1,733 models
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
I needed a holder to hold my paintbrushes horizontally and not on the wall. Couldn't find an existing one so made this. Included the STEP files and print files in case you want to modify it at all.
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant
I wanted to hang my McLaren F1 horizontally, but I couldn't find a bracket for it. So I made one! Fusion 360 files included, feel free to modify. The screw holes might be a bit small, but I had no problem with 4mm screws. Gcode file is…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Since I don’t have space for a standard spool holder and even for any vertical spool holder, i have used or rather tried to use horizontal spool holders. I have used multiple types from this website. E.g. i have used this one:…
Print approx. €7.09–€8.66 excl. taxPreliminary estimate for PETGSource material: PET
Horizontal spool holder for hanging filament spools underneath the prusa mini base. It's using the bearing from the spool holder provided with the prusa mini, which makes is spin very smoothly. Quick swap of filament spools with screw-on…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET
This model can be printed in any material, but i recommend PETG. The model should be printed strong, so i recommend 4 perimeters and 25% infill. Happy Printing!!
Print approx. €8.61–€10.53 excl. taxPreliminary estimate for PETGSource material: PET
I hate having to unclip my batteries to remove them from storage and liked the look of this model. So, I decided to remix it to my tastes. The indent removal allows you to slide batteries in and out easy! The slight upward angle will help…
Print approx. €4.15–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
Hice dos diseños para el horno de un amigo que se le habían roto. Las imprimí el PLA pero no es lo más recomendable porque no tienen mucha resistencia al calor.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Addendum (January 2026) : In response to a comment ("the bottom lip that holds the phone is not quite wide enough") I added a second version (V02) with a wider lip. There are lots of phone stand prints available, but none of them quite…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Certainly better vertically, but prevents the top of the enclosure from opening. To be fixed with screws on the Ikea enclosure top. Now in color!
Print approx. €3.94–€4.81 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the following models: https://www.printables.com/model/152592-honeycomb-storage-wall https://www.printables.com/model/164614-honeycomb-storage-for-ikea-lack-enclosure…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Multiple designs: There are multiple designs included. Recommended print settings: - Size: 5x5x3 cm (smallest model), 5x5x5 cm (largest model), the models are resizable - Filament: PLA - Layer height: 0.25 mm - Infill: 20% - Nozzle: 0.4…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Project is still ongoing! At some point those flimsy Cardboard pieces will wear down or you already have lost them. In that case you can print replacements! Ill be updating the Collection over time. at the moment im testing and modeling…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
To replace original horizontal blinders end stops for textile tape or rope on my horizontal blinders. By time original end stops degraded and break apart. Koncovka s aretaci pro textilni pasku nebo lanko na horizontalni zaluzie. Original…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Pro tvorbu modelu v Tinkercadu jsem použil ikony kotlů ze hry jako inspiraci. Ke stažení je verze pro jeden extruder s výměnou barvy po určité vrstvě i verze pro MMU (model rozdělen na 3 kusy pro různé barevné kombinace). Edit: Na fotkách…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
Update: Hexagonal Prism is now updated to two new different models. There are different brands of sewing machines with different diameters of vertical sewing thread pins. For example some of my sewing machines have following diameter of…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
This Model allows the phone to be charged in horizontal and vertical Alignments. The model also contains a space for a wireless charger. The size of the wireless charger can easily be changed in the model by changing one sketch dimension.…
Print approx. €7.04–€8.60 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Card & token organizers for the board game 'Horizons of Spirit Island'.
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Stackable storage pole for your spools. You can print more tubes for stacking.
