12,702 models
A rope spirals around to create a small bowl. This is part of my Rope Series. You can view all of my Rope Series models in this collection . Print Settings No special settings needed Buy Me A Coffee The following filaments were used in…
Print approx. €8.41–€10.27 excl. taxPreliminary estimate for one variant
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
Updates description at the bottom Overview A model of a variable pitch propeller mechanism based on a 1935 patent by Robert Stanley, adapted for 3D-printing. Variable pitch propellers allow the pilot of an airplane to adapt the angle of…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
A simpel fast and easy to print trophy award. No supports required. Looks great in metallic colors.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
I printed mine in PLA, it's easy enough to snap the pieces out with hand and clean off the knobs with a pocket knife if you want to. EDIT: removed the tight variant, as it proved to be too tight
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
A simple stand that turns a regular sheet of A4 paper into a seamless "infinity" background for photographing small objects. The paper slides into the side supports, creating a smooth curved backdrop without visible corners. The side…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
The super simplicity of a Tyrap / Tie-Wrap / Zip-Tie translated to use with a rope. Ever hung up a clothesline or something else hanging from a tree on vacation? Always that fiddling with tying the rope and untying it again at the end of…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Will fit 4mm (~1/8") diameter paracords. Eyelet diameter is 7mm (little over ¼"). Obviously not suitable for safety relevant applications. Changelog 2025-02-23 v4 added files for 0.4mm nozzle 2022-03-15 v3 complete redesign with smaller…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
A simple teaching aid to locate European countries and identify their flags. It is designed for students aged 12 to 15.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Perfect for pulling cords - Easy To Print Further scalable in the slicer software
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Its a prop os a flash Grenade:) If u find some error please comment!
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for one variant
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Fits a Type I Outlet. This is modeled after a 15⁄16" Female ACME. This should fit barbecue grill cylinders manufactured after October 1994. I printed with PETG 0.15-0.20 layer height.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
The crown coming from the book The Cruel Prince by Holly Black . === 140mm inner diameter / 45mm height / ~50g depending on infill and material (In my case I printed it in black PLA and painted it gold afterward: See in comments/makes)…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
Special design of joint case made by ROPI. ASA, PETG, PLA - all fillaments will fit, easy to print. Supports - NO! We can print this model without supports. Use Brim to make sure whole print is stuck to the printing bed. Fits well with…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Garden watering can sprinkler / Kropítko na zahradní konev
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for PETGSource material: PET
We all know someone who could use this: perhaps to commemorate a specific event, or maybe just because it matches their sense of humor. OpenSCAD files are included so you can customize it. Almost all the customizer parameters are…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Changelog Paracordlock 2022-07-03 v2.1 increased holding force for cords with smooth surface 2022-07-02 v2.0 initial public release Tool 2022-07-02 v0.5 initial public release Paracordlock Will fit ø2mm/1.9mm diameter paracords. Obviously…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Arjen Robben : Soccer Player : Trophy
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Made a pingpong trophy as a present for a company. For the crown I used the model made by: mjmedien, https://www.thingiverse.com/thing:195852 and made it so it can hold a pingpongbat at an 5 degree angle. The slot where the bat sits in is…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
GRAVITRAX ; Wanted to drop the ball through the plate but the height stones are in the way? Now just drop the ball through the height stones, just print your own! GRAVITRAX; Height stone 40 mm with 14 mm diam. hole and roll out…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
This 3D model is a trophy design proposal for the 2024 3D Printing Industry Awards Trophy Design Competition . Hosted by 3D Printing Industry (3DPI) , the awards celebrate excellence in the additive manufacturing sector, highlighting the…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
I saw the contest 2 days before it ended and my first thought was this picture which is of course ‘older than the internet’. I checked the entries for something like that and found:…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
A quick Throwing Axe Prop I mocked up after going down the competitive axe throwing YouTube hole. It's made to print in two pieces without support. I've printed it with the following settings: .4mm nozzle .2mm layer height PETG 3…
Print approx. €7.05–€8.61 excl. taxPreliminary estimate for PETGSource material: PET
Ever want to get into hydroponics (growing plants in water), but only had a bunch of mason jars? Well, if so, here's a solution for you. Get your own hydroponics garden in under half an hour! Assembly/Usage: Replace inner portion of mason…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
I recommend printing as large as possible.
