Counting matching models…
A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Budget PiKVM Enclosure (Raspberry Pi Zero 2W + OLED) This is a custom-designed, two-part enclosure built specifically for a budget-friendly PiKVM setup. It neatly houses all the essential components for a compact, remote PC management…
This model is inspired by https://www.thingiverse.com/thing:4950281 Case for a PiKVM ( https://pikvm.org/ ) with following equipment: Raspberry Pi 4 HDMI to CSI-2 bridge based on TC358743 https://de.aliexpress.com/item/400010 USB-C/PWR…
A small case for Raspberry Pi Zero 2 W mainly designed for PiKVM variants with covered GPIO and CSI slots or open HDMI to CSI-2 bridge: https://www.aliexpress.com/item/4000152180240.html CSI case: 1x piKVM_-_rpi.stl or…
Simple case for PiKVM ( https://pikvm.org ) based on Raspberry Pi Zero 2 W. Components used: Raspberry Pi Zero 2 W. CSI-to-HDMI converter / adapter based on TC358743. I'm using the module with green PCB labeled “C779”. Different modules…
Assuming you're using the same (Geekworm X630) HDMI-CSI bridge (…
My recommended use case for this is an easy monitor solution for a headless device having issues. This is way smaller, lighter, and easier than lugging a monitor over to a NAS in a closet only to sit on the floor to figure out why it…
Bracket PCI for PiKVM based on Raspberry Pi 4 with HDMI to CSI-2 bridge based on TC358743
A case for a PiKVM V2 (with functional audio). Parts list: Raspberry Pi 4 (any will do, I used 1GB) A power supply for the Pi, be smart, if this is running 24/7 be sure to get a supply that wont get too hot. Some female to female dupont…
This is a remix of the original Case published here: https://docs.pikvm.org/stl/v3.3/ The original case is just fine when placed into one of those dedicated server rooms which tend to be extremely loud with hundreds of fans of all sizes…
https://docs.pikvm.org/v2/ Components used: Raspberry Pi Zero 2W. Display: https://www.aliexpress.com/item/1005006132661128.html Flex cable: https://www.aliexpress.com/item/1005006070586087.html HDMI to CSI-adapter:…
Just a quick PiKVM case for a Pi Zero 2 W with an HDMI/CSI-2 adapter . I also needed ventilation for the heatsink I used, which I mounted with the fins facing out towards the long grill on the bottom. Props to and thanks for YAPP_Box ,…
Case for PiKVM DIY IP-KVM OpenSource Project PiKVM. ( https://pikvm.org/ ) Note : This model is still a work-in-progress. This is made as a concept. Printable and works, but some design changes are needed. Chages has been made, but still…
a housing for the pikvm as pizero and pizero 2 as a suitable csi-hdmi module i have used this print settings: 0.2 layerhigh
PiKVM v4 mini - Rack Mount. Best results with print support
This is a complete case for the Geekworm PiKVM-A4 that includes the CSI, ATX and OLED modules. The top of the case is press fit onto the bottom half. You'll also notice there is a rise for 2 of the standoffs due to the manufacturer…
This is a case for a DIY PiKVM V2 stack using a Raspberry Pi Zero 2 W, a C790 HDMI-to-CSI adapter board and a 0.96" OLED Screen HAT (see photos), held together by a couple of M2.5 standoff and bolts. The only ports exposed are HDMI, OTG…
I designed a custom case for the Geekworm KVM-A4 V2.0 Kit PiKVM because the available options online didn't meet my needs. Features of this case include: Properly positioned and sized connector cutouts Inset micro SD card slot for easy…
