Counting matching models…
Make delicious duck toller or other retriever biscuits/cookies for the kids to decorate. Suggest a gingerbread base such as https://www.bbcgoodfood.com/recipes/ultimate-easy-gingerbread . Can use white icing for the white markings and…
Description Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment,…
Other than in the remixed model, you don't need thread inserts; the included screws fit into the holes. Make sure not to overtighten them.
Cover for Garmin LiveScope Plus LVS34 Transducer
Model of the 'thing' hand limb from the Wednesday TV series. No supports needed
Adapterplatte für die Installation des Sonoff NSPanel Pro 120 PW auf Standard 68mm Unterputz Installationsdosen mit 60mm Geräteschrauben abstand. Der Adapter funktioniert sowohl für die horizontale wie auch vertikale Montage. Eine leicht…
Fully scaleable LOVING HEART that seems to fly. Very stable stand. Perfect for valentins day, birthdays, wedding and others. Material: PLA Layerheight: 0.3mm Infill: min. 10%
Holders for both the XIDIBEI transducer and the Seeed Studio transducer. Any VHB tape (very high bond) should work. The zip tie holes are 5 mm x 2 mm. Fusion 360 files included.
I needed a way to mount my transom-mounted garmin strike transducer to my new Old Town Sportsman 120 PDL kayak. I found a few designs here that I was able to quickly munge up to make a specific part. I used the profile of the base/mount…
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
Like a number of you, I'm finding that the universal transducer mounting plate is not very universal for the Old Town Kayak. So I'm making my own custom mounting plate for my Garmin Striker transducer. I've got it so that the transducer…
Fits the original 13mm bolt that came with original knob. If you don't have the original bolt then replace with stainless steel 13mm bolt in lengths of 60mm or 20mm depending on what knob needs to be replaced.
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
I printed this with 6 walls, 50% gyroid infill we will see if it holds up the next season.
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
Inspired by RamjetX design https://www.thingiverse.com/thing:3077632 I made a bass shaker using the Mini Bass shaker pucks by Dayton for my Aluminium 8020 SimRig by www.swedishrigdesigns.com. In the stl files it's included also one design…
Für meine aktuellen Projekte benötige ich die Schraube für eine Logitech Brio Kamera zur Erstellung einer Säulenbefestigung (Ich mag die Logitech Halterungen überhaupt nicht!). Auch früher hätte ich so eine Schraube öfters benötigt um…
WARNING: USE AT OWN RISK. Using this spacer may compromise your hull and sink your ski. You have been warned. Some notes: Printed with PETG at 100% infill. Designed with the Garmin GT56 transducer cable in mind. If the hole for the cable…
This was designed for Tuesfutu's live sonar ice fishing pole kit. It uses one m6 heatsert, mine were 9mm O.D. and 8mm tall like these. https://www.amazon.ca/dp/B0CS6YCWHD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 Print in PETG or…
Camera Mount is 35mm from center to center. Solar Mount is 47mm from hole to hole in a 3-hole pattern. Material Used: Atomic Filament ASA CF Hardware Required: SS M4X10 Socket Head Cap Screws - Quantity 3 (Solar Mount) SS M4X12 Flat Head…
These prints can be used with a galvanized 5/16 bolt, nut, and washer to mount a Lowrance transducer in the scupper holes of a Moken 12.5 Kayak. I imagine it could also be easily customized to other kayak makes and models if not used as…
Es handelt sich um die gängigsten Ultraschallköpfe für Trainings und Simulationen. Genutzt für medizinische Trainings und Simulationen, wie dem Schockraumtraining. In das Loch kann ein Band oder eine Schnur geklebt werden. Drucken am…
Mount for a Haptic Transducer on the accelerator pedal for SIMSONN Pro pedals
Improved design to add countersunk nuts for bolts 4mm & 5mm. Removed the need for a interfacing gasket as it just dampened the vibration effects. added a flange to the top bracket so it tightens to the fiberglass seat and not the plastic…
Die Zylinder werden aus TPU gedruckt und sollen die Vibrationen dämpfen das z.B der Drucker nicht so viel lärm macht auf dem Tisch
Edwards' TruWave invasive pressure transducer holder. It replaces the standard TruClip holder (item TCLIP05 from the Edwards catalog). Available in versions for one or two transducers. For assembly, I used a 1/4 and 2-inch French screw…
Für die Gummi-Vibrationsdämpfer an Stihl Motorsägen wird dieser Stopfen benötigt. Durchmesser: 12mm. Passend für verschiedene Modelle. This plug is required for the rubber vibration dampers on Stihl chainsaws. Diameter: 12mm. Suitable for…
I printed these in PLA at 20% infill at 0.2 layer height. You will have to use screws to attach the legs to the base of the tripod and a screw so that the clip can hold correctly. You may have to scale the model up as I had to after…
This adapter allows you to plug and play your Garmin Striker plus 4 transducer to the Lowrance Ready bay on your Hobie Kayak. I cut up pieces from Yakfisher's design here to adapt to the cheaper transducer than comes with the Striker plus…
I ordered an ice transducer from Lowrance, and it did not come with a stopper. Printed in tpu @ 0.2 layer height and 20% infill. The bonus is that it floats.
