174 models
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
A basic yet functional case for a power supply module. It can be easily printed. Similar modules should be compatible with them too, but I have tested only this one. To assemble the case, you need a drop or two of glue. You may need to…
Print approx. €4.96–€6.06 excl. taxPreliminary estimate for one variant
I wanted a better knob for the KX2, but one that was also still the same size to fit in small cases and to work well with after-market radio covers. The finger indent allows quick tuning and efficient spinning of the dial with no added…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the Iambic Paddle designed by Adam Kimmerly (K6ARK). I really liked his design an thought it would pair well with the ultra portable Elecraft KX2 HF Transceiver. I also wanted to help put out a design that lowers the…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
I lost my washers so i make new one. 100% infill There are 2 files 1 for flat screws and the other 1 is countersunk update 2023-09-01. Its working well on my bike, no problem at all, it can replace the steel one if you loose it.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Carlo Cokxxx N*utten Logo von Bushido und Fler
Print approx. €7.54–€9.22 excl. taxPreliminary estimate for one variant
Wrapping the 8mm extruder sleeve on my MK4S was already painful but the nervous breakdown came with the 5mm sleeve on the heatbed cables, hence a tool. How it works : (Photo 2) The cables are inserted in the central channel and the sleeve…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Congratulations, You are being rescued Its time to re-live the Ghorman massacre and the Scarif vault with your own KX unit! The model uses Dummy 13 by @Soozafone as the base The frame was rounded and split up for the extremities to give…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Bill 'o Materials: 📦…
This enclosure is for Arduino RAMPS electronics . It is suitable for Prusa i3 frame (MK2/MK2s/MK2.5/MK3) and for Prusa Bear Upgrade (from Grégoire Saunier - check his amazing work). I have modified the Original Prusa base and lid (…
NOT FOR PROFIT. PERSONAL USE ONLY!!! Full size wearable mask from the game (undamaged)! I smoothed out the mkx mask from the game and added in 11/32" sized vent holes and even added 3/16" holes for the rivets! thickness is 3/32" SCALE IS…
UPDATE - Also fits Well Pro AK12 . Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some…
BASIC MODEL: ZK-4KX Buck Boost Converter
This is a portable power supply based on ZK-5KX buck-boost module from Aliexpress. It can be powered from different sources: XT60 connector usb type-c connector banana plugs It has an integrated clamp for XT60 male connector. Prints…
Mini DC power supply Based on ZK-4KX DC to DC Buck Boost Converter Input: 5-30V Output: 0,5-30V; 4A Necessary parts: Its based on ZK-4KX DC DC Buck Boost Converter, that you can get for around 10€ from Aliexpress . For the banana plugs…
YOU CAN DOWNLOAD THE MODEL ON : https://www.crealitycloud.com/model-detail/top-mount-cfs-lite-for-sparkx-i7-with-spool-holder-mount?source=22 This is a Remix of the V2 Made By MC 3D Design , i remake everything from scratch, but i keep…
Simple enclosure for ZK-4KX or XK-4KX buck/boost DC-DC converter. A lot of big vent holes from all sides for better cooling. Wires can be mounted and dismounted without removing the device out of the case. An additional external fan is…
This is designed to work with the ZK-4KX , but will likely work with many similar products like the ZK-SMC01 Stepper Driver with a few mods. ZK-4KX Buck Boost Converter Panel/Lid 2x2x5 Gridfinity Container with ventilation Hexagons are…
Protects top of radio, display, and knobs from damage. Remove existing side panels by taking out screws and nut securing microphone connector. I printed these in PETG.
