Counting matching models…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Desiged this tower in freecad after the model of already existing examples
No supports I wanted to add a few more things to test on a temp tower and also use minimal filament. I came up with this fever dream abomination. Enjoy! Instagram https://www.instagram.com/spitzspot/ Print instructions Category: 3D…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
Upload of my project from thingiverse since thingiverse has become trash! Unfortunately I can't upload .exe files here so you'll need to download it from the thingiverse page or directly through this line Introduction Project Goals I…
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Modified model and g-code to work with PLA Silk 195c to 235c
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
An elegant phantom mask. Should be printed with supports (tree) and rafts for good bed adhesion. Can be heated and adjusted to fit face better. I just used a hair dryer. Holes may be drilled for retention string. or can be attached via…
i separated the wings and base
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are: Keys move freely LEDs are still visible Audio sockets accessible with standard sized rubberized jacks Possible to keep the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
This is a coin operated vending machine designed for fun-sized candy bars. It takes American quarters or the included discs of the correct size. Use the key to unlock to door on the back to restock the machine and access the coin drawer…
Temperature tower for ABS/ASA filaments going from 230 - 270 degrees celsius. The machine code is added to the printer profile with a suffix of TempChange. If you'd like to modify the text, you can add a new text shape with a font of…
¡Saludos, comunidad de amantes de la impresión 3D en prntables! Me complace compartir con ustedes mi último proyecto: una torre de temperatura diseñada para probar diferentes materiales de impresión 3D. Si alguna vez te has preguntado…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
Temperature test for PLA, TPU, ABS and PETG
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Update: Added a Version 2 in order to strengthen the fine detail extended tower as it might fail depending on the filament type This is a Remix of the Ultimaker tower which i modified slightly to also include bridging, stringing and also…
En este post encontraras varias torres de temperatura que me a tocado utilizar a lo largo de casi dos años
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
🔧 Real Utility Knife Remix – Compact, Locking, One-Hand Operable This is a thoughtfully re-engineered remix of the excellent original model: https://www.thingiverse.com/thing:3677766 I made several key improvements to enhance…
I recommend that you print the model with tree supports and rafts for bed adhesion. It can be heated and adjusted to fit the face more comfortably. I simply used a hair dryer. It is possible to drill holes for the retention string. I…
En este post encontraras dos torres para petg una de 245 a 220 y otra de 250-230
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
I made this cyclone separator. It consists of five parts, four of which were 3D printed. The last, the top piece, was made out of acrylic on my CNC router so I could see inside but it can also be 3d printed. In my test it worked…
This is a completely parametric temperature tower remake from Tronnic's work (rather than a remix). I liked its basic design, but I missed the ability to tweak on parameters, and hence it is! You can: Set the temperature range and the…
Comme ma nièces à tendance à perdre les pièces, voila des pièces de rechange du célébre jeu "Docteur Maboul" (Operation en anglais). on peut imprimer tous d'un coup ou chaque pièce séparement: -Pomme d'Adam -Os de vœux -Cœur brisé -Os…
By Jace1969 on Thingiverse . Seperated into their own files for ease of slicing/cutting further.
Temperature tower calibration Print instructions 0.20mm layer How-to customize the temperature range:…
**Update** I recommend using the built-in calibration tests in OrcaSlicer these days instead of this model. Of course if you want to use this one, feel free :) I really liked the number of features present in Tronnic's model but wanted…
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
I like the “Keychain Knife” from k-eye a lot but missed some safety and comfort features. So I redesigned a new one with his design as a reference. For safety I’ve changed the front portion for better grip and to prevent the fingers from…
Ready files to print on Prusa Core One Check the original Model for full details here: fast-operation-vise Check this video by Christoph Laimer explains assembly and how it works.
Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…
9-4-22 Added the seperate files for each individual piece. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 38 Filament: PolyMaker PETG Category: Props
Note: The feature to generate your own temp towers has been built into the SoftFever fork of Bambu Slicer. Update 28/1: Updated slicer version and added PLA Plus Temperature Towers for PLA / PLA Plus / PETG / ABS / ASA on the Bambu Labs…
This temperature probe organizer is designed for the Rubicson wireless BBQ thermometer with 4 mm probes that can be found at kjell.com in Sweden. There is also a step-file attached for easy modification. The parts are intended to be glued…
You can use only the blocks you need, arranging them before to send them to your slicer, just to print everyone at the right temperature , you need to include in personalized G code section, inside before layer change section, this code…
Added letters A to I to this nice temp tower. That way you can use whatever range you prefer. I also added a small break-off tab so you can get a feeling of layer adhesion. Not sure how well that will work, though. Print instructions…
Open the corresponding 3mf file with "Open project...", select your filament and nozzle, use 0.2mm layer height, slice it and switch to the temperature tab. Check that there are multiple temperatures. --> Print and have a look at the…
Customized version of https://www.thingiverse.com/thing:3438677 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3438677 Instructions Using the following options: Base_Temperature = 200 Number_of_Steps =…
Cyclone Seperator for Festool Vacuums This is my custom version of a cyclone seperator for Festool vacuum cleaners. The goal was to build my own, cheaper version of Festools CT-VA-20, while maintaining the core functionality without…
[2018-03-28] User i_has_it found out that the only thing to make it work with S3D is to adapt the layer change script like that: ;LAYER:[current_layer] [2018-01-25] Thanks to user groenewaldd's hints in the comments i have adapted the…
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
Con este modelo de torre de temperatura podrás realizar los cambios de temperatura de una manera fácil e intuitiva, ya que está diseñada para realizarlos cada 50 capas de impresión. Utilizando el comando M104 S…. ¡Y la temperatura a la…
About the Part This is a remix of the very popular Smart Compact Temperature tower. We would like to thank gaaZolee for the inspiration for this model. This is also a modified version of the Popular OrcaSlicer temperature tower . Side…
Case for Teenage Engineering's Pocket Operator. This case is compatible with the wire folding stand, and the loop at the top doesn't need to be removed. All LEDs shine through a small hole above each button, and there is a hole to allow…
Simple Mod to mount a temperature sensor to the gantry
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
UPDATES! Feb 4, 2025 Changed “before layer change” macros to accommodate nonstandard layer heights (now checks “is between 1.45 to 1.75” instead of “is exactly 1.6”). Still can't guarantee successful temp changes on layer heights above…
Just download the G code and print!
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
This model and associated optional configurations are the result of months of trial and error work to improve the chamber heater behaviour of the Qidi Plus 4. The stock chamber thermal probe is located under the frame rail to the…
Remix of Volkswagen Golf GTI - Low Poly Miniature which was designed by von Agustin "Flowalistik" Arroyo Seperated the wheels that you can print them seperately, maybe with color change, or add your own custom rims. If your printer can…
Fast Bridge and Retract test part If you like it --> press like it :-) Have searched for a model with which i can fast check good settings for temperature, the fan or retract. Found a lot of Temp towers but they took nearly 3 hours for…
I bought a new spool of FilaCube PLA 2 , but it jammed the extruder as soon as the second print layer started. FilaCube recommended raising the temperature, determined by printing a temperature tower. Most temperature towers use way too…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
I originally found this model for free somewhere else. I don't remember where exactly and I can't find it anymore. When searching through yeggi, i think it's from cults, so i chose that as source, but it has been removed from there, so I…
As a special request to Steven Borrero, I have tried to split this helmet into components as best I could. Hopefully it will work for you and your sons project, Please check the sizing and post some pics if you do take this print on,…
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Mount for a temperature or humidity sensor on top of the Prusa MK3S printer. Sensor:…
Compact tuning tower with essential minimum features. Bridge: 25.0mm Overhang: 25° and 35° Hole DIA: 3.0mm Height of each tier: 8.0mm (including 1st tier) [ Available in 1 - 12 Tiers ] Using a tower with the required minimum number of…
Incase Prusaprinters glitches out again you can find it also here: https://www.thingiverse.com/thing:4881488 This gun shell is a replica from the Operation Wolf Arcade game. It is assembled much like it's sheet metal and steel father, but…
I'm really happy with how this one turned out! The Drone Operator Pack will serve your Dummy SWAT or Military team well. They may be the nerd of the squad, but it's still nice to have them around as a set of extra eyes. The drone has a…
Correctly sized box to fit iem wrap, seperated into indivitual .stl files
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
I have many Aqara Zigbee thermometers around my house and it's a pain to change the batteries once a year. Two AAA batteries should have much more capacity than CR2032 cell. This case houses the sensor and two AAA batteries inside. It…
I printed this with no supports on my Prusa Mk3s+ using some cheap black PETG. Screw holes are sized for #8 flat head screws. I'd love to hear your feedback and see pictures. Thanks!
Update 2026: Das Ersatzteil wurde nochmal überarbeitet in der Version 1.2 mit nur 4 Schlitze. 4 Schlitze reichen aus um den Gewindering auf das Ersatzteil zu schlieben. Jetzt sollte das Ersatzteil um einiges stabiler sein. Außerdem wurde…
I needed a bit more range than some other temperature towers, so I made a configurable Temperature tower based on: https://www.printables.com/model/38895-temp-tower-prusaslicer-02mm-layer-petg https://www.thingiverse.com/thing:2493504…
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
To adjust the temp tower you can use the py-script. https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height. If you use Prusaslicer, you can insert the…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
I provide you with two versions. One small (10cm x 10cm) and a big one (20cm x 20cm) 10x10 20x20 The Model is seperated into parts so you can easy choose another color and the parts are more easy to print. Update 21.11.2023 Emblem and…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 36mm x 29mm 6mm Keyring hole
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
A basic case for for an STC-1000 (or ITC-1000) temperature controller. Prints without supports, and needs no fasteners. After printing, run the sensor wire out through the back hole of the case and run your power and device wires in…
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
The source marked this model as adult content.
The original STL files were unuseable, since they were for the complete box in 1 piece. So i decided to convert the 3fm files (which are correct) to STL files. Original design:…
