193 models
This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
Removed the name tag from the case and cut the model in upper and lower part to allow it to be printed in 2 colors.
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
This mount is designed to attach an ESP32-CAM microcontroller to an gas meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it is possible to read the…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
This is a remix of the top half of the Raspberry Pi 4 case created by plammers to include extra height to allow the fitting of the official Raspberry Pi 4 POE HAT.
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
This bracket was exactly what I needed to mount my standard Raspberry Pi camera in my printer, unfortunately the bracket was a bit too big for the Raspberry Pi camera V2.1 so I printed a smaller bracket, but it is compatible with the rest…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Mit diesem Druck kann ein Magnetsensor optisch ansprechend an einem Pipersberg G4 Gaszähler befestigt werden. Der Druck enthält eine Mulde im Boden, die mittig über der zweiten Nachkommastelle angeordnet ist. Um den Zähler auszulesen muss…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Wall mount basket iPhone 12 ProMax and remote Sber TV Корзина для настенного монтажа iPhone 12 ProMax и пульта дистанционного управления СберТВ.
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
Ausschnitt/Relief der Stadt Bigge/Olsberg - NRW - Germany
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Die Anregung für den Starlink Kederleisten Adapter kam durch Gogo 4 Camper. In seinem Video hat er einen Starlink Adapter für seinen Wohnwagen vorgestellt. Dieser passte auf unseren Wohnwagen gar nicht. Von seinem Adapter ist nur noch die…
Update 16.12.2022: Auf Nachfrage hab ich die STEP Dateien hochgeladen. Der Halter dient dazu, einen ESP32 Cam auf einem Pipersberg G4 RF1 c Gaszähler zu befestigen um diesen per Bilderkennung auszulesen. Bisher habe ich den Gaszähler…
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
I really wanted to print my own Magpul forend for my Mossberg 500. Unfortunately, my tube was the shorter 6 ¾" length which meant I needed to purchase an adapter or a whole new longer tube. I decided to remix the Magpush by Cursd using…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
Halterung für Pipersberg G4 RF1 c Gaszähler Da mein Versorger mir einen neuen Gaszähler installiert hat und mir der verfügbare Cyble Sensor schlicht zu teuer war, hab' ich mich entschieden das Ding mittels LJ12A3-4-Z/BX Näherungssensor…
Mossberg Tactical Shotgun for Dummy 13
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the Raspberry PI 4 Model B with a Noctura 5V 40mm fan.
Printed with 3+ perimeters for strength (.4mm or .6mm). PETG is ideal for being robust. Remove receiver pins x 2, and replace with #10-32 x 1-¾" bolts using slim nyloc washers on the back. Good retention for 3" 00 shells and others of…
I used the holder with the Raspberry Pi wide-angle lens with a focal length of 6 mm. See technical drawing for exact dimensions. Print PLA 0.2 mm layer height printed as four pieces joint 2 w/ support 20% infill Additional material M2x 8…
The source marked this model as adult content.
Just another Eisberg Napkin holder, but made this with thinner walls (strong enough)... Print settings: 4 walls 4 top/bottom layer 15% infill Happy Printing…
Having bought this airsoft shotgun replica I found that it had no means of aiming as that it is a "breacher" model. Wanting a way of attaching a sight of any kind I designed this adapter that only needs 2 slightly larger M3x10mm screws…
ShortShell adapter for Mossberg 500 Still works with shells u to 3", but helps load the 1.75" shells. However i only tested it with 1.75" dummy shells on January 2025 I could test the Adapter during live fire training and had some hiccups…
This replaces the wood dowel that rattles around in Mossberg 500 Maverick 88 can be printed in pla or tpu honestly any material should be fine. This takes you from 5 round in the magazine down to 2 to make it legal for hunting.
