2,476 models
Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
The makers of Diablo IV have shared their amazing 3D model with me to make one of my stop motion animations which I have adapted for print and have kindly let me share this beautiful model with the community! I can't wait to see your…
Print approx. €11.92–€14.56 excl. taxPreliminary estimate for one variant
The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Updated v2 : The box around the people was a bit off center top to bottom. It has now been fixed. After messing around with some of the other The Office signs, none of them were quite right. Here is my attempt at creating the The Office…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
- ENG - This is my first print I upload to Printables.com, it's a simple and minimal USB holder that has 8 USB slots, I didn't find anything I liked online so I created it. The USBs have an offset of + 0.4mm on each side to prevent them…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Emergency office paper clip set You can choose from four sizes S (3 cm), M (4 cm), L (6 cm) or XL (8 cm). They're not perfectly strong like their metal counterparts, but they'll work as emergency paper clips and you can print them out in…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Desk organizer for storing pens, scissors, sticky notes and other stuff. (W)150mm x (L) 120mm x (H) 100mm.
Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant
This is a pendant design inspired by the logo of Elden Ring video game. It's made With Cinema 4d and exported as an .stl. The default size should be around 8cm (3 1/8 inches).
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
The three interlocking gear shaped holders are held in place by a frame at the bottom. The whole office organizer is print-in-place and no assembly is required. Beside its functionality this design also shows the possibilities of 3D…
Print approx. €20.62–€25.20 excl. taxPreliminary estimate for one variant
Hello, joy to the office sign. Thanks for your download, enjoy the print!
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
This also fits above the thumb screw of the filtration unit.
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
This side box was inspired by the side box that has been a popular on 3D Printing upgrade but with a Halloween twist. The PRUSA-WEEN Coffin can hold; 2 Slots for SD Cards Space for Allan keys and other small tools Designed in Solidworks…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for one variant
Jednoduchý stojan na mobil a Iqos zařízení do kanclu.
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Since this model uses bridge infill as the door texture, it's recommended to use Classic instead of Arachne. I provided models with NO shelves and also clean fronts so you can do your thing.
Print approx. €5.76–€7.03 excl. taxPreliminary estimate for one variant
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
Print approx. €17.21–€21.03 excl. taxPreliminary estimate for one variant
The castor is from the Guitel brand specifically for office chairs with a universal stem, The repair was necessary for two reasons, because some of the wheels on my chair stopped turning and the appearance no longer looked as if it were…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Coffin box H:123mm W:73.5mm D:46mm (with lid) For goth, alt, spooky or halloween house decor or gift box. Printed with prusament galaxy black PETG on a prusa mini. First box: 100% scale Second box: 120% scale with negative volume text
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for PETGSource material: PET
My prints are massive PETG to cope with the weight on the small surface. Haven't tried infilled variants yet.
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Classic office lamp - 3D printed parts (include springs) and IKEA STRÅLA Cord set. Print instructions Printed with Fillamentum CPE neon filaments - pink, yellow, orange. STL: https://www.myminifactory.com/object/3d-print-65003
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Plain & simple; a raised multicolor sign for your office or workshop that is meant to parody a ‘Sensory Deprivation Chamber’ sign. Enjoy, and let it be a reminder that its good to take breaks every once in a while. Recently revisited with…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
Tento model zahrnuje pouze rakvičku složenou ze 3 částí. Víko lze dobře zacvaknout na rakev (ale je potřeba vyzkoušet - každému to může tisknout jinak). Křížek zacvakne do víka, ale je lepší použít lepidlo. Na ukázkové fotce jsme použila…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Coffin Cookie Cutter Introducing the all-new Coffin Cookie Cutter V1, measuring 5x3 inches! This revamped version comes with an exciting twist - we've omitted any pre-made designs, giving you a blank canvas to unleash your creativity.…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
YubiCoffin To serve and protect. A simple and well-working casing for your YubiKey 5/5C hardware keys. Just print it directly on the build plate with no supports. Or be cool, add a pattern on top, and print your model in opposite…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
I make a makeup organizer for my partner. If you would like a pile of small coffins to hold your stuff on a small patch of cobblestone then this is the print for you! If you have any questions feel free to ask!
Print approx. €18.12–€22.15 excl. taxPreliminary estimate for one variant
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
A small garage made for the 1:24 Skoda Octavia model (https://www.printables.com/model/762153-skoda-octavia-124), but you can use it for any prints with similar sizes. For the main body of the garage, I've used 0.3 mm layer height, 15 %…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Quintet in F Tray-packing puzzle by Stewart Coffin (STC #253) Fit all five pieces into the parallelogram-shaped opening. Quintet in F is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
With its beautiful minimalist design, this desk accessory fits almost anywhere. Don't let tape, paper clips, pens, and sticky notes take up valuable work space. This versatile desk accessory holder holds sticky notes, tape, pens, and…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Officer Earl Devereaux From Cloudy with a Chance of Meatballs.
