Counting matching models…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
This pouring spout is designed for canisters with DIN threads , commonly found on 10 L and 20 L canisters . An integrated air channel allows air to flow back into the canister while pouring, resulting in a smooth, controlled stream and…
The title says it all. A stand, made to fit the sizing of a Glock 17 Gen 5.
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf DN50 (z.B. HT-Rohr) mit 50mm. Ich verwende diesen Adapter um schnell und einfach einen (zusätzlichen) Zyklon in meiner Absaugung zu installieren. Hierzu habe ich den DN50…
V1.2 Noses should fit into original slots. Better clearance Add slim Version (i.e. Arctic P12/P14 Slim)
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
LUN5HTIME's OTF design has already provided me (and Christmas gift recipients) hours of enjoyment. I did run into a few issues that prompted me to make a few changes and then I went down a rabbit hole. Most of the changes I made were to…
I Wanted to double sided tape it so I needed a version without the reinforcement behind. So I've slice it in PrusaSlicer. And I've print it at 102% (When you play with scale more than once in prusaSlicer this scale add up! be sure to…
A box to contain a pn532 rfid module. No arduino on this one because I'm connecting it directly to my pc (via an usb<->serial adapter). Communication is done trough the libnfc library under Linux Debian (…
Pipe clamp to fit an 50mm OD Tube, Snaps onto the pipe after skrewing it on the wall. Can be used with bolts up to 5mm thickness. A small M5 washer is intendet to be used to reduce the contact pressure of the bolt onto the plastic.…
Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
Small case for the elechouse PN532 NFC RFID Module v3 . Based off of but not remixed from aix150's design . Mine is for a lock, which is why I created the original with a lock design on the lid. The base also has an inset portion for the…
About The included 3MF/STL files are based on a 5mm diameter x 3mm height neodymium magnet. The Fusion file is included if you have different sized magnets, changing the parameters will adjust the model. No modifications are necessary to…
Stopfen um HT Rohr (50mm) als Köcher zu nutzen
Holder design for a Gillette Fusion5 razor and the cartridge refill case
Use case: I found it rather annoying and hard to not make a spill while adding oil to my Z4 with the N54TU engine. There's not enough room to maneuver an oil container without making a small spill. This should help resolve this issue. I…
This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…
Recreation of the well-known Fifteen52 Turbomac to work with Lego Technic parts. This model has been splitted in two halves for better printing and minimum usage of supports. The holes on the hub uses this part: BrickLink - Part 32002 :…
IBC S60x6 DN50 Adapter Searched for this specific adapter model, but couldn't find any, so made one myself. Enjoy! Category: Parts
The case used for the TapTo USB-C Reader . Compatible with any of the black USB-C PN532 NFC modules available on sites like AliExpress. Please see the TapTo Wiki for more information about TapTo and the PN532 NFC module. This model is a…
Because the model of @Agar_146696 ( https://www.printables.com/de/model/68604-osvac-adapter-m32-dn50 ) was not long enough, I've designed this new version. Edit: After we've made aware by @Charly_Brown_539474 that the outer diameter was…
M3 DIN562 square nuts are difficult to find in North America from retailers like Amazon, but M3 square nuts meeting DIN557 specifications are very easy to come by. Because of this, I slightly modified the original Prusa i3 MK3S print fan…
This is a very simple and easy to print travel box Gillette Fusion5 razor. The outside dimensions are 147mm x 47mm. The gap between the top and bottom part is 0.05mm. It works well on my printer setup. If needed you can slightly scale the…
I couldn't find a suitable wall mount for the powered tools of the Gen5, so I made my own. Took the nice working "mechanics" from albrnick's wall mount extension https://www.thingiverse.com/thing:2860289 The screws I used are Countersunk…
3D model description I’ve created two separate waterproof cases one for the ESP32 WLAN module and another for the WT32-ETH01 module in combination with the PN532 NFC module to protect your electronics in outdoor or damp environments. Both…
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper without brakes according to DIN5963. Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame…
Rohrschelle für DN50 Rohre für Wandmontage mit 4,5 mm Senkkopfschrauben. Der Abstand zwischen Wand und Rohr beträgt 25mm. Falls sich die Mutter nicht in die Aussparung stecken lässt, erhitze die Mutter mit einem Fuerzeug oder Lötkolben.…
i recommend using snug supports
Pot to fit a HT DN50 Pipe Junction
You may be thinking - another front fan mount?… Yes, though this one is different from all the others I have seen. I personally didn't like the fact other designs added an additional section in-between the front plate and case.…
This is a BMG direct drive adapter for Ender 3 V2 with Hero Me Gen5. Mounting design/orientation inspired by speedDrive v1. Tested on TriangleLab BMG v2 extruder, designed using official bondtech dummy model, so it might work for Bondtech…
This is an enclosure for the PN532 V3 or V4 with a 5mm hole for any cable to pass through such as an ethernet cable, this also includes a pressure fit lid. V2 Edit : Thicker walls as the original was slightly flimsy, same top and bottom…
An oil filter wrench for some bmw models.
