275 models
I divided it into two parts for better printing, if you have trouble with the overhangs. You'll need a lot of power to get through: https://www.thingiverse.com/thing:4800097 helps, normal gauss won't work Video:…
Snuff box with build in catapult. New Version with a dent, for a more easy lever movement (only visible on the renderings, not the real photos). I prited it in PLA with a 0.35mm nozzle, 0.20mm layer height and a honeycomb infill of 0,20.…
Type: Vekoma Scale: 1:32 Size: ~ 56 cm x 32 cm x 18 cm Printer: Original Prusa i3 MK3S+ Settings: 0.2 mm / 30% Filament: 259 g ( Footers: 46 g, Supports: 67 g, Track: 146 g) Print Time: 32:53 h ( Footers: 4:30 h, S upports: 8:08 h, Track:…
I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…
Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…
A strange tree growing in difficult terrain like rocky deserts or alien jungles. Its most prominent feature is the (one) huge (sail like) leaf. Prints fine without support. Hope you like it. Have fun! -- Another plant for tabletop gaming…
Wine corkscrew with stop to prevent it from coming out on the other side of the cork. Do not use until print is cold. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Resolution: 0,2 Infill: 100 Filament: . PLA . Category:…
Backscratcher inspired by the facehuggers from the Alien movies. I printed it using soluble supports since it's relatively thin.
Ein funktionierender Schaltschrankschlüssen in Originalgröße.
This spiral pencil fits into the corkscrew on a Swiss Army Knife. A standard 0.7mm piece of pencil lead (there is now also a 2mm one) is inserted into a small, slotted hole in the pointy end. While not very big, the spiralized surface…
This cable mounting-clip has been designed as an alternative to the expansive ISO equivalents available in all the hardware stores. It contains of two parts: The Base (12x23cm): The inner width of 8x16mm is suitable for most screws. The…
After Mr. Fehse stopped producing his parking disc , I printed one for myself. I have omitted the suction cups. There are now 2 mounting holes for the padlock (attach to the mirror) and they are further from the edge, therefore more…
It's about 6 inches collapsed and a foot expanded. The layers can fuse at the z seam, so you'll need to minimize stringing. Enabling coasting in Cura helps. I've included a separator in case you have any trouble.
Pick your favorite style of propeller and size, and then enjoy launching them using the power of a corkscrew drive - either across the room indoors, or high into the sky outside! An easy print that requires no supports or brim, and the…
This is for an airsoft model and will literally not work on the real thing, which has a totally different mounting system, don't waste your time. This is a quick and dirty buttstock rail adapter for the KWA/KSC VZ61 GBB/GBBR Airsoft Toy.…
Based on Sound-Maker's idea for a 13mm/ 1/2", I designed a Gardena anti bend nut to prevent the hose from bending for the 19mm/ 3/4"system. Also you can find my 13mm / 1/2 " version here:…
An Oscar with the Rocks head.
Simply screw onto corkscrew to attach.
(NOW with added "EZ Print" STL to print as one part) This isn't the first design for an MMCX connector to be added to KSC75, but this is the best design for an MMCX connector for the KSC75. I designed this specifically because of my…
[UPDATE] OpenSCAD 2019-05 has added native SVG support. I will continue to maintain this extension, but it's now a very low priority. https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/SVG_Import This InkScape extension (plugin) can be…
For Ninebot Es1 Es2 Es3 Es4 kickscooters.
Parkscheibe zum selbst ausdrucken. Ich habe es so angelegt das der Text unten auf der Platte gedruckt wird, somit hat die ganze Parkuhr eine schöne Oberfläche. Gedruckt auf einem Bambulab X1C mit AMS
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
Beschreibung Die 3D-gedruckte Parkscheibe für das Auto besteht aus drei Teilen und verwendet hitzebeständiges Druckmaterial wie PETG, um den Bedingungen im Auto standzuhalten. Teil 1: Boden (Blau und Weiß) Material: Hitzebeständiges PETG…
Die Größe wird durch das Band, das durch den Stecker gezogen wird, bestimmt.