Parkside Team X20V battery socket with ZK-5KX - CC CV 0.6-36V 5A boost converter, QC4.0 USB A/C charger and XT60 battery socket. USB charger and XT60 socket case is optional. Used boost converter:…
Brake hose holder for Kawasaki KXF
I have started flying the F/A-18 in DCS World and was giving thought to building out an upfront controller panel when I remembered I had a Streamdeck sitting around from a previous project. This is a simple case to mount a Streamdeck XL…
PUKX 25 (/pʌks/) is a low-profile cable grommet designed for cables up to 6 mm in diameter. It installs in a 25 mm (roughly 1 inch) through-hole. The concept evolved from my Generic Studio Arm Mounting Grommet ,. This all-new design…
The Comandante C40 is known to struggle with getting the right grind setting for espresso, so I first went out and got myself the Red Clix set - which definitely improved my experience making coffee but I still felt like I was sometimes…
Milwaukee M12 Battery Power Supply ZK-4KX 35W MODULE CASE TOOLS / HARDWARE NEEDED ------------------------------------------ 1X ZK-4KX BUCK BOOST CONVERTER (35W) 2X 14/16AWG FLAG TERMINALS 2X 24mm - 1/4" Male Spade Crimp Terminals 6.3mm…
Designed some taller case feet for Mini ITX cases, specifically the KXORS S300 and S400 to help with bottom air intake. Original feet are 10mm tall, so I created 20mm and 30mm variants. The 20mm variant height is approximate. The hole…
About This is the first draft of a stationary or portable stand for a stack of Elecraft KX3 radio and Elecraft PX3 panadapter. The radio and the panadapter are stacked on each other, steeply raked, to create a compact and comfortable…
This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…
Case for a ZK-4KX Buck Boost Converter Power Supply The power supply slides in to the case and stays in with some friction. The wiring terminals remain open. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
This is a Tuna Type Shroud I designed and made similar to the Dragon Shroud being sold online. Print this with some supports, if you can break it up and avoid it in the corners it can be easier to remove. It is designed with some 45…
During assembly, its the easiest to first install the banana jacks and put the cables on them. Insert the cables into the ZK-4KX before putting it into the print. It is quite hard to insert the wires, when it is in the 3D print, but you…
Специально разработанная модель корзинки для мусора сопла при печати на 3D принтере SPARKX i7 by Creality. Размеры сняты непосредственно с самого принтера. Идеальная корзинка для отлавливания всех остатков пластика с сопла: зона прямо под…
Tired of the stock barrel on your Zius BK1S/BK2S? don't have a 13.4mm chambered barrel? Well, this may help. If you do need this, the tolerances are pretty tight, i've shared 2 unthreaded variants below depending what tolerances you get…
This is a 3D printable case for the ZK-12KX Step-Down Converter. It is to be used instead of the acrylic that is supplied with the board. The Step-Down converter is typically used for DC-DC battery charging and it supports both constant…
A simple bench power supply case. It's powered from the wall power outlet, and can manage maximum of 30V, 4A or 50W, whatever comes first. I supplied links to necessary electronics parts below. I printed my case in gray ASA - if you want…
Prints in place without supports. The left-right fit could be a little tighter, however it does not fall out. Rubber Feet could help against sliding, as well as some weight in the back. you could glue in some old washers or other stuff.
If you want to use Li-ion 18650 battery (like original KXBT2) internal in your Elecraft KX3 instead of NiMH batteries, you will need this new holder and retainer. Material PETG or better Layer height ≤0,2 mm Infill 100% Support None. The…
Using a PDC004 usb c 20v decoy board. Either glue the usb c board or secure it with a 2x6mm screw (2M) and nut. Onshape link:…
Portable and lightweight DIY power supply with 5-30V input and 0.5-30V, 4A output. Parts to buy. ZK-4KX (XK-4KX) Buck-Boost converter (71.6/75x39.3 mm hole). Switches 250V, 6A, for 19.1x12.1 mm holes - x2. Banana Plug Socket for max. D6.3…
there are 2 editions the HV version got a hole in the grip. this way you only have to loosen it a little and place your finger inside the original grip. to turn in lose in other words you only need to print the HV version when you have a…
Lynx but modified to take FNK's rock and lock double stack ninja mags. Make sure you leave the tensioner in the position shown to allow the ram to clear the mag. Hardware Additions/Modifications: longer takedown pins…
This is a stand for the Elecraft KX3 and KX2. The smaller stand is designed for the matching Panadapter. The stand can be used for other devices like HT radios. You will need to duplicate the number of parts needed for each project. Print…
This is a set of magnetically attached covers for the Elecraft KX3 and PX3. These require common 6mm diameter by 2mm depth magnets. Designed in OpenSCAD. Since all KX3s and PX3s are hand assembled, I recommend trying the test print option…
Prusa MKxx Spool Holder with Single 608 Bearing My MK4S came with a spoolholder. The spools do not run smoothly on them. Especially when printing TPU (which the MK4S' nextruder is terrible at) requires as little friction as possible. I…
Update (03 Jan 2019): Version 2 added. More ergonomic, more beautiful, more balanced! After buying my Panasonic KX-TG6811 DECT phone it turned out that its handset cannot stand on flat surfaces on its own like my old Panasonic phone did.…
Enclosure for ZK-4KX buck converter/power supply. vented and non-vented enclosure. faceplate configured to use ring term
Had some trouble figuring out what parts would fit my aluminum prusa frame so I upload here with all the parts needed and clarifying what you should print: If you have bear profiles use original version, from there v2 has removed support…
I'm not a professional so don't judge me harshly) The holes for air and for the bolt I think it would be better to make a bit bigger. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE Rafts: No Supports: No Infill: 30%…
I have created a small portable knee board for the elecraft kx2. You will need a strap of some kind 1"½ wide . 2.5mm elastic shock cord and a large fender washer. I recommend sizing the fender washer to fit after printing the board. When…
Elecraft KX2 VFO knob Recommended 100% fill no supports needed. I used ASA but petg would also be fine.
