Search results: tse

Sort order

467 models

P
Printables3DJG

MONTSERRAT at 1:50000 (1/3)

English Montserrat is an emblematic mountain of Catalonia. It is a symbol of my country, which we often refer to as the magic mountain. With a very characteristic topography and relief, its peak (Sant Jeroni) has an altitude of 1237 m.…

Print approx. €7.69–€9.40 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
4
Rating
0
P
Printablesachwarumnicht

L-BOXX Mini inlay Bosch routerbitset 15 parts

Hi everyone, just use standard PLA - no need for PETG or more expensive filaments. This is the routerbit set, which it is designed for: https://www.bosch-professional.com/de/de/sets-fuer-verschiedene-anwendungen-15-teilig-2867965-ocs-ac/

Print approx. €5.88–€7.18 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
22
Rating
0
P
PrintablesDaVinci

Seitliche Halterung Filamentsensor für Ender 3 V3 KE

Gedruckt in PLA (0,2mm Speed Profil auf einem MK3S) mit 15% Infill. Benötigt eine Verlängerung des Anschlusses von der Mitte des Druckers zur linken Seite. Verbinder zum Teflon-Schlauch ist ein PC4-M10 Pneumatikverbinder (Bohrung 9mm).

Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
1
Rating
0
P
PrintablesReal3Der

Weihnachtself Türrahmen

Stärke: 6mm Gedruckt auf Prusa MK4 Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: 15%

Downloads
4,200
Likes
984
Rating
5
P
PrintablesBeo666

Rocher Osterhase Ostern Geschenk Hase Komplettset

Dies ist das Komplettset, im Druckprofil findest du eine Variante mit schmalen und breiten Konturen. Such dir einfach aus, was die besser gefällt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur…

Downloads
2,593
Likes
594
Rating
5
P
PrintablesfixtSE

fixtSE DIY Smart Sensor

This remix of the esp32-wroom case and the everything presence lite it's a versatile, pressure-fit wonder, requiring zero soldering or specialized tools; just snap that ESP32 Board together with the HLK-LD2450 sensor. Then, flash it with…

Downloads
2,003
Likes
63
Rating
3.67
P
PrintablesF-Square

MMwave Multi Sensor fixtSE LD2450

This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…

Downloads
1,174
Likes
95
Rating
5
P
PrintablesUFAB

Weihnachtsengel mit Kerze

Weihnachtsengel zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck verwendet, PLA…

Downloads
877
Likes
90
Rating
5

Katseye Keychain

I was asked to make this by one one the girls on the bus I've been driving.

Downloads
713
Likes
26
Rating
5
P
Printablesdarashop

Katseye Keychain

Katseye logo keychain

Downloads
708
Likes
22
Rating
5
P
PrintablesChar

CNC Kitchen Heatset Insert for Rugged Multipart Pinecil/TS100Case (V2)

I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.

Downloads
684
Likes
143
Rating
4.73
P
PrintablesUFAB

Weihnachtsengel mit Glocke

Weihnachtsengel mit Glocke zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck…

Downloads
578
Likes
62
Rating
5
P
Printablesturtlecrawler

Fraks Flexarm - Heatset Insert Press

The Fraks Flexarm is a tool-balancing arm designed to keep the attached tool parallel throughout its movement. It was created to hold soldering irons to install heat set inserts into 3D printed parts. It has a large working area for its…

Downloads
557
Likes
312
Rating
4.83

Mt. Everest & Lhotse

I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…

Downloads
557
Likes
81
Rating
5
P
PrintablesShadow F

Katseye group logo

Katseye group logo

Downloads
545
Likes
7
Rating
0
P
PrintablesHextra

Elder Scrolls: Betrayal of the Second Era + Valenwood Insert [BOTSE]

This is an unofficial insert for Chip Theory Games' Elder Scrolls: Betrayal of the Second Era. I wanted to create something that would make setup and teardown as painless as possible while also allowing for modular setups based on your…

Downloads
520
Likes
68
Rating
5
P
PrintablesTrashedPanda

The Chaos Emerald(s) and Matser Emerald

A step in the right direction to becoming “The Ultimate Lifeform”

Downloads
504
Likes
27
Rating
5
P
PrintablesUFAB

Weihnachtsengel mit Trompete

Weihnachtsengel zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck verwendet, PLA…

