Counting matching models…
S ummary: Four piece ergonomic handle to securely and safely hold reciprocating (Sawzall) blades. Uses three M4x16 machine screws and nuts. Hardware Note: Before printing be sure to select the correct “Right Handle” for your hardware. One…
Allows you to strap in a can of spray paint and attach to a reciprocating saw blade and install in a reciprocating saw such as a "Sawzall". You will need a hook and loop strap as well as #10 or 4mm bolts and a spare blade. Print Settings…
A sturdy mount for the Makita reciprocating saw but it will probably fit other brands as well
1 wide 6 long 5 standard “units” tall 3 sections lengthwise designed to hold the longer style blades up to around 1" tall has pull tab for labeling/picking up finger cutouts to pick up blades no supports required w/ part cooling print…
Requires two m3 bolts and two 5x5mm square nuts. nuts must be placed during printing! I didn't use it for heavy cutting. My dad asked for a handle like this, he uses it when fishing. probably takes the scales off the fish
Tired of shaking paint bottles by hand? Don't want to fork over $30 for a nail polish shaker? Rather fork over $50+ for a saw? Already have a reciprocating saw? Then these are the attachments for you! Have a paint bottle you want an…
Fits 12 reciprocating saw blades up to 9" long. Attach the lid with string so it won't get lost
Print on it's back, it shouldn't need supports. This mount contours to the tool and holds it against the wall for easy access.
This is two handed saw handle. As far as i know this is the only one that is long enought to comfortably use it with both hands. I recommend using old broken drill bit as a pin for the blade. It is really hard to find 3,5mm screw, and…
I wanted some larger toolheads for my new DSPIAE sander and came up with this initial set. These work very well for me and are a nice start at developing a more complete toolhead set than provided by the manufacturer of this neat little…
I couldn't find a suitable box for reciprocating saw blades, so I made one myself. The box is available with and without logo (Bosch). Suitable for saw blades from 100 to 250mm length, increments 50mm The hinges are designed so that…
Allows the spray paint can to be magnetically attached to the sabre saw blade. This is a remix - changed mounting to 3mm screws, can clamp and bottom lock.
Quite accurate model of Milwaukee sawzall blade. However, the real blade has a little bit of curve to it and the teeth are bend out. Will be good help when creating your own custom handles and blade protectors.
This is a very crude and simple design meant to hold additional head sets for the DSPIAE reciprocating electric sander tool. The case the tool comes with has space for the initial 8 heads, but as someone who uses multiple grits in each…
Like Face_Rollan, I needed a longer shaker, because the shoe isn't removable on my saw, Unlike Face_Rollan, I use Vallejo paints. Print Settings Printer Brand: Monoprice Printer: Maker Ultimate Rafts: No Supports: Yes Resolution: 0.16…
A case for reciprocating/sawzall blades. Holds blades to 250mm long. It's designed to make it easy to access the saw blades. Uses eight 10x3mm magnets.
Simple wall holder
I found the part that goes in the saw was to short for my big saw, so I made a Longer blank that I just glued on.
This is a model of a reciprocating motion mechanism. The model shows conversion of rotary motion to a linear motion - An application used in various forms of Engines. This is model can be a useful tool for educational purposes. This is an…
As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.
A simple reciprocating rack and pinion mechanism in the same style as the ones by https://www.printables.com/@A548 Adam you will need 1x screw M3 8mm long
Full tutorial: https://learn.adafruit.com/rack-and-pinion-bot/ Reciprocating Rack and Pinion Learn how to create an automated geared mechanism with hypnotic motion. Use the Adafruit CRICKIT and Circuit Playground Express to make it dance!…
Based on the original design to suit the saber / reciprocating saw. The hook prevents it falling if bumped. Uses the original counter sunk screw mounting but at a different depth. Recommend a 40mm screw for ~13mm of protrusion. I have…
Mount 14 of your recip saw blades to Wall Control using this handy holder. Project includes the rest of the components required for a complete model using 2 of these mounts for a total of 28 blade capacity. See the base project for…
Remix of Flascherl's blade box to be just a bit deeper and store metal cutting blades.
Same as the previous version MK1. The handle consists of 2 printable parts: “HandleMainpartMK2” and “HandlePresserMK2”. They join together with 3 pieces M3x10 bolts + 2 standard washers and a nut for each. See the 3rd included part named…
printed in pla, coloring is happend in prusa slicer;
The handle consists of 2 printable parts: “ HandleMainpart ” and “ HandlePresser ”. They join together with M3x10 bolt + 2 standard washers and a nut. See the 3rd included part named “HandleSeat”. That is a small section of the handle…
A can (e.g.: spray can) can be held magnetically and/or via a strap to a reciprocating saw blade with this attachment for a blade. Completely remodelled and STEP file available for easy editing. STL export also included.
This tool hanger is designed as a way to hang the reciprocating saw (commonly known as the Sawzall)> Nothing fancy but quite functional. Tapered so as to fit various manufacturer models. It can be mounted both top and sides. Let me know…
This is a remix of oly 's Gridfinity Reciprocating Saw (AKA Sawzall) Blade Storage Bin which he created using https://github.com/kennetek/gridfinity-rebuilt-openscad . His is for 9 inch blades, and I needed one for 6-inch blades. He…
Just a simple holder for 6" reciprocating saw blades. Hang it on a hook, over a screw, on a pegboard. Holds about 8 blades stacked. Use blender to adjust height as necessary. Normal print settings for PLA or PETG.
