Counting matching models…
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way. This one : 42 Coin - Two Color Note : This is a remix of my previous 42 Coin - the difference here is in the two color printing with…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Edit 3/12/23 0800. I think I finally got to a version that prints without a bunch of weird settings and crazy supports. This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.…
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Print-in-place detailed snake. A variation of my “Articulated Snake with Scales”. But this one is an articulated version of stronghero's really cool rattlesnake design that I wanted to try to articulate. I think it turned out pretty good,…
Inspired by the camera mount by johanncc ( https://www.printables.com/model/146877-voron-0-voron-01-raspberry-pi-camera-mount ), I set out to modify his model to fit the RaspberryPi camera module 3. My modification caused the camera to…
This bathroom arranger is a remix of this one: https://www.thingiverse.com/thing:2144322. (It was published before I had my own acc.) It has deeper holes for holding and also more things to hold. This holder is without the 'Tooth Brush…
I created a material library file from Creality's suggested settings for the 22W Falcon2/ Falcon2 Pro. I have the Pro model but I am guessing the settings are the same among both machines. You can open this file directly in Lightburn.…
The Falcon2 Pro laser cutter & engraver is a great machine. But they really botched the bed of the machine – the slats are a horrible, wobbly mess! So any engraving with fast Y-movement will jiggle the workpiece. Especially bad if the…
I haven't got to print this model yet as my printer is still a WIP, but it should be printable without support as the original design. Case can be printed using Voron PIF standard, but I recommend printing the bezel and accent with finer…
Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Transparent Black Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 50% cubic Rafts: No Supports: No Gedruckt wird flach und nicht hochkant. Zum kleben verwendet man am besten…
It is better to print it with structure, and besides the neck is very small so when you print it give it a layer of glue
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
My main electronics board for Mr. Baddeley's Mark III astromech (R2-D2 and the like). This board is designed to use all the standard parts plus Adafruits 16-Channel PWM servo driver boards. It has mounts for the following: Arduino Mega…
This model may be useful as a stopper if you vertically expand voron2 Z-axis or add the extra top hat, otherwise you don't need such stopper. BOM: M3 x 8mm BHCS M3 T-nut
The brackets of our Focus Thron2 eBikes broke and I needed a replacement. The bracket comes with a small slot to guide the cables through so you just need a few minutes to replace it without disassembling the plug. Use a knife or gentle…
Since most wood is warping and sometimes gets moved by the Air Assist, I tried to find a solution that works with the aluminum bars from the Falcon2 Pro. This material holder comes with a glider and a holder. The glider slides onto two…
These spacers allow you to position a 400x400mm MECPOW honeycomb bed relative to the feet of the Creality Falcon 2. The outside dimensions of the bed are 440x440mm The bed is also raised a few millimeters to allow fumes to escape under…
You can use this model either as a stand alone mounting solution for your DIN-Rails or as an ad-on for more stability. What you need: 4x M3 T-nuts 4x M3x12 Hex Screw Keep in mind: Your deck panel must not exeed a thickness of 3mm and your…
The upgraded model also makes sure that the origin of the machine is in the corner of the honeycomb.
Falcon2 Pro Collection A TPU brace to hold your slats in place so they don't shift around when putting material on the bed to cut precisely. Print two sets to fully cover the slats in any orientation. Print as oriented. Default FLEX…
DJI Action2 protective case. Resistant, lid stays closed Cam fits perfectly, but since my printer usually need to add 3% to fit original sizes, you may need to reduce by ~2% to get e perfect fit, or you may end up with a slightly larger…
## New changes in Version2 (this version) VS version1 (Version 1 https://www.printables.com/model/971423-ercf-v2-selector-mod-for-larger-28mm-17g-servo * In version1 servo arm cannot touch the filament block top hat to release brake. The…
A part to hold the M5 nut for the gantry bolt so it can clamp to the metal gantry extrusion. Assemble steps: 1. Add 3 M5 nuts to 3 holes in the model 2. Slide the cube inside the hollow extrusion 3. Slide the bolt in (You will need to use…
Early prototype v.0.8. :) Note: I've only printed this as a draft, using PETG, with support everywhere, 0.28mm layer height, DRAFT mode (Core One). The result is a bit rough, 4 hours print. Next move: Try to make more of a “yoke”-version…
BIGTREETECH Mini12864 V2.0 mount for Voron2.4 / Voron Trident
Hey guys! Porygon2 is one of my favorite Pokemon, so I thought I would model it up. Porygon2 is the second evolution out of three. First is Porygon, then Porygon2, then PorygonZ. Porygon2.stl is a model of Porygon2 looking straight…
thought 120 characters was a bit short for description…. So this is a customisable sword, and is designed with a 13mm channel running through the blade and handle so that you get strength running through so you don't have to worry about…
This is a mount for the physical Y Endstop on Sovol SV08.
