Search results: ponics

Sort order

239 models

P
PrintablesConr8r

Upgraded Modular Hydroponics Tower - More Compact & Stable

Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…

Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant

Downloads
5,383
Likes
1,549
Rating
4.89
P
PrintablesSemiPolaron

Semi Hydroponics - Netcup 4.5" NO SUPPORT

Semi Hydroponics - Netcup 4.5" NO SUPPORT for hydroponics

Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant

Downloads
232
Likes
30
Rating
0
P
PrintablesSemiPolaron

Semi Hydroponics - Bubble pad 12 DWC hydroponics V1.0

ver. 1.0 the arrangement of the internal air flow and the associated greater weight load to prevent floating you need: layer 0.2mm nozzle 0.4mm support under intake pin 100% infil

Print approx. €6.72–€8.21 excl. taxPreliminary estimate for one variant

Downloads
223
Likes
35
Rating
0
P
PrintablesSrayes

2 Inch Netcup for Hydroponics

2inch Net cup for Hydroponics systems, non-stackable, print as needed. RECOMMEND PRINTING WITH PAINT ON SUPPORTS FOR LIP ONLY For use with Rockwool, not tested with clay.

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
16
Rating
0
P
PrintablesRxRick

Kratky Hydroponics cube holder for Regular mouth mason jar

The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
37
Rating
5
P
Printablesfotix

Acuaponics Adaptation into Home Assistant

Not exactly a remix of that one but of this one https://www.thingiverse.com/thing:3405964 The box was printed in Marble PLA. Inside it you can fit the ESP32, a USB C Power Delivery Board and a LN298N Servo Controller. Basically it is a…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
79
Rating
0
P
PrintablesRxRick

Screw-on Kratky hydroponics cube holder for mason jar

My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.

Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
5
Rating
0
P
PrintablesProton Fabric

Modular Hydroponics Tower w/ Grow Lights

Intro This is a modified version of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I finally decided to upload my remix of boundarycondition's Modular…

Downloads
3,313
Likes
579
Rating
5
P
PrintablesMartinS

Modular Hydroponics Tower

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require. Each…

Downloads
1,564
Likes
486
Rating
5
P
PrintablesLorro

Air Stone for Aquarium or Hydroponics

I made this Airstone. It works by altering small arcs, thus creating little holes. I used some 2 cent coins to weigh it down enough so it will sink to the bottom. However, you may get away with printing it at 100 % infill, as both PLA and…

Downloads
1,227
Likes
174
Rating
4.89
P
PrintablesBjoernA

Upgraded Modular Hydroponics Tower - AddOns

At first many thanks to Conr8r for the Upgraded Modular Hydroponics Tower . I made some addons so you can build your own tower with even more flexability. These parts are compatible with his design. I designed additional shelfs with one…

Downloads
1,141
Likes
206
Rating
5
P
Printableskraits

Pod Caps for Gardyn Hydroponics

The pod caps cover unused slots on the Gardyn column to help prevent foreign object intrusion like dust and debris. The pod gets removed before placing cover to avoid water sitting the cup of the pod.

Downloads
945
Likes
52
Rating
5
P
PrintablesBryant Yu

Hydroponics

Let's say that we want to have a 3-layered hydroponic tower. Then we will need: 3x TowerMiddle ( it's in the printable files ) 3x WaterGive 15x Pot ( there are 3 layers, 5 pots per section ==> 3*5=15 ) 1x Top PRINT IN VASE MODE (in all…

Downloads
901
Likes
192
Rating
5
P
PrintablesLuitzor

Modular Hydroponics Tower w/ Grow Lights

Intro This is my remix of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I initially posted this project in Thingiverse (…

Downloads
755
Likes
118
Rating
5
P
PrintablesWilliam Fischer

Hydroponics tower

This is a model I came up with which is simpler than most of the other options our there. The segments are infinitely stackable. The base has 3x .25" mounting points. The lid has a ½" spigot for a flexible tube to be hooked up to along…

Downloads
722
Likes
166
Rating
5
P
PrintablesSquirrelbrain

Vertical Hydroponics System (VHS)

Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…

Downloads
689
Likes
562
Rating
5
P
PrintablesRoss

Modular Hydroponics Tower - add-ons

This is a collection of pieces I printed for the bottom module section of the hydroponic tower, plus a mounting adapter (2 parts), a filling/inspection cap and a cap for passing through the electrical cord for the pump. All the parts have…