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a DeWALT 20V Reciprocating Saw clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the…
Original model was designed to print upright resulting in it needing supports, and the layer lines ran perpendicular to the primary load direction, making the part susceptible failure under weight. This remix prints flat, aligning the…
“I ain't killin' you bub -- I'm not makin' it that easy on you! I've decided that for what you did, you're gonna pay for a long time!”
This is a model optimized for 3D printing, 245 and 205 mm sawblade compartments, the depth has been increased by 5 mm to store tall sawblades For greater durability of the hinges and latch attachment in the slicer, you can add modifiers…
This holder was designed to securely store an Ozito 18V reciprocating saw on a Multiboard system. It holds the tool vertically. The mount is a press-fit design that attaches directly to Multiboard snaps. I used the Raised Moderate…
Ever wonder if your toothbrush could do more than just, well, brush teeth? Ever have the issue of just brushing your teeth with traditional bristles feeling a bit too... mundane ? Introducing the revolutionary 'Tooth-Be-Gone' adapter!…
This is a replacement blade for a Just Like Home toy reciprocating saw. FreeCAD files are attached, if anyone wants to remix it!
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
This is a simple dual-slide movement demonstrator. This is essentially the same motion the cylinders in a V-configuration, four-stroke engine make. To build, you will need to print: (1) Base, (1) Thumbwheel, (2) Conrods, (2) Slides, and…
Special design of the holder with stable mounting with T-clips for DSPIAE Reciprocating Sander. For connecting the front panel need 12x M3 countersunk screw and Thread inserts. Print Settings Material: PLA Rafts: No Supports: No Nozzle:…
This is a very simple, low-profile, two-screw, wall mount for the Ryobi PBLRS01 reciprocating saw. The tool was scanned (using a Creality CR-Scan Ferret SE), and the scan was used as a template for the mount surface. This mount is vastly…
This is essentially a re-mix of a Crank Mechanism by Adam, but with a few modifications.
90 Degree Reciprocating Cam I designed, it moves up and down pretty fast, fun to fidget with. It's easy to print with default settings, all pieces on one file just split it up and easy assembly, have fun! My TikTok of this here…
This is a pegboard mounted holder for the Diablo DS006S Reciprocating Saw Blade Set Blade Storage Case . The design is optimized for easy grab and go retrieval and replacement of the tool. It self-aligns the tool and provides security…
Built for the MODRA modular system, this mount ensures a perfect fit and secure hold for your Milwaukee M18 FUEL SAWZALL Reciprocating Saw. Print it, click it into your MODRA board, and rearrange your workspace anytime—no tools required.…
i would print with the complex side up and 20% infill 2 perimiters
Built for the MODRA modular system, this mount ensures a perfect fit and secure hold for your Milwaukee M18 FUEL SAWZALL Reciprocating Saw. Print it, click it into your MODRA board, and rearrange your workspace anytime—no tools required.…
These are inserts for the bottom of aerosol spray paint cans for when using a mechanical shaker (Sawzall, reciprocating saw, other), so that the bottom of the can does not deform and dent excessively from the rapid agitation of the…
The reciprocating version moves back with the internal piston as it cycles (Use at your own risk!!!). Also remixed from narangdlover over on thingiverse SMC-9 custom charging handle assy by narangdlover - Thingiverse
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
This is a model optimized for 3D printing, 245 and 205 mm sawblade compartments, the depth has been increased by 5 mm to store tall sawblades For greater durability of the hinges and latch attachment in the slicer, you can add modifiers…
Original model was designed to print upright resulting in it needing supports, and the layer lines ran perpendicular to the primary load direction, making the part susceptible failure under weight. This remix prints flat, aligning the…
As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.
Print on it's back, it shouldn't need supports. This mount contours to the tool and holds it against the wall for easy access.
Hook for hanging Ryobi Reciprocating Saw (PCL515) Printed with PETG 30% infill. Requires supports, printed up side down
Printed with Spectrum Sulfur Yellow PCTG (pictured) 0.6mm nozzle, 5 walls 50% infill
A holder for the ONE+ Reciprocating Saw from ryobi mounts with the big thread plainhead bolt from multiboard print: 3 walls 0.2mm layer height 15% infill PLA+
Wall hanger for Dewalt DCS397 compact reciprocating saw.
A good budget saw, but with a big drawback, in the form of an open mechanism, into which shavings and dirt fly. This cover corrects, this drawback. Mechanism overlay for:…
Works great for holding the Makita 18v reciprocating saw. I wanted a hook with a heavier back plate that accepted larger screws so the back plate has been thickened as well as elongated. Print Settings Printer: Sidewinder X1 V4 Rafts: No…
Extra blade for broken reciprocating saw toy. On the photo with the rest of the original piece
Reciprocating Drive Fidget. Bill of Materials: 1 Handle (support touching build plate) 1 Piston Guide 2 Pinions (support touching build plate) 2 Pinion Caps 2 Pistons 2 Piston Caps 2 Gears I recommend print the pinions before the gears,…
Print It Inset Bottle Secure the Bottle With Tape Insert the shaker into a Saw (Variable Speed Cordless Reciprocating Saw) Gently pull the rigger (slower is probably better) Remove and enjoy thoroughly mixed paint!
Basic wall mount for a reciprocating saw. I have only really tried this model with makita and dewalt saws, but I don't see why it would not work with most. If you print this, please post the saw you used it with for others. 12mm diameter…
