Counting matching models…
Print Base in PLA with 5 or more perimeters for optimal stability. Print Foam pieces from TPU. I used VarioShore at 240 °C. Assemble with 2x M5 threaded insert and 2x M5x25mm cylinder head bolts.
This purpose of this optocoupler case is to provide an easy upgrade path for those who want to start with the Arduino Gaggiuino build in a Gaggia Classic and then upgrade to the STM32 Blackpill. Print this case for use with an Arduino…
A 120mm fan mount for the “fanless” Topton N100 router PC. It lets you securely mount a fan without case modification.
Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…
These are brackets to mount a 120mm fan to a Topton N100 Mini-PC. No tools or hardware needed, just clip onto the fan and slide the assembly onto the heat sink grooves. The Topton N100 ran great - except for the fact it overheated and…
I have a CWWK Mini Fanless PC running OPNsense firewall. It gets a little warmer than I'd like with no fan, so I designed this mount to hold a fan on top of the heat sink case. The case supports an 80x10mm fan on the bottom, but the CPU…
Dual trial lens holder for standard optical trial lenses. Prints in two pieces that can be glued together. Update: Added 1pc model
Right rack mount for Topton N100 i226-V Mini PC that takes only single 1U. One original bottom screw replaced with M3x40mm. Holds device in place. Printed from ABS with 0.2mm layer, 40% infill, 4 perimeters, 5 top/bottom layers. Design…
Schreibtisch- Handy- Organizer für das perfekte Büro. Die Handyablage mit einer ergpnomischen Schrägstellung, besitzt eine Aufnahme für ein induktives Netzteil - Durchmesser 70mm, Höhe 12mm, mit Kabelabgang nach hinten. Zum Beispiel:…
This case is used to mount an ESP32 Devkit1 together with 3mm IR receiver and transmitter (I took them from and TCRT5000). I used the ESP home module from…
Ceiling mount for the OPTOMA UHD50 Projector. Projector bolt positions are taken from the mounting section of the owner's manual and line up perfectly on mine. I printed the top and bottom pieces out of PLA at 50% infill, the gimble piece…
I needed a compact mount to fit a Topton N100 Mini-PC with fan in a shallow structured wiring box. Total height of the Topton plus mount and fan is just under 3" which provided sufficient clearance and airflow. As in the original, the two…
This is basic lens cap for the Optoma GT1080HDR (Regulatory No: DAEHHGNST) DLP Projector. The projector doesn't come with one and could really use one because the short-throw lens sticks out past the front of the projector. It has a…
I purchased a Topton N6005 fanless mini PC, but it runs quite hot, when I have it hidden away in a cabinet. So I designed a very simple fan mount for a 120mm fan in Tinkercad - it is held in place with friction. Print two pieces, mount…
It is an enclosure meant to protect the board from unexpected shorts and make it easier to work with. It is designed to allow access from the top so that the screw terminals can be tightened. You can check out the completed assembly below.
Simple PC817 2 Channels OptoCoupler Enclosure. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Filament: OVERTURE PLA Category: Electronics
this is a 19" 2u mount for the CWWK/Topton Mini PC ( https://nl.aliexpress.com/item/1005005411300587.html?spm=a2g0o.order_list.order_list_main.343.12b279d2PfxrNQ&gatewayAdapt=glo2nld ) for your rack , you'll need 2-4 m3 screws anywhere…
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
Updated CAD below. A adapter to allow the Fungineers stompies and X7 rails to mount a regular TFL drop top fender and lowers too. Print 2. 1 for the rear and 1 for the front. Use countersunk 4x M5x12mm and 4x countersunk M5x20mm for…
CWWK/Topton Affordable Edition Riser Base to accommodate 80x25mm fan at the bottom Combine with ZeroFlow's 120mm Top Fan mount for significant cooling benefits. Results: Stock fanless 48C 120mm Fan only 30C 120mm Fan and 80mm Fan 24C…
Bought this Topton Mini PC from Aliexpress: https://www.aliexpress.com/item/1005004360072281.html Temperatures were higher than expected. CPU needed a shim. If using an NVME drive, it will generate more heat than the CPU. Remade the…
Extends the Case of the China-NUCs so that you can fit a regular 25mm thick 80mm fan additionally to M.2 drives with heatspreaders. Also it is possible to add more I/O to the front and backpanel to make use of the internal headers for USB…
Print two of these brackets if you have a MiniPC with the same aluminum casing profile used by many vendors, similar to the one popularized by Topton, as shown in the picture. Before downloading the model and printing, please measure your…
I needed to mount a fan on my “fanless” mini pc to keep it cool. As reported by the seller on Aliexpress , if you want to do more than just a router, you need to add a fan to dissipate the heat. The fan mount I've found was good but not…
Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.
