5,687 models
UPDATED: see the new and improved print here: https://www.prusaprinters.org/prints/103948-sliding-number-puzzles-print-in-place-15-puzzle These are my 3d printed version of the classic sliding 15 puzzle. I've also included a 3x3 8 piece…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Easy To Handle Slide Lock Scalable in slicer
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Not sure if strikes the right tone, but for sure it is loud. This 3D Printed slide whistle will bring some fun. A quick two hour print (it don't needs support but some sanding may be required Inspired by the this Prusa Blog Print a…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
A Small Print in Place Slider Fidget, which takes only 13 Minutes to print. If it doesent work right off the Plate, put some force into sliding it and it should come loose. No AI was used in the making of this model.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Hier habe ich 2 Varianten für Plastik-Spiralreißverschlüsse konstruiert; zum Einen die Variante PC5 für 6mm sowie die Variante PC7 für 7mm breite Reißverschlüsse. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Push the top of the box and the inside hidden box will instantly appear under the first one ! The inside lid makes sure that nothing will escape the box and the gliding system and the locks are strong and fun to play with. Inside…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
A slide-to-drop scoop designed for easy and mess-free transfer of powders into bottles, shakers, thermoses, or containers. The scoop features a sliding bottom: simply collect the powder, place the scoop onto the bottle opening, and slide…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
A smart no-spill powder scoop designed for protein shakes, joint supplements, fizzy powders, or anything you mix in a glass or shaker. 🔄 The sliding bottom lets you drop the entire dose straight into the container 🥤 No more powder spilled…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
My contest entry for music instruments. Fully printable, No other hardware or gimmicks. With practice you can master the Lotus and play music. Without the Slide you can have a two tone “coo-coo clock“ bird sound by opening and covering…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
Opel Corsa D - Lüftungsdüse Schieber Adapter - Air Vent Slider Adapter - Fan Grill Slider Adapter
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Minimalistic design suitable for precision workshop projects.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Sliding Door Lock Mechanism This is a simple 3D printable locking mechanism that I used for my printer enclosure. It consists of 4 3D printable parts. It is advised to glue the slider handle to the slider to prevent it from coming loose…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Slide-On Notebook Webcam Cover - in various dimensions Measure the width and height and download the best fitting model. If you need other dimensions feel free to leave a comment. 07-07-2022 Added V2: thinner walls and smaller dimensions
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
Just download PrusaSlicer 2.6 , then open the 3MF file. You will be able to click on and change the text. The tag slides together and stays shut with a string or tie. This is to keep people from seeing your info unless it's important.…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Printed in 2 parts Left and Right Left piece has to printed with supports ,for the screw holes (I used prusa default supports which worked just fine) The model doesnt have any particular design on it so let me know if you would be…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Optimised version of the Slider Lock Latch by @MichaelQ - at least for me. The original version did not print well for me, probably cause I am using a slightly bigger nozzle, probably cause of other reasons. Anyways I also wanted to get…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…
Print approx. €5.33–€6.51 excl. taxPreliminary estimate for one variant
This is a remix of With_Maltodextrin's remix of Gabe's camera mount. I added the slide-in connector for the Wyze cam I developed for my other printers (eg…
Print approx. €7.52–€9.19 excl. taxPreliminary estimate for PETGSource material: PET
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
This desiccant box uses the lid of the IKEA 365+ 10.8l. I wanted to be able to remove the desiccant more easily than other solutions and came up with attaching the desiccant container to the lid. It is assembled with doulbe sided acyrlic…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
Print settings 0.6mm nozzle 0.32mm layer height 20% infill (but it probably doesn't matter too much) A test model is included so you can test that your hardware fits and that your printer settings are working, but this worked fine on my…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
This fits my Delta 36-670 table saw and will work great for crosscut sleds or one off sleds. I printed it diagonally to fit on my large printer. I have included the gcode for the Elegoo Neptune 4 Plus.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Improved cashplate for the LOCKCARD Wallet. Between the original sliders S and M in Size. With additional dividers to keep your coins from moving, while still having enough space for your banknotes.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Honeycomb Storage Wall - Combination Square Holder - Lufkin ProSlide
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Scout neckerchief slide for Troop 300. Designed for multi-material printing. Print instructions Designed with a flat front to the tube and 5mm pegs this design should hold up well to more fidgety scouts!
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Designed a dual holder system to secure the side storage in place without magnets and lock the door with a latch as it keeps opening from vibrations. Requires machine screws (4x 5mmx2.5mm) or 4x M3x10mm allen bolts to mount. Remove 4…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Shawn Gano's…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
A nice Cylindrical Slide Rule in base 10 that you can easily extend! You can easily multiply or divide numbers (and simplify fractions!) using the logarithmic scales. Print as many copies as you need and stack them to chain operations!