Ich war es leid immer die Trinkblasen nach einer Mountainbike Tour reinigen zu müssen, also entschied ich mich einen Adapter zu kreieren. Nach dem drucken muss ein Schlauch an der Innenseite (Schraubseite) angebracht werden, welcher bis…
Korean Hyojason backscratcher Category: Household
New (July 2026) : Reworked the sliders to fit and slide more smoothly. ------------------------------ This is a headband, inspired by Sennheiser PX100, can be folded and size adjusted. It's designed primarily for KSC75 but can be used…
Für die Solaranlage, damit bei Pumpen-Stopp nicht das ganze Wasser aus den Solarmatten ausläuft. For the solar system, so that when the pump stops, all the water does not run out of the solar mats.
If someone could manage to make this stronger, my pin keeps breaking.
Eine Halterung für eine elektronische Parkscheibe (Park lite). Parkscheibe, siehe z.b. hier:…
This is a remix of fortinmike's remix to allow the headphones to mount the BoboVR M2 and M2 Pro halo straps. Unlike other designs, this headphone mount attaches to the headset by replacing the centre circular cap at the pivot point of the…
um bei eine MC7 von Husquarna die Pedale abzubauen benötige ich ein kleinen schlüssel um diese Plastic spacer zu entfernen. da ich nicht weis wie dieser heisst und auch im netzt nix finden konnte musste ich mir selbst was basteln…
Yaxi S-Cushion: https://www.amazon.com/gp/product/B089SST2YM/ Geekria Pads: https://www.amazon.com/gp/product/B0155XZJ4I/ Installation is as easy as pressing the KSC into place but does require a headband as the ear clips will not fit…
Other designs didn't really fit the bill. One limited the tilt of the driver, the other seems very bulky. I designed this myself in Fusion and it seems to work perfectly. I regained the tilt and it covers the solder area of the driver…
A pistachio bowl with a lid and a tray that holds six pistachio openers. Available with German, Englisch or without lettering. The pistachio openers are these ones: https://www.thingiverse.com/thing:4792654…
13 mm Steckschlüssel mit Antrieb für eine ¼" Ratsche Der Steckschlüssel ist für besonders enge Umgebungen. Der Außendurchmesser des Steckschlüssel beträgt nur 17,2 mm. Im Vergleich zu einem Steckschlüssel aus Metall ist dieser aber nur…
Moving the taillight. a closed mud wing.
Der seitliche Befestigungsclip der Abstützung war leider gebrochen, ich habe es als Ersatzteil nachgebaut. The clip of the side Loop Support was broken, with the modell its easy to replace it.
Ich habe keinen Platz gefunden um meine Druckluftwerkzeuge und Steckschlüssel für den Reifenwechsel zu platzieren. Hab durch paar Inspirationen dieses hier selbst designt und gedruckt. Ich habe es aus PETG gedruckt und alles passt perfekt…
Wenn man die Kartusche im Einhebelmischer austauschen möchte, ist ein normaler Steckschlüssel leider nicht zu gebrauchen. Das Werkzeug aus dem 3D-Druck reicht, um die die Mutter mit der Hand zu lösen und wieder anzuziehen.
