Counting matching models…
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…
Abmessungen (Changpuak-Berechnung, 868 MHz) Frequenzbereich : 850-885 MHz Wellenlänge : 346 mm Boomlänge : 336 mm (Ø 18 mm) Elemente : 6 (Ø 2 mm, Messingrohr) Gewinn : ~9 dBd Elementlängen & Positionen: Reflektor: 167 mm (Pos. 0 mm)…
This is a remix of the Quadrifilar Helix Antenna by @ jhsandell for 1090MHz (ADS-B) The following updates have been made: The 'bug' that jhsandell noted where the code was using diameters rather than radii has been fixed This version…
This is a 3D printed spiral support structure for the wires of a 435 MHz QFH antenna. The antenna provides a dome-shaped hemispherical pattern that is suitable for operation (transmit or receive) on various amateur radio orbiting…
TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…
This is part of my Long Range Weather Station project : https://hackaday.io/project/191652-long-range-weather-station I wanted to increase range for my 868 MHz lora devices. I followed the link of this "biquad calculator" :…
Model designed in Autodesk Fusion. Antenna created with Moxgen software. Dan Maguire AC6LA https://www.ac6la.com/moxgen1.html Design under Autodesk Fusion360. Mount for navigation holder. Mount for Ikea Tisken suction cup.
Update: New tuned version available, find out more http://qczek.beyondrc.com/lrs-moxon-antenna-v2-tuned/ Just a frame for DIY Moxon atenna. Find out more on my blog http://qczek.beyondrc.com/moxon-antenna-for-lrs-tx/ Just uploaded…
The idea is that by arranging a dipole into a horizontal ‘V’ shape, the radiation pattern will be directed skywards in a figure 0 (zero) pattern. This will be optimal for satellites travelling in front, above and behind the antenna. Since…
Another Moxon antenna. I don't trust other designs and decided to design this antenna to my own specifications. This antenna was designed for PETg plastic, so the dimensions differ from those given by the calculator for a frequency of 868…
BACKGROUND: A little bit of gain can make a big difference in an HF radio antenna, and one of the simplest and smallest gain antennas is the Moxon Beam. Now you can easily build yourself a portable one for the 10 m band with some 3d…
Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…
Frequency F: 868 MHz Wavelength λ: 345 mm Element diameter D: 1.6mm Material: 1,6 mm copper tubes Total number of elements : 5 Gain: 10 dBi Reflector length R: 168 mm Vibrator position F (R-F): 69.1mm UPD (15.03.26) - Vibrator length F:…
Це приблизна модель модуля передавача Emax Aeris 915 МГц. Це допоможе зрозуміти приблизні розміри і на їх основі змоделювати аксесуари для спільної роботи з цим модулем.
This is a very efficent dipole antenna for Lora network. It is tuned for 868MHz frequency more information here : https://github.com/CongducPham/tutorials/blob/master/Low-cost-LoRa-IoT-outdoor-step-by-step.pdf Print Settings Notes: print…
Mounting pipe 32mm, hole diameter 8mm.
Video of build instructions Note: I printed in PLA with 50% infill. I tried once printing in PETG 50% infill but the material was too soft when using a strong band and the frame warped. So just a heads up on that, feel free to experiment…
419mhz Center Freq. Hope the bandwidth is good. This was model 100% to a the calculations of online calculations to the 0.5mm. Going to be intresting to see calculation vs result. I suspect the plastic will have effect but since center is…
This is a re-designed insulator for the 9 element 144MHz LFA PBP Yagi. The former insulator has a flaw. Birds, wind and virbration in the antenna makes the directors turn, which is very unwanted effect. The re-designed insulator fits over…
The moxon antenna at 868 MHz is combined with the Heltec V3 (V4) board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
Frequency: 850-885MHz Gain: ~10dB location and length of elements (from left to right): Vibrator length: 173 mm Length of the reflector: 181 mm Director 1 length: 164 mm Director 2 length: 162 mm Director 3 length: 160 mm Montage:…
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it…
Boom is 3D printed to avoid mistakes with drilling and is divided to 2 parts. Use super glue to and joint.stl to fix connection. Elements are from 3.2 mm al welding rods. 25mm PVC tube is used as support. Dimensions:…
1090 MHz antenna holder for sending data to Flightradar24 and FlightAware aircraft tracking servers. --------------------------------------------------------------------------------------------------------------- Držák 1090 MHz antény pro…
General This is a quadrifilar antenna for 868/915 MHz with mount and radome. Antenna has been succesfully deployed for TinyGS: SA0PEJ_900 There is a 70cm version of this antenna available. qfa-qfh-antenna-70cm-band Printing and building…
I've been looking for a clip for a garage door remote for a long time, but I couldn't find anything. I had to make my own version for a popular remote. For remotes known as Universal 4 Buttons Garage Door Opener Remote Control 433MHZ
This is an esp32 enclosure for when you want to use an OLED screen and a CC1101, 433Mhz module, that entirely clicks together using snap joints. No screws are required for assembly! There are a lot of useful projects that require an esp32…
Arduino UNO R3 with 433Mhz HAT Case Enclosure The objective was to design a simple ventilated case that would suit the 433Mhz HAT mounted on top of an Arduino UNO R3. The HAT was obtained from Jonathon Oxer (Freetronics) and comprises a…
Enclosure for cheap Chinese 10 MHz OCXO board with CTI OSC5A2B02 labeled as sz-plazma.com, example: https://www.aliexpress.com/item/1005004468915743.html No screws required! Just press fit. If top and bootom parts are loose you can use…
This is a Helical Antenna for the 915mhz band. Intended to be used with rocket avionics but will work for any 915mhz application. Copper wire is 1.7mm solid coper. Build Video can be seen here https://youtu.be/JCoJQt3CkDY Print Settings…
Moxon Antenna Frame (868MHz) For copper wire with a diameter of 1.6 mm.