Downloads
456
Likes
71
Rating
5

ROCKET LEAGUE soccer/heatseacer ball

ROCKET LEAGUE soccer/heatseacer ball is out now

Downloads
451
Likes
17
Rating
0
P
PrintablesShadow F

Katseye Logo

Katseye Logo

Downloads
448
Likes
8
Rating
0
P
PrintablesPascal

Neptune 3 / 4 Filamentsensor Extruder Mount

Neptune 3 / 4 Filamentsensor am Extruder montieren. Ihr benötigt 2 Stück M3x16 Schrauben. Es gibt 2 Versionen: Eine Standard-Version und eine mit der Möglichkeit, ein M6 Pneumatik-Fitting anzuschrauben. Wer möchte kann in das obere…

Downloads
441
Likes
62
Rating
5
P
PrintablesMust_Moisturize

M3/M4 Heatset Insert Bed Leveling Knob

Very small bed leveling knob that uses heatset inserts. They were modeled originally for the ROOK 3D printer, but I thought I would share them since I think they work nicely. Very fast print as well.

Downloads
436
Likes
28
Rating
5
P
PrintablesUFAB

Weihnachtsengel mit Geige

Weihnachtsengel mit Geige zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck…

Downloads
390
Likes
52
Rating
5
P
PrintablesNikzda

AliExpress Heatset Insert for Rugged Multipart Pinecil/TS100Case

I used the following one, i can't guarantee that all AliExpress versions will fit though. https://www.aliexpress.com/item/1005006503495825.html?spm=a2g0o.order_list.order_list_main.16.13111802lsBWzr This will fit the M2, M3, M4, M5, M6…

Downloads
339
Likes
80
Rating
4.82
P
Printablesschluppy

ATSensoTec - Halterung - Stützlastwage STB 150

Eine Halterung für die ATSensoTec digitale Stützlastwaage. Es gibt zwei Varianten, einmal für Mulitcolor fähige Drucker und eine Variante wo alles an einem Stück ist. Dazu gibt es eine Bohrhilfe. Ich drucke solche Sachen in PETG, 3 Wände…

Downloads
332
Likes
13
Rating
0
P
PrintablesYoungsterJon

Ecobee SmartSensor Stand

Replacement stand for Ecobee SmartSensors. The stand press fits into the bottom of the sensor. Optional 3mm diameter magnet can be placed in the center.

Downloads
317
Likes
21
Rating
5
P
Printableschal

Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets

The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…

Downloads
290
Likes
20
Rating
0
P
PrintablesUFAB

Weihnachtsengel mit Buch

Weihnachtsengel zum stellen und hängen! Ich habe die standard Slicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck verwendet, PLA…

Downloads
281
Likes
44
Rating
5
P
PrintablesBert Koning

Utrechtse Dom Toren

The famous Tower of Utrecht

Downloads
263
Likes
14
Rating
4.5
P
PrintablesTinyMtn

Everest, Lhotse, Kangchenjunga, Makalu, Cho Oyu 3D Maps

TinyMtn Free Pack 11 - Himalayas This is a package with sets of 3D model files for four high mountains in the Khumbu Himal. Everest / Lhotse, 8849 m / 29,032 ft Kangchenjunga, 8586 m / 28,169 ft Makalu, 8485 m / 27,838 ft Cho Oyu, 8188 m…

Downloads
260
Likes
35
Rating
5
P
PrintablesOachkatzl

Single Honeycomb M3 Heatset Insert

Edited the single honeycomb to allow for a M3 Heatset Insert

Downloads
256
Likes
40
Rating
5
P
PrintablesKing_Morris

MK3s+ PC4-M6 FilamentSensorCover

A simple remix from original MK3s+ "fs-cover" and "MK3s PC4-M6 FilamentSensorCover" by RoboMagus to connect a reverse bowden setup using a PC4-M6 coupler on MK3s+.

Downloads
253
Likes
33
Rating
5
P
PrintablesJoel G

Pinecil 11 short tip + heatset rugged case inserts

This is my first attempt at modeling something. I wanted a case that could fit at least 10 SHORT tips + all of the aliexpress brass heatsets. This includes a slot for the M2.5 heatset. It can hold up to 4 standard length tips, 2 near the…

Downloads
240
Likes
63
Rating
5
P
PrintablesW3r7y12121

Volquartsen magazine Base Pad for Ruger MK IV 22/45

Volquartsen magazine Base Pad for MK IV 22/45. Dimensioned and transferred by me to fusion 360.

