135 models
More FDM optimized version of iLabs CLIPPY. CLIPPY seems to be a rather exact copy of the JAYO/SUNLU/(others?) filament clip supplied with 250g spool sets. This design is my absolute favorite after testing many. Big thanks to iLabs for…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole and imbedded magnets for light tools. The fit now is very tight. In addition to the original model where you could…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
This is a remixed version of the original Recycling Fabrik MultiSpool, utilizing my Prusa Spool core for Recycling Fabrik Refills. The side pieces are thicker and the refill is held much tighter by the spool than by the original…
Print approx. €3.73–€4.55 excl. taxPreliminary estimate for one variant
Thanks for the great design Alex!!! remix from: https://www.thingiverse.com/thing:4618679 I add some springs for tighter fit the euro plug I added V2 with larger springs for easier printing with petg or other materials. usage: Print…
modified the original files to fit tighter to the PS5, and increased the strength of the hooks. Also added a larger hook to the back side of the right side. Added a 3mf file where they both fit on the print bed together on the MK4 or MK3…
Dies ist ein Remix vom AMS Stack von LusBueb. Ich habe die Öffnungen verengt, somit wackeln die Steckverbindungen weniger. Ich habe auch die Abstände zur AMS verengt für eine stabilere Verbindung. Zusätzlich habe ich auf die die Lösung…
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…
Edit 22/oct-2023: If you have trouble with the rollers “growing” into the inner and outer rings, you need to lower the gap closing radius in the slicer. In OrcaSlicer, this is found under Quality > Precision Print in place 608 Roller…
This model has been recreated to allow for a tighter fit, eliminating the rattle and movement of the original. The surface features were also changed to be a bit more printer friendly at this scale. No special print speed considerations…
After encountering Y-Axis Slip due to the acceleration values I'm using, I noticed that the original tensioner doesn't allow much tension of the Y-Axis belt, I redesigned it such that it provides a little more tension adjustability. This…
This part is an upgrade to my popular miniature vice system, which can be used as stand-alone part (e.g. as third hand for soldering work) and with the also available table clamp. Please note that this upgrade was intended for the first…
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
Pretty much summed it all up in the first part. To install, place the underside clip in first with a slight angle or the right side upwards ready to feed that in. I've added screenshots to show the difference.
It prints great with a 0.4 nozzle, but don't size it any smaller. When it is done printing, you will have to force the arms into the body, but once they are in, it should work like a dream. This was possible because of my sister. This…
Remix Description: Added small ridges on bearing pin to create a tighter fit with ø8mm bearings. This ensures the bearing actually rolls on its internal ball bearings, rather than just freely spin around the pin. Also re-oriented the STL…
@fredster's version was too tall for my Platsa cabinet. So I shortened the long part to 160mm. So I can open both AMS so
A remix of Daniel Cox's amazing upright accurate blight tokens. Designed to stand upright, both pieces should be printed flat on the print bed. My remix provides a tighter tolerance and easier long term assembly. The base of the upright…
A remix to make the original wreath holder fit my tighter door spacing and allow the door to still shut
I like Meister Edels belt tensioner for the MK4, but I do think that it has too much play. This remix fits the standard 20*3 mm idler shaft and the original idler, with less play for the idler wheel. For assembly indstruction etc please…
Increased diameter of the balljoints from 12.6 to 13mm for a tighter fit. If yours feels loose and has a big physical deadzone, try these out they should be slightly tighter.
---Deprecated. I've designed my own elevation system. However it is compatible to JDO-solutions marble run elements. Continue here! Note: I am in no way affiliated with Ravensburger or Gravitrax. All parts are my own (derived) creations…
This is an addition I made to the Screwable tighter Bambu Lab AMS stackable stand by @Fredster . I really liked the model but I wanted to do something to top it off so that the AMS small stack didn't end so abruptly with no purpose for…
Tighter tolerance on the insert hole so it holds in place
This ist a smaller X-part for the Stand. This is long enough to open the AMS completly.
I didn't want to have to glue the included plug that holds together the Kitana Fan | Mortal Kombat made by TC_LFM so I put this one together.