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper with handbrake according to DIN5963 Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame with…
🔒 Introducing Custom 3D Printed Inserts for the Lifepod 2.0 for the Glock 17 Gen 5 Insert by Veracon Engineering! Elevate the security and organization of your firearm storage with our custom-designed Glock 17 Gen 5 Insert for the LifePod…
Printing Printing this part is less problematic than one might think. I had it printed successfully on a Ender3Pro from PLA and on a Prusa Mini from PETG, both without supports or brim. Sure, the surface quality at the top part of the…
If you are looking for a vacuum valve to be installed directly in your 50mm (DN50) pipe installation you might find this thing very helpful. As an example if you use one of those cyclone dust separaters and fear that your holding tank…
A case to connect a Sensirion SEN5x series air quality sensor to a D1 mini for wireless reporting. Based on the mechanical design-in example for SEN5x & SPS50 .
Hi, I could not find the right version(s) for a kinda small footprint blast gate, so I modeled my own. You can mix and match the parts the way it fits your needs. You'll always need: 2 spacers 1 slide 2 baseplates Furthermore you need 6…
Muffenstopfen DN110 nach Norm Zur Abdeckung von Rohren
Supplement comfort legs for acer nitro 5 (25 mm). 2024/02/25 New model stilized. I add the f3d to be able to modify, as it seems that there may be different sizes or models between countries. Acer nitro 5, legs to slightly tilt the…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
I printed with supports for ‘build plate only’ to support the tabs on the top of the model. I would also suggest printing in PETG, PLA will work, but if you live in a warmer climate (like the Southern or South Western United States) the…
Extended ~2mm from factory mag release. Works well and allows eject magazine witout altering grip.
This is a protecting case/cover for the Samsung "Frame" TV remote control called BN59-01290A (check inside the battery cover for your model). It is printed in TPU on stock Creality Ender 3 with support. The back of the case is a bit too…
Das sind Adapter um aus einem HT-Rohr (DN50) ein Tischbein zu bauen, um den verbauten Tisch in der Dinette unseres Camper abzustützen. Das Maß ist passend für unseren Knaus Boxstar XL 600 Lifetime konstruiert. Sollte aber auch auf anderen…
A wall mount for the Samsung remote control BN59-01358B. The bracket is designed for 1 remote control and is screwed to the wall. Eine Wandhalterung für die Samsung Fernbedienung BN59-01358B. Die Halterung ist für 1 Fernbedienung…
This is a wall mount for a Dyson Gen5Detect . Unlike the factory wall mount this bracket does not contain a built-in charging port but the charging port on the vac is available and accessible if you want to manually plug it in. For best…
The hard drives in the Jonbo N5 ran a bit too warm, so I decided to redirect airflow from the upper front of the case down to the hard drive “basement”.