Downloads
240
Likes
22
Rating
0
P
PrintablesTimePrincess

M3 Heatset Card Wallet

I printed 3Daomm's M3 wallet in december 2021 and had 2 major ideas for improvement: Heatset inserts to avoid screwing into plastic. Creep and forces on screws in plastics are not my best friends. The lever actually had 7 steps despite…

Downloads
234
Likes
46
Rating
4.25
P
Printablestee

Iran Map Tray / Nowruz Grass Tray For HaftSeen

This is a Tray in Shape of Iran's Map that i designed For grass Growing called (Sabzeh) which is a Persian (iranian) tradition for New year Celebration , enjoy .

Downloads
232
Likes
9
Rating
5
P
PrintablesShadow F

Katseye

Katseye

Downloads
223
Likes
5
Rating
0
P
PrintablesFredrik

Raspberry Pi Pico Case Top V2 with Bootsel button

Added a cutout for quick access to the bootsel button and viewport for the on-board led. Led diffuser is optional and should be printed in something translucent (clear petg/pla e.g) and use superglue to mount it. Use original authors…

Downloads
222
Likes
33
Rating
5
P
PrintablesClutch Kick

FlashForge AD5M Heatset Insert Toolhead NOW Uploaded V2

New version 2 of my duct is live, I have adjusted the spacing where the heatsert goes and closed the front. The fan should fit snugly onto the colums where the heatserts sit. Then you use 2 m3x16 BHCS to secure the fan. Much cleaner and…

Downloads
219
Likes
50
Rating
5
P
PrintablesZeshak GER

Frontseat tilt Lever for Nissan Micra K12

Its the Lever for tilting the Front Seats of a Nissan Micra K12. My sisters car didnt have the one on the right side anymore so I made this. If you need any adjustments let me know. Please print this out of PETG/ABS/ASA as PLA wont hold…

Downloads
218
Likes
9
Rating
0
P
PrintablesSapuSeven

Heatset Insert and Triple Tip Storage for Rugged Multipart Pinecil/TS100 Case

This insert takes the original “TS100/Pinecil Top Large” insert and adds storage for all 7 heatset insert bits that come with the AliExpress tip. Also has a bit larger tolerances, which makes it easier to remove the small bits.…

Downloads
214
Likes
44
Rating
5
P
PrintablesRoboMagus

MK3s PC4-M6 FilamentSensorCover

A simple modification to the new MK3s filament sensor cover (sourced by jzkmath) to connect a reverse bowden setup using a PC4-M6 coupler.

Downloads
213
Likes
26
Rating
4.5
P
PrintablesDKlarations

Dremel Heatset Insert Press Adapter (For Dremel 220-01 Drill Press)

I wanted a Heatset Insert Press and I realized that I have a Dremel Drill Press that I haven't been using - Thought I'd be able to make a little adapter for a soldering iron. Just about any of the inexpensive Amazon soldering irons will…

Downloads
213
Likes
41
Rating
5
P
PrintablesRyly Dou

Heatset Insert Cassette for Aire (Activated Carbon Mod for Ikea UPPATVIND Filter)

This model is optimized to use heat set inserts and also removes the unnecessary screw in the middle of the cassettes. This only includes models for the filter cassettes, for the rest of models needed for this project check out the…

Downloads
203
Likes
29
Rating
4.86
P
Printablesmptrs

iFixit mako bitset holder for Ikea Skadis

Because I'm a T-nuts system fan I had to remix this one. Two mounting holes should be more than enough to keep this one steady on the Skadis. Took this model because it's not a massive print and it looks really nicely finished with the…

Downloads
198
Likes
41
Rating
5
P
PrintablesChristian H.