This is a remix of Voron2 XY joints. The original mounts are applied for 2020 extrusion. This remix was applied for 1515 extrusion with an addition of the M3 screw and the heatset holes to fasten tightly the upper and the lower mounts.…
Given space limitations for my printer, I set up a spool holder that mounts above my printer. This meant the stock bowden tube holder was always slightly awkward to route the bowden tube properly. So this turns it 90degrees so the bowden…
Voron2.4 Skirt Mod Power outlet
To replace the cover in poor condition, loosen the retaining screw and remove the old cover. Keep the retaining screw for the new cover. Place the new cover in the hole and tighten the retaining screw. WARNING !!! This model can cause…
Falcon2 Pro Collection I had smoke creeping out the crack between the exhaust hose adapter and the side of the enclosure as well as the hose connection where the wire wraps. I replaced the fan grill with this foam gasket cut from 2mm…
Outlet elbow for smoke extraction laser Creality falcon2 Pro, fit on fan. Design for better air flow. Petg, 0.4 or 0.6mm nozzel, layer 0.2-0.32mm, supports
Designed an alignment job for my Creality Falcon2 laser cutter. Provides about ~6mm (¼") offset from the plastic to where the laser actually hits (laser + PLA/PETG) = BAD. Includes posts to ensure minimal movement during alignment.…
Falcon2 Pro Collection This is a door exhaust port I use for my laser cutter/engraver which uses a 75mm/3" hose. My door is 44.5 mm thick. You will need to print this: door_exhaust_port and one of these sets exhaust_director_short or…
Falcon2 Pro Collection This is a set of half fan intake shrouds to help the laser unit not pick up particles from the surface being worked on to minimize build up in the cooling unit. Creality does provide instructions on how to pull the…
Simple camera mount for Voron no supports needed Necessary screws: 3x M3x8 1x M3x20 2x M3 hammer nut
My NICE remote didn't came with a wall supoort so i made one :)
Falcon2 Pro Colletion This is a bracket that can be used to build a shelf that sits on top of your Creality Falcon2 Pro enclosure to provide some extra room for a laptop or the like. Two files - one with holes for rubber feet , one…
Credit to @pungo120_829133 for original design and @DoubleT_128870 for the 9mm/backer versions.
Zum halten werden nur zwei Kabelbinder benötigt, positionieren nach Wahl. Print information: Printer: Prusa-Mini Filament: Prusament PETG Galaxy black Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 30% cubic Rafts: No Supports: No
a 7" Rpi sceen mount for Voron2.4 with doors Joint holes are 1cm offset from original to fit doors when tilted vertical
Since most wood is warping and sometimes gets moved by the Air Assist, I tried to find a solution that works with the aluminum bars from the Falcon2 Pro. This material holder comes with a glider and a holder. The glider slides onto two…
This is a quick remix of Dalton's feet for the Dofiki 500mm honeycomb bed. It is slightly larger than the TwoTrees.
Newer version, with modifications 80mm long version for LMShow
4x M3 heat set nut 6x M3x8 SHCS 2x M3 T-nuts The siboor kit includes a fixed mount. I felt that the touchscreen would be easier to use with a mount can tilt.
Yep its a block use 2x 8mm M2 bolts.
PETG 50% infill
Voron 2.4 Side skirt A (250, 300 ,350) power switch added
This is an alternative housing and placement of the Nextion24 LCD screen used for Nextion based Gaggiuino. The housing has an an opening for the SD card slot at the bottom and attaches to the cup warmer plate by magnet. The two small…
This simple adapter piece fits within the Katsu / Makita trim router plunge base, and allows you to install templating collars, I've used this with a 18mm templating collar. You may need to slightly sand the edges as its pretty snug…
Model of Maison203 heart brooch. PRINT AT 2834.65% SCALE! To attach it to clothes, I superglued a coin on the backside. Now any neodymium magnet can be used to attach it.