Downloads
648
Likes
120
Rating
5
P
PrintablesJeremy G

Remixed Modular Hydroponics Tower

I remixed the modular tower from https://www.thingiverse.com/thing:3405964 and combined it with the improved locking ring from https://www.thingiverse.com/thing:4965368/files. For the lid to the 5 gallon Lowes bucket, I used…

Downloads
595
Likes
133
Rating
5
P
Printablesbjamdesign

Downspout Cap - Hydroponics - 4"x3" Vinyl

I needed a 4x3" downspout endcap for a hydroponic project. I modeled this for a vinyl downspout I picked up from Lowes. There is ~1mm clearance for silicone caulking to make it water tight. Need a water level indicator for your new…

Downloads
437
Likes
51
Rating
5
P
Printablesw3rN42

Net Cup Rack - Hydroponics

This rack holds up to 6 net cups, net pots, basket cups or whatever you want to call it. It is designed to be a simple solution to keep the rock wool of hydroponic plants wet during the germination phase. After that you should put the…

Downloads
429
Likes
64
Rating
0
P
PrintablesSniffle

5 Gallon Printed Lid for Upgraded Modular Hydroponics Tower

This Remix Requires the use of Bucket_Lid_Mount-2.stl from https://www.printables.com/model/232109-upgraded-modular-hydroponics-tower-addons This has been specifically been designed around a blue Lowes 5-Gallon Bucket, others may work but…

Downloads
402
Likes
53
Rating
0
P
PrintablesSniffle

4-Way Plant Support for Modular Hydroponics Tower Garden w/ Grow Lights

This a plant support for the 4-way module originally designed by boundaryconditions https://www.thingiverse.com/thing:3405964 And it also fits with its spiritual successor by Luitzor https://www.thingiverse.com/thing:5712775 Prints Flat…

Downloads
385
Likes
59
Rating
5
P
PrintablesWick3D

Rotating Modular Hydroponics garden

Rota ting Hydro ponics Tow er. Pr int pa rts wi th in ner wa lls wi th 12 0% fl ow I us ed a . 8 noz zle and t wo wa lls I n or der to ma ke the to wer rot ate y ou wi ll ne ed a swi vel ada pter on yo ur wa ter ho se. G o to yo ur lo cal…

Downloads
382
Likes
153
Rating
4
P

Hydroponics pot

Hydroponics pot. Lower part is for water and nutrienst. You can use small waterpump to pump water and nutrienst to the plant. I have used BOYU FP-100 water pump. Plant is planted to rockwool and clay granulas. There is float for…

Downloads
355
Likes
103
Rating
0
P
PrintablesGaladriel

Mason Jar Hydroponics

Ever want to get into hydroponics (growing plants in water), but only had a bunch of mason jars? Well, if so, here's a solution for you. Get your own hydroponics garden in under half an hour! Assembly/Usage: Replace inner portion of mason…

Downloads
347
Likes
156
Rating
5
P
Printablesrav

Aquarium plant pot hydroponics making shrimp hide from roots

Great for making shrimp hide from plant roots or rooting plants (aquarium water is a great growth booster).

Downloads
340
Likes
73
Rating
5
P
Printablesmuddymaker

Hydroponics Grow Baskets

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Hydroponics grow baskets. There are 2 types to choice from.…

Downloads
339
Likes
83
Rating
4.33
P
PrintablesCrazyCzech

Hydroponics Grow Tower - thicker walls

After a month of growth update V2 -realized that wall are too thin and Sun gets to roots. Walls thickened by 22%, recommend to print with 5 loops for essentially 100% infill. For V1, using black spray paint to do two coats of inside fixes…

Downloads
319
Likes
80
Rating
4
P
Printablesbjamdesign

Hydroponics - water level indicator for gutter system

I was inspired to make this 3d model by this video by Dr. Kratky . Designed to be used in a 3" deep gutter/downspout system. *this is just a little test section for a larger row, it was a coincidence I printed an endcap in translucent…