-Valentinsday box for Lightspots or Candles -Valentinstags Box für Lichtspots oder Kerzen
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
Holder intended to be glued into DN600 manhole ring
An artistic sculpture. It could act as a sci-fi engine, shelf sculpture, trophy or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or…
Wer seinen Drucker nicht im Erdgeschoss stehen hat, der möchte vielleicht seinen Untermietern einen gefallen tun und die Vibrationen des Druckers etwas abdämpfen. Ich habe mir einen Druckerschrank aus dem IKEA PLATSA Sortiment gebaut und…
I created this remix so that I could have a place to attach my transducer arm without taking up an entire mount location on an inflatable skiff. I happened to have a Scotty 141 transducer mount so I took the gear head adapter off of it.…
I lost my cap for the power/data cable, so I made this one and printed it using TPU.
Inside threads would benefit from printing with thinner layers (used 0.12 myself, but could go a bit higher). Also added a thread test piece if you want to test the threads.
This bracket was designed to mount a Garmin Echomap Plus 44cv fish finder transducer to the Lightning Strike Kayak's transducer cover. It may help with mounting other transducers to other kayaks but no guarantee. Print Settings Printer:…
Ich habe einige Dämpfer für meinen MK3S ausprobiert und auch neue entworfen, die Schaumgummi genutzt haben. Eigentlich haben alle ihren Zweck erfüllt den Drucker leiser zu machen. Wenn allerdings über längere Zeit Filamentspulen auf dem…
LensDock 3 is a modular three-lens stand designed around one simple idea: one universal base, interchangeable inserts for different lens mounts. Instead of making a separate stand for every camera system, the stand uses three identical…
Since the SIMAGIC Haptic Pedals Reactor release there has been a lot of interest in FFB on pedals at an affordable price. As a cheaper DIY alternative I have created a generic housing for a small vibration speaker as an alternative to the…
Transducer storage cup that mounts to the Clam ice fishing electronics caddy. .3mf and .stl files included. Printed at .12 layer height with 3 walls for added strength.
A bracket for mounting a transducer on a 8020 series 10 extrusion. A pair of them are used to create a version of the MiniLev found in Asier Marzo's instructable: http://www.instructables.com/id/Acoustic-Levitator/ The holes are sized for…
Wide grip for attachment to the medilisk, pole or part of the bed. Excellent for use, for example, during patient positioning when it is not possible to have the pressure transducer in line with the heart. Using this aid ensures correct…
3D model of the DOTM axe for Optimus Prime Leader Class. The printing instructions are included in the 3D file. The 3D
Parts: 2x M5-0.8 x 40 mm 2x M5-0.8 Metric Nylon Lock Nut
This bracket allows mounting a transducer to the back of your boat without drilling through the transom (potential water intrusion). Most aluminum boats have hull material protruding past the transom, which this bracket is mounted to.…
This is designed to fit Old Town kayaks that use the universal transducer plate mount. This replaces the plate from Old Town to achieve the angle required for the standard hummingbird mount. Uses 10-32 bolts about 5/8" long.