Voron 2.4 Bed Alignment Stops are accessories that help accurately position and repeatably align the build plate during installation. These stops mount to the printer frame and provide consistent reference points for the bed, making bed…
This is Version 2 of four pig prints as follows: V1 : plain pig V2 : piggy bank #1 with slot only V3 : piggy bank #2 with slot and bottom opening V4 : Matryoshka pig(s) All versions use the same basic design, with some significant…
This is a head-base that can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. The model is a variant of my other bear head model. I did not make a hole for the jaw hinge because it makes it…
This is a Maine swing motion style truck that has been narrowed for custom HOn2 wheelsets. Will not work with N scale axles. Category: Hobby
This is the single color version with separate prints. You print the body and the hearts separate, then glue the heats in the coaster. Print instructions For the hearts I set the "Elephant foot compensation" to 0.2 mm. (The tolerance…
This is 25 degree mount for any GoPro-like sized camera for Peon 230. You can directly screw this to the top plate using the existing holes. You can also add rubber dampers inbetween the mount and the top plate to decrease camera…
Scroll down for the french translation… “ AMOUR ” als druckbare LED- Namenslampe. Version 2 mit LED- Herzen. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA…
This is a head-base that can be used to build a puppet-, plushie-, robot- or even a fursuit-head. Fake fur can be glued on. I did not include the lower jaw because It's faster to make one with an aluminium-profile when to print it. I just…
Artika Monsoon2 soap tray shelf replacement from costco
Print left side joint from original source.
Set slicer; Loops to 0, and Elephant foot compensation to 0 (why this is a Default is beyond me!) and fist layer height to .2mm. Import PrintDry-ClipV2.step into prusa slicer. Right click on PrintDry-ClipV2 and “Split to Ojects”, Slice…
English: Simple and efficient magnetic clamping system for "Creality Falcon2 Pro" bed. Instructions: Purchase 10 mm cubic magnets. Print the clamps that match the thickness of your material. Attach the magnets to the base of the clamp…
Spool holder for 20x20mm aluminum profile. Designed for a Voron 2.4. Can hold 2 spools up to 9cm. Has a little filament guide at the back which holds your ptfe tube if you want (optional). Requires: some m3 nuts an bolts two t-nuts ptfe…
Per raiser you need: 2x 6mm nuts 1x 6mm x 20mm screw After inserting the nuts and the screw (be gentle) you can just click or glue the two parts together. Print with support. If you want to support me: https://www.paypal.me/letusgo2hell
Bom: 23 x M3 x 8mm (maybe 8-10mm fits too) 23 x M3 Hammer Head 3mm diameter: https://de.aliexpress.com/item/1005002559740906.html Matched this Z-Belt Covers: https://www.printables.com/de/model/479809-voron-24-z-belt-covers Link to the…
Better mount for gopro and dji action2 like cameras. Mount for GepRC Cinelog 35 Performance Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.22 Infill: 100 **Filament:** F3D TPU…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover. The design includes ventilation slots for heat dissipation and mounting…
Diese Halterungen für Induktive Switches können individuell an allen Varianten der MPCNC PRIMO eingesetzt werden, unabhängig davon, wie der Aufbau gestaltet wurde. Aus meiner Sicht sind induktive Switches ein MUSS für alle, die wirklich…
This is part2 of voron 2.4 M4 screw mod. In voron 2.4 original design, M5 screw is used as standard, however I believe M4 screw is strong enough. So using M4 for the xy joint parts. original part name is…
this model il is using a 12x 16 mm rail to mount a camera using the enclosure tubular structure. the 4mm holes are designed for 3mm insert. to secure the assembly
It was a pity that some space was lost in previous cartridge ( https://www.prusaprinters.org/prints/4813-cartridge-for-3ds-games-ds-games ). Designed a double decker for the used games without game case. Cartridge fits in the slots of…
need to work with other parts from this design. https://www.printables.com/model/659369-voron-24-purge-bucket-silicon-brush-wiper bracket is modded from original design from here:…
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way. This one : 42 Ball Note : Alternatively consider printing just the "42 hemisphere" - looks interesting sitting on the desk. The idea…