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
This curtain slider enables you to use IKEA curtains with typical, cheap, off the shelf curtain rails. Features Smooth sliding Durable Easy to print Easy to install Print instructions 0.20mm layer height 2 Perimeters NO SUPPORTS NEEDED! :)
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
cool hi CAPA slide, I think this works but idk, test it out for yourself!!!
Print approx. €2,590.60–€3,166.28 excl. taxPreliminary estimate for one variant
You need a square nut M3 and an Allen screw M3x6mm
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
Very simple hand tool to help with popping out sliders from a Topre keyboard. This is a bit more ergonomic than other options and, when printed in plastic, should be less likely to scuff your housings. The handle goes in your palm, the…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
A box for the RAL K7 colour fan, but with slide-lid (also little higher)
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Suggested print settings: No supports are needed but follow the suggested print orientation for ideal results. Buy me a coffee? If you like my work, show me a little support by buy me a coffee . Appreciated!
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Een gewoon schuifslot, ik heb er ook versie bij gedaan dat je kan sluiten met een veiligheidsspeld. De veiligheidspin kan je kopen in de ijzerwinkel. Ik heb ze niet afgedrukt. An ordinary slide lock, I also added a version that you can…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
A fun print-in-place puzzle involving sliding pieces around to complete the Benchy. The image extends to the frame to give you some hints along the way. Think you solve this brain-teaser? Print your Benchy Sliding Puzzle today to find out!
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
This is a support to allow microscope slides to dry. Gaps are 1.5mm wide. Fits 20 slides. Simple print, no supports.
Print approx. €2.79–€3.40 excl. taxPreliminary estimate for one variant
Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
This is the “Rugged Box v3 60” for 35mm Slide Filament Samples (and also fitting my remixed 35mm Slide Infill Samples ) cut down to fit the bed of a Prusa Mini/+ or other smaller printer. There is also the option of a windowed top, so you…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Tired of people walking in on important meetings? This is a simple, two-part sliding sign that clearly indicates whether a room is available or in use. Just slide the cover to reveal "YES" (in green) or "NO" (in red). The best part? This…
Print approx. €5.19–€6.35 excl. taxPreliminary estimate for one variant
This is for s 2022-2026 RAM Promaster. It slides over the cell phone holder. It works with vans with/without wireless chargers. Will Phelps at Alien Enterprises talked to me about reducing the cup holder print time and told me about his…
Print approx. €11.67–€14.27 excl. taxPreliminary estimate for PETGSource material: PET
Now with sliding attachable sides! Now with Extension plates. New Coordinate frame plate I made this modular plate so it is possible to snap plates together with the peg-in-hole snap method. They can be used to quickly make todo list on a…
Print approx. €5.12–€6.26 excl. taxPreliminary estimate for one variant
Inspired from https://www.prusaprinters.org/prints/73962-lathe-cross-slide-t-slot-covers I made my own for my HBM 250X550 Profi Norton Lathe. - Good idea to keep cleaning work easy:-) The short ones have a different shape, because they…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
vodící lišta která se šroubuje do podlahy pod dveře
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Kapla-sized planks with a carefully placed hole, to create a slide-together structure. I provide a customizable OpenScad script, so anyone can change the size of the pieces (I provide an example that is fully compatible with Kapla…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Just a simple slide-on lid for the Spam Yahtzee game, since ours didn't seem to come with one. The inner dimensions slide on perfectly, but I could have made the box a bit longer to extend an even dimension across the top. Maybe in the…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover. To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight. The flashlight is…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement slide lock for use with Fiskars Softouch Micro-Tip Pruning Snips for use when the original gets brittle with age and breaks I used PETG which seems to work just fine, but other stiff materials may also be acceptable
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
No supports needed. Screw holes must be manually enlarged on one side of the long piece, to absorb the screw heads.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
This is an upgrade of Hettich like sliding door wheel by using 608ZZ ball bearing. I've designed this around things I had available. Besides 608ZZ ball bearing, you will need M3 bolt, nut and washer to hold the bearing in place.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
This month's obscure part is a drawer track rear support bracket for "King Slide" brand drawer hardware.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
Fills holes not used to stack. Also fills sides based on closing out the bottom of a stack.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the excellent headphone holder from @LayerCake for sliding onto a 5 mm wide panel. --- German description --- Das ist ein Remix des exzellenten Kopfhörerhalters von @LayerCake zum Aufschieben auf 5 mm breite Panele.