Powerful antenna validated :) Design under Solidworks Created with Moxgen a software from AC6LA I will upload pictures later. other software used to compute Moxon Antenna : 4NEC2 EZWdemo (EZNEC) Happy printing Renba ON5DB Category:…
Can be used for an RFLink setup for example with an Arduino Mega (with micro USB or USB-C connector), a 433 MHz superheterodyne transmitter, and a receiver with copper antennas. The case is a somewhat loose friction fit, to make it easy…
This is my attempt at a very small case for the Femtofox Meshtastic node. More information on the Femtofox can be found here: https://github.com/femtofox/femtofox Some notes: Additional Components: N Female to IPX/UFL RG178 Cable - 10 cm…
This is a simple form for building a directional antenna for the 915 MHz band. It's based on the DK7ZB "Quadlong Hentenna" ( https://www.qsl.net/dk7zb/Quadlong/Hentenna.htm ), but scaled for 915 MHz and turned sideways for vertical…
This is an external mount for a 1090 MHz ADB-S antenna. The antenna design itself came from this video https://www.youtube.com/watch?v=NZWY_eCBGXk and I decided I wanted to mount it outside for better reception. You will need: 1 x piece…
Elément diameter : 4 mm for 15 mm boom. use aluminum for the elements and brass for the dipole. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . This design remains experimental errors are possible. Particular attention will be…
An easier to print qfh antenna that can be adjusted for variance in pipe sizes. this should fit 1/2 pcv pipe/conduit as well as any pipe within approx 21-24mm Improvements include. ~ Symmetrical parts ~ Correct size for 137.5 ~ Short and…
Materialien & Bauweise Boom & Halterungen : PETG (Outdoor-tauglich) Strahlerelemente : 2 mm Messingrohr - Abmessungen siehe dozorfeo Sleeve-Balun: 6 mm Messingrohr für RG58/Aircell5 Montage : Sekundenkleber + modulare Adapter…
Simple 1090MHz antenna stand from FlightAware. Just snaps onto the antenna. There is a cutout on the bottom for cable routing. Simple, functional, quick to print. Link to used antenna:…
419mhz Egg Beater antenna List of parts needed. 8 feet 1/2" by 1/8" Alloy flat stock x10 3mm Plastic brass inserts x10 3x6mm screws Print Settings Resolution: 0.2 Infill: 100 Post-Printing 50mm PVC Pipe Egg Beater Category: Parts
The MHz Tomoscopy project website https://tomoscopy.eu/ The MHz Tomoscopy project has received funding from the European Union’s Horizon Europe research and innovation program under grant agreement No. 101046448
A simple DIY ADS-B antenna for 1090MHz. Can also be used for different frequencies/wavelength. Refer to the required antenna length from literature. Use a 180mm long piece of M16 installation pipe (16mm outer diameter, 14mm inner…
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
This is 868Mhz LoRa Meshtastic Yagi-Uda directional antenna with 6 elements and square boom. Actually calculated for 869Mhz, since this is closer to real meshtastic working frequency in UE). Dimensions were taken from widely-known DL6WU…
English description: This is a tweakable Moxon antenna designed for LoRa projects operating at 868 MHz. Wire thickness could be 2-2.2mm (diameter) The front section of the Moxon antenna can be moved to fine-tune the antenna dimensions and…
This is a holder for the FlightAware 1090MHz ADS-B Antenna. This holder uses 4 M3x20 screws and 4 M3 nuts. Scrape the back with coarse sandpaper, clean and install double-sided tape to stick to a window. Print Settings Printer Brand:…
In my current house I do not really have any great access to putting the antenna for my FR24 flight tracker in a suitable outdoor position but still want as good reception as I can get. I found that by securing the antenna to the inside…
Moxon antenna created to be easily tuned with VNA NOTE: It only makes sense to download and build it if you have VNA and know how to use it, without it you won't be able to tune this antenna. For most cases the TC3EC Moxon Antenna (…