This model is designed to securely connect pipes through barrel walls or IBC containers. The model consists of two parts - the grommet and the nut. The grommet is designed for easy pipe installation, while the nut ensures a tight seal…
Der Deckel passt auf HT/KG Rohre der Größe DN40, DN50, DN75
This model was based off of the excellent TapTo USB-C Reader by Wizzo for the same purpose! For aesthetic reasons, I wanted the model to be a little larger, just so that it matched the size of the NFC Cards. Aside from that, I also added…
Endstopfen für die Nicht-Muffenseite eines 50er HT-Rohres. Ist zur Aufnahme der Standard-Dichtung vorgesehen. Wurde bis jetzt noch nicht druckgeprüft. Endcap for DN 50 HT-pipe, straight-side end. Takes standard seal. Wasn't pressuretested…
This nose can be used for a puppet-, plushie-, robot- or even a fursuit-head. Scale it to the size you need. Category: Animals
German: Verschlusskappe zu DN50 Rohren, Verschluss bzw. Endkappe. Einmal mit Schrift "HT50" einmal ohne.. geeignet zum Verschluss von Rohren, als Endstück. Abmessungen: Passend zu DN 50 Rohren, Materialstärke 2mm Andere Dimensionen in…
This is a parametric pipe plug designed for sewer / drainage pipes with rubber seals (HT / KG systems). The model is generated using OpenSCAD and supports pipe sizes from DN32 to DN110 . For convenience, I have also included pre-generated…
This is a remix of Hero Me Gen5 gantry adapter for Ender 3 V2 OEM hotend (Originally named Ender_3_v2_Gantry_Adapter_9A.stl) The improvements are: Extra screw holes for better stability. (some ender 3 v2 doesn't have these holes, please…
Adapter von CAMLOCK zum Standard DN50 HT-Rohr für zentrale Absaugungen in der Werkstatt.
Dies ist ein Sperrschieber für die Absauganlage für Rohre in der Größe DN50 (2") Er ist leicht zu montieren mit nur 4 Schrauben und Muttern der Größe M5 . Die Schrauben müssen mindestens 15mm (0.6") lang sein! Er lässt sich mit dem Winkel…
I will be glad to have your support for my projects! https://boosty.to/mironovpaul/donate Good afternoon, friends! I really liked the extruder with three 5015 fans, and I wanted to improve it by installing a more efficient feeder and a…
N54 Walnut Black adapter for Vacuum
I choose to operate my z-wave controller (Aeotec Z-Stick) plugged into a powered USB hub as opposed to directly to my home automation PC. If this is something you do or are considering doing, now you can mount the unit securely and…
I remixed the battery cover from another remote control to fit on the model BN59-01303A. It is a little bit too thick and it fits a bit tightly, but then you will not loose it easily ;) It prints best standing with brim.
Saugerdapter DN50/DN40 zu Staubsaugerschlauch innen 38mm Das Gewinde sitzt sehr fest und dichtet sauber ab Vacuum cleaner adapter DN50/DN40 for vacuum cleaner hose inside 38mm The thread is very tight and seals cleanly
I am doing an LS1 ZF8HP70 swap into a BMW E39 and wanted a mock up motor and trans to make initial test fitting a lot easier. Refer to my other models for the LS1. I found a good quality 4WD trans scan and some partial scan data of a 2WD…
printed as full solid. small supportstructures for the protruding pin.
This is an internal mounting adapter for a Jonsbo N5 case for mounting six 2.5" SSD with a 120mm fan for cooling. Required Hardware 24 - M3 button head socket screws - 6mm long Print Settings I printed it with PLA. PETG would be a better…
Automatic Klipper/Spoolman configuration with RFID-tags This model is part of a system I use to select Spoolman spools from RFID tags attached to spools in klipper. Klipper can then verify that the right filament is used before printing…
This is a mount for the Gen5x Ridgid folding hybrid light. It's a much tighter and more secure fit than using two screws in the stand eyelets. I printed using 20% infill which is the minimum infill I'd use, next print I'll probably do 50%…
Air quality sensor SEN5x MH-Z19 SSD1327 Hello; I would like to present my take on air quality sensor made out of: ESP32 board SEN55 - PM/NOx/VOC sensor MH-Z19 - CO2 sensor SSD1327 - display Chassis will require : Filaments Geetech marble…
A simple clamp connection to attach a 50 mm diameter HT pipe to the wall. The pipe sits close to the wall. However, the bead for the rubber ring of a butt joint has enough clearence. It is mounted using a Spax screw and clamped using an…
Due to tiny dimensions, the thread is self-tapped by the screw, so that the nut retains some holding power. If you need other dimensions, let me know. Height: 2.4mm ____ Version history: v1.0 29.8.2023 Initial release 29.8.2023
Die Kugel dichtet in der Schale 1 mit einem O-Ring ab. Bei anderen Blast Gates in diesem Design hatte ich das Problem dass Sie nie ganz abgedichtet haben und immer ein wenig Falschluft gezogen wurde. Passender O-Ring:…
This was made for a garden water dripping system. I printed it with PLA without infill, but with 3 perimeters using a 0.4mm nozzle, this way it was basically 100% infill / solid. Male to male adapter was ok to print without supports.…
This is a two part component. It is a 2x 140mm shroud for the Jonsbo N5 to be mounted in front of the drive bay. The original wooden slotted cover will mount on the front of this component. I designed this component to fit my very…
HomeKey was recently reverse engineered, you can find a link to that here: https://github.com/kormax/apple-home-key-reader I needed a case to mount outside my home and I couldn't find one that looked clean enough so here's my take on it.…
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
Ich wollte beide Platinen zusammen in einem Gehäuse haben, also habe ich ein Gehäuse dafür entworfen. Auf die Erhöhung passt perfekt der PN532 Ich habe es so konstruiert, dass der ESP32 zwischen den Stiften liegt und nicht angeklebt oder…
SEN55, SEN54, SEN53 Environmental sensor mount. Print with support.