This is a support mount to increase stiffness for the following CNC gantry of 250mm Voron2. I recommend a longer version of the mount if you don't mind that the weight increases and is close to 1515 alminium extrusion' weight. You can…
This is a 3D-printable enclosure designed to house a Victron2MQTT PCB and a Wemos D1. The case consists of two parts: a bottom housing and a snap-on top cover, making assembly easy without the need for screws. The design includes…
I sometimes like to play with my controllers laying on a table or desk, and I didn't care for the natural angle the Switch 2 JoyCon2 Grip leans down and away. After modeling a few variations, I also realized this could look like a tongue,…
Die Modelle eignen sich um Wellen für den 3D Drucker auf eine definierte Länge zu kürzen. Benötigt werden 2-3 Kugellager (F695 Bearing) die in die Vertiefungen eingesetzt werden. Die Welle wird durch die Löcher bis an den Anschlag geführt…
Looking for a solution to covering the voron2.4 that was removable and not intergrated to exisitng frame also i am a fan of the simplicity of the top mount roll and having no bowden tube. This new frame is located by the Binding plates…
Falcon2 Pro Collection This is a bracket to hold a Wyze V4 or V4 camera($20-30 off Amazon) in place to observe your cutter remotely. The Wyze software to view your camera is free. I wanted a way to keep an eye on my cutting while in other…
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way. This one : 42 Stamp This print has two parts - a handle and a replaceable "stamp head." The idea was to create a generic stamp design…
Falcon2 Pro Collection These are instructions as part of my Falcon2 collection. The model is just a placeholder. I needed to ensure my laser head is perpendicular to the surface where my material will sit since I plan to cut pieces of…
La déjà célèbre "tortue sagace" buvant son lait fraise. The famous "Wise Turtle" drinking his strawberry milk. #LFI #Melenchon2027 #Tortue #Tortuesagace Utilisation d'une instance locale de stable diffusion pour générer les photos de…
Because the origin file is design to mount on left frame and the mount hole is not M5. Cannot drop in replace the official spool holder. I just modified it so it can drop in replace the official one. The 90/100mm roller can use the origin…
This grip attachment makes the Nintendo Switch 2 Joy-Cons much more comfortable to use individually (“split mode”). By clipping onto the left and right Joy-Con, it adds a more natural handhold, reducing strain and making gameplay feel…
(Original design from here: https://cults3d.com/:1323209) This is a re-work of the “Creality Ender 3/3Pro Part Cooling Fan Duct” by KingYS Significant effort was made to re-shape this and rework the mount to be compatible with the Mizar S…
This set is dedicated to use with conversion frames like this item from AliExpress . If you have enough building volume you may print a single frame with mounting ears. My 235x235 building plate is too small to do it. This was a reason to…
Dérouleur de papier toilette avec réserve, modulable vous pouvez ajouter autan d'étage que vous le désirez.
Keep your workspace clean and your filament dry with this custom-designed, low-profile mounting tray for the Elegoo Centauri Carbon (CC2). This modular system is engineered to securely hold four standard "cereal container" style filament…
Documentation (still WIP) can be found here: https://www.makerbizwiki.com/index.php/Projects/JPs_Projects/FiberBalloon2020 LED Rings can be ordered here:…
DEFCON27 I Want to Believe badge - Alien Case for the PCB boards I made for DEFCON27 Print instructions Unassociated tags: alien case, badge case, badgelife case, i want to believe Category: Containers Print Settings Printer Brand:…
J'ai créé ce modele de support de brosse pour voron 2.4 car je n'en ai trouver aucun qui me permettait de fixer la brosse de buse sur l'avant sans que cela gêne la mise en place du nervermore. de plus tout ceux que j'ai essayer mettait la…
A simply drill and cutout template for the B&G Triton2 or Simrad OP12 autopilot controller. The template are wide enough to show the area used by the device included the suncover. Category: DIY
mount action 2 with tpu 30 degree for apex fpv frame
Put some storage on the board with the Hextraction2Gridfinity Tile! This design is a mashup of Zack Freedman's Gridfinity (the modular storage system) and Hextraction (A hexagon shaped, marble rolling board-game) tiles. Prints in two…
