Counting matching models…
Designed a cover for Epos Sennheiser GSX1000/1200 External USB Soundcard. The design is for GSX1000 but it should fit GSX1200 without problem. Printing: Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for PETGSource material: PET
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…
What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures…
A component that can be placed between the two circuit boards to secure the antenna connector. I've had the connector come loose before - but with this antenna clamp, the connector is now secure and can no longer come loose accidentally.…
This is a high-performance LoRa module specifically designed for the XIAO series development boards. Based on the Semtech SX1262 chip, it supports global LoRa bands (862-930MHz). Combined with the powerful computing capabilities of the…
Recently I found the Xiao ESP32S3 with Wio-SX1262 LoRa hat as a good and cheap Meshtastic node for installtion at home. For some time it was just sitting in a breadboard which, the USB cable dangling between some flowsers… you know, it…
Description While I wasn't looking to make the most unreasonably small Meshtastic node when I originally bought my XIAO ESP32S3 & Wio-SX1262 from Seeed Studio ; however, it has become quite a Quixotic quest to come up with one…
What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…
This remix scales the skadis board to utilize the entire build plate of the Bambu Lab H2D (with a single print head). 14 rows by 15 columns of holes for a 320x300mm skadis board.
A base mount to design a case around for the XIAO nRF52840 & Wio-SX1262 kit. No screws or glue needed, the kit just clips in place. Enjoy!
I wanted a case that used standard 18650 batteries for my Xiao NRF kits that also had a power switch. You'll need some switches like these (2MM): https://www.aliexpress.com/item/1005005531658132.html Battery terminals like these:…
A minimal snap-fit case designed for the Raspberry Pi Pico and Waveshare SX1262 LoRa Node HAT. Features Opening for female SMA connector Opening for micro USB cable Internal standoffs to hold the Pico in place Trough for the HAT’s headers…
This Slim case for a (directly soldered) XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo. To increase the visibility of the status LED, stick a short piece of transparent filament in the bigger of the two holes and trim it flush.…
A minimalist case for the XIAO nRF52840 & Wio-SX1262 kit. It is designed to be small and portable using the internal antenna. It is designed for a 650mAh 18350 battery, which is enough to power this hardware for several days using…
Poop chute for Bambu Lab P1PP1SX1
🇩🇪 Beschreibung (Deutsch) Ich habe ein Gehäuse für den Wireless Tracker (ESP32S3 + SX1262 + GPS, kompatibel mit Meshtastic und LoRaWAN) entworfen. Das Board verfügt bereits über ein integriertes GPS-Modul, es muss also kein zusätzliches…
Helloo! Here’s my second case for Meshtastic ! This time it’s designed for the ESP32 with the SX1262 from Seeed XIAO , using soldered pins. To reset the device, just insert a Bic ink tube through the hole to press the reset button. Extras…
Casing for Raspberry Pi Zero + Waveshare SX126X LoRa HAT + OLED 1.3 - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
Honda Grom washers, modeled after the factory washers. I printed from ASA, face down, so I get the texture from my textured PEI plate on the face. Blender file included. Category: Automotive
This is a remix of the Seeed XIAO ESP32S3 & Wio-SX1262 to mount the antenna vertically. No supports needed I added a light pipe and wall mount.
The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.
I make a few tweaks to this great case to fit my requirements. Additional parts required: 500mAh battery approx 39x17x9mm Slide switch 19.5x6mm 4x 2mm hex head bolts and heat inserts (I just pushed them it) Belt clip 2.5mm hex head bolts…
I'm using the Seeed Studio XIAO ESP32S3 & Wio-SX1262 Kit for Meshtastic & LoRa as a leaf node (a node at the end of the mesh’s branches) for integration with services like Meshmonitor and Home Assistant. It's a great, minimal node when…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 After finding the original model incomplete, coloured wrong and with an extra unrelated part included I decided to fix this for myself and others, as it seems to be the same broken KiCad export in all the places the original…
Compact case for a Xiao NRF52840 + Wio SX1262 with a 2000mAh 103450 cell. There are 4 mounting options: Without switch: 1 - XiaoNRF with the original adhesive antenna. 2 - XiaoNRF with Ipex-SMA pigtail. With switch: 3 - XiaoNRF with the…
Case for a LoRaWAN gateway based on Raspberry Pi 2B and Waveshare SX130X (that is SX1302 and SX1303 at time of writing) HAT. Print as is, no support necessary. There are 4 different variants of the top: with a cutout for the Raspberry Pi…
You need to use support. I printed a piece with a clip on the side .