Beschreibung The Original VFO Knob of the KX2 does Not feel good when you try to Spin to a new frequency. This remix of my QMX VFO Knob is a bit bigger to use the available space at the Front of the KX2 and contains a dimple for your…
This is a stand I designed for the Elecraft KX3 and PX3. You will need to print two of both STL files to make the stand. I forgot to add the cross brace for the bottom and back. My QRP Club the North Georgia QRP Club offers a very nice…
This is retro style enclosure for XK-4KX buck boost converter. For power supply you can use 12 or 24V max 4A power supply if you going to use the same USB ports. If you want to use different USB port you need to double check correct…
Español: Esta es una carcasa para la fuente de poder ZK-4KX pensada para ser alimentada por medio de USB-C por medio de un múdulo Power Delivery breakout board. English: This is a case for ZK-4KX designed to be powered by USB-C using a…
Used a person that had the TriForce, but designed it with thin walls where it connects to the extruder gear. Hard to print even with a layer height of .08. Found another design that had a different connection styler from H ackman3D and…
Gridfinity nozzle holder bin, for a set of Creality SparkX i7 nozzles. This is the nozzle shape from the Single Nozzle Holder 1x2 bin (blown to 110% for wider tolerance), boolean'd off a parametric 4x2x4 stackable parametric blank bin…
January 7, 2024: Added some more performance data to the bottom of the original blog post on what happens with key down.. https://holdmybeer.io/2023/12/22/ham-stack-fan-shroud-for-elecraft-kxpa100/ January 4, 2024: I recorded a timelapse…
This model is a remix of the Gridfinity Mini Lab Power Supply designed by 72pxldotcom. I remixed this great design to fit the ZX-5KX Buck Booster. The ZX-5KX has a fan and needs a deeper container. I also added text of the suggested…
An easy and nice way of hanging your AKX/AKM on the IKEA Skadis board.
Chassis kit to fix the shortcomings of the long flat skid on the FX118. This has a 10-degree skid and shortened the frame's bottom rail (battery relocated to slider). I ended up with an ESC above the transmission and the rx on the slider…
DC-DC ZK-12KX 12An DIN rail mount Board revisions may vary! Mounting holes 75x45 mm Compatibility: DC-DC ZK-12KX 12A 35mm DIN rail Mounting components: M3 screws M3 stand
Front and back parts glued to the bottom. Cover fixed by TEX. Fan 40mm. Created in Solidworks for makers. Feel free to use it or modify.
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports Only…
The STP model of the PImax 8KX (frontcover, half) to allow for modding or re-printing parts.
BKX-7X Battle Axe BN Edition for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Remix to accommodate the components I wanted to have on my portable power station: ZK-4KX variable power supply buck-boost converter XT-60 panel mounted connector as main power interface (still on mail order thus for now cable coming…
The "Thrifty" KX3 Desk Stand is a simple, functional desk stand designed specifically for the Elecraft KX3 transceiver. The design supports the KX3 using its built-in rear legs. This model was created as a practical replacement for a…
Here's a push-on front panel cover for the Elecraft KX2. It's meant to be pushed onto the front face of the radio and provide some protection to the knobs and display from damage if your bag gets knocked or you fall on it. Print Settings…
A stand for mounting an Elecraft KX3 on a shelf. The SCAD design can be adapted for a KX2 or any rectangular device. 73 KD8CGH Print Settings Printer Brand: Prusa Printer: i3 MK3 Resolution: optimal .15 mm Infill: 25% Category: Electronics
Fairly simple make I did to learn YAPP I printed in ABS, should have used Brim for lid. USB https://www.aliexpress.us/item/3256805999439786.html
A variable length spiral leg that allows stepless adjustment of the Elecraft KX2 radio's tilt angle. Folds back behind the radio for transportation. Replaces the default fixed single length tilt leg using the same thumb screw. What…
This is a stand I designed for the Elecraft KX3 and PX3 using Fushion 360. You will need to print two of each STL files to make the stand. I forgot to add the cross brace for the bottom and the back. My QRP Club the North Georgia QRP Club…
I revised my EOS2 whoop camera mount to now be able to mount the AKK KX5 VTX inside the canopy with cutouts for the channel button and the display. Print at 0.1mm and with support especially if using TPU and you want the top to turn out…
The original model requires to pause the print and position some M3 nuts. This is a remix of the base with enough room for for M3 Ruthex inserts.
