Counting matching models…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Update May 3rd: Improved Freewheel and Pawls leading to better plunger action & longer coasting. Update May 2nd: Added new STL for Detonator box without text (Not pictured) Amp up your tabletop gameplay with this themed interactive dice…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
Description osVAC Adapter for the Makita SP6000 plunge saw. However, it is rather a replacement for the original vacuum port of the saw to make the saw compatible with the osVAC standard. There are some adapters already available, but I…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.
Print approx. €7.36–€9.00 excl. taxPreliminary estimate for one variant
Eine Gardena Spannmutter inklusive eines Knickschutzes, welcher abgerundet nach unten geht, damit der Schlauch nicht bei hohen, freihängenden Installationen, wie an einer Schlauchtrommel, an der Spannmutter direkt durch dauerhafte…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
A replacement plunger/pusher for the magimix 5200/4200 food processor Clean and easy print. fits perfectly. much cheeper than ordering the original one. Enjoy.
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
Print Instructions: Infill: 100% Infill Material: Any Supports: Paint supports around the hole in the middle of the plunger if needed Add a color change where the stick meets the plunger Assembly: Slide a round toothpick (1/16” or 1.5mm)…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
I lost my plunger for my Cuisinart DLC7 food processor and made this one by looking at some photos of replacement part. I printed using PETG but if you have ABS it would probably be better. I printed 100% infill with top side down,…
Print approx. €4.83–€5.90 excl. taxPreliminary estimate for PETGSource material: PET
Found this model on thingiverse and did not found it here so to promote or attribute this artist here is the link to the original file https://www.thingiverse.com/thing:4871206
Diese Spannmutter gibt es von Gardena nicht als Ersatzteil. Also habe ich mir selbst eine gemacht. Falls sich die Mutter nur schwer aufschrauben lässt, kann etwas Silikonspray auf das Gewinde gesprüht werden, damit geht es dann leichter…
This cover/cap is for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover is very precise. It will keep dust from escaping through the side opening, thus improving dust collection. Be sure to check out…
This is a functional model of a Scharfenberg train coupler in the style of a fidget toy. https://en.wikipedia.org/wiki/Scharfenberg_coupler This is optimised to be printed with no supports, 0.2mm layers, a standard 0.4mm nozzle, no brim…
This track was created using a pre-release version of MarbleLab: a tool that lets you design marble roller coasters in VR, test them virtually with simulated marble physics, and then export files for 3D printing. www.marblelab.io…
My son lost the trailer hitch (Anhängerkupplung) for his Bruder Wheel Loader. I took some measures and had a look at some images from the official replacement parts and designed this one in Fusion 360. There are two versions: One with the…
I wanted a classy cover for the trailer hitch. I should not only protect the hitch, after some bruises I decided, my shins need protection too. The Cover has a wide edge with only 10% infill, so it is hopefully a crumple zone. The Cover…
A set of fully printable plunger tubes! These plunger tubes are a fully printed design that fits in standard TCs, Caliburns, Lynxes, etc, without modification to the blaster ! So far, there are plunger tubes in these sizes: 1.5" OD…
Die Abdeckkappen für meine Anhängerkupplung gingen alle Nase lang kaputt - das Plastik ist gebrochen. Oder ich habe sie verloren. Also habe ich mir eine aus TPU gedruckt. Damit sitzt die Abdeckung stramm auf der Kupplung. Möchten Sie in…
Ich wollte irgendwas für meine Anhängerkupplung also habe ich mir eins erstellt :) Es gibt zwar schon einige aber ich wollte es unbedingt selbst machen.
Ich habe einen Halter für den CEE Stecker meiner Brennenstul Kabeltrommel gesucht und den von Thingiverse “crix26” für sehr gut befunden. Leider habe ich einen anderen Stecker an die Kabeltrommel verbaut und somit passt der Halter nicht…
Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca…
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
This is not my work. Found this on grabcad and I think it can be of use for people on this website.
Die Halterung des Winkelsteckers nervt einfach. Ich habe dann das Modell von https://www.printables.com/@edmanderl_108910 gefunden und für mich nachgebaut. Das Kabel muss man links herum aufwickeln, dann passt es mit der Halterung ganz…
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
einfachere Montage
Dust collection shroud with vacuum attachment for Bosch 1617 plunge router base. Holes for optional 5mm LEDs.
