with super glue This is an unofficial,…
An SSD mount for the Phanteks Enthoo series cases. I tried this model previously: https://www.printables.com/model/202088-ssd-tray-phanteks and found it to be lacking in a few areas: Side walls are thin and fragile Slightly undersized in…
These guides exactly fit two Phanteks Neon light strips inside a Lian-Li O11 Dynamic case. The one guide is designed to be stuck to the back with double sided tape and guides a strip around the GPU and a 120mm rear fan. The other is…
Slightly longer fan mounting pin for NR200 top panel to allow for installation of Phanteks Halo RGB addons to the fans. I could not make holes for the original fan grilles to screw into as the walls of the pin would have been too thin for…
A cover for a DVD drive
FormD T1 Phanteks T30 Duct - Works with EIGA Shoud or Standard
the foot of my PC Case broke while moving it, so i recreated a replacement. I think it could mirrored to fit the other side.
Replacement for the Phanteks LED Strip case mounts, meant to support the full lenght of the 55cm strip and avoid unwanted bends. This specific set is meant to follow an ATX motherboard outline, by following the right edge and wrapping on…
Print two. A hose clamp will hold them together, so the seam only needs glue or tape to seal. Fitting the duct on is very snug. Made with 0.4mm increments in mind for 0.4mm layer heights.
Required hardware Phanteks Enthoo Evolv X case Re-use original screws from mounting brackets 4pc M3x4 screws to fix sideskirts to risers (optional because of friction fit, taller screws can be used as well) 2-4 M3x7 screws to link the…
Extra holders like the ones that come with the Phanteks Neon strips. They're 21mm square if you're gonna back them with tape. The straight no hole version can be scaled to be as long as you need as well if you scale along the channel.
I have Hantek DSO2D15 Oscilloscope. I get this Idea from https://www.thingiverse.com/thing:2127891 but that one isnt compatible with DSO2D15. You need to print 2 times hantekFeet file. A should point forward also B the same. Im very lazy…
Simple but effective fan duct. It can be mounted to a 140mm fan in the front of the case. Print settings: 2 walls 10% infill no supports ---------------------------------------------------- Einfacher, aber effektiver Luftkanal. Er kann…
Cover and holder for three USB ports on a Phanteks Evolv Shift 2 computer case. Adds one extra USB-C port to the existing two USB-A ports. Requires a mainboard with a USB Type E connector and a suitable front panel adapter cable like this…
Custom covers for the rear ITX motherboard plate. -Included a blank plate so that you can design your own. 1/3/2021- Fixed Seasonic plate Print Settings Printer: Ender 3-v2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
Original Thingiverse model with pre-defined hex cutouts modified as follows: front region made solid with modifier thinned to 2mm with modifier set to no top/bottom infill with modifier infill set to grid @50% using modifier (honeycomb@…
For installation, the rubber corners should be removed from the top side of the fan for a better fit. Requires standard PC case fan screws.
