Counting matching models…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
This is a Remix of an design from sharanchius on Thingiverse to make printing easier/faster on larger machines. Everything fits on an Prusa MK3S , Creality Ender 3 or similar sized printer. Its very important you read the Printing Notes…
Support me & Buy a T-shirt Introducing our Urban Road Construction Set in 1/64 scale, perfect for model cars like HotWheels ( Amazon | Alliexpress ). This comprehensive set includes various types of road segments, allowing you to create a…
I wanted to organize our small pile of home networking gear, so I designed this 3d-printed rack. From top to bottom, it holds: Feed-through patch panel with slots for 9 keystone jacks Cisco SG250-08 L3 managed switch GL-iNet GL-MV1000…
Update 2024-02-10: Updated the cover design to allow printing the teeth flat on the build plate rather than cantilevered with overhangs. The design should function the same, just improve bed adhesion. I included the original cover design…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
This is my attempt for a universal cable labeling system. The label holder consists of a main part and a snapable cover. Labels can be stuck to the main part's flat surface or inserted into the cover if they are not sticky. Thus, using…
Second revision of this project: -improved assembly -improved clamp stability -no need to use supports This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two…
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
Network cable management bracket. Separates network cable runs and can be screwed to a surface. Supports Cat5, Cat5e, and Cat6 cable types, though smaller diameter cables will be looser between the combs. Screws holes are sized for…
This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to finish the build, it is definitely possible to print…
Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…
This is IT network tech's best friend and essential tool in his/her tool kit. When pulling bundles and bundles of cables to the server room, this will help you create neatly organized bundles. Commercially available for $40-50 USD. Nozzle…
I made this tool after separating a couple hundred pairs and the tips of my fingers began to hurt. The end of the tool is just big enough to fit the two ends inside and the thin body of the tool allows you to roll it with ease. Along the…
This print will help you make sense of your network cables. It bends into shape. The spring back keeps in in place on the cable. There a spot to put a printed label. The holes were sized for a wire with a diameter of ¼" (6.3mm). I…
This is just a simple 1 1/4" (31.75mm) diameter passthrough to get a cable through sheetrock. It just threads in after you drill out a slightly undersized hole. Drill a 1 in (25.4mm) or 1 1/8 in (28.5mm) hole. The threads are 1 1/4"…
A simple network rack cable guide that snaps in the square holes. PETG, 0.2mm layers, no supports F3D file is included.
A simple solution to keep your cables organized on any standard equipment rack which includes, servers, networking equipment, and studio equipment. The model features 2 holes appropriately spaced for mounting anywhere on your rack. It…
20May20 Marius-Bloemhof requested the CAD files: ( https://cad.onshape.com/documents/5425e358a4e266ea950b034e/w/fb495421e309359b374e4475/e/07ed980bcf8592c544c8964f ) Update 24Aug20: I've posted a new design for a blast gate based on a…
I wanted a 14 slot comb, so made this remix of https://www.thingiverse.com/thing:4205894 Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports: No Resolution: .3 Infill: 7 Filament: hatchbox…
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
The CUBE Rack Cube-based network cabinet / racking system with many features: Build using Standard M6 Cage Nuts (no other non-printed parts needed!) Fits standard 10" network and server cabinet equipment Simple to print and build!…
Update 30 Sep 25 Michael Bohrer ( MichaelBohre_2970532 ) commented that he had broken this design because parts of it were too thin. On investigation, I agree that the outer edge of the connecting tube is thinner than I intended. I've…
(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them! Just wanted to share…
I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…
I need a tool to help me replace network switches and ensure that all cables are connected to the correct port. This allows you to securely clamp the network cables and go back 1 to 1 after replacement. I have created a 16 and 24 port…
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
Holder for the Klein Ratcheting Cable Crimper (pass-thru) / Stripper / Cutter. Model is VDV226-110. This works with the Gridfinity system.