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
ich habe den schiefen bommel gerade gemacht damit oben am bommel nicht soviele farbwechsel erforderlich sind! außerdem habe ich die aufnahme verbessert ich fand die schraubversion unnötig und die andere normale version hat auf meiner…
Plunge router base plate for Bosch model 1617 2.0-2.25 HP router motor. Design based off factory design. (Can add fixed base design, depending on need/interest) This is a work in progress, as I am working on a series of designs and…
This is a dual-extrusion / multi-color remix of mrmacnology's outstanding design for a snap-in cover for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover body is identical to the original design, I…
These wall hangers hold either one or two Makita guide rails (tracks) for your Makita plunge saw (track saw) Includes counter sunk holes for #4 (4.0mm) screws to fix to the wall. IMPORTANT: The longer of the two hooks must go at the top…
Here is 22. cal pellet I designed for my Pellet gun, Warning! very loud and fast moving, Print on Face
Hallo, Ich habe hier einen Kupplungsschlüssel modelliert, der auf die Baugrößen B und C der Storz-Schlauchkupplungen passt. Diese Art von Schlüssel wird unter der Norm DIN 14822 beschrieben. Storz-Schlauchkupplungen werden für große…
A plunger for Dummy 13, to unclog the shit he causes
Plunger for the RS Pro epoxy gun, to work with 3M scotch-weld 2-part glues like DP8005. I printed this standing up in Sunlu White PLA+ with a 10mm brim and supports for additional stability. I've included the bgcode for a Mk4.
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
Scharfenberg magnetic coupling for model trams and light railways in scale 1:87 (H0) The magnetic coupling can be used for almost all light rail models and many GDR tram models that use Scharfenberg couplings. The printing should be done…
GEKA Schnellkupplung auf ¾" Schlauchanschluss. Gedruckt in PETG. Die Gummidichtungen gibt es im Baumarkt einzeln oder z.B. bei Amazone. https://www.amazon.de/gp/product/B079W6C1NG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Gedruckt…
Bosch 1617 Router Plunge Base Dust Adapter
This cover plate closes the hole for saw blade change in the blade covers of the Parkside Plunge Saws PTSS 1200 C1, PTSS 1200 C2 and PTSS 1200 D2 (D2 confirmed in the comments by Lee Morton - Thank you, Lee) and should improve dust…
Slightly modified version of original, as that one would detach on my glass-bed equipped printer every time. Added a scaled cube with Blender that extends the bottom layers from 3 thin lines to one rectangular area.
Wasser Kupplung für die Dicht-teile ist TPU vorgesehen Füllung 100% Bei unsachgemäßen Arbeiten an Wasseranschlüssen können kostspielige Schäden entstehen (z.B. Wasserschaden). Daher ziehen Sie bitte wenn nötig Fachkundige Hilfe hinzu.…
Plunger for the RS Pro epoxy gun, to work with 3M epoxies like DP2216. Can be printed standing up without supports!
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
German helmet themed car decoration 50mm diameter
Mit diesem Upgrade zeigt die Makita Sage endlich die Exakte tiefe an der Skala mit Führungsschiene an. Einfach das Original Teil abschrauben und dieses quasi als Unterlage darunterlegen und die Schraube wieder montieren. Die Montage ist…
Simple wall mounts.
This package contains an applicator tip and plunger for the cheap Chinese made Amtech 10cc syringes, which are sold in bulk and come with neither. I'd been hot gluing plunger base from an old Global 10ml syringe with the rubber end…
Use the high power plunger for normal length K25 springs. The low power plunger should be used for the 788 spring, or 20 coils of K25 for a big power boost.