I had trouble with the bottom part not holding on strong enough. Therefore, I enlarged the pegs slightly. I have two versions with different sized pegs and a cut down version of each for testfitting.
The original model was already great design but I wanted to use it for smaller cables and smaller bundles so I made some changes. The gap is no smaller so keep smaller cables in. 12mm, 16mm and 20mm version (below 12 it gets to small)…
Tighter fitment in all aspects compared to the original by TobyMcQuack. Kudos to Toby for supplying the STEP file here on Printables.
Completely remodeled it but its pretty much the same thing. Although it works fine for me, there might be some mistakes since I'm pretty new to modelling. Please let me know if you encounter any problems.
With the help of Drew Singer, I made the HSW insert hole a little smaller so the shelf would have a better fit for me
The blade holder when printed was loose on my Ultrasaber 24" blade so much there was a gap around the blade and the emitter would not tighten against the blade. I modified the original Blade_Holder STL as well as the Blade_Holder (Short)…
This is a remix of Pet Litter Scooper - No Supports by Triple G Workshop. The remix adds an additional grid line at the bottom to make the holes a bit tighter (so small dirty cat litter pieces won't fall through). The line thickness is…
UPDATE ----------- Tighter Barrels Cylinders -- Dart Zone OUTLAW 13mm inner diameter barrels cylinder for the Dart Zone OUTLAW. (0,2mm tighter than the original replacement cylinder by RedCowl) This way the darts sit more securely in the…
This is a simple cap for the Timemore C2 coffee grinder. So you can put it in your travel bag without spilling out coffee dust everywhere. EDIT 2022/09/26 I added a new version which is tighter. As I noticed the previous version could get…
I merge the Female Tag Stand into the Glock Stand in Bambu Studio wherever I need it (pictured). The magwell is tighter.
This is a remix of the rewinding spoolholder mounts for the COREBOXX Premium. I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by MIRE_19115's…
Modified front caps for the Prusa XL that reduce the gap when the Prusa Xl enclosure is attached. Model may be needed to resized based on your machine, as my gap was less than 1 mm.
Chariot CX Ski Kit Axle Adapter for drum brake models.
Really like the screwiverse system, but wanted a slightly less wobbly insert
Description The purpose of this remixed clip is to collect the PTFE-tube and Bambu Bus Cable going from the printer to the AMS-unit. The clip in the images is printed with 'Bambu Lab PETG Basic Lake Blue ' at 0.23mm layer height. The…
Tighter --- MEGA-XL Silly Shell My new MEGA XL darts slipped out of the original shells when I held them upside down. Since the standard Mega XL shell was too loose for my darts (brand-new original Nerf MEGA-XL Darts) I built a narrower…
Loved the original model, but wanted a tighter mesh on the cheese grater, so I made one! I printed it face down on the print sheet, but you could print it like how MroznyHipis suggests in his original model as well.
A tiny tweak to the size of a frame piece. I wanted a snugger ankle because I found my Dummies' feet were falling off after only a few days of fiddling around with standing poses. Now much less likely to lose a foot. Note 1 : if it's hard…
I printed the cover with fuzzy skin support only in 4 places (look at the pictures) screw position new set, the joysticks I bought have the holes in slightly different positions, so I adjusted the holes and the suspension of the joystick…
Made the inner post thicker by 1mm (to 7mm total) so that it would be a tighter fit. When I used the originals, the insert wouldn't stay in an would fly out of the dart when launched. Included the STEP file for anyone that wants to tweak…
I am quite happy with this current version. The changes work well and the card doesn't rattle around like crazy anymore. If you use your card for NFC card readers the Yubikey's NFC chip might mess with the reader because both the card and…
Nov 2025 Update: added STEP file for others that requested it. The holes that hold the shaft, for the idler gear was always too loose for me and kept slipping. So I made the holes tighter, and we just need more force to push it in. Now it…
What is this: For MK4S / MMU3 nextruder idler lever. lever A/B mod: I think the original nextruder idler lever is a little bit too lose when locked. in some cases it may even falsely trigger the magnet sensor since it's too loose. imagine…
Hello everyone! AnkleKris is back with my newest creation, and I’m proud to introduce you to the Disc Shooter V2.0! While doing extra testing on V1, I realized that, as fun as it was, it wasn’t fully complete — there were lots of places…
I found that davebpix's design was a little loose for the Sterilite box I was using. The foam was not compressed enough on the edges to create a better seal. Changes I've shortened the model 1mm at the opening for a tighter fit 0.4mm cut…
IMPORTANT UPDATE Fixes implemented in this model, together with some other important updates, are now officially implemented in the Prusa R6 version, so please use them instead. This model remains here just for reference. Original…
I have shortened the depth of each of the holes in order to make it easier to remove the bits. Printed in TPU.