Hey guys i'd like to share my recent bigger project with you, my 10 inch Network Rack. I was always disappointed when i saw all the mess and not really organized cabling and setup of my network devices at home. Inspired by another 10inch…
A reusable clip to use instead of disposable zipties Edit: added other sizes of original models
A mini home lab server rack, designed for small business that don't require much network hardware. feature: Cable duct management, to hide your ugly cable Acrylic enclosure to keep dust away from your device 120 fan to keep good airflow…
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Our network engineers at our company requested a piece to easily hold cables while depatching so that they don't lose track of their order. included step file if you want to make easy adjustments like numbering or whatever. NO SUPPORTS…
Note : If you cannot remove the pegboard from your networking cabinet, this design will not work for you. Needed a patch panel for my networking cabinet and couldn't easily find one that would fit the 6"/12" mounting holes in it. So, I…
##English## Here is my almost completely printable 10 inch rack from 3U-5U. All parts fit for the P1/X1 Bambu printers, 6U would not fit anymore - and here I would go for a finished rack for stability. PLA or PETG works, the example with…
This is a 10" Rack mount for a Lenovo Thinkcentre M625q Tiny with the measurements 180x183x35mm. Should fit other PCs from Lenove as well. I used print on supports. I set the brush type to trianlge an painted on the overhangs as seen in…
Identical to the amazing original twist tool, but instead with an added flat bottom to allow for printing flat. Printing this model flat allows for the layers to work with the tool, rather than snapping easily from being printed upright.
Added few more mounting plates: Intel 7th gen NUC, unscrew front screws and pull into the mount, then screw them back to fix. TP-Link managed switch TL-SG108P(E) mount. Additional plate to mount power bricks and wires.
After upgrading my home network with two CISCO. catalyst series switches, I noticed how much these sagged in my (cheap eBay) rack cabinet. I was concerned about the future long term effects. These parts bolt onto the rack rails found at…
Easily identify cables by placing the same number at each end of a cable, you can place multiple on each end if needed for 2 or 3-digit numbers
Tool for untwisting and straightening twisted pairs in network cables. Simply insert the tool between a twisted pair and pull. If the wires need to be straighter, run them through the tool again and squeeze them straight. It is possible…
Update 24Aug20: I've posted a new design for a blast gate based on a ball valve: Print 137795 After having unclogged the groove, in the commercially available blast gates in my workshop dust and chip extraction network, for the umpteenth…
Great for using up that tail end of the spool as it requires very little material to print. You can print the blank in different colors, or just use the prelabeled ones, like the one i have in the picture… print them in pairs and lable…
Do you use the Milwaukee Packout System for your networking gear? Do you hate digging through the stack of packout bins searching for which one holds the correct tools? Look no further! Version 1 prints in one piece and allows for a…
Remix of a remix. For use with 10" rack modules. This design is meant to enable one build a low profile server, network or whichever equipment fits in a 10" rack. While idea is to print supporting structures and buy the rack rails to…
It is possible to use plastic zip ties - width up to 5mm. The design is for cables with a diameter of 6mm in my case ETH cat6. If a different diameter would be suitable, I can add...
Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.
Instructions: Drill a 20 mm hole through the wall Choose the "long" part according to the thickness of your wall Insert the "short" part on one side, and the long part on the other Fasten with a 3 mm wood screw that's long enough to reach…
Wall mounting bracket for our TP-Link TL-SG105 network switch.