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
Includes: Two types of front badges Rear handle Compatible with all body versions. Only for facelift vehicles. I recommend printing in ASA, or alternatively ABS or PETG. Facelift is here:…
This case mod allows you to add 4 additional drives. It uses the standard Jonsbo 4 disk backplane found on the N4 and N5 case series. It can be easily purchased from many stores on Aliexpress . There is enough room for a standard…
GoPro / DJI Action 5 Pro Mount for Foxeer Mega 5 inch Print it. TPU / 70% infill / 3 outlines / nosupport
T Slot DIN508 - M5 6/M6 8/M8 10/M10 12/M12*14
Zum Verschließen von 50 mm HT Rohren.
Updated to support the Hero Me Gen5 Master Suite. There is a version for the Creality OEM plastic single gear and roller extruder and another for the Creality metal Dual Gear extruder (also the Winsinn Dual Gear). Follow the recommended…
WARNING: The ribbon cables on the fokoos odin are dangerous, and not meant to be use on motion area. The ends of the ribbon can easily "unglue" and overlap the next one, and the way they designed it can create a short (there should have…
This is a housing for a XL4005 DSN5000 DC-DC adjustable step-down power Supply module. It has ventilation holes and cable holder on both sides so that you don't accidentally pull the cables from the power supply. The housing can be…
Dieser Adapter macht es möglich standard DN50 Rohre mit Dachrinnen der Nennweite NW53 (z.B. von Marley) zu verbinden. ------------------------------------------------------------------------------------------------------------ This…
Two Adapters to connect the Festool D27 standard hose to a 50mm pipe system. Included files: D27 Hose to DN50/HT50 DN50/HT50 to CTM Midi Flansch / D27 Flansch Category: Hobby
Oil filter wrench for BMW N52 and N20 oil filter cap
Update July 4th 6PM PDT: Updated the 'no chain versions to support both Ender 3 series and Ender 5 series printers. HMG5_DD_mount_Ende3-r5_No_chain.stl HMG5_Dual_Gear_DD_mount_Ender3-5_No_chain.stl Update July 4th 5:15PM PDT: Updated all…
11-3-2025 Update New version uploaded that includes a 120mm fan for cooling. https://www.printables.com/model/1469160-jonsbo-n5-internal-25ssd-x6-mount-v2 9-1-2025 Update. I updated the mount to allow for better airflow and reduce the…
Remote control holder for Samsung BN59-01041A or similar. Open-bottom model for dirty environments.
Over designed bracket to hold the Ridgid 18V Pane Light on the wall for both storage and for use above my workbench. My garage door blocks my overhead lights and this is a great alternative to get some extra light on the workbench as well…
Bigger hole to support 3rd party USB-C cable for AirPods like https://www.amazon.de/gp/product/B08KXQFM43 . Bigger hole for Gen5 Apple Watch USB Plug from remix https://www.thingiverse.com/thing:4390212 Print Settings Printer Brand:…
This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible…
![ESP32 + PN532 NFC Module Case [Waterproof]](https://media.printables.com/media/prints/1069827/images/8093768_c0631fd9-f6cf-4489-a895-df58f6477074_8d74c501-1612-4c6c-a51e-08b0623ff4a2/screenshot-2024-08-31-202814.png)
![Tischbein Adapter für Camper Van (PVC HT DN50, Knaus Boxstar) [german]](https://media.printables.com/media/prints/268027/images/2384388_e3207d59-d24e-4a4f-a106-d25ee08c62a9/2022-08-29_06-42-24.png)