A 120mm fan mount for the “fanless” Topton N6005 router PC. It lets you securely mount a fan without case modification. Similar to https://www.printables.com/es/model/303732-fan-mount-for-topton-n6005-case but I designed it with holes to…
These supports are really hard to find and they deform easily after some disassembly. So I decided to recreate it.
10 inch version of @Arek 's rack mount for a mini PC with keystone slot and a cutout for the power cable. Printed in PLA+ for my rack, however other filaments that are more temperature resistant are highly recommended. Different from…
A Simple Optometry Trial Frame for 38mm lens. Up to 3 lens for eye. Include Occluder. Updated: Added new frame Version2 with individual spring per lens for a better fit 144mm width frame 66mm PD Adjustable Temple Arm length Tip: fine sand…
FW inspired fenders for the GT spec'd to fit Kagman's printable ADV fender. Enjoy the FW taint FM.
Organize your optometry clinic with these sets of bottle holders! These bottle holder holds are made completely from PLA and match various numbers of bottles and also bottles sizes! The regular 4x2 and 4x1 holds all TPA drops such as…
This is a cover for the Opto-Switch on the Getaway supercharger ramp. They are clipped together so they can't fall off. You can print this without support. Looks best if done on two colors....
Material: PETG, ABS, or ASA Two parts need to be printed: Pegs facing upwards Pegs facing upwards, mirrored along the Y axis No support required 0.20mm layer height You should be able to reuse the original 4 screws to assemble them. The…
The model consists of 7 pieces: 2 mini fenders 1 drop top 4 little connection pieces I recommend printing the mini fenders in TPU, with 5-6 walls and 15 gyroid infill for a good mix between stiffness and impact strength. (my PETG…
This fits on smartmeters with D0 opto interface. As an example you can use a wemos D1 mini flashed with tasmota firmware for forwarding the SML messages to your smart home solution. What you need: wemos d1 mini, infrared sensor as innards…
Got a small space on your desk somewhere you want to confine all your eye drops to? Here's the solution for you! The Honeycomb is smaller than the ADMeyeR series drop holders but will still organize your desk perfectly. The best part for…
The is a 3 point adjustable mount for the Optoma GT1080. http://www.optomausa.com/projectorproduct/gt1080 The projector has such a short throw that it's great for setting on my bed and watching movies on the wall. However, the projector…
Bracket to hold a GLEDOPTO GL-C-008 LED controller.
This is a remix of a PC817 optocoupler mount designed to be used in control boxes or 3D printer electronics enclosures. The original model required a separate DIN rail clip. This remix integrates the DIN rail mount directly into the part,…
Rack I made to hold an old Qotom quad NIC PC I've been using as a PFsense box for years. Designed around the space as the top of “Modular 10 Inch Server Rack - Reworked”, which is technically 1.5U but eats into some of the vertical space…
DIN rail mount for chinese dual PC817 optocoupler board (17mm / 1 part unit width) PCB has common ground on inputs, outputs may be grounded via jumpers. If you are looking for a board without any connections between both optocouplers,…
This is an enclosure for common optocoupler relays including a snap fit lid
I printed with support.
💥 Meet the Mini PopTop Box Get ready for the most satisfying print of the week! The Mini PopTop Box is a fully 3D printable container featuring a clever, integrated spring mechanism. No screws, no glue, and no metal springs required—just…
Optotap filament sensors Upcycle your Optotap PCB building a 2 in 1 filament sensor. This mod combines a filament switch sensor and a filament motion sensor . Bill of materials Hardware qty Notes Optotap PCB 5v or 24 V 1 pin D3 20mm 1 e.g…
This is a quick description on mounting the LJC18A3-H-Z/BX on an Ender 3 as an alternative to ready made kits available on the market. You need some soldering skills and a bit of electro-technical knowledge. If you don't know what you are…
Recently I bought this ingenious little tool. To protect my pocket and also the very sharp Allen key tips of the tool, I designed these litte caps, which are connectet by a strap. So you don't have to worry about where to put the cap…
I bought a WooYi (similar to Topton) N5100 mini-pc/router and while the temps were basically fine I thought it would be fun to add a fan to keep things a little cooler. I wired a 12v 80mm fan to 5v via USB and designed this little fan…
Hello, I needed some low profile projector mount for my Optoma HD143x with possibilities to rotate it along pitch and yaw axis (X and Y). The mount is designed to be printed without any support. I printed it out from PETG but I would…
Upside down Optoma UHD projector holder. Quick design, nothing fancy. For print you need big printer 330mm+. For tilt adjustment you can use M3 heat insets and M3-10mm screws.
