Counting matching models…
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
Made for any normal drill it is plastic so be gentle but it holds up really well in a drill.
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
Schutzhaube Lichtschalter/Heizungsnotschalten gegen ungewolltes betätigen. Innenmaße 75x75x60mm
For my exhaust air heat pump, I have several external wall air diffusers, so-called ALDs, in the shutter box. I designed this component to improve the sound insulation here. A “first element” and several “middle elements” are required.…
It is made to maintain the shutter box from an other project onto a tripod. It is print in place, with supports. It uses an M6 nut (minimal length is 16mm) and a butterfly nut. Pipe / Tube diameter is 28mm.
This is case was designed to embed all the components needed in the making of a camera shutter by @jamesskelton. Link to his github project page : https://github.com/hackaninstant/Servo-Shutter The box embed : two 3,7v lithium battery for…
Didn't see anyone with a poop chute that went around the Qidi Plus 4 yet. So I decided to slap one together. By no means is this one the best design, but maybe it's a good start for someone to remix? It's not perfect and there are…
A simple and minimalistic Christmas hut, it looks good as is, but I've enjoyed more to add some personal touches to it. In the middle there is a socket for a 37mm tealight It is cca 100x150mm and takes about 3.5hours to print with a .6…
I made a little platform for my set up since my printer sits right at the edge of the shelf. Double sided taped it to the shelf since the magnets couldn't hold it in place. Made for this chute…
I made a little platform for my set up since my printer sits right at the edge of the shelf. Double sided taped it to the shelf since the magnets couldn't hold it in place.
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG Befestigung für M5er Schraube, Klemmenabstand ca. 37mm. Kann im Slicer für die individuellen Maße angepasst werden.
Habe die Lamelle für ein kleines Rolltor für den Modellbau verwendet. Gedruckt aus PETG
Are you tired of just handing over a gift card? Make them earn every penny with the "Bolted Shut" Gift Card Trap! This is a heavy-duty prank holder designed to lock a standard gift card behind 20 separate M6 bolts . For an extra layer of…
Update 12/25: I added a threaded version. Use that if you don't trust the press fit between the two parts. The thread is equivalent to an M10 threaded bolt. ---- Update 12/25: Ich habe eine Version mit Gewinde ergänzt. Das Gewinde…
Philips LatteGo Chute Extender Funnel The wife loves to drink her decaffeinated coffee in the afternoon and would ALWAYS spill some coffee grounds around the chute. This extender funnel aims to solve that.
Spare magazine holder for Anschutz,to be printed out of TPU Used velcro to attach it to rifle stock
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This is a 2 part “Shutdown” button. It was designed for a 0.4mm…
2 magnets (max dimension: 15x8mm) are needed to attach it to the back. (I used 15x5mm). This makes it easy to empty the container. Magnet cower should fit snugly. The container has the necessary distance from the wall so that it does not…
A quick redesign of the spike tool for hutikka69 . Included step files in case it needs to be longer. Printed at 0.24mm layer height, 4 walls and 40% infill with a 0.6mm nozzle. Sturdy enough that I Can't really snap it by hand, only…
It fits into a regular 36 mm (OD) waste pipe with an inner diameter of 31.6 mm. Intended for air ventilation purposes, not liquids. I made it a bit loose to ensure it went in without compressing the printed thread. Needed a couple of…
English: I created coasters or protectors for table legs or furniture feet in general. Used here on a pinball machine. The new project will be on my YT channel soon: https://www.youtube.com/@VolkerVolkach I printed it with TPU from…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
Version 6 is printed at a 45 degree angle to allow printing in a single piece.
This is a rear Purge shoot and rear deflector for the K1 Max. This shoot needs modifying of the rear panel in order to use it. I used a 30MM Hole saw to drill the hole where the filament spool goes on the original Panel, Once I drilled…
Elektro Kerzen mit Lithium Akku Typ 21700 für sehr lange Brenndauer bis zu einer woch im stück mit USB 3 Buchse zum wieder aufladen und Schalter.