A nice little cover for you SFX-PSU in your Phanteks Evolv Shift X Case. Do not forget to put the screws back from the old cover and mount the rubber thing. I did not liked the default one (image5) as it leaves a big gap. Print…
I was getting annoyed by the thermal issues I was running into with this case. I love the design but the bottom was getting nuclear hot. These feet attach snugly to the existing ones and raises the case about 10mm for airflow. I suggest…
A fake SSD to fill the mounting points on Phanteks cases directly, no sled needed. Remixed from Polypropylen's model (https://www.thingiverse.com/thing:2798163). Added the NVIDIA GeForce Claw Logo with boss and embossed versions Contact…
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
This adapter allows to install PCIe cards in a 140 mm fan mounting point of your case. This model comes in three versions: A generic 140 mm version (shown in the first photo) that should be suitable for all cases: V1 generic 140x140 mm…
A custom nameplate for your case. All you need is some superglue and two little magnets (max diameter 10mm) Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: does not…
I use my Phanteks Eclipse P200A case as a NAS, and the optional HDD cages purchased with it leave very little clearance for the power and SATA connections to the drives. With the cords pressed against the side cover, it was actually quite…
The screw depth on my Corsair XR5 360mm Radiators was very inconsistent, ranging from 3mm-5mm. Using 35mm screws with my Phanteks D30 fans worked for some holes, but ended up damaging the radiator at one corner due to the hole depth being…
Don't have an SSD in the front bracket of your Phanteks Enthoo Evolv case? Use this. I included the Fusion 360 file so you can modify the top of it to include whatever logo you want. I printed it with Simplify 3D using multiple processes…
Hantek current clamp holder
About I've been a fan of this pc case since its release but struggled with temperatures and airflow. I thought it would have been a no-brainer to include air boosters for the bottom half of the pc case aswell instead of just two…
I used the Phanteks LED strips when I built my computer, but I wanted the strip on the top to angle down and shine more on the interior of the pc. This is the same size mount that comes with the LED strips, just angled at a 45 degree…
Have you been wanting to spice up your Cooler Master NR200(P) with some of the cool Phanteks LED's everyone's using, but the adhesive backing and “universal” brackets not doing the job like they should and constantly sagging down? Well me…
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
This model is a cover for the inside of the pc case of the series Phantek P400, P400a and P400i. they may also work on som other versions of phanteks cases, but unknown which. The cover is ment for hiding away some holes that can be used…
These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…
A set of fan covers designed for the Phanteks M25G2, made to match the pump fan cover on the Glacier One M25G2 AIO. The covers make use of the fans’ mounting holes, so they are compatible only with these fans and will not work with…
Summary This is a stand to hold a Hantek 6022BE USB oscilloscope and an ASUS Nexus 7 tablet. There is also a block to hold the oscilloscope probes, a Power Bank battery and a stylus for fine control of the touch screen on the tablet. STL…
cover for hdd mount in some phanteks cases
This is an STL for the covers on the Phanteks Enthoo Elite. The model is blank and can be modified.
Uses 6x2mm magnets. Two different sizes, standard and larger when you want a bit more coverage. The magnets stick out just a tiny bit but if you don't like that you can scale the z height.
This is a simple wall mount designed for the Hantek 6022 USB oscilloscope. The idea was to free up valuable desk space and keep the device neatly secured to the wall when not in use. The mount holds the oscilloscope firmly in place while…
This is a simple support bracket or column with a base/foot that has bottom-side tabs/posts that fit in the 'alternating brick' hole pattern venting used in the Phanteks XT Pro Ultra PC case. It is specifically used with an AMD brand…
Front and rear stands for P500A Desktop Case. Raise off floor/carpet to allow more air to PSU etc. 30% at least infil 0.3mm res
Secured with fan screws.
Need to print: 2pcs of “Tablet_Laptop_Hantek6022_Stand_17mm.stl” or 2pcs of “Tablet_Laptop_Stand_19mm.stl” I recomend use of USB C Hub with at least 2 USB ports (for hantek supply) and one HDMI port - this allows to use Laptop as normal…
I'm using an AIO water cooling with two 120mm fans on the side of the case for cooling...that's why there's not much airflow in the case... There is room for two more 120mm fans on the bottom side, but there is no way to mount them... so…
Can't find any matching stand for this heavy case (net weight 13kg), so decided to make one. Printed using Prusa Core One + and PETG (you may try with PLA if you want to), with 0.2mm structural profile and these custom settings: Fill…
Hello! This model is for a stand to put your favorite IKEA Samla 22l box on top of your computer case. There is a parametric F360 file so you can make it suit your needs. The parameters for the computer case are marked as favourites in…
Phanteks style 92mm fan grillPhanteks style 92mm fan grill
Phanteks PC Case Fan Plate cover for unused space, Print in your wanted magnet size. Print with 10% infill, that is enough. Plate face down on silk bed is best. .3mf and .stl
It's a 3D-printed cover designed to seal the large opening between the interior compartment and the radiator in the Phanteks Evolv Shift XT. Specifically made for setups using the Arctic Liquid Freezer III 240 ARGB, it helps improve…
Exchange Part for the Glas Panel
Hantek 6022BE Oscilloscope mount for IKEA VATTENKAR. Surprisingly very stable, needs only two M3 screws for mounting.