I have redesign the stack small and long from https://www.printables.com/@Fredster so it is combitable with the first version of the AMS. ATH: THERE IS A RIGHT AND LEFT VERSION
Love the case but the emmc symbol on the reader was obstructed, so I put it on the case too + the arrow.
Tighter tolerances for the 8mm rods so they stop “singing” when the extruder carriage moves up/down.
Remix from cmh's great remix of UCI's new brake lever inclination tool. Had problems with fit between the sliding parts, with my printer and setting had play between part 2 and part4 so measurement wasn't accurate. Removed sharp edge and…
I had printed out the original, but the F695 bearing i had was really loose in the arm. I adjusted the bearing tolerance to be 13mm even down from 13.3mm. This seemed to let the bearing I have pop in gently and fit snug. Let me know if…
This is a remix of the original model with snap on fit to the frame.
This knob cap fits over the stock control knob on Ender 3D printers, and has a finger hole or indentation to allow the user to jog or spin the wheel with one finger. It has a knurled side surface for grip when making fine adjustments of…
The original part would fall out occasionally. I redesigned this to have a slightly tighter fit and added a feed ramp the front of the magwell entrance. You will need to remove the three screws in the XShot MPP magwell area to spread the…
Great Model, but made tolerences tighter to hold the battery more snug
This part fits with the original CV gear housings. I improved the gear hub in various ways such as press fit 0.15mm tolerances because it was originally far too loose and destroyed my gear housings. I also added the rounded edges and…
After my Lamy Safari inked my clothes twice, I searched online and found a solution to making the snap cap tighter. The forum suggested taping the rubber piece inside the cap in order to create a tighter click. It worked but I don't like…
This is almost identical to @CamRodandChief 's awesome original, except that the camera is held more firmly in place. I printed it on a Prusa XL with Prusament PETG using the 0.15mm STRUCTURAL profile and organic supports. Same as the…
I Love the Original Model, however, the two halves did not hold together well straight out of the Printer, so this remix features the bottom part only with tighter clearance for the locking nub. it is just more raised outwards and not…
I print it on the side with tree support. Doesn't work great, try this one instead : https://www.printables.com/model/1072299-heater-towel-hangerhook
The original model was not tight enouth for me when using a precise printer. Made those changes: Made the SEG_PLATEpin for CAM 1mm taller. This make the cam jumping out of place les likely. Made the SYNC_GEAR hole smaller to have less…
I love this supplement dispenser. In use, the Pill Pods would flip on me all the time and not stack properly. Probably my loading technique. I reprinted after reducing the passage way tolerances in both directions. The tighter fit works…
I like TheSameNameTwice 's adjustable spool holder very much and expanded mine with the Remix of A.N.A. but the rollers round the bearings touched the tips and the bearings did not role freely. So I remixed the tips to be a bit higher…
In printing @OnkyTonk's model that this is based on, I had the screw posts break several times, twice it happened when just pulling it off the build plate. I'm not a fan of using glue for such small pieces, they tend to move before the…
changed the shape a bit so it can be grabbed easier. added a leash to keep it from running away. Made the cap tighter both on filament side for better hold and tube side for better air tightness. it's a good fit for the PTFE tube i got…
I found that the sliding arrow would slide and fall off with the original version, so I reduced the gaps to 0.1mm to prevent this. Be sure to print the arrow upright on its side as shown in the photo.