Kleines Hutschienengehäuse eine USB-A Einbaubuchse und bis zu 6 Reihenklemmen. Außerdem gibt es ein Fach zur Aufnahme kleiner Platinen, wie zum Beispiel einem D1-Mini. Material : PLA, PETG oder ABS. Es wird kein Support benötigt. ----…
Badminton shuttlecock dispenser with top and bottom closure caps 4 M4 x 20 mm countersunk screws + 4 bolts Recycled from an old feather shuttlecock cardboard tube For a 35 mm square post Printed in PETG
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
I wanted to build a poop container for my Centauri but didn't like the idea of having to rebuild something else once the ams came out for it. Since I already had one of the “(The original) Bambu lab segmented poop chute pipe” models on my…
Little temple for hermit crabs for shelter and enrichment. Snack bowl at the top
My Aktuator was form like HM‑LC‑Bl1‑FM HM‑LC‑Bl1PBU‑FM . I needed to replace a DIY Mount on a DinRail
Recently I had published the space shuttle, well now here is the Booster, SRB addon pack for her! This addon pack is only for the space shuttle you can find the shuttle orbiter by clicking here ! You need 6x M3 screws. - 1 X M3 0.8 cm…
Can make out of any filament. To clear the poop, you must remove the entire chute. To do this, simply lift up and pull away. 41048.38896 mm³ No supports needed if you choose that file
1:64 Classic Pizza Hut Diorama glue required easy to assemble can be lit from the inside
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
Disponible avec ou sans rebord ------------------------------------------ Available with or without rim
The hooks on my hutch broke, so I drew up some replacements.
The waste chute is extra long for a waste bin on the left side of the printer. It was designed to be easily installed and removed without needing to fully unscrew it. I have my printer against a wall and the chute going behind a desk, so…
Been working on this for a while on and off, pretty much has been working great for my setup. I had to change the files some to work for the standard bed layout for the 350mm 2.4 since my bed sits lower. Its also made for a 355mm and can…
Hält eine elektrische Sicherung Und schützt sie
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
Carry your smokes and lighter wherever you go! The Space Shuttle conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
This is a full replacement for the stock chute on the Eureka Mignon Specialita. It's a little wider and is less prone to clogging. It also has a built in funnel. There are two versions. One for use with a tilted base (single dosing) and…
You'll see these rising out of the fog: the stilt villages of the Mire pygmies. They look flimsy, like a stiff breeze could knock 'em over. That's what they want you to think. Those stilts keep them high and dry, above the leeches and the…
Rokenbok Half Size Straight Chute Door has been separated for better printing. I got the best results printing the chute standing up (shown in the photo). Model has been improved and updated to v2, I still have some more tweaks to make…
Updated: Added shorter poop bin for X1C with out the riser. Trim the poop slide to give it more range of motion. Remove poop slide adjustable support. Trim the right main unit to add more room for poop slide. THIS ONLY WORKS IF YOUR AMS…
Eine kleine Aufbewahrungsbox für die Kettenverschleißlehre von Optimize um die Lehre und besonders die Stifte auf der Rückseite zu schützen. Gezeichnet mit Freecad.
This is a replacement shutter button for the older form of Primoflex, from Tokyo Kogaku, that has a central shutter lever placed below the taking lens (not the later model with the shutter button on the bottom left when looking at the…
The whole contraption is really messy and the is sketch rather dirty, parts have many artefacts, it could use a lot of refinement but i'm not willing to give it right now. It's not blowing straight and might be slightly rotated. The…
This is a custom back for the HooToo Shuttle HT-UC007 USB hub. The original back had two design flaws: The finish of the plastic part was rubberized. This turns into sticky bubble gum after only a few years. The Ethernet port was designed…
Die Santa-Mütze einfach im Slicer richtig einfärben und den weissen Bereich zusätzlich als "Fuzzy Skin" drucken - das Resultat ist wirklich verblüffend. Einfach zu drucken, ohne Supports. Frohe Weihnachten!