Voron Door Handle - Heatsets

First of all thanks to Chris for the original version of this great handle! Its a nice big handle that fits big printers like a Voron V2 and Trident perfectly. Since I like sturdy screwed parts more I created this version using the…

Downloads
191
Likes
25
Rating
5
P
PrintablesMD3D

Heatset insert - Test

Test your Inserts This object was created to experiance my first heatset inserts in 3D-printed designs. Since i just started using these in my designs, i wanted to know how i have to design the holes for the inserts to get the best…

Downloads
190
Likes
31
Rating
5
P
PrintablesRockNLol

Gridfinity Storage Container for CNC Kitchens TS100 Heatset Insert Tip

A 3x1 Gridfinity Storage Container for CNC Kitchens TS100 Heatset Insert Tip in the Sizes M2-M8.

Downloads
188
Likes
43
Rating
5
P
PrintablesPeter Leiwand

Qidi X-Max3 Mod FilamentSensor AdaperPlate

The Qidi X-Max3 is prob the best consumer printer right now with some minor flaws. Most of them are easily fixed with some modding. One of it is the back-mounted-filament-box/hanger. This is unpractical. Whatever you use instead, like a…

Downloads
178
Likes
32
Rating
5
P
PrintablesAxField

TS100/TS101 stand for HSW - with heatset holder

A TS100/TS101 stand for HSW with additional pockets for the CNC Kitchen heatset insert tool bits. This one should be printed upside down (as oriented in the STL) to allow for the HSW plugs to be properly printed.

Downloads
173
Likes
48
Rating
5
P
Printablesetotheipi

Dragon UHF EVA3 adapter (heatset) - Remix with space for heater cable

It takes a scavenger hunt to find an acceptable DragonUHF adapter for EVA3. And the one I found has cable-routing issues. I modified it to give extra space for the heater cable to come out the side. It's still not perfect but it's good…

Downloads
172
Likes
10
Rating
5
P
PrintablesDaki3D

Filamentsensor Halterung für Ender 3S1 / Filament sensor holder

Halter passt auf eine 20x 20 mm Profil. Ich habe den Sensor mit einer M4x 16 mm Schraube befestigt. Gedruckt mit PLA.

Downloads
171
Likes
15
Rating
5
P
PrintablesDJwasilCZ

Bag Clip Peg FastPrint&MattsEco package pin

No supports Infill 35% good Layer 0,2 good Basic clip for anything, low filament use, fast print Default size is approx 5cm X 2cm X 0,6cm If you need it for bigger bags, size it up in your slicer according to needs You can use different…

Downloads
171
Likes
22
Rating
5
P
Printables3DJG

MONTSERRAT mountain al 1:40000 (2/3)

English Montserrat is an emblematic mountain of Catalonia. It is a symbol of my country, which we often refer to as the magic mountain. With a very characteristic topography and relief, its peak (Sant Jeroni) has an altitude of 1237 m.…

Downloads
164
Likes
13
Rating
0
P
Printables3Daemon

Umikot 58mm Mechanism and Spin Ring modified to receive M3 HEATSET INSERTS

In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…

Downloads
164
Likes
25
Rating
5

Gridfinity Ruthex Heatset Insert Tip Bin

PATCH NOTES 02/09/2023: ADDED MODEL NOW WITH LABELED LOCATIONS Printed in PETG 0.2 , 15% infill - line pattern. Designed in Onshape

Downloads
162
Likes
32
Rating
5
P
Printablespipsel

Ikea BILRESA 3D-Models (original from Ikea itself)

On the Ikea Website of the bilresa remotes (with wheel and dual button) you can view a 3D model of the remote. There is a nice tool on github to download the 3D model in the GLP format - or you can extract them from the source code. The…

Downloads
158
Likes
9
Rating
0
P
Printablescsp1981

Ender 3 V3 SE 25mm-40mm hotend fan adapter heatsets

I wanted M3 heatset inserts for mounting the upgraded hotend fan for my Ender 3 V3 SE. Ended up remixing the fan adapter from KILLbabylon to size the 40mm fan mounting holes out to 4mm to use the heatset inserts. Thanks KILLbabylon for a…

Downloads
157
Likes
26
Rating
5
P
PrintablesHow To Homemade

OpenPrintSense | 3D Printed BLE Flex Sensor Glove

OpenPrintSense - 3D Printed BLE Flex Sensor Glove OpenPrintSense is an open-source project that combines 3D printing, hardware, and software to create a wearable finger tracking system. The key innovation is a fully 3D-printed flex sensor…