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Supports: Yes Resolution: 0.2 mm Infill: 15%-20% Brim: No Printed it with my Bambu Lab X1 I took the STL File of the Frog King cut off the crown and took the STL File of the Police Hat a put it on top. Made it in my CAD.
Print approx. €5.18–€6.33 excl. taxPreliminary estimate for one variant
Toilet sign - My office two colour print
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
It is a stand for the official Lightstick of (G)I-DLE. It was printed in white PETG. The lightstick fits in with the ribbon.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: 2/09/2024 Updated the Top, Middle, and Bottom interlocking nameplate holders (INH). Files are: TOP INH-7.stl, MID INH-7.stl, BOT INH-7.stl I removed the embedded TOP,MIDDLE,BOTTOM text and replaced with a simple up arrow ^ in the…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Don't you have anywhere to hang your jacket at your workplace? The jacket holder helps you to hang up your jacket easily. I printed with on my Ender 3 Pro with PLA (25% infill). The printing time was approx. 1 h 20 min. The gap is 20 mm .…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This will allow you to mount a 120 mm fan above your PCI slots for extra cooling. I use a 2mm bolt to attach the bracket to the case as that is about the size of the slots on the case. The bracket will accommodated a fastener that is up…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Print approx. €6.58–€8.05 excl. taxPreliminary estimate for PETGSource material: PET
No supports ? Yes, no supports. So this is one of my first model that i made. A Bell worker that i know wanted to show the cool things 3d printing can do so i made it for him. Since this is a big brand logo don't sell it. Like, i am not…
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant
laden sie eine Halloween Projektion zb. von YouTube
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Pull the metal stud out of the wheels and press into the feet. Printed with: 0.15mm layer hight, 6 top and 5 bottom layers, 30% infill and 3 parameters.
Print approx. €9.18–€11.22 excl. taxPreliminary estimate for one variant
Replacement part for Ikea Millberget office chair. My chair is old and wheels broke off. This replaces the wheels at the same time utilising metal shaft that used to hold them. Attached gcode is slightly faster than normal 0.3 profile,…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
See my "Awesome Office Door Sign" model for description on this model. Please review the included READ ME doc. for further printing info. Please post your make with the “Post A Make” button (below the “DOWNLOAD” button) on this page :D
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Small nozzles for mounting new 50mm IKEA Paragraf spare wheels on old office chairs. The Paragraf spare wheel shafts are now 10mm instead of 11mm diam. Using these very small nozzles, it was possible to mount new spare wheels on old chairs.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This simple stand is designed in Fusion360. The design of this organizer/stand is flexible space to accommodate pencils but also business cards and other paper notes. In the end it looks in this color like chocolate bar. I printed it on…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
Best be printed in PLA to nail the overhangs from the tire studs. No support needed in this case.
Print approx. €2.60–€3.17 excl. taxPreliminary estimate for one variant
Organize your workspace in style with this minimalist pen stand, designed for quick and easy 3D printing. Printed in vase mode on an Ender 3 in just 45 minutes, this design is perfect for anyone who wants a fast, functional, and…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Description This model is designed to work with my holder design for a customizable office nameplate. Print 2 feet, and insert into the nameplate holder to use it on a desk, rather than a wall mount. Recommended print settings: Material:…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Het gaat om een klein pinnetje van 5.5mm doormeter en 20mm lang. Stelt dus echt niets voor, maar mijn koffiezet werkt weer. Tijdens de afwas is het steun pinnetje afgebroken dat de koffiefilter op zijn plaats houd. Ik heb dan waar het…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Heavens Offical's Blessing : Xie Lan and Hua Cheng
Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
A 3D printable Voronoi pencil holder. Keep your pens and pencils in one place with this stylish Voronoi pencil holder. The Voronoi cell structure gives this holder an elegant look and translucent features. The model is easy-to-print,…
My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…
The official case for The Everything Presence One - available to print for yourself! Featuring a stand that allows for mounting in all directions, holes for wall mounting, cable passthrough holes and a completely tool-less design allowing…
Tired of receipts, dust, and other debris clouding your workspace? This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings. This print features a fully functioning built-in…
Official metric remix of Maff's amazing Netwonian reflector telescope nicknamed “Hadley” . Make sure you go and read his Printables post too, as well as the #hadley-instructions channel on his Discord server , as it includes some extra…
A modern but timelessly designed small office organizer for pens, letter openers, scissors and all the stuff that would otherwise fly around on the desk. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
REUPLOAD from official Flashforge Wiki! All Rights at Flashforge! The Files for the official AD5X Enclosure as 3mf File. Print at 0,4 Nozzle , 0,2 layer, min 15% infill and PLA. Works and looks great.