English This 1U panel serves as a robust cable pass-through for 10" server racks. Designed for compact network environments, it allows for clean and flexible cable routing while maintaining a professional look. Fully compatible with rack…
A simple backscratcher to be assembled with a wooden rod (10x10 mm, lenght as you prefer) and a round magnet (10x3 mm) Print Settings Printer Brand: XYZprinting Printer: da Vinci 1.0 Pro 3in1 **Resolution:** 0.3 Infill: 20% **Filament:**…
This is a modification of https://www.printables.com/model/705535-vr-koss-porta-mount-quest-3 of the vr_koss_mount part to allow it to accept the Koss KSC 75 headphones as well as increase the strength. In addition I reworked the MK2…
German Mit diesem Parkscheibenhalter kann die Parkscheibe Typ “Park Lite” leicht zum Batteriewechsel oder zur Verwendung in einem anderen Auto entnommen werden. Dies kann auch in verschiedenen Ländern (z. B. Österreich) erforderlich sein,…
Ich habe meinen alten Steckschlüssel- und Druckluftwerkzeughalter um einen Drehmomentschlüsselhalter erweitert da dieser einfach rumlag. Dieser ist genauso aus PETG. Druckeigenschaften: Schichthöhe: 0,20 mm Wand Lienen: 3 Füllung: 25%…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker BackScratcher/Hand Massager. The rod will fit on a Prusa…
Remix of the Universal Mounts for socket ratchets including sockets. Steckschlüssel-Ratsche + Steckschlüssel Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3DJake PETG…
I created this adaptor plate because I wanted a cup holder on my electric scooter. There was a lot of options for bicycles (even a standard mounting system) but nothing for a scooter. This adaptor plate bolts onto the steering stem of the…
Eine Halterung für die OptiGrill Backschale, um diese platzsparend unter Regalböden zu montieren. Schraubenempfehlung: 4,5x35 A holder for the OptiGrill baking tray so that it can be mounted under shelves to save space. Screw…
Hecklader für alle Siku Farmer Fahrzeuge in Maßstab 1/32 Rear loader for all Siku Farmer vehicles in 1/32 scale Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20 Filament: 0.75 PLA…
Need supports Lay face down. Large one works better.
yep the quick release buckle from the deuter schmusebär backpack got lost. the orderable replacement part does't have the right color anyway. so I designed it by my own and print it okay it snaps not so slightly like the original but it…
Adapter to put a BOSCH A 332 H flatblade wiper on my OPEL ASTRA J OPC. Prusament PC Carbon (fits best in color) / PC / PETG / ASA needs only a small support structure under the connection part to the arm.
Hand-Eckschleifer für zwei Delta-Schleifpapiere (Dreieck-Sandschleifpapier) Passend für Schleifpapier der Größe 80x80x80. Für andere Größen kann das Modell skaliert werden. Zwei Versionen: v3 - mit kleinem Griff (nur für leichte Arbeiten…
I printed the model that won the “backscratcher contest”: I liked it's look, it’s a really fun design, but it isnt a really good enough back scratcher for me. So i made my dream backscratcher. Let me know what you think! Print with 0.4…
I got requests to made a 0.78mm version of the same design, so here you go. It's tested and works well. Check out this flower grill: Make I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design…
Eine deutsche Parkscheibe mit drehbarem Ziffernblatt. Druckanleitung: Bitte unbedingt in temperaturbeständigem Material drucken (PETG oder besser) Nozzle 0.4mm für gute Auflösung der Schrift Keine Supports Farbwechsel mit kontrastreichen…
This is a remix by Altay Özsoy on Thingiverse . Added another slot for a nut and air tool and another 2 holes for wall mounting. My Print Settings: Rafts: NO Supports: NO Nozzle: 0.6 Resolution: 0.28 Infill: 25% Walls: 3 Material: Esun…
Remix of the Universal Mounts for socket ratchet sockets. Steckschlüssel Category: Tool Holders & Boxes
Hallo, ich habe zum Schutz vor Scharfen Ecken und Kanten einen Schutz gezeichnet der einfach mit Doppelseitigem Klebeband angebracht werden kann. Ich empfehle ihn mit TPU zu Drucken 2-3 Wände 5% Infill. Hello, I have drawn a protection…
This uses 3 standard-sized pan-head (pocket) screws, one for the lever/arm fulcrum, and 2 more for mounting the brace/block. The ‘open’ area between the 4mm (thin) side of the corkscrew and the handle is to allow the mounted object to fit…
Moderner Lokschuppen für Schiebebühne – Spur Z (1:220) Erweitere dein Bahnbetriebswerk um ein architektonisches Highlight! Dieser detaillierte Lokschuppen wurde speziell für die Kombination mit der Märklin Schiebebühne (Spur Z)…
https://www.target.com/p/oxo-softworks-corkscrew/-/A-13567840?ref=tgt_adv_xsp&AFID=google&fndsrc=tmnv&DFA=71700000106731
WARNING: this model can and probably will scratch up your scales Print out of PETG or a stronger material for best results. Infill 100% or print with 8-12 walls.WARNING: this model can and probably will scratch up your scales Print out of…
Unleash your inner undead with this terrifying yet practical Zombie Hand Backscratcher! This detailed 3D model features a grotesque, decaying zombie hand, complete with gnarled fingers and eerie, realistic textures. Perfect for those who…
Umbrella Corkscrew mount for the sand 250mm in length, 40mm x 30mm insert shaft for the pole with x2 bolt holes. I printed mine in PTEG Pro with a .04mm nozzle, it has worked very well for me so far.