Print approx. €3.06–€3.73 excl. taxPreliminary estimate for one variant
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I designed this specifically for a 26.4 mm diameter stanchion dropper post for 1" straps, and later added a version for a 22 mm stanchion dropper post, both for 1" and 2" straps based on the requests of others. I had earlier purchased a…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Print your own 1:490 scale model of the Northrop B-2 Spirit aircraft! The B-2 Spirit is designed with advanced stealth technology to make it virtually invisible to radar. Its shape, materials, and coatings minimize its radar…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
"How can I get this rope up there ??" You don't need this tool... until you do! Simple to print, and should fit on any broom handle or extendable pole with a tapered end. You can optionally add screws to prevent it falling off the end.…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks. Nonetheless, the original design is not usable for FDM due to…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Simple cleat. Can handle up to 14 mm line. Two 6mm fasteners required . Depth of hole from shoulder to base of cleat is 20 mm. The fastener should be at least this length plus whatever surface one will fasten to and enough for the bolt.…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
⚠ Note: This is the third version of the ROPI grinder. It introduced reinforced durability, stronger magnet holders, and a brim variant for tricky print beds . If you want the latest and fully refined version with even smoother grinding,…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
As I got Aeropress GO and Fellow Prismo “espresso” filter, there were no chance to hold them together covered by that nice red cap. So after few iterations, there is a mug extension, that can now hold not just Prismo but event filter case…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Simple key replacement for electrical cupboards found in Europe, printed in PLA on ender3 used a 45 degree angle to combat splitting on layer lines during use
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
You wanted it so badly - here it is - Europe with Denmark
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for one variant
Private Property No Trespassing Plate This 3D printable model is a warning sign with three dimensional human bones, skull and English text. It is intended for installation on a door, cabinet or any board or object. You can put it on your…
Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
These brackets work perfectly for my DIY version of the VFLAT World photography brackdrop/background system. I made mine out of wallpaper, posterboard, and foam board from the Dollar Tree. Works great! Print 2 for a complete system.…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Another variation of t.bone ovid/DPA microphone Intended for the left/bass side of accordion to attach the microphone to the accordion belt. Intended to use with this ebay cable organizer .
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Hi all, I love coffee and for its prepare I use AeroPress. I take it with me almost anywhere. But problem is with paper filters. Where storage them? I made for this issue an extension, which you can put on the bayonet, on top of the…
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
ver. 1.0 the arrangement of the internal air flow and the associated greater weight load to prevent floating you need: layer 0.2mm nozzle 0.4mm support under intake pin 100% infil
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for one variant
Layer height: 0,15mm no infill PLA/PETG (doesn't matter) Check 3mf project file for cool settings
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
The pots are designed to be a simple as possible utilizing ‘deep water culture’ hydroponics. The seed is germinated in a 20mm diameter rockwool plug which is placed in a perforated basket in the lid of the pot. The pot is then filled with…
Print approx. €2.70–€3.29 excl. taxPreliminary estimate for one variant
***Update*** I have uploaded a version of the design with a smaller overall diameter This waterbottle drying stand works just like my other designs, but theis one is adjusted to the glass waterbottle from waterdrop. It has a large base…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
plastový držák - IKEA LOCK 16418 STROPNÍ SVÍTIDLO
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a trophy with space for a nameplate. Use the provided 3mf with the newest 2.6 Slicer (https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.6.0-alpha5) if you want the text to appear. Make the model custom for you! I have…
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Jednoduchá pomůcka pro určení geografické polohy jednotlivých států Evropy včetně poznávaní vlajek států. Pomůcka je určena pro II. Stupeň základních škol.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Cyclist Trophy created in honor of MVDP's victory today at the Milano-San Remo cycling monument . After an amazing finish, he defeated Tadej Pogačar and Filippo Ganna. Wonderful cycling! The model is going to the printer right now. A…
Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant
This is a larger-than-life size wedding ring prop that I designed to be used in a photo booth at my reception. It's big enough to slip about halfway up my arm, and it scales really well if you'd like smaller/bigger. Printed in PLA with 3…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
An easy to model and to print trophy. Sldprt. file in the downloadable files. Download the 3mf file and use the supports that I have painted.
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Just because it has Go in the name doesn't mean you can't use it at home! This is a remix of @gmarsh23's excellent AeroPress Organizer Station. It fits on a Prusa Mini because I ditched the handles and made things a bit more compact.…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET
I'm remixing the Polly the Propagator Ball designed for a 20mm branch — itself a very nice 3D-printable interpretation of the classic air layering pod/ball/box, a version of which you can make by recycling any appropriately-sized plastic…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Lock in a heart shape - great as a party prop, gift or decoration. Not functional. :-))) I recommend printing separately in different colors. It works even without gluing, but it´s definitely an option. :)
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
This model is especially designed for Tropicana © juice bottles and allows you to recycle them into a good size watering can for your seedlings or indoor plants. The whole thing can be printed in PLA, but for a better seal, I recommend…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Horizontally standing, stackable color dropper bottle rack for 14 (two rows of seven) Vallejo, Army Painter, … colors, primers, washes… It is designed to use space as efficient as possible, so that we can get more paints. 😉 The shroud was…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Some of my succulents had gotten pretty leggy, so I designed this propagation tray to fit on my windowsill. It's designed to be a quick print, printed in vase mode. My settings (the 3mf and gcode reflect this): PETG 0.6mm nozzle 0.3mm…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET
A rope winder for 2mm rope. Originally intended for 2mm arborist throw line.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Thimbles are very handy when making end splices. Yet for some reason I always have the wrong size for the type of rope I'm using….. That's why I made a CAD model. I made 4 standard sizes and included a STEP file so you can make your own!…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Pour faciliter la construction de https://www.printables.com/fr/model/417978-fusee-hydropneumatique, améliorer ses performances et le taux de fiabilité, quelques modifications. - Allégement de la coiffe 66g → 40g - Impression du ressort…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Für unser stallinternes Turnier brauchten wir noch einen Pokal für die Hundedisziplin. Da sich nichts geeignetes fand, habe ich den Pokal kurzerhand in Fusion entworfen und anschliessend gedruckt. Das Oberteil habe ich in PLA Gold…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
2inch Net cup for Hydroponics systems, non-stackable, print as needed. RECOMMEND PRINTING WITH PAINT ON SUPPORTS FOR LIP ONLY For use with Rockwool, not tested with clay.
