5,575 models
Oscars award trophy. Galaxy Black and Viva La Bronze (Gold). Use the text function in PrusaSlicer to personalize your Oscar. If you choose to slice it yourself, be sure to put the seam on the back of the statue. EDIT Jan 2024: Included an…
Print approx. €12.52–€15.31 excl. taxPreliminary estimate for one variant
🇷🇺 Добро пожаловать в Россию Welcome to Russia Important Note: Artemio García started creating this model for MiniWorld3D several years ago. When he finally finished it, the war between Russia and Ukraine had just started. We decided to…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
This simple gyroscope fidget prints in about 45min and spins remarkably freely. I usually carry several of these to give away as gifts, and they are some of my most popular prints
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
First, This is all Tinkerheart's design… with a twist. This is also my first print in place. I combined Tinkerheart's holder with Tinkerheart's clip with a swivel so the stethoscope stays level with motion. The clip, as stated, is good…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
Différents casiers pour meubler une L-Boxx Bosch taille 136mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant
Vertical Featherboard for the fence of the Bosch GTS10XC. You'll need per set 1x Featherboard 1x Top Bracket 2x Slot Nut 4x Knob (Update 19.12.2022: Knobs designed a bit smaller to ensure better handling) 4xM6 Hex bolts 2x M6x20 for the…
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
100prznt https://www.printables.com/model/76938-bosch-144-and-18-v-battery-mount A remix of this excellent model from 100prznt - just using less material.
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too. Print instructions Highly recommended to print this with a raft as any elephants foot on the…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
This is a simple little gyroscopic keychain I designed in Fusion 360 following the Product Design Online tutorial as a guide. I took it a step further and set it up as a multi-color MMU print.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
A clip for the stethoscope holders I have designed. Lightweight but durable if printed on its side, and good at gripping even thin scrubs. You can find my stethoscope holders here: https://www.printables.com/model/169349…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed…
Print approx. €3.72–€4.54 excl. taxPreliminary estimate for one variant
I made this gyroscope looking puzzle to enter the Brain Teaser Puzzles contest. You can play with the dimensions (parametric table) but be careful with the width on small diameters because the “key” can be blocked and the puzzle unable to…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
This is a double exhaust system for the Bosch GTS 10 XC. If you have installed a router in the circular saw, you can also use the suction for the stop. It is then suctioned off at the top and bottom. I copied this from Let, s handicrafts.…
A holder for the 12V Bosch professional cordless drill. It can be screwed or glued under a shelf. Print in vertical position for strength, when printed with the flat side down it tends to break. This holder was inspired by the more…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for PETGSource material: PET
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
I planned to stop at a dozen egg designs this year, and then, yeah, nope. I've provided OBJ files rater than STL. The STLs had errors that PrusaSlicer fixed by converting them to OBJ. Both halves of the egg can be printed “right side up”…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for one variant
Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Microscope arms are expensive. What isn't expensive are the multitude of vesa monitor mounts available. I wanted to use a vesa compatible gas spring arm for my Eakins digital microscope. I also wanted the ability to use standard…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
This model is a replacement for the BOSCH GBH 2-26 DRE components, part numbers 1 615 438 429 and 1 615 438 430. The design aims to replicate the exact specifications of the original parts, ensuring a perfect fit and compatibility with…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Schild mit der Aufschrift “Infoschalter für besonders bescheuerte Fragen” Eignet sich zum aufhängen Nur 2 Farbwechsel für den gesamten Druck
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for PETGSource material: PET
To hold my scope probes so they don't clutter my workspace I made a clip that fits to the left-hand side of my Hantek DSO2D15 oscilloscope. Can be used for other scopes too, it fits the Hantek's PP150B probe and the P6100 probes commonly…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Simple gyroscopic star ornament. Two options included. There's a dual color option that uses filament change or just use the single color option. Print settings: Designed with a 0.8mm tolerance, prints best at 0.2mm or better. Avoid using…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Wikipedia: A Pinard horn is a tool used to listen the heart rate of a fetus during pregnancy. This is my second attempt (the first one was bigger and didn't work) and this is fully functional although some times it's hard to find the…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Basierend auf der Idee von « michisbarbq“ (https://www.thingiverse.com/thing:3971430) habe ich diesen Werkzeughalter so konstruiert, dass er der Maschine besseren Halt bietet. Die Löcher sind für 3,5mm Schrauben vorgesehen. Durch die…
Print approx. €8.54–€10.44 excl. taxPreliminary estimate for one variant