You will need: 4 M3*8 screws. An IPX/UFL to SMA connector. A 0,96 inch OLED display. The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set. 4 wires and a soldering iron for connecting the display. Connect the…
This model has some space removed internally on both the case and back cap in order to fit desired components such as a tactile button, .96 OLED Screen, and a INA219 voltage meter. The meter allows the user to view voltage state on-board…
Mesh node using a ASTM F2158 PVC vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit. Parts needed: -ASTM F2158 2'' PVC tube cut to 130mm + the length of your antenna -ASTM F2158 2'' PVC tube cap -6x M3 x 12mm bolts (Stainless) -2x M3 x 8mm…
Casing for Raspberry Pi Zero (with dongle) + Waveshare SX126X LoRa HAT + OLED 1.3 - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
Enclosure for XIAO nRF52840 & Wio-SX1262 with 18650 Battery Holder and TP4056 USB-C Charger This enclosure is designed specifically for the Seeed Studio XIAO nRF52840 combined with the WioSX1262 LoRa module , providing a compact and…
I really enjoy this enclosure as it is tough, light, and adaptable. I would also like to test other radios, since the case leaves some room for exploring. I used double sided tape or hot glue to keep the chips in place. EDIT: After…
XIAO nRF52840 & Wio SX1262 Kit with mounted antenna, 18650 battery, and a battery charger. The nRF chip is pretty jammed in there, it's a bit finicky but gets the job done. Might update the model to have stress relief lines in the lid for…
The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…
You will need: 1x M6 54mm to go through the entire bolt 2x M3 22mm to replace the trigger guard screws 4x M3 20mm to assemble the lever parts together The bushings are used to space the lever arms away from the gun so they do not catch on…
Casing for Raspberry Pi Zero (with and without dongle) + Waveshare SX126X LoRa HAT - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
The TP-Link TL-SX105 10GBE switches are prone to getting very hot when under load. I designed this bracket to hold an 80mm fan on the top surface for cooling. The bracket snaps onto the venting holes on the side, occupying 3 on each side…
A case for the Seeed Xiao nRF52840 + Wio sx1262 fitting two 2000mah batteries in parallel. Battery: 2x 2000mAh, LiPo, 10mm x 34mm x 50mm Printed in PLA 30 days on battery
Caliper based 3D model of the XIAO nRF52840 & Wio-SX1262 Kit for reference.
Vertical and Horizontal Antenna Case for Seeed XIAO nRF52840 & Wio-SX1262 No supports needed
reshaped hole to allow slide switch
22+ Honda Grom/MSX125 Fairing bracket for aftermarket intake/airbox delete WARNING! If you must cut your carbon fiber tube, do so in a safe environment. Carbon fiber dust is dangerous. I use a large tub full of a water, and a bandsaw,…
My design for the XIAO ESP32S3 & Wio-SX1262 Kit .. You can find many alternatives, and this is one of them, nothing special. It might meet someone’s needs. The product I received came with the pins pre-soldered, and since I didn’t know…
Factory original nozzle, printed in white filament in my photos. The one I designed and printed is red. I printed it on the SX1!
This is a reference model to assist in creating cases and other related objects to the XIAO ESP32-S3 and Wio-SX1262 module, not for 3D Printing itself (although....). It should be within ~0.2mm of the actual products, and I hope this…
I printed the parts in PETG. There are a few springs that would break if you use PLA. You can choose whatever color you want for the case and cover, but for the little window you'll want a transparent material. You can read the full…
2 варианта исполнения: просто кейс кейс с выемкой под переключатель Пример переключателя https://www.ozon.ru/product/dvizhkovyy-vyklyuchatel-mini-pereklyuchatel-pitaniya-dlya-arduino-maketnyh-plat-diy-i-elektroniki-1323063165/
Tube Case Remix: XIAO ESP32 + SX1262, TP4056 fast charge (Meshtastic/MeshCore)
Made upon a request for 606090 Lipo battery support. Never printed, use with caution.
Adaptada la carcasa para un NRF52840 y un SX1262 Tambien he agrandado el hueco de la bateria, ahora tenemos un hueco de 41mm x 25mm aprox., yo le he puesto una bateria de 1350 mAh y un bms y cabe perfecta. Dejad en comentarios si teneis…
This is my very rough approximation of the cisco BRKT-SX10-WMK. I added additional screw holes so that you have options. It isn't pretty but it's held an SX10 for 4 years now so it works and is hidden behind the camera anyway.
remix Body for for use Tube Case for Seeed Studio XIAO with esp32 & Wio-SX1262
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
Case for SX1262 LoRa HAT Module. Consists of Base and Top.
A re-designed variant of the keyfob case with room for a larger 350mAh battery like those found in discarded vapes.