Downloads
314
Likes
120
Rating
4.67
P
Printablessmysnk

Hydroponics Net Cup / Pot System for 4inch PVC Pipe

Hydroponic Net cup/pot System for 4" PVC Pipe Start your plants off first in the smaller net cups in a cloner/nursery. Once you are ready to move your plants to your 4" PVC pipe hydroponics system, you simply use the cap + grommet pieces…

Downloads
314
Likes
60
Rating
0
P
Printablesvr6syncro

Hydroponics Tower - Hydroponik Turm

Hydroponik System - Deutsch (in English below) Das System ist so ausgelegt das der Deckel die ersten Pflanzen mit Wasser versorgt und dann einen kleinen Vorrat befüllt. Wenn dieser voll ist läuft dieser über und benetzt die…

Downloads
313
Likes
63
Rating
5
P
PrintablesAndrewTerry

50mm Hydroponics Pot

I've been printing the parts for Conr8r's excellent Hydroponics system (https://www.printables.com/model/63055-upgraded-modular-hydroponics-tower-more-compact-st) and wanted a robust Jiffy pot. The version included on the Thingiverse…

Downloads
300
Likes
38
Rating
5
P
PrintablesRiccardo Sgoifo

customizable net pot for hydroponics

customizable net pot for hydroponics. I made those pots for my hydroponic setup wich is a recirculating DWC inside PVC pipes. The commercial sizes of 2" pots are too deep for my 100mm pipes, so I made a custom one with a lower height. in…

Downloads
290
Likes
30
Rating
4
P
PrintablesTechnoVardo

Modular Hydroponics Tower - Threaded Bucket Lid Adapter

Threads can be tricky, just slow down a lot (5mm/sec) on inside overhangs and print a few degrees hot. A few loose strands won't hurt anything, just trim them with nippers and keep going,

Downloads
282
Likes
42
Rating
5
P
Printablessmysnk

3.5inch Hydroponics Net Cup for 4inch PVC Pipe

For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…

Downloads
275
Likes
58
Rating
0
P
PrintablesRed

Hydroponics Tower Upgraded Nozzles

Experimenting with two nozzle types for the hydro tower, the goal was to reduce the flow strength by mimicking a mist nozzle while retaining saturation. The pressure is not enough for it to fully mist with most pumps you would use in this…

Downloads
267
Likes
42
Rating
0
P
PrintablesNick

Aeroponics Pot 210H - 185D

Aeroponics is a relatively unexplored grow method that has the potential to solve a lot of the worlds issues. This design is for people who want to “supercharge” their growing while using up to 90% less water compared to conventional…

Downloads
262
Likes
74
Rating
0
P
Printablesryan_be

Basic Hydroponics

A basic two basket hydroponics set up Category: Outdoor & Garden

Downloads
245
Likes
46
Rating
0
P
PrintablesPixel

Hydroponics drain system

I like to grow Chillies and and i lack outside space to grow more so i stumbled upon a video on youtube that inspired me to try hydroponics. after i watched that video i modeled something similar to what is shown in fusion 360 and tried…

Downloads
242
Likes
68
Rating
5
P
PrintablesNick

Bucket Drain Ideal for Hydroponics & Aeroponics Setups

This is a great part I designed because I couldn't find any good ones available online. I used it on my project you can take a look at here https://imgur.com/gallery/2mQM6Cb Though very useful I accidentally deleted the design from my…

Downloads
237
Likes
46
Rating
0
P
PrintablesExpendibleMan

Bucket mount for Upgraded Modular Hydroponics Tower

Designed to work with the Upgraded Modular Hydroponics Tower by Conr8r . This securely bolts the bottom of the hydroponics tower to a 3 or 5 gallon bucket lid. I have included my original ~220mm diameter design as well as one that should…

Downloads
226
Likes
95
Rating
0
P
PrintablesKlavvdi

Hydroponics Tower

Grow your own food or plants with a hydroponic growtower ! Since there are many models for hydroponic towers using a big old plastic container, i thought it would be nice to have something a little bit more aesthetic. So i desgined this…

Downloads
225
Likes
58
Rating
5
P
PrintablesShirt1492

Coke Bottle Adapter for Hydroponics (Gravity Fed, Self-Watering)

Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…

Downloads
223
Likes
23
Rating
0
P
Printablesbigshum

Drip Lid for Hydroponics

A drip lid for 6" pots to allow for the water supply to reach a larger range of the growing medium. Takes a 4mm inner diameter tube, inlet is 5mm to allow for a bit of stretch. I was asked to print…

