Counting matching models…
Este es un test de retracciones muy sencillo en el que se intentan probar distintas situaciones y distancias. Además, si el logo de Control3D no sale, puede ser indicativo de tener las retracciones altas Abriiiiiiiiiizos Te dejo por aquí…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
Easy to use Easy to print
>>> Updated to V2. more consistent channel clearance (see sketch image). 0.4 stamp is also moved to bottom now for consistency with other dimensional stamps. It's my take on tolerance test. It's a tolerance test with a taste of fidget…
After the first attempt I made this one louder and easyer to print.
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
From the well received GREATEST Towel Hook V2 now an Remixed Version that can be hang on a door without using tape or screw I really liked the original model but i didn't want to attach it with tape or screw, so i remixed it to be hang on…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.4 mm. The dial has a…
Some sample G-Codes to benchmark the extrusion system of selected printers. Find the full tool and a sample evaluation here: https://github.com/CNCKitchen/ExtrusionSystemBenchmark
Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and holes. Also…
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
These are some demo files to try out Arc Overhangs on your machine. USE AT YOUR OWN DISCRETION! This is EXPERIMENTAL! The start G-Code is very generic and should work on many machines, yet adjust if necessary. Play around with print speed…
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
From orginal author Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s. You must use the gcode file; the 3MF is the PrusaSlicer project. I'm uploading this gcode…
4 handle sizes, perfect for your DIY projects
Hard to print? Try this one This is another take on the idea of a quick-to-print phone stand to make lots of and put around the house. If you don't need your phone to be elevated and are looking for something that takes up less space,…
Also tested with other charging ports Inspired by the box openers
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks
In this final version, I’ve incorporated all the feedback and suggestions. The whistle is now even easier to print thanks to improvements in the internal structure. With thicker walls and an optimized design, it’s also louder than before.…
Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
This super simple ghosting test takes <1hr to print using the correct settings. The included .3mf file is set up with the optimal settings for a fast print. If you want to slice this yourself, set the external perimeter (or outer wall)…
Perfect nut gauge for your toolbox You can print this in one or two colors.
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Introduction This is a piece I made to test the Prusa MMU. It uses all 5 colors, and you can change the color to your liking in PrusaSlicer." Remember, you can change the color using shortcut keys 1 through 5, provided you've previously…
parts can be glued or screwed together, windows must be glued on to body, tires on the bed must glued to the body https://www.thingiverse.com/thing:4063298
Material black and white filament (PLA, PETG, …) USB-C or lighting cable concrete or plaster for base (optional) Printing side panels (white) Printing the side panels is quite tricky with a FDM printer because of all the wobble. I printed…
Couldn't find a 3D modeled set of Decora wall plates anywhere online, so I made some based on widely available dimensions. This print is a direct replacement for any Decora rocker, Decora outlet, or GFCI outlet cover (see dimensions pic).…
A one layer test to help make sure your Z-height is correct, use .2mm layers, select print and then use live adjust Z to tune in your Prusa to the perfect layer height. Your as it lays down the diagonal lines, the lines should be able to…
A new box opener concept WD40 can be used to make it spin better
Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…
Useful combination of a box and templates for your notes. The templates come in three versions: To-Do list, with a tick off field lines, for longer sentences blank, for you to add your logo The box keeps your desk clean and organized.…
My 5-year-old son decided to become a pirate, so the right accessories were needed. Assembly instruction: Put the hook into the cover, then put on the ring and press it against the cover from the inside. It is best to stick with glue.…
This is my make of a small model of the Tesla Cybertruck that I found at https://www.thingiverse.com/thing:3996654 . I created the .3mf files that are attached Print instructions I used rafts and supports and had a bit of an issue with…
This is a two color print. I do not have a multi color printer so I printed the logo first and then started a new print with the cover, with the logo still on the print bed. The logo is only 0.2mm thick, so this is no problem. Use a…
A simple test to se if your bed is level. Fast Print! Printing Settings: Resolution : 0.1 to 0.2 Support: NO Infill : 100% Raft: NO Material / Brand : PLA/Any Filament Designation : Any More designs Sports Whistle Star Earrings center…
I have designed this Core XY Cartesian Motion System in Fusion 360 and printed it using my PRUSA MK3S. I have also included for fun accessories such pen holder and miniature milling table. You will only need to get 3 length M3 SHCS, M3…
Update 09.01.2026: Modell von Übergroßen Brücken (30mm/40mm und 70mm) hinzugefügt Model of oversized bridges (30mm/40mm and 70mm) added…
Prints very easily in vase mode :) Any material you want Happy printing!