This is a PCIe bracket on which a PiKVM setup can be fixed based on a Raspberry Pi Zero W + Lusya HC100 Ver:A01 HDMI to CSI bridge + 3cmx7cm pcb with ATX power on/off + reset. Check out the awesome PiKVM project at https://pikvm.org/…
The PiKVM is a popular device for remote KVM (Keyboard, Video, Mouse) access using a Raspberry Pi. It allows you to control a computer or server remotely as if you were physically present. This design I wanted to have the ability to…
The original bracket was too thin for my use. Even before adding the PoE hat, while it worked, it was sagging too much for my taste. As I also wanted a PoE hat, I wanted it to be more solid. This is modified in fusion360 off the mesh…
I really like the design from evancli for RPi4 with HDMI CSI Card. I make the slot bigger to fit CSI to HDMI bridge card for Pi-KVM. I also remove the top OLED mount because it will not fit with the larger C779 module. Update 4/6/2021:…
Inspired by https://www.printables.com/model/119650-pikvm-case Built in OnShape https://cad.onshape.com/documents/2c0ae6de38ccb09d60802629/w/e137eba36b907ff76f388ea8/e/12dfe527d5278b576568bad1?renderMode=0&uiState=6636c55fea7d80165f2d8dd3…
Remixed the model of Nashuar, thanks for the base-design. What I added/changed: mounting for the power/USB-splitter on the lid cutouts for the USB-ports of the splitter in the case cutout for a 0.91 inch (128x32) OLED display in the case…
PIKVM case supporting the Raspberry Pi4, USB-c power/hid splitter, RJ45 ATX connector, and a 0.96" OLED display
For best results us supports and PETG or ABS. I did prototype it with PLA, and while is should work I liked the rigidity of PETG.
A revised PiKVM v3 ATX mounting bracket. The original bracket design snaps easily; this remix fixes that.
Very low cost (10 inch) rack mounted implementation of a PiKVM with a spare Raspberry Pi 2 I had lying around. I only had to add a breadboard, a few jumpers, a transistor, an Arduino Pro Mini and a chinese USB HDMI video capture card. For…
I wanted to add my PiKVM to my homelab server rack to easily remote control my servers when SSH is not available. I searched for a solution and found this project: Geekworm PiKVM with POE 2HU Mount I liked the idea of printing modules and…
I had best results printed in PETG, with 30% infill and supports.
Base is the same as the V2 basic, just with my addition on top. Print orientation is the same, no supports are required. The clearance on the top floor is a little tight when inserting the PI, but it does fit with some wiggling. When…
Insert/glue four 8x2mm magnets to be able to magnetically mount this enclosure.
A single slot shroud for the BLIKVM PCI-E card. Additional hardware is not required as it uses the included screws and fan. Now you can fit your PIKVM in your PC case next to another PCI-E card without sacrificing the additional cooling…
I found the rackmount from “cjdawson_com” interessting and build it myself. I had a few problems with the keystones not holding correctly. So I merged the Keystone Panel Mount from “M” with the original model and also added a few extra…
This is a PCIe bracket on which a PiKVM setup can be fixed based on a Raspberry Pi Zero W + Lusya HC100 Ver:A01 HDMI to CSI bridge + 3cmx7cm pcb with ATX power on/off + reset. Check out the awesome PiKVM project at https://pikvm.org/…
Quick modification of the PiKVM Case's front to work with the green variant of the CSI board.