Downloads
213
Likes
43
Rating
4
P
PrintablesPatrick Flick

Hydroponics NFT hex net cup

Hex pattern net cup for NFT hydroponics system. Designed for use with 2 in x 3 in downspout DIY hyroponics NFT system (see pictures) and 1.5in holes. The net cups fit into 1.5in holes and are 2 in deep. The inside dimensions fit rockwool…

Downloads
213
Likes
25
Rating
0
P
PrintablesNicolas Torres

Hydroponics Net Pot 50mm diameter

50mm diameter, 50mm tall net pot for hydroponics

Downloads
212
Likes
7
Rating
0
P
PrintablesScott C.

LED Grow lighting strips for your wire rack nursery or hydroponics!

Need to start your garden from seed indoors or provide lighting for your DIY hydroponics? This modular LED light strip system can be customized for your growing needs. Print file includes: 24cm LED strip (8mm) holders with end adapter,…

Downloads
202
Likes
59
Rating
0
P
Printablesgoofygrin

Hydroponics net pot seedling starter

I'm building https://www.printables.com/model/63055-upgraded-modular-hydroponics-tower-more-compact-st and I needed something to start my seedlings so I designed this really simple box to start seedlings. To make transplanting easier, I…

Downloads
196
Likes
68
Rating
5
P
PrintablesHoly

Deep water Hydroponics in recycled tins

Recycling the tins from your canned tomatoes to grow new tomatoes is a great way to reduce your impact on the environment and let's not kid ourselves: Homegrown always tastes better. This print-in-place lid for the standard sized food…

Downloads
194
Likes
82
Rating
0
P
Printablespolyvore

Kratky Hydroponics Blackout Sleeve for 32oz Mason Jar

This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…

Downloads
182
Likes
39
Rating
0
P
Printablesjulioviegas

IKEA Trofast Hydroponics lid for Aerogarden Pods x15

This is a simple model I put together for holding 15 Aerogarden pods on the smallest IKEA Trofast storage box. It fits the Trofast storage box found here: https://www.ikea.com/us/en/p/trofast-storage-box-white-70091412/ No supports and 5%…

Downloads
179
Likes
24
Rating
0
P
PrintablesATinyGreenCell

Falcoponics Lab Tube Hydroponics System

I made a simple collar to turn any used 50mL centrifuge tubes into a static hydroponic module. I have also designed tray lids for internationally standardized NSF Hotel Pans to allow 9 and 33 slots for hydroponic growth. This is an…

Downloads
178
Likes
56
Rating
5
P
Printablesprogl

Auto pot selfwater with quick bottle fix hydro hydroponics

Поддон гидропоника с автополивом с возможностью горячей замены бутылки без выкручивания и переворачивания горшка Возможность регулировки уровня. Внимание подходят не все бутылки большие а только плотные (из под минералки) - их НЕ должно…

Downloads
177
Likes
27
Rating
0
P
PrintablesPrintsAndPrints

No Substrate Hydroponics / Substrateless Hydroponics

Do you also love hydroponics, but you drown in substrate? Here is the solution for you! Indoor hydroponics without substrate. This gives the plant even more room to grow and you have to worry less about vacuuming the pellets that fell…

Downloads
176
Likes
67
Rating
5
P
PrintablesSullyhess

Aquaponics 2 inch plant pot holder for aquarium tank

Grips the edge of a fishtank/aquarium/aquaponics setup to hold a 2" plant pot. Could be scaled for other sizes.

Downloads
175
Likes
29
Rating
0
P
Printablesdbrgn

RAKO Hydroponics Pot + Lid

This design includes net pots for a DIY hydroponics system based on Utz RAKO container boxes. Size of the STL: Top diameter 60mm, bottom diameter 40mm, height 40mm. To use these with a Utz RAKO box, simply drill 60mm holes into the top…

Downloads
168
Likes
41
Rating
5

Hydroponics Net Cup Lid Support

This is a simple net cup lid support to stop a net cup from slipping through the lid of a plastic bucket or tote. The three holes are designed to fit wooden skewers to form a tripod shape and support the main stem. Works great for peppers…