Tool for installing/removing forend nut on a Mossberg 500 shotgun. There's a hole in it you can put a screwdriver in to help you turn. I didn't realize I would need one to put on a new forend grip, so I threw this together. It's 3AM. It's…
Used it for my caravan weinsberg caracito 2021 to add an additional curtain printed with PETG 15% infill, 3 walls, lying position without support like its in the STL. You can print it always without support, event if you rotate it 90…
Hängedeko für den Eingangsbereich zu Weihnachten
This mount is designed to attach to an Pipersberg BK-G4 and holds an Xiaomi "MiJia door & window contact sensor" (maybe compatible with similar zigbee/z-wave sensors) for messuring the gas "steps" via the reed contact. Print settings no…
Mounts for components commonly used in Meshtastic outdoor installations utilizing a weatherproof box. These mounts are for: RAK19007 WisBlock Board Raspberry Pi 4 Heltec v3 coming soon. They are meant to be used with a box which uses a…
I wanted a way to attach my Pi camera to the awesome case design that Malolo provided for the Pi4. I did some rough measuring of the printed case top, set up for a 30mm fan mounting pattern; did some modeling in F360, mashed some models…
Discover the Sber's Robot Green by Sber Robotics Center – a detailed 3D printable miniature of Sber's first anthropomorphic AI robot, presented at AI Journey 2025. This assembly model faithfully replicates its human-like structure with…
A Case for the Rasberry pi 3b+ with screws. It has air vents and a slot on the side to put in a note with e.g. the pins
This is a fully printable case for a Raspberry Pi Zero 2 & Camera Module v3 (Wide) that can be used as a face camera. The primary use case is a wireless HMC (Helmet Mounted Camera) for facial motion capture. For example the Brekel Body v3…
Hi, ich bin die Tage bei Amazon über diese 70mm Lampioneinsätze gestolpert:…
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
3D model of Mossberg (firearms company) emblem / logo. Two size versions of the emblem are available: 100 x 163 mm 120 x 196 mm The provided 3MF files contain all parts (STL objects) to be printed. For multi-color / multi-material…
Ein sauberes, minimalistisches Design für modernes Wohnen: Die einfache weiße Ablage ist Teil einer neuen Serie von Eingangsbereich-Organizern , die entwickelt wurden, um Eleganz und Ordnung in Ihre alltäglichen Räume zu bringen. Ihre…
Um meine Gaszähler zu "ver-smarten", habe ich einen Sensor Halter benötigt, welcher mit Magneten am Zähler befestigt wird. Mit den Magneten lässt sich der Sensor fein justieren und hält dennoch sehr gut. Ich habe 8x (10x2mm) Magnete…
Made for a specific old wood Mossberg 500, may not fit everything! Much softer than than the rock hard original, but not gummy worm soft. Printed out of Siraya Tech 85A TPU, 2 walls, 10% gyroid infill. 10 top layers at 0.1mm layers, 15…
A simple mount for Rasberry Pi Zero.
Working on a version that has mounts for a BTT can bus interface A remix of a remix! Added mounts for 2 lm2596 buck converters, use a 90 degree usb c adapter to power your pi . Follow the print instructions from the original creator…
I built a very slow movie player and I built my own snap-fit case. It features a perfectly-sized window for the display, with slide in holding mechanism for it, a 10 degree tilt up, pegs to fit a raspberry pi 4, and a cutout for power.…
created this for mounting a raberry pi 3B+ in a rack and have some kind of heat sink attached to it. You may have to redesign the bracket. The holes were design for 3mm screws heated inserts (you may also use a nut instead).
Wall mount for 20 gauge Mossberg 500 shotgun. The mount extends into the mag well and then locks onto a lip on the trigger side of the mag well to secure it in place. Provides enough clearance from the wall to also install a trigger lock…
Nyckel till Gustavsberg vattenutkastare Sweden ver2.0
Inspired by the Voron 2.4 enclosure I made my own for the Prusa i3 MK3S+. Exterior Dimensions are 614 x 556 x 518mm . The Case is sealed from all sides but air can still flow in from below to vent the electronics. The whole enclosure sits…
Wall mount for Mossberg 590S models with a factory installed short shell bumper. Added hole at bottom of mount body to facilitate a way to attach a trigger guard. Trigger guard releases when 590S is pulled from mount. I went for large…
The model is stil in progres! Feel free to test and mention what else should be added in order to become a perfect case!