Update 12/20/2024 - Reworked the cover plate tab to improve strength and fit. Added honeycomb pattern ventilation holes to the Pi mount to improve cooling. I wanted to rehome my PiKVM built a couple years ago to mount somehow to my 4U…
designed to house a Raspberry Pi 3-based PiKVM (Pi-based Keyboard, Video, and Mouse over IP) setup early draft version, untested
Description identical to the original made by @EnriqueNeyra_1471646 If you're using a 0.96" OLED screen by AZ Delivery, the original peg spacing won't fit as the AZ screen has a different spacing between the pegs. This lid might also fit…
Motivation After printing the original ATX mounting bracket found the clip-on mounts a bit flimsy, so besides drilling them out decided to make a remix for future needs. Files Files with suffix _source are the ones used to render the STL…
just like in the original, to get the honeycomb pattern I've adjusted my slicer settings to: wall loops: 5 top shell layers: 0 bottom shell layers: 0 sparse infill density: 25% sparse infill pattern: honeycomb feel free to stack and…
Model for PiKVM DIY case for RPi Zero 2W with WAV-19137 HDMI To CSI Adapter. HDMI To CSI https://www.welectron.com/Waveshare-19137-HDMI-to-CSI-Adapter_1 Otherwise 2.5mm standoff & screws. Standoff used: 12mm. Print quality poor, could not…
Case for RPI Zero 2 W with additional space for heat sinks
The PiKVM v3 hat with metal case is really cool, but I needed a way to keep it off my workbench. This bracket allows the PiKVM to slip in and still have all the ports accessible. Plugging in one cable on the left and right inevitably…
PiKVM PCIe mounting plate
Rackmount for the 4-port ezcoo KVM 4x1 switches that are recommended integration with PiKVM for controlling 4 machines. Supported devices include: ezcoo EZ-SW41HA-KVMU3P (ideal for PiKVM) ezcoo EZ-SW41HA-KVMU3L
Dual-slot PCI bracket for PiKVM HAT v3
Rackmount for 4 piKVM Mini Devices. Can easily snap into place and fixed with a cable tie. In the front there are Numbers and a Place for labeling tapes. There are two version. One for print as a single pice for large printers. And one…
Liked the PI-kvm v2 case , but had problems to fit the cables with heatsinks. Generated a H25 Top from Malolo's case and integrated the HDMI to CSI interface from PI-kvm v2 case and an OLED 128x64 cutout from PiKVM case (LCD+ATX) . You…
This is an enclosure for the DIY PiKVM kit consisting if: Raspberry Pi 4b: https://www.adafruit.com/product/4295?src=raspberrypi USB-C/PWR splitter: https://www.pishop.us/product/usb-c-pwr-splitter/ HDMI CSI-2:…
DISCLAIMER: This is not trivial to build. You need understanding of electronics, Linux and basic soldering skills. This Description is also not a great tutorial. If you do not understand what you read, this is not for you. Sorry. Please…
A new plate holder for the PiKVM v2. NOTE: This will not fit in the 10" Rack Mount plate that JeffCurless created, you have to use my modified 10" Rack Mount plate, located here: https://www.printables.com/model/1445643/ Parts: 2.5mm or…
This is a mod of Nickatron's case with vents for the PiKVM V2. This has been modified to accommodate the commonly available BliKVM USB splitter. You can download the bottom half from Nickatron's model.…
pikvm cheap readymade parts Is nice OpenSource Project: https://pikvm.org/ I use the PIKVM with a webcam pointed at the screen because I only use it to check if there is a problem and to start my pc. Webcam is cheap works without hdmi…
This model is just a modified “front part” of the case (case_a_no_oled.stl), grab the rest from quattro's model or directly from PiKVM docs .
This is a small wall-mount holder for a PiKVM. I found it easier to have a little wall mount jobbie than futzing with velcro. This uploaded version is my final draft, the one in the pictures is the beta. It works great.
This is a case for the ATX Board PIKVM Remote Control ATXA-A+ATXA-B Board for Raspberry Pi CM4 as found on ebay -> https://www.ebay.de/itm/354162821153 Category: Computer
I couldn't find a case for V1.1, so I modified it based on the V2.0 case. I made holes to expose the heatsink and OLED. I also changed the Micro USB port, which is no longer used, to not be exposed externally. It doesn't shake much…
I built this after wanting to mount a bunch of single board computers and mini PCs into my rack, but not finding any solutions. There are 2U modular rack carriers, but nothing in 3U, which was more suitable for the kind of stuff I'm…
This module allows mounting a PiKVM v1 to a DAP 2U MP-1 panel or on my printable version . It hosts: A Raspberry Pi 3 A Raspberry Pico An HDMI-CSI Bridge TC358743 Other DAP mount modules are available on my profile
Using a RaspBerry PI 3 B+ that i had laying arround I builded a PIKVM DIY V1 KVM. Since from all the DIY versions that PIKVM offers the V1 is the least popular, I had to create a case/rack mount since i was unable to find any model for…
Printed on Ender 3 v3 KE 4 wall loops on top, left ,right and base panels used m3 screws (12mm) for front and rear panels as well as posts I recommend using supports for top insert
Hardware I used: Geekworm PiKVM POE Hat DAP 2 HU Bezel USB right angle adapter 2,5mm brass distance hexnuts
I build this mount to hold my PiKVM, which is based on a Pi Zero 2W, the Geekworm C779 camera, and 3d printed case designed by @Luke_330998 at the following url: https://www.printables.com/model/547372-pikvm-zero-case He did a fantastic…
Modified the existing PiKVM case to make it work with 10mm m3 bolts/screws instead of requiring longer ones.