Downloads
166
Likes
57
Rating
5
P
Printablesgoofygrin

LED Grow Lamp Holders for Hydroponics Tower

I originally added the LED arms and lights to my 5 gallon bucket with lid from here but they were really floppy. So I mixed the LED holder with the half spacer with no turn that I remixed from here. To get the lights far enough away from…

Downloads
165
Likes
27
Rating
5
P
PrintablesG4ZO

Aeroponics system for Cuttings (no support)

For this system you need: Transparent filament Water pump / Ultrasonic Mist /It is also possible to use an air pump like in an aquarium, but then the stem should be dipped in the water, and this is considered a type of hydroponics (DWC)…

Downloads
165
Likes
53
Rating
0
P
Printableshitchhiker4200

Bottle Kratky Adapter for Quick and Easy Hydroponics

These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I watch Hoocho on Youtube and they…

Downloads
157
Likes
22
Rating
5
P
PrintablesRxRick

Kratky Hydroponics Pod for Regular mouth mason jars

The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. Pod holds seed starting medium (coconut fiber, perlite or vermiculite).…

Downloads
149
Likes
32
Rating
0
P
PrintablesJB

Strawberry Runner Rooter Box for Dirt & Hydroponics

That is a perfect little box to let the Strawberry Runner grow some roots and easly plant them afterwards. it is a remix from Nigel Johnson and i fixed the screws holes for v3 and also added a dirt version, as i needed that.

Downloads
148
Likes
43
Rating
5
P
Printablesbjamdesign

Hydroponics - Rockwool Netcup

Updates 10/8/23 - WORK IN PROGRESS and I intend to publish some updates in the coming months. Current models are absolutely functional, and I am using them to grow greens today. Just wanted to make some changes to fit better in my…

Downloads
138
Likes
23
Rating
0
P
PrintablesSullyhess

Aquaponics 2 inch plant pot holder for aquarium tank

Updated the design so that the cup sits ¾" lower, it was too high unless our tank was 100% full.

Downloads
138
Likes
11
Rating
0
P
PrintablesMrSnid

Gardyn Hydroponics Cover

Printed at a .2mm layer height with TPU. Measure 35.3mm x 35.3mm x 4mm

Downloads
137
Likes
20
Rating
4.5
P
PrintablesDenon Tentis

Ring plant support - Modular rotating hydroponics tower

Ring support for larger or hanging plants. It fits on the modular hydroponics tower system . Please note, this was printed on a large printer, 36x36cm. Lowered the original Module_Spacer_40mm to save materials.

Downloads
136
Likes
18
Rating
0
P
PrintablesRichH

Bell syphon for aquaponics

Bell syphon I made for an aquaponics system. This is the outer bell, with a hole in the top to insert some aquarium air line tubing to help break the syphon. I have added 3 STL's. One is the entire thing (not sure how well this will work…

Downloads
122
Likes
23
Rating
0
P
PrintablesJeff Weil

Gardyn Hydroponics ySleeve

Tend to your Gardyn hydroponics plants without spilling water all over the place. This ySleeve will hold your yPod while it is out of the system for harvesting or plant maintenance. It has cutouts on the sides to make it easy to remove…

Downloads
120
Likes
21
Rating
5
P
PrintablesBobino

Vertical/hydroponics garden

The first picture shows how it might look and the second one how it looks right now. For this vertical garden you will need a 110 mm PVC tube, 73 mm hole saw and some base. Just cut the 73 mm holes in the tube in a pattern of your liking,…

Downloads
115
Likes
48
Rating
0
P
Printablesdoc_krieger

Modular Hydroponics

This is my first attempt at a modular hydroponics. Made the sections so that you can connect them in a modular fashion. Printed using PETG: - 4 top and bottom layers, 4 perimeter layers - 25% infill Baskets:…

Downloads
114
Likes
14
Rating
0
P
PrintablesLucidWolf

Micro Hydroponics Bubble Pump in Jar/Pot

EDIT: Added Trellis for my cherry tomatoes. Using bamboo skewers (4mm dia). I tried using the mini hydroponics tower from turboprint3D and I had a few issues that I addressed in my own take on the idea using his parts as reference. The…

Downloads
114
Likes
28
Rating
0
P
PrintablesKayakW

Modular Hydroponics Tower - New Base Fitting

I hated the look of the PVC pipe and fittings on my model so I remade the base. With this model you would just need to cut out a circle in the lid to insert this piece into your bucket of choice. Obviously this isn't as stable as the PVC…