Downloads
156
Likes
307
Rating
0
P
PrintablesAndreDesigns

Thumper Block with integrated Runoutsensor

If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) This is a very basic runoutsensor for your thumperblocks. Up front you should only do this with a fresh build. otherwise you have to remove…

Downloads
152
Likes
28
Rating
0
P
PrintablesKilla_Prints

Lerdge iX Parts w/ Heatserts

The stock parts thread right into plastic. I wanted parts that could withstand repeated disassembly. This remixes some of the stock parts to accept heated inserts and adds room for a probe like a Pinda or Super Pinda. The X belt tensioner…

Downloads
152
Likes
26
Rating
0
P
Printablespipsel

Ikea Styrbar 3D-Model (original from Ikea itself)

On the Ikea Website of the styrbar remotes (silver and white) you can view a 3D model of the remote and the remote including the mount. There is a nice tool on github to download the 3D model in the GLP format - or you can extract them…

Downloads
151
Likes
9
Rating
5
P
Printables3DJG

MONTSERRAT mountain at 1:25000 (3/3)

English Montserrat is an emblematic mountain of Catalonia. It is a symbol of my country, which we often refer to as the magic mountain. With a very characteristic topography and relief, its peak (Sant Jeroni) has an altitude of 1237 m.…

Downloads
144
Likes
11
Rating
0
P
PrintablesJoris Schouten

Utrechtse Dom toren 3D - Hangend Ornament

Hangend ornament van de Utrechtse Dom toren. Ontworpen zodat hij in het LOMVIKEN 13x18 fotolijstje past van de Ikea . Perfect voor een echte Utrechter. Kan geprint worden zonder support en 15% infill is genoeg. 0.2 mm layers en dan na 1mm…

Downloads
144
Likes
14
Rating
5
P
PrintablesAmazing3D

Pinecil Heatset Insert for Dewalt Tough Case

This is an insert for the Dewalt Tough Case to hold the Pinecil and CNC Kitchen Heat Set Insert kit. Also included is a simple corner divider and dovetail test piece. Fusion files are included if you want to modify them.

Downloads
143
Likes
46
Rating
0
P
PrintablesAXAL

Skadis Bosch bitset holder

Support is required

Downloads
142
Likes
27
Rating
0
P
PrintablesKenneth Walters

Manta M8P - Fan Mount Heatset Remix

Modified fan mount for using M3 brass inserts

Downloads
141
Likes
16
Rating
0
P
PrintablesAlucardi

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS heatset version

Added heat set inserts to the filament guide slide. Having to adjust that depending on spools will wear out the threads in plastic fast.

Downloads
141
Likes
22
Rating
0
P
Printablespotatoworld

SetForge v1.0 - Heatset Insert Press

I've been using more and more Heatset inserts in my projects recently and have been wanting to build one of the many soldering iron press designs that are out there on Printables, but couldn't decide on which one would be perfect for me.…

Downloads
138
Likes
54
Rating
0
P
Printablesdowhilegeek

Heatset insert for H1

I'm a sucker for heatset inserts, and I figured if you're occasionally maybe opening the device, might as well put a heatset insert in there, remove the chance of breaking plastic threads. This remix was made with CNCKitchen's short m3…

Downloads
135
Likes
17
Rating
5
P
PrintablesRanchBear

EcoBee SmartSensor BackCover

Factory backcover modelled for DIY installation Angled backcover - https://www.printables.com/model/725307-ecobee-smart-sensor-angled-back-cover

Downloads
134
Likes
3
Rating
0
P
Printablesedsai

T-Beam Supreme Case with 1/4-20 heatset insert mount

Heatset threaded insert I'm using can be found here: https://www.amazon.com/gp/product/B08PVQX853/ Reinforced the area the insert goes into. Everything else is the same as their original design other than the insert hole and the inset…

Downloads
132
Likes
19
Rating
0
P
Printablesryzenchr

UHF Stealthburner CPAP Heatset Fix

For the UHF stealthburner cover with CPAP and two piece PCB I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter…

Downloads
131
Likes
20
Rating
0
P
PrintablesMajor Hack

M3 Heatset Standoffs 10mm-30mm

Use one M3x4x5 heatset insert on each side. Prints fine on it's side without supports. Feel free to comment if you want a different size, or make it yourself using the OnShape CAD files

Downloads
131
Likes
9
Rating
0
P
PrintablesMON5TERMATT

HSW M3 Insert - Heatset Insert For Mounting.

