Stringing Test PETG
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
- Downloads
- 3,046
- Likes
- 58
- Rating
- 4.91
2,366 models
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Another stringing test, prints fast, requires little filament. Prints in 10-15 minutes.
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Be sure to upload makes!
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Prusament PLA Galaxy Purple Fillamentum PLA Crystal Clear Smaragd Green Height: 270mm Staff Inset Diameter: 35mm Scale Accordingly No Supports Required Printed with 5% Infill
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
These are the details for perfect stringing models- Layer Height- 0.15mm First Layer height- 0.2mm Retraction distance - 8mm Retraction Speed - 30mm/s Print speed - up to 130mm/s
The model can test your stringing and oozing behavior quite efficient up to 5 colors. The 3mf file has already sliced the 5 colors for you. It's sliced in the Alpha 2.7 Slicer version with Inputshaper, be aware about that. It's at the…
Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…
Shank size is 8 mm. It can easyly be changed into the file (centring-mandrel.scad). This is my first model with OpenScad.
A string winder for my basses/guitars, 100% fill, printed with PETG and Prusa slicer. It can also be used with an electric screwdriver.
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
This is the ultimate stringing test V4.3, along with stringing it also tests for warping. It has poles of various lengths with diameter difference at the top and bottom. It is a very hard challange for a printer to complete but I have…
FR: Version française d'un modèle payant sur Cults du test “Si vous pouvez lire ceci, régler votre stringing” EN: French Version of "If You Can Read This - Fix Your Stringing" A paying model on Cults
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
Quick to print and very cheap while having proper bed adhesion and a stringing distance of about 100mm. Note: If slicer settings like extrusion multiplier or temperature changes don't seem to change much, try using fresh filament or dry…
A perfect model to test your printers ability to properly retract filament, and test its bridging capabilities. This is done with two small towers either side causing the printer to have to travel across the middle on each layer. If the…
As much as I like string lights, I think they don’t really fit the vibe of the spooky season. I was thinking about how I could add a little halloween flair to my battery-operated LED string lights and this is the result. I’ve used…
La tige est un morceau de pointe de 45mm. On peut faire 2 supports avec 1 pointe. Mise en place avec de la colle contact néoprène. Sinon, le fichier essai de taille de trou permet de choisir la taille du trou en fonction de la tige…
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
With this sturdy and versatile mount, you can easily hang string lights for a warm, inviting atmosphere. Perfect for restaurants, patios, or home decor, these mounts keep your string lights securely in place while allowing for…
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
Drawstring bead of printing infill examples. Customise to your liking by changing the infill type or density of the pattern! Example print file uploaded using two colours. For a single colour, use the same file but print using a single…
A mod kit for the TF2 pistol by methanejuice. Please rate, like, and download so I can get free filament and keep making models. Adds: Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag. Aravage Range: 196.55in…
Unveil the essence of love this Valentine's Day with my effortlessly printable heart chain model. Crafted with affection, these hearts come in three sizes - small, medium, and large - allowing for a symphony of love to unfold. The…
A colored ring to identify a bottle from several identical bottles (for example in kindergarten) DM Babylove Trinkhalmflasche 330ml Print settings: 0.2mm layer height 0.4-0.6mm nozzle diameter no supports 100% infill PETG is recommended…
When creating a timelapse using Octolapse in OctoPrint you will probably end up with stringing ( see wiki ) at the side where you move your extruder while taking the snapshot. You can use this tower and place it in the near of the…
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
I wanted to celebrate the start of summer with a new model! I decided to try out make a swan floatie as a trinket dish. Print flat with some support under the head. MMU 3MF included Category: Sculptures
I wanted to make giant numbers using the lighting string cable. There were however no clips to fasten the light sockets to a board. These clips fit perfectly on the lamps, and secure the lamp on the board. Two clips are needed for each…
Een speelgoedje van uit de oude tijd maar dan in PLA plastiek. Het best gebruik je een nylon touw dat kan je aan de voorkant warm maken en een puntje aan duwen. Zo kan je het touwtje gemakkelijker in het gaatje steken. An old-fashioned…
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
This is one of the test objects bundled with the Original Prusa SL1{SL1S SPEED, designed to test whether your printer operates correctly. Model by TomasT. - used with permission
Cute skull drawstring beads for your clothes.No glue needed, just slide them up the drawstring. Easy to print! Only 2g filament per set! Three sizes available (diameter of the hole): 4mm 6mm 8mm 4mm and 6mm are properly the most common…
Everyone's favorite low poly skull beads! Properly test-printed and optimized for the best results. Hole size is 3, 5, 7, and 9mm. Print settings: Filament: PLA Nozzle: 0.25, 0.4mm Layer height: 0.10 - 0.20mm Support Type: Organic (Tree)…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
A fragmented skull suspended in a string frame. Print at 0.24mm layer height without supports If using Bambu Studio make sure your wall generator is set to Arachne If using Cura make sure 'print thin walls' is checked. If you want to…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
No fancy settings, simple design. You can Support me by making a small donation: https://www.paypal.me/sharad1209
I'm excited to share my small Pillow Heart Trinket Box with you. I designed it to resembles a cozy pillow in the shape of a heart. It's perfect for storing small treasures, like jewelry, keepsakes, or any little items that deserve a…
This test part is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Very good string test. It does not have problems with slicing it in Prusaslicer anymore.