Downloads
113
Likes
12
Rating
0
P
Printablesrosereth

Hydroponics Tower

This model is entirely modular, so all parts fit together seamlessly. Other hardware (water pump, timer, 3/8" tubing, and a pond (I used a bucket, but if you want fish, maybe look into a larger pond)) is not included, so some additional…

Downloads
107
Likes
12
Rating
0
P
PrintablesCrazyCarrot77

Desktop Aquaponics System

4 tier hydroponic system, with built in bell siphon system in each partition. Centre based water distribution.

Downloads
105
Likes
40
Rating
0
P
PrintablesSniffle

Adaptapod Adapter for Modular Hydroponics Tower w/ Grow Lights

We often use our aerogarden to start seeds, and then transplant them into our larger tower garden to actually grow. The adaptapod by Fryd3r is a great printed system for the aerogarden. Aerogarden Adaptapod by Fryd3r and our large tower…

Downloads
104
Likes
21
Rating
0
P
PrintablesNoeG

hydroponics 3 way tower added supports for distributor plate & slimmed

This requires less material (but is still strong). The added notches at the top so that one can add a distributor disc to better focus how the water hits the plants below. (Uploaded model was a test article, I haven't yet fully explored…

Downloads
102
Likes
16
Rating
5
P
PrintablesIOerror

Hydroponics support ring for 5 gallon bucket

After printing the tower base I noticed the bucket lid wasn't very thick and flexed a lot. So I designed this support ring to mount on the under side of the lid to help support the tower. It doesn't remove all the flex but it helps a lot.

Downloads
101
Likes
18
Rating
0

Bioponics Seedling Tray

I created this seedling tray because i could not find locally more seedling trays. I made it like this after some documentation found on the internet. Print instructions Printer Brand: Prusa Printer: MK3S+ Rafts: No Supports: No…

Downloads
101
Likes
18
Rating
0
P
PrintablesTechnoVardo

Modular Hydroponics Tower - No Splash Lid

There's a lot of variations on this out there, but here's mine. It turns the water back down instead of coming through the air holes.

Downloads
100
Likes
9
Rating
0
P
PrintablesJan Caletka

Semi hydroponics pliers

Pliers for easy making holes to the pots for semi hydroponics. Helps prevent crack of the pot during drilling. Tweezers are for deeper flower pots. Video tutorial: Model is made in Onshape:…

Downloads
99
Likes
32
Rating
0

Hydroponik Erweiterung für gängige Mini-Gewächshäuser (Hydroponics for mini green houses)

Mit diesem Set machst du aus einem kleinen Mini-Gewächshaus (Amazon) mit den Innenmaßen 165mm x 125mm ein Hydro-Anzuchstsystem. Als Anzucht-Substrat verwenden wir für die kleinen Pods herkömmliche Watte. Darum die konische Form der Pods.…

Downloads
98
Likes
29
Rating
5
P
PrintablesFrankL

Modular Hydroponics Tower for Euro Boxes

Modular Hydroponics Tower for Euro Boxes Model 1, as of June 18, 2024 Before you read this… Please note, that this tower model was designed for stability, optimum flow and easy handling. If you are looking for something that is fast to…

Downloads
98
Likes
21
Rating
0
P
Printableskcarhart

Hydroponics Net Cup 3 in. to 2 in. Adapter

Print and place inside a large mouth mason jar and tighten the lid.

Downloads
96
Likes
18
Rating
0
P
PrintablesRed Rooster

Microgreens Hydroponics Growing Tray

I made it into two pieces so that you can easily drain a tray from water without having to remove everything

Downloads
96
Likes
20
Rating
0
P
PrintablesShirt1492

Mason Jar Adapter for Hydroponics (Gravity Fed, Self-Watering)

Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…

Downloads
95
Likes
10
Rating
4
P
Printableshidara

Backyard hydroponics

56 plants in less than 2 sq metres. DIY hydroponics NFT (nutrient film technique) Print Settings Printer: Cr10 modified Resolution: 0.25 Infill: 25% Filament: eSun PLA+ Black Notes: Frame 150x25mm treated pine 90mm down pipe Pipe holders…