This is a 15/16" or 23.81mm (The larger size) suspended ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-B The red flat piece in the middle is a sample to simulate the ceiling bracket (SUPPORTED…
A while back I bought an HP Elitedesk 800 G3 mini to serve as my primary home server. A little bit later I decided to try to put a 2.5Gbe network card in, so I ordered one (aliexpress or Amazon keywords: a+e key m.2 2.5gbe RTL8125B) and…
Normal guide - 0.2mm layers without supports Rotated guide - 0.2mm layers with supports Both guides rely on layer adhesion, PLA+ holds 8-10 STP cables without problems
RJ45 Ethernet Network Switch LED Light Shield Cover Print with any material
This rack is a creation of my own design to organize all of my home network equipment as well as some of my ubuntu servers I use for self hosting. it has standard U spacing for a network rack however it does not match the width of the…
EDIT As picked up in the comments, the width was not quite right, being too narrow. This has been corrected and now measures 237mm c-c and has been uploaded (FrontBackBraceV2) along with the .step file. Apologies if this caught anyone…
This rackmount adapter is designed to mount the TP-Link OC200 controller in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to…
Holder for RJ45 Network Cable Tester that works with the Gridfinity system.
Fully printed mini 10 inch server networking rack for a home lab. 5U height. Fits on a K1 Max in one piece. Clearances are 0.2mm for the top and back. 0.25in holes for hinges for a door option. Updated for 5.8mm mounting holes for use…
Holders for neatly running Cat6 (6.5 mm diameter) network cables on IKEA Skadis pegboards. There are a few variants available: Horizontal for running cables horizontally Vertical for running cables vertically Vertical narrow, 11 mm c.t.c.…
This is a bracket to rack mount a small network switch. It is printed in 3 modular parts. Due to each part being modular, you can mix and match to mount up to 3 network switches in a 1U space. The hardware required for this system is as…
I've seen a few nice designs to mount UniFi equipment but nothing for the TP-Link Omada line. I made this specifically for my home networking setup. Holds the following equipment: Omada Gigabit VPN Router (ER7206) Jetstream 8 Port Gigabit…
I needed a new home NAS to replace my old QNAP servers, so I built one using a Raspberry Pi CM4 with a CM4 IO board and SATA PCIe card. NASsie supports 2 '* 2.5-inch drives and 2 '* 3.5-inch drives. The case is completely 3D printed. This…
I adapted the model from PeterH1500 (many thanks!) to the gray KG pipes which have a diameter of 50mm. I made the following changes: - Inlet diameter changed to 50mm - Changed the diameter of the outlet so that a 50 mm pipe can be…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
With this phone holder for padel or tennis net, you can capture the best moments of your training or your match.
RJ45 network signal cable fixing frame, you need to add adhesive by yourself
This is a mount for a D-Link DGS-105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…
A simple Cat 5e cable manager
This is a mount for a TP-Link TL-SG105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…
These cable combs were printed at the end of my filament spool. With a few wraps around the spool left, I printed several of the combs to try to make some sense of the spaghetti in my network closet. There are three different size because…
Network Switch Rack Ears for mounting a network switch into a 19" rack. Compatible with the HP1810 series. Optional cable management side pass through hole version included. Print Settings Printer: Kossel Mini Supports: Yes Resolution:…
I needed a cable reel to store my long network cable for mobile setups in a compact and protected roll. Cable: https://www.fs.com/products/64123.html
M6 Hex Cage Nut Holder/Adpater Fits a M6 hex nut to use as a cage bolt, other models didn't suit my rails for some reason (these rails https://surplustronics.co.nz/products/10899-rack-strip-single-angle-16u-black) so I made my own…
Simple cable guide for a network rack. Using in my 10" SOHO rack, but would work fine in a 19" too.
My print of this remix include an created .STL for stacking an RaspberyPi acrylic case for home automation OpenHab on top of it. If some body ask I'll make the research for this RaspberyPi case I've purchased years ago (RaspberyPi 2b) If…
Cat6 Patch Cables: Monoprice FLEXboot Cat6 Ethernet Patch Cable - Snagless RJ45, 550MHz, UTP, Pure Bare Copper Wire, 24AWG, 0.5ft, Black, 12-Pack RJ45 Pass-thru Keystones: VCE UL Listed CAT6 RJ45 Keystone Jack Inline Coupler 25-Pack,…
Introducing my mini networking rack! This is a miniature networking rack system designed to be printed on a 220x220 bed. Its customizable with all kinds of various small network equipment! If something isn't here, leave a comment with the…
Gridfinity holder for network crimper plier, made for a crimper with 19cm length, 6cm width at handle. 2x5x4 no magnets.