This is a common amazon piezo transducer for ultrasonic cleaners that typically comes with a 110volt power/wave form supply board. found at this link:…
Last Updated: September 4 2020 This adapter allows you to mount a Humminbird Helix 5 G2 DI GPS Fish Finder transducer to the bottom of a Vibe Shearwater 125 electronics pod. It may work for other Humminbird transducers to be attached -…
Italic English layout typewheels for the Blickensderfer typewriter. For scientific keyboard number 440 or universal keyboard layout wheel number 497. Recommended to print on an FDM printer with - a small nozzle; ideally 0.2 mm - small…
Simple mounting bracket for tt25 transducers, can be used to mount to 80/20 t slot rails. Transducer mounts to this bracket using screws included with the transducer. Original could only be center mounted on a slot or offset mounted on…
Skadis NeuMaster NSD2013 Drill Holder with OpenSCAD script
.25 inch pin and 6mm pin variant (~0.23inch) for larger nozzles or people struggling with the tolerance Category: Other
Hall effect current measurement module mount allows easy mounting on you project. These also allow a user adjustable setpoint that will toggle a digital I/O line in addition to the analog output for live monitoring of the current. These…
Mount for Garmin fishfinder transducer. I realize this mount with PETG 100% infill
This is a model I hacked at in tinkercad to allow a Garmin Striker Plus 4 transducer to mount to the hull of my Hobie Pro Angler 14. The model allows for four 8x3mm N52 magnets to be glued in, allowing the transducer to stay securely in…
separated each ball into its own file Print Settings Printer: Cetus3D Rafts: Doesn't Matter Supports: Doesn't Matter Filament: Hatchbox PLA Category: Signs & Logos
Lowrance Transducer mount for Old Town PDL 120 Kayak. Print in PETG or other filament suitable for the outdoors and heat.
I designed this battery cover for my 1968 BSA A65 Thunderbold to find a place for the electronic ignition unit. The cover fits on a battery with 112-115mm length and 72-75mm depth. It is 25mm high. On top of the cover you will have a…
I used this spanner wrench to work with my Simrad/Lowrance depth transducer. The spanner wrench utilizes M5 heat-set inserts and 25mm M5 bolts as spanner pins. I used a 3/8-inch ratchet to turn it. I also applied a piece of Flywoo Ultra…
You will need a very large printer for this. Mine is 365 x 365 x 600mm. The shoulder is quartered and I have included side pieces for when you create a fiberglass mold. Each section takes about 2kg of filament.
Mounts your GT20 Transducer to the back mounting plate of your pontoon - with no additional tools. Works on various mounting 1/8" thick, 5.5" Wide - mounting brackets using only zip ties to tension. Printable without supports. V2 Size…
Ich verwende unter fast allen Geräte die Vibration erzeugen die Dämpfer von Bambo Lab. Sie verrichten auch unter meinem MK4S ihren Dienst. Daher sollten die Dämpfer von Bambo Lab auch unter meinem Prusa XL. Damit das ganze einfach zu…
This is a replacement rubber foot for a Blickensderfer 5 typewriter. It might work with other Blickensderfer models, but this was only tested with a 1909 aluminum Blickensderfer 5. I initially created cylindrical feet, and then added some…
Should be about 3x as long as the original, for narrow FOV webcams Print Settings Rafts: No Supports: Doesn't Matter Resolution: 0.2-0.4 Infill: 20 Filament: PolyMaker PLA Category: 3D Printer Accessories
Accent piece for 2005 new series dalek from Dr. Who. It goes on the shoulder section and surrounds the gunbox
this is a bone conducting mask created using an mh-m38 and a bone conducting transducer which is attached with a magnet for mobility links below: mh-m38 Bluetooth receiver:…
I created this from a picture of my grandparents to give to all of there kids.