Kleiner Hänger um die kleinen Sterne Ø80 und Ø130mm im Fernster aufzuhängen. Ich habe die beiden Jabel durch das Loch gefädelt und einen einfachen Knoten darüber gemacht. Das Loch ist mit Absicht ein weneig zu klein damit es passend…
🇩🇪 Deutsch Phasenschienen-Berührungsschutz (Schneider kompatibel) Dieser 3D-gedruckte Berührungsschutz für Phasenschienenkontakte wurde für Schneider Electric Phasenschienen entwickelt und kann auch mit baugleichen Phasenschienen anderer…
Fitschenring für Stahltür Innen : 17,50 mm Außen : 25,00 mm Dicke: 1,50 mm 100 % Infill Dicke einfach Skalierbar Info: unter das Kugellager legen
Hailing from the the last episode in the three-part pilot - here's Mirage's parachute! And here's Mirage with his chute; the cords used here are actually 2mm single core paracords. We've also done up a hanger piece which clips onto the…
It is printed in 3 seperate parts. Case and Bottom must be printed in ASA, they are fuse together with a few drops of acetone. I mean a few drops (3-4), it does not take much. The lid can be printed in PETG or ASA, I find tape sticks…
Die Powerstation Ecoflow 3 Delta Plus wird im Original ohne Schutzkappen bzw. Staubschutz oder Abdeckungen geliefert. Aus diesem Grund habe ich für die Ausgänge AC 230V, USB-A, USB-C und Niedervolt (12V) Abdeckungen entworfen. Mein…
Poop chute to go with the poop dumpster I found on here for my 3d printer. You will need slightly longer screws. I use the ones that come in the top glass panel handle. ( I replaced those with longer ones for the mod to prop the top glass…
It mounts a monitor onto an Icon toolbox hutch wall. No rotation or anything fancy, but it works great. Designed after a french cleat, plus I thought it would be nice to have the mount separate as I may design some tool holders that the…
If you print the and don't want to use any glue, you can print my socket. It will just click in. Print it with support and a 0,15 mm layer height. I added the FreeCAD file (it's very amateurish but working for me; I apologize to the…
Imperial Shuttle (Starships Select) Landing Gear Print Instructions Printed at 0.2mm layer height. Needs support on buildplate. Remove the temporary support after printing
Introduction This design offers a completely new large format camera shutter, building further on this previous design. It offers a number of improvements making it a more practical, ergonomical and reliable tool. The most notable…
Hi everyone, If you’ve upgraded to the Creality CFS system , you might have noticed the stock nozzle wiping routine is not using the purge chute nozzle wipe one. I’ve written a custom macro, cfs_nozzle_clear , to make the cleaning process…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
Modification of original ( https://www.makeronline.com/en/model/Anycubic%20Kobra%20S1%20Poop%20Chute%20Slide%20With%20Bin/170136.html ). Widened the bottom section to allow more collection on larger prints. Added a lid. (My cat was…
This is an updated add-on for my K2 Plus Ventilation System, which you can find here: The new Poopchute v2 features a redesigned funnel with a larger opening to reduce the risk of clogging, along with a completely new mounting system for…
Füße für Ivar Regale. Sieht schön aus, schützt je nach Umgebung das Holz. So kannst du das auch bedenkenlos in dein Badezimmer oder feuchten Keller stellen. Easy.
I made a small poop chute box before, but I realised that it would fill up too quickly. Hence, I created this masterpiece. It slides right into the area where a poop chute box would go (that is if you are using the poop chute found…
a poop shute for the Kobra S1 in order to have a poop collection on the side of the machine
I lost the original clearing tool for my snowblower and found the Chute Clearing Tool ver 2 by "kaje". It follows the same design concept and completes the set. The handle has a rough texture for better grip. I hope this is helpful to…
Function ：Guide waste material to slide down from the left side of the printer via the chute. Key Features 1. No original part replacement, easy installation 2. Metal-free, fully 3D-printed 3. Printable with any material 4. Only 51g, easy…
This guard fits over the blades of the Tefal "5-Second Chopper" (900-ml-Version, Model K13204). It covers the sharp edges of the blades. Material: PLA or PETG (PETG is recommended for durability). Layer height: 0.20 mm Infill: 15% – 20%…
I designed this gear to replace the stripped gear for my Ariens snowblower. It needed some minor filing on the teeth of the gear to get it to mesh better with the metal drive gear but all in all is working properly. I printed with PETG 8…
A new 3D figurine generated by AI, a Chibi Jabba The Hutt (Star Wars). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality…
Abdeckung für die Z - Achsenspindel Die Anordnung in der Datei entspricht dem Einbauort Einfache Montage die Abdeckung wird einfach durch die Schraubenköpfe arritiert.