Print approx. €6.48–€7.91 excl. taxPreliminary estimate for one variant
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
The HF-WE-007 Drill Stand is a compact 3D-printed holder designed for drills with a 43 mm auxiliary-handle collar. It keeps the drill in a fixed horizontal position and was tested with the Black & Decker HD555K. Tested accessory setups…
Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant
A week ago, I started working for a new employer and, to my surprise, I received a company phone – an iPhone 16. Since its use is limited to confirming logins to company systems, I thought it would be a good idea to have it on my computer…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
The standard Zyxel T-56 modem/router by the Dutch internet provider Odido is poorly designed when you don't want to put it on a table. If you want to mount it to a wall the cables can't be plugged in and/or the power button is…
Print approx. €4.31–€5.26 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the original model by @mc2_project3d . Use CA glue to stick the 4 parts of REGGI BOBINA.stl together. This is a floating spool holder design for the Prusa Mini Base by @David Warboss
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This pair of supports is designed to fit the Black PSU of the Prusa i3 MK3S+. You'll need 6 wood screws of maximum 6mm diameter in order to secure it. There's a 3cm gap between the top of the PSU and the bottom of the table for 2 reasons:…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
Print approx. €2.11–€2.57 excl. taxPreliminary estimate for one variant
This mount enables secure attachment of a Büchel rear light to an Ergon bicycle saddle. It is screwed onto the two metal saddle rails. The holder is designed for a rail spacing of 41.9 mm (center to center). The rear light is secured via…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
support bobine pour stocker ou dérouler , possibilité de le mettre a l'horizontale ou a la verticale . trou dans le fond pour le visser sur une paroi . remplissage 15% et 0.40 draft
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
needed to deploy a solution for added a ROM drive to our HP Elitedesk 800 G4's. made a compact PC out of it. I think it looks nice and functions well. I do however suggest using hot glue to assemble. its mostly a temporary glue in this…
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for one variant
A simple horizontal stand for the amazing Solder Fingers 2.0 - soldering aid / helping hand by idig3D | Download free STL model | Printables.com Material: PETG/PLA Layer high: 0.30mm Infill: 15% Supports: No
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Note: This is not a full mount for the PSU. It holds one end of the PSU and is indented to work with another quick release model for the other end! I needed a quick and simple horizontal mount for my PSU after building a table and…
Print approx. €2.48–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
I created this bar to reduce the (visual) clutter on my workstation by mounting two sets of two orbs (four total) horizontally. They sit on my desk under my monitor. Vitamins: 2 orbs 2 screws from original Orb stand 1 original Orb stand…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Horizontal Lamp Designed for red light therapy lamp MITO LIGHT Bulb 3.0 ( https://www.mitolight.cz/mito-light-bulb-3-0/ ). can be used for any bulb with a 4cm socket. You can support me with Bitcoin or Lightning network HERE or normal…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
This model is made to work and land in the middle of a 16mm panel. You may screw it from under the panel to ensure you leave no visible traces. The part fits perfectly the existing locks. I do provide the step file so you can easily tweak…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
This model is meant to be used with big phones and a palet (~108mm diam, ~7mm thick) induction charger. Tested configuration is : Iphone 13 Pro essentiel b induction charger black 8005893
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. Long ago (Few years ago) I posted a model for a toothbrush stand here in Printables. Now comes the second edition, which is a horizontal holder…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
more stable horizontal stand for Puzzle box No.1 STAND ONLY! Stand for Puzzle box No. 1 from https://www.etsy.com/de/ → realy great Puzzle Box by the way! The default stand, which one comes with the model is very unstable,
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
This 2-piece 3D model combines the functionality of two things: your desk phone stand, and a small tripod. Pixel 8 Pro is too heavy for small tripods so I created this to hold the phone leveled at flipped orientation when capturing…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
A horizontal stand for the Lenovo thunderbolt docking station I made in order to reduce clutter on my desk and make the ports easily accessible. Unfortunately it covers up the USB-A, minijack and thunderbolt downstream ports on the front…
Print approx. €4.57–€5.58 excl. taxPreliminary estimate for one variant
Il est utile de visualiser la sortie du filament entre l'Idler et la tête de sélection. En positionnant le MMU de cette façon la visibilité est optimum sans avoir à se tordre le cou, et la position surbaissée et reculée conserve toute…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for PETGSource material: PET
This is a cool easy print for hold your Gopro in Horizontally. Basically for the overhead videos showing your canvas. I have upload a youtube short video about this product. Please have a look at it.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Print on the surface of the screw heads, then no support is needed.
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I updated this with slightly thicker walls, and beefed up the bottom wall. It was quite weak do to the holes and thin bottom. Print the case in PET-G for toughness. The stand folds with plastic hinges, so they last for a while but not…
Print approx. €1.53–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…
This DeWalt 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. Other battery…
This stand can be used to set up the Playstation (disc version) horizontally. I have remixed the original model.
Pre-cut for printing without support or in one piece.
The Thunderjaw from Horizon Zero Dawn modeled with CATIA V5.
Pre-cut for printing without support or in one piece.
This Milwaukee M18 battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders.