Hello volks this is my keychain for quick access to switch cabinets! Printed in : PETG-CF for high strengh and an 35° angle to increase strengh against roatational forces while making sure it still can be printed with an overhang Needs…
My back was itchy, saw the contest page, was making shish kabobs... poof! Idea! This fits onto a 4.2mm wooden skewer. I was making shish kabobs, it's what I had. it's not big but scalable if you have a larger rod to use. I was able to…
Schraubbare Rucksackschnalle für flexible Gurtbefestigung Diese Rucksackschnalle bietet eine unkomplizierte und elegante Lösung zur Befestigung von Gurten an Rucksäcken, Taschen und ähnlichen Anwendungen. Sie zeichnet sich durch…
EN: This was another back scratcher I really liked. Apparently, the creator’s account, “Cabbage63,” has been deleted, and despite an extensive cross-platform search, I was unable to find any relevant uploads. However, it broke one day…
This is a replacement part for the clips used on Vaude rolltop bicycle bags
Eckschutz, Stoßschutz für Tische oder etwas anderes mit Ecken. Schützt eure Kinder vor Verletzungen. Ich habe es aus TPU gedruckt mit 10% infill damit es etwas weich bleibt.
Dies ist ein einfacher Halter für die elektronische Parkscheiben EP-1 von Aldi (gibt es aber auch von anderen Anbietern) Hiermit soll der Austausch der Batterie bzw. zwischen anderen Autos erleichtert werden. Getestet (VW Lupo, Golf7 Audi…
Druckmaterialien: Abdeckung: FilaFlex 40 von Filatech Stößel: Prusa PETG Material entfernen Dateien drucken Stößel einsetzen Kleben |
In case you don't have anything to open your favorite wine with...
A remix of the rugged box to carry my KSC75's in a bag.
For Pico 4 vr headset- edit, also fit Pico 4 Ultra Simple to print and simple to mount lightweight solution for koss porta pro and koss ksc75 headphones onto the Pico 4 or Pico 4 Ultra Total weight with speakers and all the wire 40 grams!…
A version of the 91mm Plus scales for those that remove the corkscrew or phillips driver from their Swiss Army knife. This scale allows customs modifications to your knife while still maintaining its cosmetic looks. Unfortunately you will…
This is for use with a user supplied Dowel. There's a spreadsheet, and you can change dowel_dia to suit. I made the hole an oval as vertical surface holes are often squished. I also projected the connector into a separate body that should…
I couldn't find anything that I liked and wanted to make something that is easy to slip in and out. The Koss KSC75 ear clips slide into the center and the cable wraps around and locks in place. No infill and supports needed. 2 walls on a…
Printing Tips: use 0.1 layer height for a tighter fit on the mounting bracket use tree supports to for the back cutout only
17 mm Steckschlüssel mit Antrieb für eine ¼" Ratsche Der Steckschlüssel ist für besonders enge Umgebungen. Der Außendurchmesser des Steckschlüssel beträgt nur 22,4 mm. Im Vergleich zu einem Steckschlüssel aus Metall ist dieser aber nur…
This is a model of this part (Part 37) but specifically only the rubber piece that breaks/dries out frequently. Credit for this model is hard to pin down, but this was shared on the HRC Discord by user:sindrathion - No one is taking…