Bracket for mounting a Boyer Bransden electronic ignition unit a Norton Commando‘s front bracing tube. Assembly Thread a zip tie through each slot on the bracket. Attach 50 mm wide self-adhesive Velcro to the top of the bracket and the…
Add brass M4 nut and long screw. Recommend to use brass, this will not damage the point of the steel pin of the machine! Simple print, optimize for strength. E.g. PLA is strong at room-temprature, but not so stiff. Add steel 2mm pins in…
Models for printing new, replacement keys for the Blickensderfer typewriter. Models of the resin-key type that was used on these, with legends for English (US) in both Scientific and Universal layouts. A Blickensderfer typewriter may miss…
Same length horizontally, but shorter vertically. Print Settings Rafts: No Supports: No Resolution: 0.2-0.4 Infill: 20 Filament: PolyMaker PLA Category: 3D Printer Accessories
Adjustable bracket for installation of MS-13 linear transducer (or similar) onto Airbus A320 OEM sidestick units. The bracket is generic to both left-hand and right-hand side sticks as well as both pitch and roll axes. The following…
This is a representation of the acoustic component of a helicopter dipping sonar. It is currently used by the U.S. and other navies. It is designed to be hung by a string, but can be placed on a flat surface. I have included folded and…
Boost the realism of your sim racing rig! This set includes specialized mounting pads and brackets designed to install the popular Dayton Audio BST-1 bass transducers onto aluminum cockpits (rigs) constructed from structural profiles. Two…
Mount designed for the Lowrance Skimmer transducer for my Hook 3X fish finder. Construction adhesive was used to glue the 3D print to my Jon boat. I also provided the step for anyone that wants to change the mounting and remix.
Model to print a replacement platen knob for a Blickensderfer typewriter. This type of knob for 5, 6 and Featherweight models. Part is designed to take a hex-nut. To fit on original platen rod, a UNF 8-36 hex-nut can be pressed in and…
https://github.com/Samuel-MIT/transducer-holder-for-focused-ultrasound-MOUSE-CAP This transducer holder was designed by Samuel Hansen and implemented in the Shan Lu Lab at the Chinese Institute for Medical Research (CIMR) in July 2026.…
This is a representation of the acoustic component of a helicopter dipping sonar. It was used by the U.S. and other navies for many years. It is designed to be hung by a string, but can be set on a pad for display on a flat surface. I…
This puts the transducer under the hull without hanging an arm off the side of the kayak. It clamps through a scupper on one long M6 screw, and you tighten the wing nut from inside the boat instead of lying under it. Four printed parts.…
Created this simple spacer model for my dads Summit Fishing transducer pole. The spacer allows the shaft to turn freely, while preventing wobbling. While I have added a few standard lengths, we ended up going with the 100mm spacer for his…
A breeze to print (PETG recomended)) and an absolute blast to assemble—just like LEGO! My kid wanted to help, got so hooked, and ended up demanding to assemble the whole model himself!
Helix 7 cone transducer holder for ice fishing portable unit. it was printed from pla+ but hasn't been field tested.
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
Italic English layout typewheels for the Blickensderfer typewriter. For scientific keyboard number 440 or universal keyboard layout wheel number 497. Recommended to print on an FDM printer with - a small nozzle; ideally 0.2 mm - small…
3D printable topographic miniature of Meinsdorf - 🇩🇪 Germany Capture the beauty of Meinsdorf 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 51.911, 12.253…
3D printable topographic miniature of Varnsdorf - 🇨🇿 Czechia Capture the beauty of Varnsdorf 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.910, 14.622…
3D printable topographic miniature of Varnsdorf - 🇨🇿 Czechia Capture the beauty of Varnsdorf 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.911, 14.624…
3D model of the DOTM axe for Optimus Prime Leader Class. The printing instructions are included in the 3D file. The 3D
Mount for Garmin fishfinder transducer. I realize this mount with PETG 100% infill
Many light aircraft pilots in Europe use a tablet computer running SkyDemon to display a moving map that shows current position with flight planning data, airspace restrictions, NOTAMs and traffic detected by a Pilot Aware or other EC…
3D printable topographic miniature of Meinsdorf - 🇩🇪 Germany Capture the beauty of Meinsdorf 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 51.911, 12.253…
3D printable topographic miniature of Varnsdorf - 🇨🇿 Czechia Capture the beauty of Varnsdorf 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.910, 14.622…
3D printable topographic miniature of Varnsdorf - 🇨🇿 Czechia Capture the beauty of Varnsdorf 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.911, 14.624…