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and box) can be modified in Fusion 360 (f3d file available in the files section). You can increase the “InsertDummies” parameter to add…
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attach a wide filament spool to the side of…
Print it and snap it together Original size for MK3 https://www.printables.com/cs/model/229447-playstation-5-ps5-horizontal-stand 28.12.22 Added No Logo version 27.12.22 Added better joint for snap (preview image is with old joint)
Introducing the indominable Tallneck from Horizon Zero Dawn! This machine is to scale with the official board game and stands on an incredible 150mm base. It has been split into many easily printed parts that come together without any…
Pre-cut for printing without support or in one piece.
Introducing the Sawtooth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Pre-cut for printing without support or in one piece.
Introducing the ultimate hunt, the Slaughterspine from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, easily printed parts that come together without…
I needed to store small hardware, but was limited on vertical space. This design is fully parametric and can be added to any spool based on the height, diameter, and the number of drawers needed. The STL files included are for a 12 drawer…
Introducing the Watcher from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 10mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
VÍDEO DEL PROYECTO:
It's a recreation of a Tenex 300 series tape dispenser. I used a 20mm wide metal tape cutter blade from another old dispenser. The top half can just be pressed on the bottom half and you could fill the holes with sand if you want to make…
Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…
Introducing the Stormbird from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 120mm base. Use with the Stormbird expansion during gameplay for the landed stance. It is broken up into smaller…
after an insightful comment from @Bischi_244918 i've remixed my tape dispenser to fit on a 2x4 Gridfinity grid.
I was unhappy with the available solutions, so I designed a new adapter to attach to the dock. It replaces the backplate of the Dock and clips in. The Dock can be flipped up to access the cable connections. This adapter is useful if you…
Remix of https://www.printables.com/model/137697-ssr-din-rail-mount to mount SSR from Rat Rig kit horizontally.
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
Introducing the Ravager from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base attached. If you have already hunted this machine you…
Simple model I use to test my horizontal expansion settings as used in
Introducing the ultimate hunt, the Slitherfang from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, more easily printed parts that come together…
I designed a dodecahedron with bluntly rounded points extruded from each face using Fusion360. Inspired by the Star Fragment items in Animal Crossing: New Horizons, they look great in a silk or glow-in-the-dark filament! It prints great…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
Make your Switch 2 fit inside your TV rack! A Nintendo Switch 2 horizontal dock stand with anti slide features. The stand gently holds the dock in place, see red arrows on photo. Possibility to add 12 mm rubber legs underneath the stand.…
Precision Horizontal Level Key chain This is a high precision alternative to spirit level. It's small, compact and can be attached to your key chain. The level requires a 7mm steel ball bearing. If you built the Prusa printer yourself,…
An updated side spool holder that I did for the X1. This one is 10mm shorter and the filament feed hole is 20mm lower, making it feed a little easier. Designed to fit the P1P, with a 90-degree mount for the connecting coupling. I printed…
Unleash Your Nintendo Switch 2's Potential with This Horizontal Dock Stand! Just got your brand-new Nintendo Switch 2? Maximize your gaming space and show off that stunning 4K-capable dock with this custom-designed horizontal stand!…
Add the gentle giants from the Forbidden West! This machine is to scale with the official board game and stands on a 80mm base. I printed attached to the base for stability but a detached version is also available. Note that the tail dips…
Introducing the Snapmawfrom Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 80mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
You can use this stand to keep your iPad air 2 at vertical or horizontal as per the pictures.
Horizontal version of Daniel Josvai's tilted display stand for lightsaber hilt at https://www.printables.com/model/15505-tilted-display-stand-for-lightsaber-hilt . The attached photo shows the horizontal stand with Josvai's Obi-Wan Kenobi…
Introducing the Behemoth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 80mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Horizontal Magsafe and AppleWatch Stand This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17. All cable cutouts fit both USB-A and USB-C…
Update : Added a “true scale” version to video game scale and all the other machines here, instead of the official board game's (which is much, much larger). If you aren't trying to match the SFG board game pieces I would recommend…
Introducing the Stalker from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 50mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
Here is one of the first machines we saw in the forbidden west, the Burrower! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece (with the base) for stability. All…
Introducing the Grazer from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 30mm base. It is intended to be printed in one piece with the base attached for stability. All credit for character…
![HP EliteDesk Mini PC to Full Desktop PC adapter [Horizontal and Vertical versions]](https://media.printables.com/media/prints/3938f77b-286d-425e-b26b-7e2489022566/images/9655291_57da1707-0b7c-466d-a02e-1af8e2b8705e_60ac6017-81cd-4759-9bd0-2309be46c674/img_20250502_074848931_hdr.jpg)