Design allows a FlightAware ADSB (1090Mhz) Antenna to be fairly easily mounted on the roof gutter (Steel Quad 150 Profile). It is mounted by placing over the edge of the gutter lip and rotating it back to the fascia board which you put a…
The stem enables to wind antenna coil for 1616mhz. The polarization is circular and stem It contains both - left and right hand path(L,R). You can chose desired polarization base on your needs. If you transmit an signal using satellite…
The ANT-916-CW-HWR-SMA antenna offers exceptional performance in the US 802.11ah range of 902-928mhz, but the pin that holds the ‘elbow’ of the antenna together is prone to damage when not used carefully. this antenna splint holds the…
Desktop stand for a 1090Mhz PCB antenna, and a window-mount. There are two stands, v1 is shorter but should should have enough room to use some RG316 or RG174 coax, or a right-angled SMA connector to connect to your chosen device. v2 is…
I created this case to be used as a mouse jiggler/mover. It was inspired by Nicek’s case, but I didn’t like the idea of using glue or magnets, so I designed it from scratch. The software for the mouse jiggler/mover is available here:…
1280 Mhz Biquad antenna for 2mm solid copper wire.
this is a miniature case for a DigiStump Attiny85 and a common 433mhz transmitter. both wired together it make for a Micro FoxHunting Transmitter on UHF/70cm band! you only need a USB power bank to plug this in and you are ready to go.…
The moxon antenna at 433 MHz is combined with the Heltec V3 board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
868Mhz / 915MHz Antenna Dipole cover and mounts To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament…
This is cover for 868MHz RFID SAW bandpass filter from Aliexpress . After printing, glue together with hot glue gun. I have used black hot glue.
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
A remix adding hole for wooden rods and wire on top of it. Made as I didn't have aluminium rods and it was easier to solder the coax cable directly to the antennas. Made it easier for me to tune the antenna length to fit the 137 MHz, than…
These are distance brackets for RF door contacts (round oval transmitter PCB part, aprox 59,8 mm x 23 mm x 12,7 mm) in order to lift them by 12,5 or 26mm to be in better reach of the magnet on the other part of the door/window/lid.…
This case will fit the following 50MHz-6GHz Low Noise RF Amplifier Ultra
A bunch of 1700mhz RHCP helical antenna's from DEREKSGC that I rendered out since scad can take some time rendering models. I have also included ground planes that you need to cover with aluminum or copper tape to act as a…
This is a small enclosure for the commonly used 433MHz RC sender module. Print instructions Printer: Prusa Mini Supports: not needed Layer height: 0.2 mm Infill: 15% Filament: Prusament Vanilla White
Makes it easier to assemble the 868 MHz LoRa Yagi by Taste The Code. Assures the dipole is square and symmetrical inside the boom, with 2mm spacing. https://makerworld.com/en/models/1120277-yagi-antenna-for-lora#profileId-1118525
This is a project for a 10 MHz GPS Disciplined Oscillator (GPSDO) designed around an Arduino Nano. It provides a highly accurate and precise 10 MHz signal that can be used to improve the accuracy and precision of other laboratory devices…
DollaTek 433MHz RF Transmitter Case This thing is a simple clip-on case for the common DollaTek 433MHz RF Wireless transmitter chip. It was designed in Fusion 360 and is just a simple push-fit case to house the electronics. Stopping them…
I had to very slightly increase the size of the circuit board mounting holes, just using a drill bit by hand, to get the board to drop into the bottom of the case. I printed with PLA and have had no heat issues running the circuit board…
Foldable 3 Element Tape Measure Yagi Antenna for Amateur Radio Direction Finding Very good F/B ratio for easy direction finding Ideal for Draussenfuchs [1] or Amateur Radio Direction Finding (ARDF) Light weight (around 70g, without cable)…
This is a full radom for Moxon Antenna. Added the V5 version with pole fixation and line to close the radome more firmly.