Update May 10 2022: So it's been a year or so now since I made these. And I have to say, clearly no one printed it. I was reprinting in .10 layer height as well as printing thread into the pull instead of tapping it, just to refresh the…
This dust collector port is for any vacuum port that has a ~1.25" nozzle on it. The neck is tapered to 1.25" about half way down, fits nice and snug. The hose pictured is the hose from the car cleaning kit for Rigid shop vacs. I wanted to…
This is a key for tightening the beiter plunger on your riser. Sometimes the space between the nut and the spring case isn't enough to fit the original key, so I decided to make my own! Cool adition to the original key it has a hole so…
Dewalt makes a really great plunge saw that runs on a track. To get full value, however, this track needs to be fastened to the material it cuts. The gadget to do this is a slightly modified version of a quickgrip clam that fits the…
Created a simple tool to help realign the piston on a Flair 58 manual lever espresso machine. I tested it on my Flair58 while fully heated and the tool seems to hold up fine printed with PETG, but use at your own discretion. Also works…
Este Plunger de 12 cm / 5 pulgadas, fue diseñado para ser utilizado en caso de emergencia o imposibilidad de salir a comprar uno a la ferretería. este dispositivo sirve para desobstruir inodoros o tuberías. Se puede usar con la mano o se…
This is a tray for a 6" flange style toilet plunger with 3" to 4" flange. The main part of the plunger sits on the fins with the flange held slightly off the bottom. I printed mine in PETG with a 0.6m nozzle at 0.3mm layer height with 10%…
A painting handle with a rotating platform that spins on bearings and is restricted by a ball plunger. The rotating platform is assembled with two bearings and a long M4 screw. I used an M6 ball plunger although it can be used without…
These simple PTFE tube couplers connect my drying boxes to the filament inlets of the 5 Prusa XL print heads. The large numbers help you to quickly find the correct inlets. Print the couplers in STL orientation with max. 0.15 layer…
Merge of a coupling with a 1x2x0.5 duplo brick with a female coupling. Purpose: Make other cars hitchable
Plunge Router Adapter for Makita DRT50 Plunge Base which fits the Parkside Plunge Saw Track. Remove the fitted base plate and reuse the 4x M4 screws to fit the Adapter to the Plunge Base. The Adapter can be readily altered to suit other…
When you detach your trailer hitch you end up with a lot of grease in your hands and eventually everywhere you'd like to put it (most likely in your trunk). So print this cover and your fine putting it away without covering everything in…
Pool Skimmer Magnetkupplung Bestwaypool für ein Leichtes tauschen zwischen Skimmer und Poolbodensauger. Um nicht immer den Poolschlauch umständlich von dem Skimmeranschluss bei unserm Pool zu demontieren. Ist diese Magnetkupplung…
Stop for saw guide tails I made this stop for plunge saw guide rails it fits with the one from Festool and Makita. If the stop is flipped you can use it as a router stop. It is a quick print and if you want two it is a good idea to mirror…
Cover for the Parkside Plunge Saw (PTSS1200D2) designed to cover the gap on the side and enhance airflow for the vacuum cleaner attachment. This design is composed of several parts that are meant to be printed as a single unit. The cover…
tow coupling for rc motor airplane - glider towing It's a construction for my Bushmaster 84", 2.1m Servo size 29x13mm Carbon fiber rod 55x5mm or M5 screw for reinforcement
The stock plunger did not press evenly on the cartridge plunger leading to enormous leakage at the back of the cartridge. I almost exclusively use the polymere cartridges from Würth (German professional hardware store) I used a metal…
Verbindungsstück zwischen Kran und Zange Category: Other
Verschiedene Gardena Kuplungsstücke
A toilet plunger holder!! The g-code for the plunger holder base and lid both have Octogram Spiral selected for top and bottom layers which leaves a nice little design on those layers as an option to just smooth. Also, the base holder has…
Building Block part to connect two vehicles or parts. rotation possible. loos fitting. easay to connect and disconnect. this is not Duplo or Lego. It is a own design and build and modeled on my own!