A quick and easy holder for the blades for oscillating multi-tools. Uses a shock cord to hold the blades in.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Connect your sander to your vacuum cleaner. The OpenSCAD source file is provided so you can modify the model to suit your need. This is for a Bosch ROS20VS random orbital sander. The inside diameter of the vacuum hose is 38 mm. The…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
I like the Original part what was made by “ Eivind Husby ” I wanted to stick it on the tiles in my storage room, ,but if I still want to mount it somewhere else, I didn't want to leave out the holes. For these I printed suitable plugs…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
To connect your bosch PEX 300 AE to a kärcher vacuum hose (you need my hose adaptor)
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
Replacement knob for broken one on Rigol oscilloscope. 6mm shaft. Printed in white filament PM. Print instructions: Layer height 0,1mm, no supports.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Designed for RC-Plane Aeroscout, fits on wheels with approx 76mm diameter and 20mm width. Mounted on wheel, held in place with rubber rings. No disassemble of wheel needed. I printed in PETG with supports.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
One-handed differential probe for two-channel oscilloscope with math function. With dual acupunture-needle handle holes for alternative or additional pins pointing to same probe tips center location. With adjustment screw, M3 hex nuts and…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
I didn't find it was good to store my posca pens vertically with tip down, they had an habbit to leak a bit when I used them, so I started to store them horizontally, ie, laying around everywere on my desk. Finally I made this to have…
Remove the screws on the bottom of your Bosch 18V battery charger AL 1830 CV, attach the wall hanger and secure it with the same screws. The model was created with FreeCAD 0.21.1.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Use your Bosch 18V Power4All batter pack as USB power bank adapter for charging up to three devices on the go. IMPORTANT NODES: The 18V lipo battery packs are usually unprotected (with no charging or discharging circuit on board). Take…
Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
This is a modified lockring/adapter for the Perpendicular Drilling Jig by @poulanker. It fits the Bosch GSR 12V-15 (without FC!).
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Manufacturing instructions: Material: PETG, PLA 3D Printer: FDM 3D printer, average print time 1,5 hours. Slicer settings: 0.3mm layer height, 3 perimeters Post processing instructions: Clean stringing, install in selected location using…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Holder for my Kaleidoscope Coaster Features Allows to use the coaster as decoration while highlighting its beautiful visual effect Print Instructions Nozzle diameter : 0.40mm Filament : PLA, PETG Holder Default 0.30mm DRAFT Print settings…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Questa è una formina con la faccia di Don Bosco!
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for PETGSource material: PET
Sur inspiration de gloda et Andy Forsberg , un redesign pour le AL1820cv. Fixation murale pour chargeur Bosch AL1820cv Impression en PLA en 0,2mm sans support
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
🔬 Originally, I developed this tool to simplify the handling of medical samples in the clinical environment. 🧠🧬💉 The sides are curved for a better feel and the small dot helps to keep the slide optimally centered. It works for all…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
The Delta-P Duct is an awesome concept. While there are already designs for fitting an endoscope camera, I wanted a system where the camera could be easily removed without disturbing the extruder cooling and restore the excellent view of…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I designed this tray to nicely store my Hameg Oscilloscope Probes. It will likely work with many makes of probes or you can modify it with the included fusion 360 file. It is stackable. You can experiment with different printer settings…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The Adapter connects SKS E.V.A. pump head on the Bosch EasyPump Printed with PETG, 0.15 layer height because of the fine threads The Inlay requires to be clued together with epoxy glue because of air-tightness. Do not forget to insert the…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Made for Cut the main hole for 8 inch subwoofer with a Bosch GST 150 CE i use a 5mm bolt 40mm long
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Locks the probe in the 10x position saving the headache of having to constantly check.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is an experimental device. Use with caution on your own risk. Verify dimensions of the particular device before printing. Manufacturing instructions: Ring: Material: TPU, 40D or other softer flexible filament. 3D Printer: FDM 3D…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Remixes ‘ heroscape modular case for dice, markers, and cards ’ based on a suggestion left in the comments. reduce the height of the wall and then make the lid have that wall changing it to a more full lid. That way, the user just opens…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for one variant
Protect you (toy) oscilloscope! Has cutouts for power, ventilation, and all buttons. Printing Instructions Printed from PLA with high infill and no supports. Consider printing the buttons and switches separately with brims.