Glücksklee +1 Glückscent Lucky clover +1 lucky cent
A set of watch hands in the style, that is typically found on a "Schwarzwälder Lackschild-Uhr" (https://de.wikipedia.org/wiki/Lackschild-Uhr). The minute hand is ~108 mm long, the hour hand is ~82 mm long. The mounting holes are 2.2 x 2.2…
Softer scratchy-thingy so this is a bit more gentle on the skin than other backscratchers. Posted as a remix as mine is super heavily influenced by https://www.printables.com/model/425215-back-scratcher Which is a superb backscratcher!…
Ever had those annoying itches on your back that you just can't reach? Stop bending like a shrimp to reach them, because the solution is at your fingertips! Literally. Just your plain ol' backscratcher but pocket size and very convenient…
This is a very simple and robust mount to fit a pair of KOSS KSC75 directly onto the side of the Meta Quest 3. Made to be 3d-printed easily and quickly using only about 22g of PLA in total. The main “Mount” parts just fit onto the side…
Back at again with another Team Fortress 2 prop! This time its the bawdy shaped Backscatter. The Backscatter is around ~60cm long, it features a trigger with printed spring and a lever action. (Sorry A1-Mini users, i couldnt make it fit…
KSC Schlüsselanhänger sehr simpel sehr schnell zu drucken ca. 4min
for KTM and other brands from KTM-Group to cover the steering lock to protect from dust, water and impact and damage use TPU for the part and it will keep in place properly
Mashup of the hand by Daniel K. Schneider http://www.thingiverse.com/thing:2608 I printed mine in Nylon (Taulman 618) to test this material, but it would print fine in any high strength material like PET-G.
Schlüssel zum öffnen von klassischen Schaltschränken, mit praktischem Loch zur Befestigung am Schlüsselbund. Gedruck mit PLA, 4 Wände, 20 % Infill Kreuzschraffur
A holder for this kind of lock. Warning! Slide-on design! You have to disassemble your scooters handlebar, reflector and brake line!
Da ich öfters mit wechselnden Autos unterwegs bin, habe ich diesen Halter entworfen, um die Parkuhr "Park Mini" ohne Klebepads im Auto befestigen zu können und dementsprechend ohne Klebereste wieder entfernen zu können. Ist der Saugnapf…
Zur Reinigung tausche ich ab und an die Tropfer des Gardena Micro-Drip-Systems aus. Dieses Werkzeug ist dabei sehr hilfreich. Die Schlüsselweite beträgt 8,2 mm. Translation: DeepL I occasionally replace the Gardena Micro-Drip system…
![[MMCX] Improved Koss KSC75 MMCX mod](https://media.printables.com/media/prints/69e46b2b-e1eb-40ae-9e22-379bf2e74f6e/images/12578853_2e9f5ee6-fe8c-4dc7-bd93-babc4ec3e03c_948f08cd-5a44-46bb-b65c-3639b9c6ffd4/pxl_20260408_103300559.jpg)
![[2-PIN] Improved Koss KSC75 2-PIN mod](https://media.printables.com/media/prints/7c5e8aaf-03c0-4e78-9ec3-4660cd149193/images/12857778_a0ae66dc-9fff-451f-832f-40b84bfd7ee3_0a8be31d-eb65-452f-bec8-bb1fae60cfcf/pxl_20260507_050824097.jpg)
![KOSS KSC75 Mount for Meta Quest 3 [Parametric]](https://media.printables.com/media/prints/915612/images/6992485_b6e60ffd-5eb2-45e8-a3f2-14f7067214f8_01b6ae11-af24-4303-87d8-09498f6ff2a7/20240617_210112.jpg)