A tool organizer for the LMS4700 HiTorque Micro Mill and other Sieg SX1P Mills. Holds the two included wrenches, the drawbar key, a drill chuck key, and the spindle wrench. Requires a 4 mm pin for the spindle wrench holder. It is attached…
The revision I made: A bit bigger case Up to 2500 mAh 104050 battery 3 button at the front More ventilation holes Additional charging module holder (TP4057, IP2312) For Xiao board fixation now use screws Room for a thin circular plate…
XIAO ESP32S3 & Wio-SX1262 Room Case. Built to be used with Stock antennas. Not built for outdoor use. Built to be a MeshCore room server enclosure and should be near an external repeater because the stock antennas are crap. CAD document…
Features: Designed and tested specifically for XIAO ESP32S3 & Wio-SX1262 Kit boards. Compact size with ventilation holes and room for antenna cables. Outputs for two SMA to I-PEX cables for WIFI and Lora antennas. USB type C power input.…
This little enclosure fits the SX1308 Boost Converter available on AliExpress, letting you run it inline, and giving it some protection. It might be a tight fit, depending on the individual regulator. If you have troubles, let me know,…
make your printer look very good
A slotted carrier for sx1509 boards. They have up to 4 addresses that can be used on each i2c bus so this allows 64 channels. I potted the whole thing in hot glue to protect the wiring
The TP-Link TL-SX1008 is an excellent 10 GbE switch, but its stock cooling solution is extremely noisy for home or office environments. Even after replacing the original fan with a smaller 40 mm quiet fan, the noise reduction is still…
It can be really annoying when the sun is in front of you and low in the sky... those with red dot sights will recognize this problem. This sun shade attempts to resolve that problem. Printed in PETG for outdoor longevity and flexibility.…
motorcycle thermometer holder
I made this skid plate to attach to the SX19HF Ehplorer Drone. It uses a ziptie to connect firmly to the drone.
Replacement antenna for the TriSquare TSX100 radio. Printing instructions: Print the model upside down. Join the printed parts using epoxy adhesive after printing. This part is designed as a repair/replacement component for the original…
This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…
You will need: 4 M3*8 screws. An IPX/UFL to SMA connector. A 0,96 inch OLED display. The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set. 4 wires and a soldering iron for connecting the display. Connect the…
A minimalist case for the XIAO nRF52840 & Wio-SX1262 kit. It is designed to be small and portable using the internal antenna. It is designed for a 650mAh 18350 battery, which is enough to power this hardware for several days using…
The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.
Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…
Mesh node using a ASTM F2158 PVC vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit. Parts needed: -ASTM F2158 2'' PVC tube cut to 130mm + the length of your antenna -ASTM F2158 2'' PVC tube cap -6x M3 x 12mm bolts (Stainless) -2x M3 x 8mm…
The TP-Link TL-SX1008 is an excellent 10 GbE switch, but its stock cooling solution is extremely noisy for home or office environments. Even after replacing the original fan with a smaller 40 mm quiet fan, the noise reduction is still…
The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…
Case for SX1262 LoRa HAT Module. Consists of Base and Top.
This case has modular battery inserts to allow the use of 18350, 18650, and 21700 batteries. The USB port of the Xiao is accessible, and there are two frames. One with just a power switch to wire inline with the battery, and another which…
reshaped hole to allow slide switch
I printed the parts in PETG. There are a few springs that would break if you use PLA. You can choose whatever color you want for the case and cover, but for the little window you'll want a transparent material. You can read the full…
This is a remix of the Seeed XIAO ESP32S3 & Wio-SX1262 to mount the antenna vertically. No supports needed I added a light pipe and wall mount.
2 варианта исполнения: просто кейс кейс с выемкой под переключатель Пример переключателя https://www.ozon.ru/product/dvizhkovyy-vyklyuchatel-mini-pereklyuchatel-pitaniya-dlya-arduino-maketnyh-plat-diy-i-elektroniki-1323063165/
This tachometer cover fits perfectly onto the Aprilia SX125. It kann easily be put onto tachometer and ignition lock and prevents both from becomming wet in bad weather conditions and even heavy wind. Very helpful, easy to print and looks…
This is a set of FOUR holders to mount the ACERBIS RALLY BRUSH protectors to the bar of your Aprilia SX125. It also works in addition with the mounted Acerbis Rally Brush SPOILERS for even more protection against wind, rain and dust. Of…
Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
This case has modular battery inserts to allow the use of 18350, 18650, and 21700 batteries. The USB port of the Xiao is accessible, and there are two frames. One with just a power switch to wire inline with the battery, and another which…
TSX14 is A lightweight structural table system designed to minimize material while maintaining strength and stability. Built around a triangular geometry, the structure carries load through shape instead of mass, resulting in an…
A lightweight side table and plant stand designed around efficient geometry rather than material mass. Despite its low material usage, the structure remains rigid and scales well to your printer size. The entire model prints in a single…