german version below This two models feature a full set of spare parts for the mounting parts of MHZ pleated blinds. Since our ones start to break after 20 years of use. The Clip is quite tight but should hold the pleated blinds. Reuse…
Meshtastic case sized of a car alarm keychain. Key idea - make cheap keychain meshtastic node - always with you. You connect it, charge it, sending/reciving messages... thats all. No place for buttons or attachments - just basic…
Small case for a 433Mhz relay board Print Settings Printer Brand: Prusa Printer: I3 MK3S Notes: to print as the black one in the photo set top and bottom layers to 0 and select the honeycomb infill Category: Electronics
Bought a frequency scanner to get the frequencies used by other companies we work with. It came as a bare board with no case so I made this!…
This is an improved version of my 20m loading coil for Gabil 50" whip. It should be MUCH easier to actually make. This print should work on most printers without needing support material (all overhangs kept to 45 degrees). PETG…
This is an improved version of my 40m loading coil for Gabil 50" whip. It should be MUCH easier to actually make. This print should work on most printers without needing support material (all overhangs kept to 45 degrees). PETG…
This is another iteration of my cover case for esp8266 development board with 433 ASK receiver or EV1527 receiver. Check OpenMQTTGateway for more info howto interface esp8266 with EV1527 or other 433Mhz based receivers.…
This is to replace the case on the cheap Saleae Logic Analyzer clone. The original one was a terrible injection mold, and the pinout was printed on a cheap sticker that smeared when I touched it. I only interface with the pins…
1090 MHz or WiFi antenna holder for sending data to Flightradar24 and FlightAware aircraft tracking servers. --------------------------------------------------------------------------------------------------------------- Držák antény 1090…
Box to cover frequency counter. There are no holes, you have to drill it base on your needs/ connector usage. You can insert in in switch on/off for 9v batter or power adapter jack for outside connection. Enjoy.…
The 915MHz cavity filters from ACASOM are a bit spikey because of the exposed screwheads poking out the top. I wanted to use one with a FemtoFox but was worried about the exposed bits damaging something else in the enclosure and made…
My design was inspired by a radio telescope I saw that was made out of an umbrella style photographers light reflector. It was less than 1m in diameter and the EMF fabric was stuck on the inside. I thought it would be much neater (and a…
Wall mount with extension from the wall. Insert Nuts M3xD4.6xL5.5.
Need a simple pole mount antenna mount? You have come to the right place. This was designed for this antenna.
Adapter for the robot KUKA VKR16 R1610-2 (CYBERTECH) to hold the gripper SMC MHZ2-25C. The blueprints of the gripper are on the photos.
Articulating arm and base for 868 MHz Yagi antenna
dipol from 8mm aluminium pipes in centre is place for balun
ABB - Jussi style Light switch cover The unit hosts the KTNNKG 433MHz Universal Wireless Remote style board (KTNN-YK86-A3) with 27A battery. Assembly: The circuit board goes back, buttons in the holder from the top after the battery…
This model is a 3D printable frame designed specifically for a 1800 MHz biquad antenna . It provides accurate geometry and stable mechanical support for the antenna elements, ensuring consistent spacing and alignment, which is critical…
Konstrukce, rozměry a fázování viz odkaz níže https://www.scribd.com/document/464125720/Dca Křížem jsou trubky sevřeny 4mi vruty a pojištěny lepidlem. Do spojky dipólu vložíme čtvrtvlnný kabel s přiletovaným dipólem a před sevřením můžeme…
Front bumper for kayouloin frame by kayouframe. I add a lock angle for the fpv cam and simplify the mount of the elrs 900MHz antenna
This is an improved version of my 30m loading coil for Gabil 50" whip. It should be MUCH easier to actually make. This print should work on most printers without needing support material (all overhangs kept to 45 degrees). PETG…
Give your Meshtastic / MeshCore node a proper RF front-end. A SAW filter in front of your LoRa radio cuts out-of-band noise (LTE, GSM, pagers, etc.) and noticeably cleans up reception — more stable mesh, better range, fewer missed…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
Dies ist eine Halterung für einen Funkempfänger des oben genannten Modellles (gibt auch einBild vom Funkempfänger). Der Deckel lässt sich schieben und hat ein Loch für die Antenne, welche man optional an den Funkempfänger löten kann.…
Use case If you are not an electronics hobbyist or radio amateur, you will probably have no use for a highly stable and very precise 10MHz reference signal source. For the others, this cheap part is a treasure. Yes, the OCXO module itself…