File for testing retraction
This is a very long snake (over a meter long), which has a small hole in the head to insert fishing line through. I personally use this as a cat toy, but it could be used to scare some friends! In the pictures, the model is scaled down to…
petit test pour le stringing Print Settings Printer: Alfawise U30 Rafts: No Category: 3D Printing Tests
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
New Dual Colour version! I recently redesigned the text label to make the most of owning a multi colour printer. This prints well on a 0.4mm nozzle, just make sure you have good 1st layer adhesion. Set of 5 common radius, and some less…
Introduction A multifunctional tool that allows the following 4 main functions for use in the workshop: 1: Protractor, measurement and drawing of angles. (0 to 180 degrees)*. Debossed legends are included to indicate the angle#. Radial…
A String Biplane model with spinning propellor and wheels. Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne. All parts are printed without supports I found a brim…
Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.
Read the guide on stringing and oozing: https://help.prusa3d.com/en/article/stringing-and-oozing_1805 Test different retraction lenghts and temperature settings. About 8 minutes print time.
Heart suspended in strings artwork. Single and dual colour versions available Print at 0.2mm layer height If using Bambu Studio make sure your wall generator is set to Arachne. See a video: https://vimeo.com/860773935?share=copy
Took the Frog from the Flexi Frog Fidget in a Toad and hollowed it out to turn it into a fun little Frog trinket box. Made it a little stronger and improved the print quality. Printed in (3) different sizes. Great for storing or hiding…
The Modular Fiddle is a platform for violin-family instruments. I make professional quality electric violins using the Modular Fiddle platform. The files listed here make the latest-and-greatest 4-string acoustic Modular Fiddle. V4 is the…
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
A Star Wars String Artwork. Print at 0.3mm layer height without supports. Set wall generator to Arachne if using Bambu Studio)
NOTE: The STL of this model is free for non-commercial use - you are free to print as many as you want for yourself or friends, so long as there is no monetary exchange. Feel free to use this model as a basis for remixes to make grips of…
Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…
Spring is coming! So I made this delicate, floral-inspired tray to elegantly hold your cherished jewelry and small treasures. __________________ Notice: These designs are copyrighted and intended for personal use only. Commercial sales,…
Printed on my MK3S with a 0.4mm nozzle. I used the 0.3mm draft profile, the only changes I made were to check ‘detect thin walls’ and to change ‘seam position’ to rear. If when you slice the vase with the above settings it says there are…
Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.…
VANOCE | String Art Flat Ball, Christmas Tree The flat string art ball from my collection of Christmas Tree decorations . It prints 100% without supports , despite the strings floating in mid-air. Just make sure to check the recommended…
String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…
Circle String Art Print at 0.3mm layer height. If you are using Bambu Studio set wall generator to Arachne You should be able to see the strings in your slicer preview
MODEL DETAILS This Valentine's Day-themed model doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? Warning: This is meant to be extremely difficult. Keep an eye on your printer…
Guitar string winder tool. fit with bearing 608 without any tools. Manivelle pour mécanique de guitare se monte avec un roulement 608 sans aucun outil.
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
A twisty string decorative vase Print at 0.3mm layer height without supports If using Bambu Studio check that wall generator is set to Arachne.
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…
Improves grip on string launcher handle. Can pull the loop or just hold as normal with some more surface area. Snaps on and off if needed. Let me know your thoughts or suggestions!
Beads for hoodie strings with Celtic symbols and a 5mm hole for the string to thread through. I printed them in black PLA and then used metallic Sharpie pens to colour the top and bottom. A small tree support was used for the top of the…
A small but effective Stringing test
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
Gotta love that Pickleball !!! 2 parts, nothing fancy. You might need a drop of glue.
INFO: Instructions available as a PDF in the attached files. -------------------------------------------------------------------------------------------------------------------------------- Hello hello Nerfers! The Silica-5 is a massive…
A model of the golden gate bridge in San Francisco How to make: Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts. Connect the two roads with two pieces of filament (about…
This model is of a balloon dog I made but I've shrank it to mini size and added a perfectly fitted hole for a drawstring. The hole will fit any drawstring that has the plastic tip 4mm or smaller. 0.2mm layer height 10-15% gyroid infill…