Wheels for building Blocks in combination with coupling machanism. a flat 2x2 Brick Block with male and female coupling on the end sides. So when building cars or vehicles you onlay need this part to make an endless chain of rolling…
This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy
also needed: spring 35mm 110N .7mm Misumi LM8UU LMU8 Linear bearing 3x M6 40mm Hexagon head 3x M6 nut 1x M6 60mm Hexagon head 1x M6 self-securing nut 2x 8x100mm smooth rods 4x shaft circlip T8 threaded
Roco cars are wonderful but they come with a regular swinging coupler yolk. You can purchase close coupling item 4481 (kurzkupplung artikel 4481) to make the cars close coupling… but good luck ever finding one to buy. Clean the print of…
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
Siku Ersatz Heckkuplung 1/32 zusätzlich wird einm kleiner Nagel benötigt (durchmesser 2mm) der in das Loch geklebt wird und auf die passende länge abgezwickt, mit gedruckter anhängung hatte ich bisher schlechte erfahrungen gemacht Siku…
A plumbing plunger in three sizes with a compact screw-in handle. Useful for cleaning blockages and clogs in all sorts of sinks and drains. Approximate base diameter: S - 100mm M - 125mm L - 150mm Every part is optimized to be easily…
Referenced SillyButts Plunger tube design to create a variant for the Ontos. 150mm long and OD of 35mm ID (with the plastic insert) is 32mm. Works great! I have tested it and barely noticed a drop in FPS compared to the aluminum tube. I…
Zwei Servoaufnahmen für den Scania S770 8x8 von Carson Tamiya, je eine Aufnahme für die Entriegelung der Anhängerkupplung/Sattelplatte Update vom 18.03.24: Fehlende Datei für AHK-Servoaufnahme ergänzt
PTFE-Schnellkupplungen zwischen MMU2S und Puffer Print instructions Um die PTFE-Schläuche zwischen MMU2S und Puffer möglichst einfach und schnell abzutrennen habe ich zwei Adapter für den S-Puffer zum Drucker (Typ C1) entworfen. Vor allem…
Fits 30mm Sanwa buttons without any modification to the button
The DZP MK2 foam dart blaster has a design problem the screw posts that connect the plunger tube to the slide grip are not supported by any webbing, over time they can crack or show signs of plastic stress. This part is meant to provide…
Quick clamp Plunge saw adapter for LIDL Parkside track *** Update 19May24 *** The track clamp had a failure when cutting down a door so it has been redesigned as Version 2. This now has side flares to strengthen the body significantly.…
You need 4 x 12mm m4 screws, the original ones are not long enough. Sand the surface with very fine grain paper.
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Parts to make a pinball plunger for a virtual Pinball. Video of it: It makes a satisfying clank when assembled and installed. Requires the purchase of 2-3 springs, a switch, and a 1/2inch rod. In my build I used Qty 2 of 3" length springs…
Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…
A plunger to get the flux or solder paste out of the syringe. Handy if your other one broke, or if you can't find it anymore :). Print Settings Infill: 25-100% (Depending on the nozzle and viscosity of the flux or solder paste) Brim: only…
Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…
A remix of interactive3s design for my Dewalt 8mm palm router (DCW600) and plunge base(D262004).
Tube with plunger for Star/Heart-shaped Play-Doh Tube where you can insert the children's play-doh and using the plunger, push it and create a large Heart-shaped spaghetti ------- Tubetto con stantuffo per pongo a forma di Stella/Cuore…
2 piece model for easy printing. pieces fit snug, some de burring may be required. Designed for a 8mm x 2mm magnet. .2 layer height, no supports, infill 20% Assembled it measures about: 24mm wide at the base. 48.5mm tall with magnet…
This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of…
Test video: https://youtu.be/dxtW75af_pY WARNING, RESULTS ARE WILDLY VARYING BETWEEN TESTERS. THERE IS NO GUARENTEE OF AN IMPROVEMENT FOR YOUR SPECIFIC BLASTER. Caliburn and TC plungers that have a sloped o-ring channel, similar to a CEDA…
Sink Mini Plunger, a handle to print w/ rigid material (PLA, etc) and two different cups (square, round) to print w/ TPU. I've printed both styles of cup, used several times, works well. Biggest variable is the size/shape of the sink…
Toto je ruční odpojovač pro spřáhla Tillig (TT - 1:120) This is a manual disconnector for Tillig couplers (TT - 1:120) Tillig Kupplungstrenner (TT - 1:120)
A replacement hitch pin for a Rolly Toys tractor and trailer. I used Prusa Slicer with the cut feature to print the two halves which were then glued together with super glue (see picture). For the cut I added four dowel pins with…