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
This is the generic mount I use for all of my ws2811 RGB Christmas props. There is a ¼-20 hole on the side for adding a set screw. Prints a bit tight, but intentionally so to help keep the screw set in.
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for PETGSource material: PET
The first picture shows how it might look and the second one how it looks right now. For this vertical garden you will need a 110 mm PVC tube, 73 mm hole saw and some base. Just cut the 73 mm holes in the tube in a pattern of your liking,…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
I modified the front bumper from the original Landy by 3D sets to suit a proper camel trophy truck. it fits directly on the Landy model without modification for the ultimate "expedition look". I printed it in PETG 0,2 mm 15% infill. you…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Print your own 1:490 scale (estimated) model of the Northrop Grumman B-21 Raider aircraft! The B-21 Raider is designed with advanced stealth technology to make it virtually invisible to radar. Its shape, materials, and coatings minimize…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Another variation of t.bone Ovid/DPA microphone holder intended for universal use. Needs one of Parkside clamp set 35x33mm , one M4x25mm screw as a replacement for original one and one M4 nut.
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
The RODE wireless go II microphone can easily be converted to a handheld interview microphone I printed this at 0.15 layer and I used the following SM7B windscreen…
Print approx. €7.19–€8.79 excl. taxPreliminary estimate for one variant
I made my own quadrant panel based on the CadetThrottle but was not satisfied with having two mixture control knobs so I designed a more adequate Propeller control knob as found in some Cessnas. CadetThrottle: Vernier-Style Sim Controls…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
I printed about 50 of these, with a total filament/material cost of just over $100. This will save our Pack several hundred dollars a year. Get started early as it can take a few weeks to print them all. Any tips received for the model go…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for one variant
Der Abtropfen hilft, dass sich in der Flasche kein Kondenswasser sammelt und richtig trocknen kann. Die Flasche steht dadurch fest und fällt nicht um. Habe für meine Freundin 3 Stück gedruckt und sie ist begeistert. Habe es nur für die…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the newer propane bottles that have threads on the inside and outside. It's the same model, but this one was shortened to…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
I noticed user Bethaney Call had mentioned in the comments that at some point in the past there was a planting module without diffuser sieve. As I figure plants with longer roots may get entangled in the sieve, I wanted to have a separate…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
Organize your optometry clinic with these sets of bottle holders! These bottle holder holds are made completely from PLA and match various numbers of bottles and also bottles sizes! The regular 4x2 and 4x1 holds all TPA drops such as…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
I changed the handle to fit a logo clip for our school news. Used Sunlu black PLA Printed on Creality CR-10
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Got a small space on your desk somewhere you want to confine all your eye drops to? Here's the solution for you! The Honeycomb is smaller than the ADMeyeR series drop holders but will still organize your desk perfectly. The best part for…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
A RFID DROPLET CASE for your public car charging tag. I created this small case to encase my RFID charging ‘droplet’ tag. The opening for the keychain broke after a few weeks of usage, so I needed to fix this. This case is a simple print…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I changed the handle to fit a logo clip for our school news. Used Sunlu black PLA Printed on Creality CR-10 Edit… I have added a plate for a logo. I made two versions one is all in one piece and the other is in two parts.
Print approx. €4.35–€5.31 excl. taxPreliminary estimate for one variant
Components list: LED filament purple 3V LED filament cold white 3V (I put the LEDs the wrong way up in the schematic) Speaker 36mm MOSFET 2x (pretty much any N-channel enhancement mode will do - wrong symbol in schematic) Schottky diode…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
This mini-Orion space capsule is perfect for your classroom lesson on human spacecraft. A parachute can easily be tied to the ring for a competition in capsule return via parachute drop. Update: Added V2, which is scaled to 85% the…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