PLEASE POST A MAKE OR A COMMENT IF YOU USE THIS FOR A LONG TIME. I NEED FEEDBACK IF THE OPENING IS TOO BIG FOR THE INSERT. I would like to point out the difference between this model and this other version found here is that this one…

Downloads
127
Likes
30
Rating
5
P
PrintablesScorpiusDE

weihnachtsengel

weihnachtsengel

Downloads
124
Likes
12
Rating
5
P
Printablesplaisthos

Gridfinity Storage Container for CNC Kitchens TS100 Heatset stackable

This is a remix that lays the tips flat in order to allow it to be stacked or put into box.

Downloads
124
Likes
34
Rating
4.75
P
Printableskarl-herbert

Prusa Mini Gehäuse für Filamentsensor

Was mich beim Filamentsensor Gehäuse gestört hat ist die Tatsache, dass bei jedem vorsichtigen Versuch das Filament zu entladen und zu entfernen sich der vordere kurze PTFE Schlauch aus der Verankerung gelöst hat. Ich habe eine PC4…

Downloads
123
Likes
31
Rating
5

Multibin Screws and heatset inserts storage drawers

My Thanks the the Multiboard Team over at Multiboard.io if you haven't checked them out then you should. all parts were printed on a Centauri carbon using Elegoo PLA Rapid Plus with standard settings. no supports are required. I will not…

Downloads
121
Likes
16
Rating
0
P
Printablesrxg

Voltset VS-100-4IN 4 inch inline duct fan blade

Description This fan had a blade break off, so I reverse engineered it in FreeCAD using point cloud data from a 3D scan using Revopoint MetroX. It's a Voltset model VS-100-4IN 4 inch inline duct fan, and their support confirmed they do…

Downloads
121
Likes
27
Rating
0
P
PrintablesJbcdu87

NOTSEK 54mm Bottomless Portafilter Tamping Station

I wanted something that I could use as a tamping station that can hold my NOTSEK 54mm Bottomless Portafilter , Normcore 53.3mm Spring Loaded Tamper and a custom puck screen holder ( that can be found here ) that holds 54mm puck screens.…

Downloads
121
Likes
7
Rating
0
P
PrintablesJon

CNC Kitchen Pinecil/TS100 Heatset Insert tool storage case

This is a remix, I made the heatset tools fit better, the lid to close nicer, and all tolerances are made for printing with abs/asa in mind. The heater pocket is too big, so it will fit all variances described in the original holder. No…

Downloads
119
Likes
21
Rating
5
P
PrintablesReeverson

DIN Rail Mount Heatserts (Buck Converters & Relays)

Remix of qwertmodo. Use heat inserts to mount differnt electronics to it.

Downloads
115
Likes
25
Rating
0
P
PrintablesPeter Farell

Steam Punk Gun by Allen Tseng

Steam Punk Gun by Allen Tseng Fixed and added UV displacment for details. note: the .obj file is one solid object if you want to use it for a figurine or the ilk. This was a hard fix. More steps than usual due to differences in poly…

Downloads
114
Likes
29
Rating
0
P
PrintablesSliver3d

H2T Back w/ Heatset Insert

I wanted to make the already awesome H2T case by Muzi a little more robust by adding a heatset insert to marry the two halves together. Here is my rendition of that. You will want to use an M3x5 thin-wall heatset insert. These are the…

Downloads
113
Likes
6
Rating
0
P
PrintablesHL

Xshot Longshot Half Dart Magwells - M3 Heatset Inserts

Heatset inserts (M3 thread, 4mm length, 4.5mm outer diameter, 3.9mm nub)https://www.aliexpress.us/item/3256805034317562.html M3x10mm button head screw See original model for printing instructions. You probably want extra walls so there's…

Downloads
111
Likes
23
Rating
5
P
Printablesthekojent

Prusa Mini+ Revo Micro Toolhead mod - ADXL and Nutserts

Not a fan of screwing into plastic or square nuts, and I wanted some spots to mount an ADXL. CFD optimized duct gets a nutsert for the Probe mount and an ADXL mount on the rear. Hotend mount gets some fan nutserts (no more stripping those…

Downloads
110
Likes
20
Rating
3
P
PrintablesPyrosheep

Lowered CNC Kitchen Heatset Insert for Rugged Multipart Pinecil/TS100Case (V2)

I wanted to equip my TS100 Case with the inserts from jamie xu and Char to accommodate both my desoldering pump and my CNC Kitchen Heatset. Unfortunately, the TS100 collides with the stand holder due to the customisation of Char , so that…

Downloads
108
Likes
26
Rating
4.5
P
Printablestrrevvorr

Ecobee SmartSensor Clip

I designed this to strap Ecobee's temperature sensor to a bassinet so the room's temperature is tailored to the baby. Print with supports and extra outer layers for best results.