I couldn't find an Osu keypad using the Rasberry Pi Pico so I designed my own using mechanical switches To build this you will need 2x Cherry Mx or equivalent switches, 2x 1N4007 diodes, 4x M3x12 screws, a Rasberry Pi Pico and some thin…
Bast on Sinns his Case that I like, But Becouse Im on a top floor where is very hot i need a case for good cooling for my raspberry p4 And also I want my hyperpixel 4.0 in it with a Dual Cooling Fans so i had to change some add a few to…
Ich habe die Höhe des Halters modifiziert, sodass er die Getränke auch in Kurven sicherer hält. :) Original Beschreibung: Ein Getränkehalter für alle Astra G Cabrio Liebhaber. Der Halter besteht aus 2 Teilen die leicht ohne Supports…
Ersatzklipps für den Schaltschrank von Spelsberg els ek 012. Dieser Klip wurde vergrößert und ist somit passgenauer.
Verleihen Sie Ihrem Eingangsbereich mit diesem realistischen Pommes-Frites-Tablett , modelliert nach der klassischen Kartoffelchipschale mit gewelltem Rand, wie man sie in Snackbars in ganz Europa findet, einen verspielten Touch. Ob als…
Hier: Weinsberg Pepper. Im Wohnmobil ist der Platz knapp und was nicht festgemacht ist fliegt rum. Zusätzlich zur Markisenkurbel haben wir noch die Thule Fahrrad-Lift Kurbel. Deshalb: Doppel-Kurbelhalter für den schmalen Bereich in der…
Bracket para añadir un ventilador 3030 de refrigeracion a la raspberry pi zero o zero 2, esta conectado directamente a la placa y controlado por klipper. Bracket to add a 3030 cooling fan to the raspberry pi zero or zero 2, it is directly…
You can buy the Rasberry Pi Zero 2 here This is an on going project of the new raspberry pi zero. All dimensions are accurate to the CAD drawings provided. I have modelled a variety of the SMD components or readjusted from existing other…
Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…
I don't know how or when it happened. Broken plastic lock wire retainer on service door. The gap between the door and the wall is large enough. I glued the printed part with SIKA glue. Screws were used while the glue was hardening. Then I…
is that da freddy fasber octopus
Modified case top for use with Armor Lite V5 cooler for Rasberry Pi 5. May want to double check the hole diameter, i had to shrink it down pretty small to fit my magnets. hex grid isnt centered on the fan, OCD beware.
Shell catcher for your Mossberg 930. Extensive adjustments to the original to ensure a rock solid fit while adding strength. Added larger diameter hole for custom release buttons up to 19mm. OR3Gun Release button in pic. Tested in PLA and…
This is a Raspberry Pi 5 Model B case that I designed. It has the ability for an RGB LED to be istalled on the top right or left. On the Back of the case you can unscrew the back panel to reveal some passages for the wires needed to hook…
I made this for a project, and I'm really happy with how it turned out. I am not an experienced CAD designer, but I thought that someone might like this design as much as I do! It uses an 80mm radiator and fan, with a cheap water cooling…
Rasberry Pi 5 - Case 15% infill No supports
The safety button on my old Mossberg 500 broke in half. I downloaded the only available button file that I could find, but the screw head sticks up to where it is uncomfortable to operate and the button is lower than I would like.…
Siehe Original - Bauteil dient als Adapterplatte für Wigo Dachmarkisen für den Fall das durch Gefälle die linke äußere Dachstange im Bereich der Seitenmarkierungsleuchte positioniert werden muss. Beim Druck hab ich mich an die…
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
This is a safety chamber flag for Mossberg 930 semiauto shotgun. It's used on matches or ranges to indicate that the chamber is empty and therefore the gun is "safe to handle". It's designed to be durable and easy to print. Print Settings…
Inspiriert von der ikonischen Pommes-Schale aus der Snackbar, aber neu interpretiert in einem schlanken, modernen Stil , vereint diese schwarze skulpturale Schale spielerisches Design mit minimalistischer Eleganz. Mit ihren leicht…
Original version: https://www.thingiverse.com/thing:5232416 Adapted to fit Q3 RTK HYX Composite Ringkolbenzähler from the company Pipersberg used by the water provider MAINOVA in Germany. Be aware that the ring holding the lid ist…
Printed in PETG with four walls for strength at 50% infill.