Modification of Wide version ( https://www.printables.com/model/1563709-anycubic-kobra-s1-wide-poop-chute-slide-with-bin-a ). Widened the bottom section to allow more collection on larger prints. Added a lid. (My cat was stealing the poop…
deckel für kronkorkenflaschen (bier, spezi, cola, radler etc.) 1Nutzen: anti insekten und umfallen: dafür draufstecken sodass es fest und dicht sitzt.schützt vor insekten,umfallen, oder ähnlichem. 2anwendung: mit viel kraft draufstecken…
Schutzgehäuse für Aussenteperatursensor Material : PETG (weiß) Größe Aussenmaße ca: Durchmesser 100mm, Höhe: ca: 160mm Hohlraum Innenmaße ca. Durchmesser 56mm, Innenhöhe ca: 145mm zusätzliches Material: 1x Seckskantschraube M6x 25 oder…
This simple yet functional weaving shuttle is designed especially for children's weaving looms. With smooth rounded edges and a lightweight form, it's the ideal tool to introduce young crafters to the basics of weaving and textile work.…
I used Mark Litchfield's poop chute design and designed a holder for the small bin so that it will always sit in the same exact position after every dump. It uses the screws that are already by the side of the frame. No support needed I…
I printed the slide standing up with tree supports on build plate only. So the bottom where filament fall through will be on the build plate and the tree supports will be supporting only the parts where the screws go through. 2. The…
pretty self explanatory. print recommendation in pictures
Features print in place pivot part compliant mechanism to keep the rod in a closed position modular design easy to assemble and disassemble for maintenance Bom m3 heatset inserts (x4) m3 x 8mm bolts (x4) 5mm x 220mm carbon fiber or glass…
Printing tips: Print 2 bodies (the plain is compatible with the outlined) and 2 shutters. Use holographic plates to give it a nice, extra touch (check the last cover photo for example). Optionally engrave it with a text in the slicer…
Zubehör zum Notfallstempel für die Harzerwandernadel .
Lomo 38mm lens(from LCA120&instant glass) to No.0 shutter conversion
# 🇩🇪 Geometrische Licht-Kollektion Eine Serie von Lampenschirmen mit unterschiedlichen geometrischen Topologien. Optimiert für den FDM-Druck ohne Stützstruktur. ### Die Varianten * Honeycomb: Hexagonale Wabenstruktur. Maximale…
Schlichter Buchecken-Protektor zum Schutz von Buch- und Heftseiten. Wird einfach auf die Ecke geklebt und verhindert Knicke und Abnutzung. Ideal für Schule, Büro und unterwegs.
I added some supports and printed it with TPU.
habe diese U-Schiene konstruiert, um den Gaskasten beim Flaschenwechsel zu schützen, und man nicht die schwere Flasche über die Holzkante ziehen muss.
Poops chute deflector for BambuLab A1 Mini in 2 Parts
Description: Everything I printed on my AD5M Pro, using a 0.4mm nozzle. The riser was made with PETG, just to match the enclosure, but can easily be made with PLA. The 3mf file is set up for my AD5M Pro, with eSun PETG-HS. The chute was…
I was having a lot of trouble getting supports to adhere when trying to print @MikeyLew32's poop chute. In a bout of frustration, I realized that a single change almost completely removes the need for supports, and it still prints in one…
GeoCaching 830: Transport / Schutzkappe für Angel-Elemente Kompatibel mit 10Meter Angel von Geo-Versand ( Modell 2025 ) - Transport / Schutzkappe bei Verwendung der 810 - Angel-Adapter - Zur sicheren Entnahme der Angel-Elemente 821 / 822…
I modified Torstens lamp shade to fit my modified illumination spike