Amaze! Amaze! Amaze! Straight from the 40 Eridani system (and the official movie website), I have collected and optimized the official Rocky STL files for us leaky space blobs to print at home. While the original files are incredible,…
The hidden latching mechanism will only unlock if you discover the twisting top section. Customization Base designs Plain Tapered Topper designs Plain Skull Scratch Skull and Scratch Spider Choose between 2 base designs (tapered or plain)…
Coffin Storage or Light Box. Works as both Each one is made of 3 parts that snaps into each other. No AMS needed Print the cap part face down. For the “colour” part i recommed using PETG. It has a edge that snaps inside the cap part. You…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
Bring warmth and personality to your desk with this Sweater Man Pen Holder, a cute and minimalist 3D printable desk organizer designed to blend functionality with modern decor. Inspired by cozy winter sweaters and clean Scandinavian-style…
Here you got is the first Deltaprints desk organizer designed with an integrated smartphone holder, compatible with all common phone sizes. It features multiple compartments for pens, office supplies, keys, or any little clutter that…
This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs I used for the light box…
SIze cca width 152 ( C,F 172) x depth 60 x height 93mm. Wall depth 3mm. Holes for pencils (C, F) size 16x15,5mm. For papers size 90 x 90mm (use not glued papers). Tested 0,2mm, 2 wall loops, 15% infill. Filament need cca 40-60m. Other…
Organizer Office Compact, easy print without support. Short and Long versions with and without drawer. Size vesion With drawer: Short version lenght x width x height 115 x 103 x 135mm, Long version 155 x 103 x 135mm. Size Without drawer:…
Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the community. Thank you!…
A Stand for "Official Diablo IV Lilith Head" You can click it in the Original Model Printer : Artillery Sidewinder X2 layer height : 0,2 line width : 0,6 Scale 100 % - 214% infill 20% ; print time ~ 15 min & 60min “ NOTE ”…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . The design of the bracket is ventilated for actively cooled units to be installed, independently from the orientation of the intake fan. The bracket is also compatible…
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
Printed at 0.35mm height with 0.6mm nozzle on mk3
AD5X logo insert, can be printed in different colors separately from the enclosure parts. This will save your print time and avoid poops from multi-color prints. This model has tight tolerance and can be press fitted into the original…
◾ Don't forget to share your work with us 🤗 ◾ Size: 20cm / 7.8 inches in wıdth, 10cm / 3.9 inches in height, and 0.8cm / 0.31inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately.…
This thing is a reference model of the Official Raspberry Pi 7" Touch Screen Display. The parts modeled in this thing are available here: *This site contains affiliate links for which I may be compensated Official Raspberry Pi 7"…
Official Thread Boards website: www.threadboards.com Organize anything with our innovative 3D printable threaded peg boards with a twist. Easy to print, high quality STLs. Thread Boards helps you organize your stuff in a fun and easy way.…
A miniature swivel office chair. NO real adjustment functions. The seat should be rotatable if assembled correctly. Wheels (casters) are supposed to be spinnable too but tiny printing issues could obstruct that. Default size (assembled)…
Hey there! Chances are, you're the proud new owner of the Pulsefire Saga or Pulsefire Saga Pro (or maybe even both!). We wanted to provide you with the STL and STP files for your mouse's out-of-box parts as well as some bonus shapes and…
Official Flashforge AD5X Dry Boxes for Mounting on the Printer, or Standalone. Use the PDF or YouTube Video for Instructions.
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
Halloween Cookie Biscuit Gingerbread Cutter (approx 45-50 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
These were designed to have a flat back, thus make them mountable on flat surfaces using the appropriate adhesive. The height as it lays on its back is at 6.5 mm. The width is between 102-115 mm. The Length at 176 mm. I recommend the…
This 3D printable, cool, abstract pen holder is a perfect addition to any desk, bringing both style and functionality to your workspace. Designed to print without the need for supports, this pen holder makes the printing process smooth…
This dice box is shaped like a coffin and intended to hold 20 d10 dice, which is the standard set for Vampire the Masquerade 5th edition. The folder contains clan lids for many clans. Use an M600 filament swap at a layer height for two…
pay attention If you use the adapter, the lid of the AMS can no longer be closed.
56 Room Signs Like "The Office" Logo These are residential room signs designed in the style of the logo for "The Office" TV show. Please post your makes so I can see which signs/pictograms are the most popular. Dual Colors with a Single…
Five Nights At Freddy's 1 office. Yeah… this is a model of the old Five Nights At Freddy's office. Print with PLA or PETG it's just up to you. Model size 125x110x100 . Stick the parts with some kind of glue . The posters and textures you…
Modern and clean-lined office organizer set with tray and pencil cup. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧…
Easy printable. It can be printed without support. Size big version lenght x width x height 106 x 86 x111mm. Filament need (big version) cca 52m (0,2mm, 2 wall loops, 15% infill). In 4 versions with and without cards holder and in big and…
Who has an office these days? Keep all of your bits and bobs with you as you move from worksite to worksite. This compact organizer features: Work phone storage (95 x 168 x 15mm) Phone stand / storage cover Credit card / money / business…
11/07/2024 Corrected screw thread and added STEP file 10/07/2024 Added STEP file of the official Case Freely printable cover of the CMF Phone1 smartphone where I also added the screw at the bottom right. It can be used to create…
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