Downloads
107
Likes
9
Rating
0
P
Printablespyrho // 25.wf

Ball mount with M3 heatset insert for Sneak's Articulating Raspberry Pi Camera Mount

I really like Sneak's design for the ball camera mount, but wanted to be able to secure with an M3 bolt instead. The ball is the same as in the original design, so you can re-use the Pi Camera case from sneak's design.

Downloads
107
Likes
13
Rating
5
P
PrintablesSvennixx

Bigtreetech U2C Mount heatset inserts

Remix of the great yet simple mount from Tom. Added heatset insert holes on the bottom side of the mounting plate.

Downloads
107
Likes
14
Rating
5
P

Gridfinity Hakko Heatset or Soldering Tip Holder

Basically a GridFinity (by Zack Freedman) holder for Hakko Heatset or soldering tips.

Downloads
106
Likes
17
Rating
4.5
P
Printablesamekyras

M3 Heatserts Pi/SKR Pico Mount for Voron DIN clips

Takes Voron standard (M3x4x5) heatserts, hole spacings fit 24mm, 31mm, and 51-52.5mm DIN rail clip screw points

Downloads
106
Likes
6
Rating
0
P
PrintablesPiercet

Lulzbot Extruder Beefy Idler Block for Greg/Wade style extruders - Heatset Insert Edition

Here This is based off the latest 0.4 Beefy lulzbot Idler variant (which compared to 1.4c is basically 2.0 anyways), licensing is Creative Commons Open Source Attribution as usual. Please feel free to use this part in any manner you see…

Downloads
105
Likes
1
Rating
0
P
PrintablesIan_Makes

Ecobee SmartSensor Wall Mount

This is a simple sit-in wall mount for the newer, more rounded style of Ecobee SmartSensor. It has a recess in the inside bottom for an 8mm x 2.5mm magnet (optional, just for a more secure hold). I used a 3M command strip (from a Small…

Downloads
103
Likes
6
Rating
5
P
PrintablesPaweł Kwapisz

Katseye

Model przedstawiający piosenkarki + scena + oświetlenie.

Downloads
101
Likes
6
Rating
0
P
PrintablesAndrew

MGN12H Dummy Carriage w/ Heatsets

Couldn't find an adequate MGN12H dummy carriage to be able to mockup my toolhead before I have linear rails. Uses 4 heatset inserts, print standing vertically as shown. BOM: 4x M3x5x4 Heatset Inserts (Voron spec)

Downloads
100
Likes
10
Rating
0
P
PrintablesThomas Smit

Voron Bowden tube guide with M5 Heatset Insert

I bought some M5x5.8mm heatset inserts that I wanted to use, this seemed like the perfect usecase for them. Make sure the mating surface between the bearing and the heatset is flat, if any pieces of plastic stick out they might impede the…

Downloads
98
Likes
20
Rating
5
P
PrintablesMorizzza

A puzzel a day deutsch - Jeden Tag ein Puzzel/Rätsel Kalenderrätsel

Jeden Tag kann man das akutelle Datum legen, inklusive Wochentag. Beim drucken darauf achten den Farbwechsel des Filaments auf die richtige höhe zu setzen, die zeichen beginnen bei z 1mm, also auf die nächste schicht den Farbwechsel…

Downloads
97
Likes
16
Rating
0
P
PrintablesFrozenBubble

Sherpa Mini Captive Nuts instead of heatset inserts [SLA tolerance]

NOTE: this model is toleranced for SLA printing. It was edited in Onshape and I have parametarised the m3 holes, bearing slot and captive nut slot. The parts which I have edited have a prefix “EDITED” the rest in the onshape document are…

Downloads
97
Likes
8
Rating
0