Hi all! I recently bought NAS R1, due to it's placement on the floor beetween desk and wardrobe I decided to create simple stand. There are two versions, one with a sharp edge and the other with a round one. On the pictures you can see…
I made a housing for the Gledopto ZigBee Triac AC Dimmer, so i can use it to replace a cable switch for a light, and make all lights that are in a wall socket zigbee dimable and switchable. This way i can move the lights around an not…
Tube and cap for mounting a LED and a photoresistor to create a opto coupler with a LED and a photoresistor (LDR) It has a thread and its very tiny so print at a high resolution. I used .1 layer height Infill setting doesn't really…
I Installed a CPAP blower for my 3d printer. I went the optocoupler route for the meantime (as I am using a thinclient as my klipper host, and working on building the CPAP flap mod). I didn't see too many mounts that I liked so I decided…
This is a fan mount for a Topton Fanless Mini PC. It allows you to mount a 60, 70, 80, or 90mm fan to an X2B (N5105 or N5100 CPU) Model Topton Mini PC. My device, running OPNsense even at only low load, was averaging around ~74C. With…
Jwidess's mount by stretched to fit 120mm fan at most distanced holes
Want to use your Optoma UHZ50 on top of a tall shelf in the upside-down orientation without having to drill holes and mount the projector on the ceiling? Then this stand is for you. If you like what I'm doing, please give it a like 👍…
8-channel photoelectric isolation module Board revisions may vary! Mounting holes 87x64 mm Compatibility: 8-channel photoelectric isolation module 35mm DIN rail Mounting components: M3 screws M3 stand
Swap out those black optical (opto) switch covers on the right ramp with these brick-style covers to make your game more… Labyrinth. Print Recommendations: material: PLA nozzle: .2mm-0.4mm layer height. .12-1.6mm
This is a remix of the Raspberry Pi 3 (B+) / 4 sleeve case designed to accommodate a CP-2102 USB to TTL breakout board , offering a small & compact way to fit into a single case. While I created this model to house a Viessmann Optolink…
This is a from-scratch rebuild of the RoboForce figure Coptor. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
V2 avalible!!!! Changes of version 2: reinforced the base added 2 RJ45 keystone for more easy connect made the hole of DC connector more biggest center the NAS CWWK for more stability the base has been fixed so that the legs support well…
Script for eBZ DD3 2R10 ODZ1 >D >B ; https://tasmota.github.io/docs/Smart-Meter-Interface/#ebz-dd3-obissml ; OD-type: 7 data bits, even parity, one stop bit, 9600 baud (9600 7E1) - OBIS ASCI protocol SerialConfig 7E1 TelePeriod 10…
Box for 30 trial Optometry Lens and box for trial frame Individual printed springs hold each lens avoiding disorder and damage Use two M2.5x10 screw for hinges Printer setting: 0.2 Layer 3 Wall 3 Bottom/5Top 10% Infill Tree Supports for…
Case for a DIY smart meter sensor Inludes holes for a 3mm phototransistor and two 5x5x5mm magnets at the bottom. I also made a large cutout for a ~10mm wide screw terminal. Electronics (german): by Paul Görgen and some Informations (the…
So I wanted to build a compact all-in-one router + server solution for traveling, and this is the best x86-based mini PC I could find at the time being with all my requirements. Although the cpu never goes over 54C, the AsiaRF…
I designed these guards to fit over the led's and keep the ball from knocking them out of alignment. They replace the mounting post sleeve under the plastics. I realized when trying to install the left one that I would have to remove the…
I have designed a compact enclosure for an AZDelivery (Wemos) ESP32 D1 Mini NodeMCU WiFi microcontroller, including space for an optocoupler module and cable clamp for an RS485 Modbus or S/FTP cable. I use this setup to create a…
A adapter to allow the Fungineers stompies and X7 rails to mount a regular TFL drop top fender and lowers too. Print 2. 1 for the rear and 1 for the front. Use countersunk 4x M5x12mm and 4x countersunk M5x20mm for securing to the X10…
Shroud for a 120mm fan. Slides right on top of the case.