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for PETGSource material: PET
T-Slot covers for the crossslide of my Emco Maximat Super11 lathe. Crossection od profiles measures 11 x 13 mm and have various length. This set fits for my position of the compound rest. Length changes when you change position of the…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
A small slide-on shelf for a Simon 10 series power outlet or light switch. Can be used for charging smart watches of phones. Fusion 360 source file attached, so you can tweak it to your needs Print instructions Works fine with PLA, 0.2mm,…
Print approx. €6.00–€7.34 excl. taxPreliminary estimate for one variant
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Motivation The F2 Ultra class of xTool machines has a grid for attaching any number of jigs. From what I have seen, the default approach to designing most jigs is to rigidly bridge the workpiece contact points to the closest grid…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET
Features: for PLA adjusted height 1 to 1 replicant doesnt work for PLA → breaks on mounting no support needed but brim very helpful Disclaimer! Clean Printplate needed for supportless print. Speaking from experience :( I'm not sure if PLA…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Aesthetic front wheel slider KTM 1290 SDR. Can be used with 2 m6x60 bolts and washers, or a m10 rod with washers and nuts. (See drawing) Print the Slider cap 2 times and use a color change if you like. Be aware that it's designed to look…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
I designed this door handle to get an handle from the outdoor.
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
PLA 0,2 mm no support
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I designed these inlets to fit glass slides into standard pipette tip boxes, perfect for wet chambers or storage. Compatible with: TipOne brand boxes Slide size: 22 × 50 mm These inlets keep your slides secure, greatly reducing the risk…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
I needed to push the drawer as far back as possible. As the metal contact surface would eventually damage the car's plastic, I made this foot that slightly lifts the drawer and moves and extends the contact surface back into the car's…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
Goes on toothpaste tube togrt all of the toothpaste up to the top. Inside dimensions: 60mm X 1mm X 10mm
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
This is an add on slide-in/out stage for the Universal Microscope Stage (USM) that includes a hole for light and three smaller holes for the attachment of a stage caliper. LED light “HeHe” Traffic safety Walking LED (Amazon) ""Pomya"…
Print approx. €6.96–€8.50 excl. taxPreliminary estimate for one variant
salt shaker lid with 4 positions slide - couvercle à glissière à 4 positions pour une salière
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
sliding shutter
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Ikea Mulig drying rack lift anti-slide lock. I experienced this when I lifted the rack around. This lock keeps the rack locked when it is lifted, preventing the drying rack from sliding and wrinkling the clothes.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Design This is yet another box with a sliding lid. The main distinguishing feature is the lid snap locking when closed. I have included 2 sizes that I made for my wife's knitting/crocheting items. Printing Printing is simple and standard…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
I printed this laying on its side with Creality PETG on a Ender 3 v3 SE. Made in Tinkercad.
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
Recommended print settings: Material: PLA/PETG Layer Height: 0.20 mm or less Infill % : 25+ Supports: No Print Orientation: Default as modeled Brim: Optional Background: Many sliding barn door kits come with “anti-jump discs” as pictured…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Helper element for preventing a gate to prevent babies and toddlers to enter/ leave a room or fall down stairs from sliding of the door frame. My door frame is ~75-78 mm wide, the whole has a diameter of 35.5 mm. All dimensions can be…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
I have several sliding doors in the house. The one metal handle is still OK but all the plastic ones are broken. I made these out of PETG but PLA might be OK also. It was a popular pocket or sliding door style in the 80's.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a neckerchief slide to use when volunteering with my son's troop. My old one is lost somewhere and I'm a game nerd. A medallion translates perfectly to a neckerchief slide. And Geralt's design from the series is the best! There…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
VW Sharan I front seats railing replacement spacers / sliders. Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
🇮🇹 L'Organizer che si adatta a te, non il contrario! ✍ Ho progettato questo organizer modulare partendo da un problema comune: la maggior parte degli accessori da scrivania è pensata per destrimani. Ho voluto creare qualcosa di veramente…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Hi! Because I had a 3 broken sliders, and the desk was unstable I decided to repair it my favorite way... let's 3Dp it! NO SUPPORTS NEEDED
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Sliding Pen Organizer Box A minimalist desk organizer featuring a smooth sliding mechanism to store and access your pens and everything you need. The sliding drawer reveals your pens in a clean and satisfying way, perfect for organizing…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This is replacement for latch mechanism of the FHC C1123 Sliding Door Handle Set. (spring, and rail guide not included). The original die cast version had a weak point in the center of the finger grove that snapped. While it's probably…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
The final word in squad organization and identification. Description Included: A 1-color variant dial cover A 2-color variant dial cover 2 target lock tokens (open) 2 target lock tokens (filled) 1 small base ship identification ring with…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…
![Benchy Sliding Puzzle [Print-in-Place]](https://media.printables.com/media/prints/1217017/images/9139164_5b5cf460-c351-4b46-9fe8-18393da92d39_fafc3ee8-131f-4faf-81d9-2e502fb56388/benchypuzzle.png)