Ce panneau avant modifié a été conçu pour le Phanteks Evolv Shift XT , un boîtier compact et évolutif. Il remplace le panneau d’origine afin de permettre une visibilité complète de l'écran quelle que soit la configuration du boîtier : ✅…
Made a simple adapter plate that slots into Phanteks' 2.5" SSD sled mounts, that allows for additional cable management in Phanteks cases. Uses the short hook-n-loop strap and PWM6# x 6mm screw included with the case. I used variable…
This is a PCIE support spacer for the Phanteks Premium GEN5 Vertical GPU Bracket riser cable. I wanted some extra support underneath the PCIE connector on the bracket because I didn't like the flex it had. This way it has some additional…
Sondenhalter mit Kabelhalter
print in place the wall mount part will need some supports to hold the probe holster part or a cut and printed seperately print in a filament of your preference, preferably something rigid like PETG or PLA. ~15% infill cubic mounting the…
I designed a 92mm fal holder for Phanteks Shift 2 to use the top as exhaust. It has 2 piece you can route fan cables inside the RGB unit holder. Other than fan screws no additional screws needed. You can use original screws at exact…
I needed a third air block for the Phanteks NV9 and the case only came with 2.
An organizer for my current probe
Mount your Hantek oscilloscope to the side of your table to save precious space and have easy access to the connectors. If you want to modify the model, you can. I am including the source FreeCAD file. Feel free to remix and improve. If…
Phanteks PC Case Mod with Sony Cardreader Housing for above the Case Feet.
Simple grill cover to hide the basement hole above the hard drives of my pc case, but to also allow air circulation. Made 2 little stands to add 6x3mm magnets then glued them to the grill for a seamless fit. I used 20% infill with white…
A simple and flush mount for a standard 5 inch Raspberry Pi Screen, fits to the back fan mount with no modifications to the case! Parts needed: Raspberry Pi Screen: https://amzn.eu/d/0il68j7 -…
This my first attempt at modeling. This bracket is made to mount a 3.5" HDD in the Phanteks Evolv Shift 1. It is positioned under the rear exterior cover panel and uses the original rubber drive mounts from phanteks. The mount is meant to…
Remix of an HDD to replace proprietary HDD cages for the Explipse G500A
Can't find any matching stand for this heavy case (net weight 13kg), so decided to make one. Printed using Prusa Core One + and PETG (you may try with PLA if you want to), with 0.2mm structural profile and these custom settings: Fill…
A simple and flush mount for a standard 5 inch Raspberry Pi Screen, fits to the back fan mount with no modifications to the case! Parts needed: Raspberry Pi Screen: https://amzn.eu/d/0il68j7 -…
Cover and holder for three USB ports on a Phanteks Evolv Shift 2 computer case. Adds one extra USB-C port to the existing two USB-A ports. Requires a mainboard with a USB Type E connector and a suitable front panel adapter cable like this…
Mount your Hantek device to an Extrusion (30x30 in this example)
This mount will let you hang your Hantek 6022BE/BL on a pegboard along with provisions for the probes and cables. Print as-is on the model's side. PLA is recommended for rigidity.
This model was printed in ABS, but can be printed in any other filament.
Fan bracket to install 120mm fan instead of second PSU cover. Just because why not? Supports both inside and outside fan mount for better compability. Requires some supports to print the bottom lip.
Finally a proper way of storing my hantek oscilloscope with its probes. No support needed :) Category: Electronics
Hanger to hang a Hantek 6022BE scope behind an LCD monitor. Category: Electronics
Handy Ikea Skadis mount for Hantek 2xxx series multimeter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Plexiwire PLA White Category: DIY
Holder for the Hantek Oscilloscope Multimeter. I recommend scaling it up to 101% for the holder since it is a bit of a tight fit. The mounting prongs for the skadis can be glued to the back, or you can design your own mounting mechanism :)