Recently made a little 'rack' for my network switches and my raspberry pi. Includes some strain relief for the raspi power cable and some routing for the network cables to be a bit more neat. I run the 2.5G qnap switch on the bottom rack,…
here it is! my network cable holder . designed to hold 4 cat5 or 6 or likly any *Tips & Donations* https://www.paypal.com/donate/?hosted_button_id=A7Q7BWYSD9FAA
Designed for the NB-BlackSilentFan 40mm (XM-1) Designed for PETG Print settings I used: 25% infill 4 wall loops Tree supports Rotate top side on build plate Sits very snug and firm. Free to use, free to edit & STEP files are in the…
I really hated having the small network switch sitting on my bench. It took up valuable real estate. So I created this shelf. This network switch shelf is made for a Netgear switch ( the model number is in the picture ) and power supply…
This model will be useful for those who have empty filament spools and don't know what to do with them :) Before you start, you need to buy some parts, presented in Table 1. Table 1 Buy this position Position Named Quantity of pieces…
This model allows for the horizontal or vertical mounting of the Ubiquiti USW Flex Mini network switch in a Leviton Structured Media enclosure. In the horizontal orientation, the switch can be inserted ports up or ports down without…
You can label the tags by hand or use printed adhesive labels. If you are using a slicer that can generate text (e.g. Prusa slicer >= 2.6), you can generate the labelling quickly and easily during slicing. Printing conditions: PETG (PLA…
Organize your networking gear compactly and cleanly, without taking up the space of a full size 19" rack. There are mounts included for: US-8 Switches US-8 150w POE Switch USG Gateway Flex XG 10gbe Switch All mounts have openings for…
This is a Remix of an design from Morganlowe on cults3D view various improvements and changes. Since I had no access to the original CAD files, I had to hack something together. The .3mf file has many negative volumes to make everything…
Printed in eSUN PLA+ 10 percent infill 0.24mm layer height on Creality CR6-SE
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
For my closed 19" Server / Network-rack I was looking for an top fan mount as an exhaust for my homelab gear. While there are of the shelf solutions available, I was interested to see if I could create a top fan mount-model for housing 4x…
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…
Small Clip for storing used Network-Cables to prevent tangling Picture Shows the non-twistet version Customized version of https://www.thingiverse.com/thing:2185517 Created with Customizer!…
I needed a small network rack for my networking needs in my room. It can fit a couple of Raspberry Pi's. Should fit most 5 to 8 port switches and on top you could put on an AP if you need WLAN. If someone could improve on the design I…
Deeper-Wider cable guide model is 50x50 mm WiderCableGuide model is 65x20 mm Deeper model is 50x30 mm
This version of the cable combs is easier to snap into place. They clip onto network cables that measure ¼" diameter. There are two different pitches. The .45" pitch keeps the cables close together. The .60" pitch spaces out the cables…
I designed this 2-part snap-together spool to hold my 25ft flat CAT6 network cable, that I use to take to LAN parties. The spool has a notch in it that lets the inside end of the cable come out through the center of the spool, while the…
I’m an MSP who got tired of labeling cables every time I swapped a switch. I saw a tool like this once but couldn’t find it again, so I made my own. This is a 12-port block. Each block is labeled for different-sized switches to help keep…
Small template for drawing network schemes.
Hello, Welcome to my profile, full of models and miniatures :-) I have a Hand-held phone holder for scrolling social networks for you. A great tool to prevent your hand from hurting when scrolling social networks. It fits any phone and…
![[Print Flat] Network Cable Untwist and Straightener Tool](https://media.printables.com/media/prints/1012720/images/7697237_90664537-2b29-46d4-9706-ec9c9c18fe64_76fcd479-1c22-42cf-87d0-57d88e2eb1c5/screenshot-2024-09-19-at-80727-pm.png)