Suggested printing in the provided orientation with auto tree supports. Yes, that orientation. You could print it flat (you'd still needs supports), but then layer lines could cause the pegboard “legs” to break off. Use M3 SHCS or BHCS to…
Protective box for the opto barrier (4 channels). It can be used for mounting it on a DIN rail in an electrical cabinet in combination with a clip from https://www.printables.com/model/1063665-din-rail-clip
it was one of the largest kangaroo to ever live during the last ice age despite their are a few species of giant kangaroos and new evidence reveals that they dont hop they walk and run like a t rex for example Category: Animals
I was building my second Vitalii TAP and realized I didn't have any more of the correct opto sensors for it. But I did have a few left over from my purchase of 5 cheap ones a few years ago. So I modified his Wired Optical Sensor Mount.stl…
A printable rack shelf designed to mount a fanless mini PC in a standard rack enclosure. Features 6 keystone jack slots on the rear panel for clean and flexible cable management. Ideal for home lab and NAS server setups. PLA works fine…
This is a remix of the great electronic casing of c_wolsey! All credits go to c_wolsey. I found that the original casing was too small (lacking height) for my purpose. I wanted to insert a Raspberry Pi, a MOSFET module for the heatbed and…
/!\ WARNING /!\ This project is on the back burner for now. Someone else pushed the idea to completion, print his thing instead : https://www.thingiverse.com/thing:3063430 People who have printed this reported some flaws in the design. I…
Brackets to mount a 80mm fan to a Topton N100 Mini-PC. No tools or hardware needed. printed in PETG with supports Category: Computer
Why I was printing the excellent beamer-to-tripod adapter made by Klenzel: https://www.thingiverse.com/thing:2638768 However, the arms were too short to reach the M4 screwholes on my Optoma beamer. This bracket is designed to interface…
I used a WLED controler from GLEDOPTO to control a larger assembly of WS2812. Therefor it is mounted in a control cabinet. For easy access I wanted to have a snap in carrier. Easy to print. Base assembly with 2.5 or 3mm screws Printed in…
For the older version of Topton N150 Fanless computer. It was a tight fit. Dimensions D= 126.76 W =136.51 H= 44.37
Just a really simple model to hold Gledopto's Wled remote. Print as oriented in your filament of choice. Designed to be used with 3M command strips. https://www.amazon.com/dp/B0DDX8DYDK?ref=ppx_yo2ov_dt_b_fed_asin_title
Enclosure for 1-Bit AC 220V Optocoupler.
Lens Cap for Optoma HD36 Projector
Unscrew the 4 front screws of the mini-pc (but leave the cover in place), slide in the mini pc und screw the printed model in. Optional slot for a 120mm cooling fan on top.
This is an adjustable holder for an opto endstop - not only for z-axis! No matter if you use it as an upgrad or for an new printer - you'll love it. And - it can be build within 60 minutes. Post-Printing Parts list Parts to be printed: *…
Improved design to avoid turning on the 8mm shaft. Post-Printing Parts to be printed: 1x Holder Additional parts (Vitamins): 2x nut M3 2x nut M3 (Nyloc) 2x screw M3 x 20mm 2x screw M3 x 16mm 6x washer M3 1x Opto endstop with TCST2103…
This is a three-part print that lets you mount an 80mm fan below, and a 120mm fan above, your new Topton N100 "fanless" pc that you just bought only to discover that it overheats and/or burns your fingers. If you haven't bought one of…
A little toolbox for the desk. Model was inspired by The Fusion Essentials YouTube channel:
The bracket is suitable for the mini PC sold as “Topton pfSense Firewall Soft Router N6000 N5105 N100 4x i226-V 2.5G LAN NVMe Barebone Fanless Mini PC HDMI2.0 DP AES-NI OPNsense” on Aliexpress (as of Nov 2024). It replaces the base plate…
A wall mounted holder for the Optoma remote control. Not sure if the dimensions are the same between all their projectors but this came with the GT2000HDR.
This is a cover for a GLEDOPTO Zigbee LED controller I have a GLEDOPTO Zigbee LED controller which I am using to control a LED strip under the couch. One end of the GLEDOPTO controller has a barrel jack for 12v input. The other end has…
It's not perfect, but it's cute enough. It's an octopus that looks like a pop-it.
Fan mount for Topton GM1. It lets you securely mount a fan without case modification.
A display case for sample drops or other eye drops for all you wine lovers out there! Advertise your drops by putting them in this display! Or put it flat on the desk to just use as a drop organizer! Follow along for news and updates:…
Small version Extends the Case of the China-NUCs so that you can fit a regular 25mm thick 80mm fan additionally to M.2 drives with heatspreaders. Also it is possible to add more I/O to the front and backpanel to make use of the internal…
Allows the use of a ChaosLabs CNC Optotap bed level sensor with the voron tapchanger system to enable gcode based automatic nozzle height detection without having to add a bed sensor to each toolhead. I use RRF on duet3d boards and…
Use this plate to connect a Avenger Wall Plate F810 with an articulating baby pin to a Optoma 4K Projector. Add a superclamp and it makes up for a simple and sleek mounting solution. I machined it from black MDF and used it in many…
Created this cover which holds a 80mm fan at the bottom. This replaces the original cover and blows air right into the case, especially on the RAM and NVMe Disk. I'm using it with this stand: https://www.thingiverse.com/thing:6261436 I…