Downloads
95
Likes
32
Rating
0
P
PrintablesPocoPrint3D

Aeroponics Tower - Modular & Low Material

TLDR: 100mm Aeroponics tower designed to be modular to use minimal amount of material without compromise to strength. eg. 1 mid section takes only 100grams of filament to print for an idea. Spouts are 49mm wide - I used net pots off…

Downloads
93
Likes
12
Rating
0
P
Printables3DOM

Hydroponics Tower Growing Clip

This hydroponics tower growing clip snaps easily onto most tower tubes, giving your plants a stable support point as they grow. It prints without supports, installs in seconds, and helps preventing bending or breakage. Perfect for leafy…

Downloads
93
Likes
2
Rating
0
P
PrintablesTheWildChives

Hydroponics netcup (52mm)

This is a hydroponic net cup that I designed for my first trials with growing lettuce using the Kratky method. It should fit holes between 52mm and 62mm and can be printed without support. I printed it with some old PETG, but any material…

Downloads
93
Likes
12
Rating
0
P
Printablesbanjostan

SPIDER FARMER Hydroponics Growing System Insert Half

Insert for SPIDER FARMER Hydroponics Growing System. Print 2 Use higher % infill to reduce light.

Downloads
91
Likes
21
Rating
5
P
PrintablesBoysie

hydroponics nft net cup for 28mm hole in a pushfit 40mm pipe blocking light

hydroponics nft net cup for 28mm hole in a pushfit 40mm pipe The push fit pipes are actually 41.9mm but sold as 40mm so adjust using scale if diffrent pipe size. This will allow you to block out all light, I use 1 cotton wool ball in each…

Downloads
90
Likes
14
Rating
0
P
Printablesbrain_no_work

Hydroponics Module 4-way NOT hollow; has diffuser

I wanted a 4 way planting module with the water diffuser, but the model wasn't in the original files, so I just split and merged two modules. Enjoy

Downloads
89
Likes
18
Rating
5
P
PrintablesNathan Ragoobar

3/4" PVC Pipe Clamp Support for Dutch Bucket Hydroponics

This is meant to easily attach a ¾ inch PVC pipe as a feeder line for Hydroponic Dutch Bucket System that use a 5 gallon bucket with a lid. How to use: Drill a 7/8 inch hole in the top of the bucket lid. Place Clamp Support in hole Drill…

Downloads
88
Likes
10
Rating
4
P
PrintablesThatJdmGuy

Hydroponics tower dispensor with holes

i found the file for the dispensor with holes. Happy growing!

Downloads
85
Likes
3
Rating
0
P
PrintablesGordyt47

2 inch netcups for hydroponics 3 versions

2 inch netcups for hydroponics 3 versions Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: matterHackers.com PLA Black Notes: 2 inch netcups for hydroponics 3…

Downloads
83
Likes
3
Rating
0
P
PrintablesSascha Uncia

Mung Bean Bubbleponics Sprouter

A Mung Bean Bubbleponics Sprouter which uses an air-stone and pump to grow healthy sprouts. The airstone provides oxygen to the roots and prevents stagnant water, a classic hydroponics system applied to sprouting. Mung Beans are…

Downloads
82
Likes
14
Rating
0
P
PrintablesBrock

Vinyl Gutter End Cap for Hydroponics and Aquaponics

These end caps silicone onto vinyl fence posts sleeves to turn them into NFT gutters.

Downloads
81
Likes
29
Rating
0
P
PrintablesDanielOnneweer

Germination setup for hydroponics

This germination setup consists of a reservoir which can hold water or a hydroponic nutrient solution, and six connected containers which hold the growing medium in which seeds can be germinated. I designed this model to conveniently…

Downloads
80
Likes
12
Rating
0
P
PrintablesNick

Mod Pot (Modular Aeroponics Grow System)

A 3d printed modular Aeroponics System I've been developing over four years. It has many benefits: Specifically designed to be 3D printed. All parts are designed to fit within the volume of a Prusa MK3 printer or larger Allows for direct…

Downloads
75
Likes
41
Rating
5
P
PrintablesPat_S

Pot for water testing for Modular Hydroponics Tower by Thingiverse (5712775) / Topf zur Wasserprüfung für Modular Hydroponics Tower

Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…

Downloads
71
Likes
9
Rating
0