Tighter tolerances and a slot that fits aliexpress cheapo blades (5 * 2.5 mm)
Brooklyn Tony's stock lug but with a larger od section added to the stock interface to retain the stock more firmly and eliminate wiggle.
I printed the rail riser by Toukejin, but it was loose on my storm's picatinny rails, so I redesigned just the 2 clamp files, and now it is holding well, hopefully it fixes the problem for you too. It's not much different, just the clamps…
This center cap is 1mm longer than the original closing the gap between itself and the body. It has additional locking lugs that in combination with an o-ring placed in the newly designed channel will seal the bit storage, provide much…
Gridfinity Refined Plate-to-Plate with tighter tolerances Default tolerance was 2*1.2mm, current is 2*0.1mm, distance to next plate has 0mm offset since it has enough room to move around a little. Plate is being also lowered by 0.4mm to…
This is my own take on TUSH - The Ultimate Spool Holder and a few other related concepts that add guide rails. 2021-07-09 Mk2 added for use in make-your-own-drybox with wider base and room underneath for desiccant packs. You will need to…
The heat set inserts I had were just a little smaller than the ones the voron was designed for
STEP file included. Print in PETG for flexibility, 3-4 perimeters, and high % infill for strength. Print on its edge, with organic supports for the dovetail overhang. You may have to take the edge of a razorblade and go over the retaining…
keep track of who owns which glass with these simple markers print with 25% infill, without supports also printable with fuzzy skin maybe scale the model to fit your glass
Fixes a problem I had with the clamps not being very snug on the barbell.
preferred a tighter fit than the thingiverse model and needed it to work with the thumbscrew.
I had some issues with the SOLDR flux syringe, so i adjusted the fit a bit. I printed it out of transparent PETG, which i also think helps. If doing this, i recommend to force all print speeds down to 30mm/s or similar. I also designed a…
You can play with the scaling of the cap if it is not as tight as you want it to be
No supports, No brim, No rafts. Layer height: 0.25 Wall generator: Arachne Infill: 15% Grid Top/bottom layers: 3 Wall loops: 3 Orca 2.2.0. Print time: 27 min
This is a remix of the ~"Gridfinity Caliper and Ruler Holder" head piece to fix the issue of mistakenly pressing the ON/OFF button of the calipers. I added spacers into the caliper head area to force the calipers to stay upright and never…
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
Remix of model by @rinkel, cleaned up a bit and with tighter tolerances. Fits Allen and Torx keys that come with the Prusa Mini+. Parametric Fusion 360 and .step files included in case you need to adjust it to your liking.
A remix from a great design by Michael at Teaching Tech and updated from my previous version. Upgraded Ender 3 Electronics Case for the Ender 3. I've tightened up the air handling, removed the noise-causing grille for the fan, added new…
Made the slots 0.25mm narrower for a more snug fit
After printing the most excellent "Pimax + Vive DAS Adapter" by Drcube, I had trouble getting a tight enough fit for more vigorous games. This part simply takes the "DAS_Adapter_Short_Sideways_Printable_A" part and moves the pimax…
made a easy to print version of the Body with tighter tolerances and an m8 insert instead of the screw in plastic version. just small but in my opinion good changes for this beatiful project. It's a tight fit with 0.2mm tolerances so it…
Simple device will help you to tight ziptie better
I really Liked the original from HB9GXS but I wanted a tighter fit, so I added some little nubbins and also thought about addons. Everything is Compatible with 16mm Pipes outer Diameter, like the original. House Feet: These come in at the…
Just a tighter mag release for the size M to replace the original, if your mag keeps falling out like mine did.
Modification of side mount of original by just adding 2 grooves and imprint “multi version”. Looks funny because I had to switch to another colour midprint. Also made rubber feet from TPU 60A (Recreus Filaflex).
A simple remix to my own cap to make it 1mm more gap on each side so the door does not collide with the caps. This seems better than my old cap when the front extrusion mod is installed.