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues. The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Scan eines Dekofrosches, beliebig Skalierbar Scan of a decorative frog, freely scalable
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
About This is a pocket version of the Glia stethoscope [1]. It's fully functional, however not meant for a clinical use, but as a giveaway. Authors Developed, tested and built at the OpenLab MedTec [2] by OStGefr d.R Foxley OStGefr…
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
Connect BOSCH PEX400AE to FESTOOL CT17 44mm vacuum hose. Self locking on sander.
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 491996 (High power version, from the Festool Router OF1440, since the grinder can draw 13 amps) two #6-32 x ½'' machine screws To…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Adapter verbindet die BOSCH GEX 18-125 oder GEX 12-125 Exzenterschleifer sicher mit einem HT-Rohr DN50. Einfach aufstecken, um 90° drehen, fertig. Ideal zur effizienten Staubabsaugung in der Werkstatt. This adapter securely…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
The corner routing template can be used to route a corner of a shelf precisely, there there is an extrusion profile is placed. You can use a router bit with a bearing to trace the shape of the template to the shelf. The drilling guide is…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Got tired of accidently pressing the AUTO button and decided to do something about it.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Replacements for the screw covers on the handle of TEK314 storage oscilloscopes.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
A simple Gridfinity bin for the Bosch Quigo Green Laser level cube. I found that other models for the Quigo (non Green) model do not fit. So I designed my own with slightly more space to accomodate the Quigo Green. The size of the cutout…
Print approx. €1.88–€2.29 excl. taxPreliminary estimate for one variant
This adapter was designed with a 135 degree angle to help clear the handle/switch of the belt sander. The vacuum end attaches directly to the Bosch series (VAC090AH & VAC140AH) Dust Extractors with their stock 35mm hose. I've included…
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
This is a jig for Bosch 1617EVS fixed base plate to cut a grove in 2 “inch” side of 2x4 or 2x3, and by “2” “inches” I mean 38.5-ish mm. The max acceptable “2” “inch” side is 39mm. I gave the jig tolerance of 0.5mm which is a lot for a 3d…
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Motivation I wanted to have a small case with oscilloscope, power supply and probes. As an extra feature, the tilt up supports enable you to put the device in an upright position for measurement within the opened case. Printing I printed…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This Gridfinity 4x3 cradle is designed to store a staple gun based on the widely used Bosch HT14 form factor. The tool rests securely in a custom-shaped horizontal pocket , providing a clean and organized storage solution within your…
Print approx. €9.70–€11.85 excl. taxPreliminary estimate for one variant
Just a simple 18.00 mm x 0.8 mm spacer for microscopy. I designed it because a colleague needed it. Inner diameter is 16.00 mm. I've added a GCODE file but I don't remember the exact dimensions of this print. But you can take the settings…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
I loved the design of SoulWager's oscilloscope probe holder and tray, so I remixed it to have openGrid snaps built in. Printed with PLA, 0.4mm nozzle, 0.2 mm layer height.
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Ein einfacher Winkel zu Montage eines Bewegungsmelder (BOSCH Smarthome) vielleicht auch für ander nutzbar ! Gedruckt in PETG
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
EN: The holder is used for attaching various accessories to the Bosch GBH professional drilling hammer (e.g. vacuum cleaner nozzle, drilling depth indicator, etc.). The holder consists from two parts and both are connected with screws,…
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for PETGSource material: PET
This replacement end cap allows you to use a right-angle C7 power cord with your Scosche BaseLynx modular charging system. Design features Same styling as the original part, but slightly wider to accommodate the right angle power cord.…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
prowadnica do szyny zagłębiarki Mafell/Bosch FSN do Frezarki Festool of1400. Należy do wydruku zastosować dwie nakrętki 6mm i dwie śruby 6 mm w celu unieruchomienia prętów prowadnicy.
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for one variant
GYRONULL Pick up any spinner you own. Get it going, then turn your wrist. Feel that? The way it pushes back and wants to stay in its own plane? That is gyroscopic torque, and it is the reason a spinner feels alive in your hand. Every…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