Pictured in Bambu Lab TPU 95A HF; also tested in PLA. Should print fine in other materials but may require adjustment or drilling if the holes in the 4-pin connector come out too small. Three options for the “KEY2” legend: none: flat…
Reduce printer poop/purge on the Sparkx i7 !! Use this preconfigured 3mf file to calibrate the flush needed for color changes on your sparkx i7. On the calibration print, find the value that you are satisfied with and use it in the…
Print in petg 40% infill Skyddar kopplingsarmen vid motorn från smuts Protects the clutch arm from dirt
Covering for magnetic pogo pin useable on the earthconnection on your Elecraft KX2 Material TPU Layer height ≤0,2 mm Infill 100% or Walls 10 Support None. The model was designed not to require any support material. pogo pin…
bague pour remplacer celle d'origine à imprimer en TPU A95
This remix is designed to allow the Elecraft KX2 to retain the rear leg (in fact I use the taller leg ) at the expense of space for the KXPD2 (which I don't own). I use the space in front of the radio to store my AX1 with AXE1 and AXB1.…
Design Concept The i7 SPARKX Nozzle Holder is inspired by iconic Pac-Man visuals, integrating a playful design with practical functionality. Usage This holder is designed to organize and store multiple nozzles securely, keeping them…
KX2 POTA Mobile Cup Holder Mount (Low-Cost Alternative) This is my redesigned version of Mike Roberge’s excellent KX2 Lido Car Mount Bracket: https://www.printables.com/model/1451261-kx2-lido-car-mount-bracket . The goal of this build was…
This will allow you to have some guide for your mock piston so that it will seat properly at the end of the cycle. This is great in the case you dont want to run a gas tube but still want to ensure your model cycles correctly. This will…
Wall holder for DECT coldress phone Panasonic KX-TG6821. STEP file included. Designed for line width 0.5mm (holder's walls width is 2mm, so 4 lines in wall). Infill does not really matter as it is only somewhere in the bottom. OrcaSlicer…
A sunscreen for the KX3 that attaches to the side rails and folds down to protect the display and controls. Designed in OpenSCAD. I printed mine in PETG. Print top and 2 side pieces and put together using 2 M3x8 self tapping screws. Shade…
"Anti klapper" Hörmuschel für Panasonic KX-TGA651EX ist für Hörgeräteträger entwickelt die akustisch durch den mechanischen Kontakt des Telefons am Hörgerät und den daraus entstehenden Stör/klapper/raschel und Stoß-Geräuschen gestört…
This is a remix of Looking4's Pimax wall hanger from YouMagine. I've modified the model to allow it to be mounted to an 8020 extruded aluminum sim racing rig chassis, as a convenient place to hang your HMD once you're finished racing. It…
2 Version is available - No Heat Insert & Heat Insert Required. Heat Insert Version requires M4*H 8mm*OD 6mm Heat Insert
You will need some 2mm shock cord and lido mount of some kind. I use the simple cup holder mount from LIDO. Also you can print the spacer that will mount between the lido ball mount and the bracket. I use this to hold my clip on light.…
Freezer side baskets for a Whirlpool side-by-side refridgerator model GS2SHKXNQ00 Helps keep some of the smaller stuff from overflowing the small freezer shelves.
This is a living hinge printed in TPU (Flexfill 98A). I have used this in some of my other designs ( https://www.thingiverse.com/thing:2867440 ) and have full confidence that the TPU is strong enough and durable enough as a hinge…
I do not recommend to use this for a paintball game. but just for of field fun I guess. it looks like it will fit 18 68cal paintballs. this product have not been field tested. but I think it should work so long it opens op easy and you…
v2 Updates Standard version Softer edges throughout: a 1 mm chamfer on the bottom (which also prevents elephant’s foot) and a 1 mm round-over on top. The walls beside the KX3 foot pockets stay square so the feet still lock in. Shock cord…
This container is designed to fit beside the egg holder on a Whirlpool side-by-side refridgerator model GS2SHKXNQ00
![ZK-4KX (XK-4KX) Buck Boost Converter case / enclosure [with kickstand]](https://media.printables.com/media/prints/1206781/images/9063784_e70ddd2d-ac79-4964-b421-66d14797163d_021b12bd-20d7-4a8e-b4c6-feda49e16809/pxl_20250225_104810433.jpg)