A Tesla CyberTruck body that bolts on to the OpenRC F1 car with no mods to the car chassis. Print instructions After my son printed a 200% version of the CyberTruck model from https://www.thingiverse.com/thing:4063298 , it suddenly…
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
This is the most important first print you need to print. It will allow you to Live adjust Z Hight. Very short print. In 5 minutes you will set the printer to print beautiful models. It is set to test PLA or PETG. If you use the stl,…
A satisfying print-in-place fidget working right off the print bed that you won't put down. Super fun, but small enough to put in your pocket. Originally I made not to be a torture test but after realizing how hard it is to print I made…
Bonjour a tous, voici un support en forme de dinosaure. Il marche pour les lunettes de soleils et celles de vues également, il est possible de faire un modèle pour enfant en adaptant l'échelle (80% ou moins) Bonne impression ! Support…
Test for VFA in all directions at speeds from 40mm/s to 190mm/s. At every notch (5mm apart) the print speed increases by 10mm/s. The gcode is a ready to go file for PLA for your MK4S; the 3MF is the PrusaSlicer project, not just the…
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
I really liked this design and found it to be closest to the OEM one that Tesla used to provide for free. However, I found the STL to have some odd artifacts and difficult to paint in PrusaSlicer for a combined PETG+TPU print on my XL.…
NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
If you’re tired of the eternal Benchy and want something different to display on your shelf, here’s a fresh alternative. It’s also a great way to test your printer’s capabilities, including overhangs, bridges, gaps, and stringing. If…
From 20 years of experience as a Sushi Chef, this is my personal, professional Makisu. Thinner and lighter than a bamboo maki mat for less fatigue 20cm width fits Nori Seaweed sheets perfectly. To be able to precisely form the edges of…
This model is the blandest design on Printables. However, it is useful to do a rapid test of the MMU2S multi-material unit. The model has 6 layers. 5 cylinders and the letter P. The first cylinder is 0.4 mm tall while the others and the…
I printed in ASA to be able to withstand the heat in my car. Edit 6/18/24: I added 2 files one for 162mm length phone w/ case and a Step file to be able to adjust the model to your liking. Just make sure the pegs that go into the vents…
Simple alignment test, single layer 0.20mm, 0.2mm extrusion width. 200x200 mm.
A quick and nice geometric shape for decoration or test prints. Ideally to be printed in vase mode (2 parts)
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
To easily transport your beer cans from the fridge to the garden or terrace. Two models of handles are provided for 330ml cans and 500ml cans. A very easy to remove support is required where the handle comes to rest. It is also advisable…
I wanted smaller more compact parallettes. I tried different designs and ended up with this, also with the idea in mind to customize the front sides as you want, to make them your own.…
If you plug your Tesla UMC into the wall inside your garage, but charge outside, this will protect your cable from the garage door closing on it and damaging it. If you have a Prusa MINI, I highly recommend using the Gcode and PETG for…
TLDR; Back again with another seasonal Stress Test for your printer – and this one’s eggstra special! Download Spring Chicken, share your print with us, and you could win one of the cracking prizes below: Most creative print: £100 E3D…
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks Now with a straw insert
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
The perfect hook for your DIY projects - quick an easy !!! You only need to screw a bolt of the corresponding size into the wall; with the keyhole hook, each component can be mounted quickly and easily.