Organizer beim Waschbecken im Wohnwagen. Wir haben einen Weinsberg CaraOne QDK480 Bj. 2020
Just a simple flashlight mount for a Mossberg .22LR semi-auto rifle. It's designed for a Lumintop Tool AA flashlight but will work for any flashlight with a 19.1mm diameter. Instructions: Print vertically with a 5mm brim. I recommend PETG…
Camera mount for Prusa i3 and standard rasberi PI camera module. Function: camera holder place under the screw Heat Bad (print only one) can move camera left/right can move camera front/back can rotate with camera without screw all things…
Extender part with raspberry pi zero mount.
For ease of printing I cut the file in half and manually added a block for supporting the thin overhang. I still used slicer supports as well. To assemble the two halves x5 3Mx25mm bolts. I used hetset inserts for bolts but normal m3…
A small, stylish 3D-printed case with excellent airflow and space for a 50 mm fan. Perfect for keeping your Raspberry Pi
It's a mount to allow you to mount your raspberry pi pico to standard v-slot aluminum extrusion profiles, like 2020 extrusions..
Festive model of the seven bridges of Königsberg (a problem about graph theory)
Mossberg MC2C/MC2SC 9mm, Pistol Magazine Speed Loader
Entrümpeln Sie Ihre täglichen Utensilien mit Keanu , einem modernen und minimalistischen Eingangsbereich-Organizer , der für durchdachte Aufbewahrung und klare Ästhetik entworfen wurde. Ob Sonnenbrille, Schlüssel, AirPods oder Karten –…
Bring the timeless beauty of classical antiquity to your space with this stunning 3D printable statue that captures the grace and power of ancient Roman artistry. This meticulously detailed STL model showcases a perfectly proportioned…
a rasberry pi 3b pc with a huge 80x80x20 fan . this is for a rasberry pi b,a b+ might not work. remixes allowed.
The 3 is becouse it is the 3 version of the model, it is ment for a rasbery pi 4 with a fan cooling stack. modeld like a desktop pc, rgb recomended, if you like it please leave a like.
Remix of the Seven Bridges of Konigsberg https://www.printables.com/model/348126-seven-bridges-of-konigsberg
Print it with the screw holes on the build plate, no supports required. I used ABS, but inside a house any filament should be fine.
Printed with support. 100% infill. 1 ½ hours. have fun printing! :)
eine kleines update für die brixton felsberg 125 damit kann man den sitz erhöhen vone so das man nicht mehr so nach vorne gedrückt wird die puffer solte man in TPU drucken und vorne der glotz aus TPU oder besser petg so sitzt mann gerade…
An active cooling case for the Raspberry Pi 4. Along with Thermal & Flow Simulation (dm for simulation files) Aesthetically designed.
Scanned fresh raspberry. I scaled high in "Z" to 75mm. Scanner-> EinScan SE
My version of Raspberry Pi 3 B Cooler 30mmx30mm Holder
This is a snap-fit case for the Rasberry Pi 4 b with mounting holes.
rasberry pi 3b cover for ender 3 v2 printer
Hey everyone, I wanted to share with you a basic and simple design for a Raspberry screen that I found on Amazon. You can find it at https://www.amazon.co.uk/gp/product/B07QK. This design relies on a push-fit mechanism, which means it…
I really liked NAS solution from Jeff Geerling , but wanted to push it little bit more: add 5th disk. That's why I designed this bracket which replaces original bracket from Penta SATA HAT. This bracket will allow you to mount 5th disk…
its a case for a raspberry pi zero of 2w version
Replacement for the OEM grey plastic connecting nipple that sits between a Villeroy & Boch (or Gustavsberg) thermostatic shower bar valve body and the shower hose. The original part is a small grey plastic piece that can crack. The…
Use with a 3/8" socket wrench. Designed using a 500 model but it might work with others. Print with extra walls plus extra top and bottom layers for strength.