Assembly of case: As with the original model, i used M3x16 screws, which are slightly too big for Raspberry Pi (which uses M2.5). For a one-off project like this, I just drilled the holes on the Pi up to 3mm. Assembly of display: The…
For those of you with a empty slot in your Shuttle XPS rack mount (PRM01) and a 4 Port KVM you would like to rack mount. This is the kit for you. The included STL is one side, pull it into your favorite slicer and mirror for the other side.
This is a modified version of the PiKVM case where I have moved some ports around and added an ethernet breakout module to control the ATX controls on my PC. No supports needed for the box, use auto-tree supports for the bracket. The…
I printed with the following settings: 0.4 nozzle 20% infill with support
Build your own KVM with a Raspberry Pi 4 and some extra parts. Bill of Materials: I have listed everything needed, but feel free to substitute with items you may already own. Raspberry Pi 4 Raspberry Pi Charger (get the newest 27W…
The PiKVM v3 hat with metal case is fantastic, but I disliked that large hole where the Video Out connector is. Fill the hole with this plug, available in two version, with a Pie graphic or Blank. More information at https://pikvm.org/…
I wanted to mount my PiKVM to the wall so I added screw plates to make it easy. I also filled in the side punch outs as I didn't need them. Happy to produce a model with them back if you do. Remixed from…
Lid tolerance is about 0.1mm. I've printed using creality k1 and it is working ok. Display cover has to be glued. Apply glue only to outside area. I've printed from ABS and used acetone to glue cover.
Case for PiKVM v1 Running on a Raspberry Pi 2W. Also using a Pi Pico for the HID interface. Supports on the lid screw tabs we all that I found needed. Used a 4 pin ribbon wire to connect the micro-usb to the capture dongle.
Tested with PLA+ with 25% infull and supports (for the screw holes) Requires 2 Screws: M2.5*8 to replace the existing screws at the side without the OLED screen.
PiKVM case - Raspberry Pi 3B+ with a Raspberry Pi Pico (HID) on the base
I needed a more professional way of mounting our PiKVM switches in the server room, so I designed this holder. The Switches slide in from the front or the back, and is kept in place by using bigger screws on the sides of the case,…
I really like the PiKVM metal case , and for £30 UK from the Pi Hut it is pretty good value. With the case, you get a good 0.91 OLED mount, display and 5v fan - expecting you to buy the companion PiKVM hat. I had the Waveshare HDMI to CSI…
Remixed w/screw mounts, 3mm holes, and mounting for the following CSI card: https://www.amazon.com/dp/B0DNS52HXZ
geekworm pikvm with bliswitch at the back
Overview This is a custom-designed internal mounting tray (modeled in Shapr3D) to install a complete DIY PiKVM v2 hardware stack directly inside a PC chassis. Originally built for the brushed aluminum Lian Li PC-8FI mid-tower case, it…
For best results us supports and PETG or ABS. I did prototype it with PLA, and while is should work I liked the rigidity of PETG.
I printed with the following settings: 0.4 nozzle 20% infill with support
Simple case for PiKVM ( https://pikvm.org ) based on Raspberry Pi Zero 2 W. Components used: Raspberry Pi Zero 2 W. CSI-to-HDMI converter / adapter based on TC358743. I'm using the module with green PCB labeled “C779”. Different modules…
A case for a PiKVM V2 (with functional audio). Parts list: Raspberry Pi 4 (any will do, I used 1GB) A power supply for the Pi, be smart, if this is running 24/7 be sure to get a supply that wont get too hot. Some female to female dupont…