Cache moyeu pour les jantes en aluminium. La face visible est lisse et on peut facilement coller un logo. Le diamètre extérieur est de 60 mm. Update 04.07.2024 Nouvelle version v4: Les crochets sont légèrement plus épais pour une…
Presliced gcodes included: MK3S - QUALITY/SPEED; 0,2 layer height MK3.5 - STRUCTURAL/SPEED; 0,2 layer height MK3.9 - STRUCTURAL/SPEED; 0,2 layer height MK3.9S - STRUCTURAL/SPEED; 0,2 layer height MK4 - STRUCTURAL/SPEED; 0,2 layer height…
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Very fun model of Orko from Masters of the Universe. Printed with the base, but didn't need it. Also printed with full organic supports. Came out quite nice. Now to paint…. Much thanks and all credit to ChelseaCreatesThings on Thangs.
Prusa Slicer Infill Pattern Tester A showcase of 12 different infill types: Honeycomb Line Triangles Stars Hilbert Curve 3D Honeycomb Adaptive Cubic Octagram Spiral Concentric Gyroid Rectilinear Grid Included files: Ready-made .3mf…
The Height Z Layer Shift Test is designed to verify that there are no layer shifts, ensuring stability and accuracy before attempting a model that utilizes the maximum Z height of the printer. Print settings Nozzle size 0.4 / 0.6 Layer…
Please click if you appreciate my work :) V12 power, 1980s soul, and unmatched style. This 3D printable wall-mounted model of the Ferrari Testarossa (512 TR) pays homage to the iconic supercar of the late '80s and early '90s. With its…
Update April 9, 2025 : STEP files added. While creating another print (see below) I got an idea for an improved snap-fit peg, and created this print to try it out. This snap fit incorporates what I believe are some improvements to typical…
Shout out to PALADINQP for this ridiculously cool model. → https://cults3d.com/en/users/Paladinqp/creations → https://cults3d.com/en/3d-model/home/pupa-solar-opposites-free-free-3d-print-model
BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
The model can test your stringing and oozing behavior quite efficient up to 5 colors. The 3mf file has already sliced the 5 colors for you. It's sliced in the Alpha 2.7 Slicer version with Inputshaper, be aware about that. It's at the…
This remix contains ONLY the overhang test shape to allow quick prints to determine the effect of changing slicer settings on overhang performance. The PrusaSlicer “Print Settings” → “Quality” → “Extra perimeters on overhangs” setting…
2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Distance plates for vesa 100 mount
Another quick test print to test retraction and get a calibration cube in 12 minutes on a Prusa. Measured from the base of the model, the cube is 10x10x10 mm with 1 mm thick walls.
Easy to print - Easy to handle Perfect for openeing your boxes
Test the max flow rate of your K1 / K1C / K1 Max hotend using the pre-sliced GCode. !!! IMPORTANT !!! Uncomment lines 41, 52, 451, and 458 (the ones following the comment (; *** Uncomment next line ***) using an editor like Notepad++. The…
Info: just a fun simple hexa tile, but with a road on it, which can be random even when this is only from a single tile contains also bridges Print info: 0.1mm layers for better road bridging
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
This is a cool model that I found on Sketchfab by RISD Nature Lab. This model is actually quite easy to print. There are just a few adjustments you need to make before printing. Add a raft at 2 or 3 layers for the best bed adhesion (or…
Ich habe verstärkt VFA auf der Y-Achse bemerkt. Also schnell einen Testkörper gezeichnet um Gewissheit zu haben. Die X-Achse ist deutlich unauffälliger, aber bei der Y-Achse fangen ab 70mm/s die “Wellen” an. Also wird bei mir in Zukunft…
I am investigating an issue with perfectly repeating VFAs (Vertical Fine Artifacts) on my Prusa XL. By the time, I found more and more examples on other user's Makes that show the same pattern. The problem is described here:…
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Use this to set up your bed leveling correct. On the photo you can see, in the front right corner it is too far away, and in the front left too near. Print this, adjust your bed screws and then print again. Category: 3D Printing Tests
Use this to test your bed leveling, this tells u if you have leveled your bed correctly so i remastered the original bed leveling model from my models, now everything fits better, and every piece is the same size and at the same lines and…
