112 models
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Best be printed in PLA to nail the overhangs from the tire studs. No support needed in this case.
Description Many of you have already asked for the profiles since the official files are not yet available. Now I got the release from Mikolas to post my files here to give you the possibility to create and test more extensions. I have…
UPDATE 2023-12-20: It appears I ended up uploading my modelling files instead of the models. If you downloaded .fcstd files, please download the new files. Sorry for the confusion! Uploading because the Dorformantik-Community has been…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
This is a pendant design inspired by the logo of Elden Ring video game. It's made With Cinema 4d and exported as an .stl. The default size should be around 8cm (3 1/8 inches).
When doing my full disassembly teardown, and then reassembly, I found the rivets quite tough on the fingers so I've created a tool to help deal with them. This will allow you to re-use the rivets too. Printing Print on it's back with the…
This is a case for Raspberry Pi 5 supporting official fan as well as unofficial fan. Supported cooling configurations This case supports following variations in terms of cooling. No fan Official fan Unofficial fan (40x10), eg. Noctua…
I re-created the Samsung Galaxy Ring Sizing kit in fusion 360. Not for commercial use, because samsung sells these. They're only $10 and available at stores like Best Buy. Dimensions of my printed samples are accurate to within a tenth of…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
Bambu's new TPU-For-AMS is a contentious material , primarily because the default profile is not good (which is often true, sadly). Annoyed that I got 4 rolls of this stuff that kept breaking along Z-layer lines, I set out to fix this. I…
This is a replica of a 2019 NFL helmet with a Carolina Panthers logo on the side of it. Prusa's can make it about big enough for a house cat. Larger build areas make it possible to wear the helmet. Print instructions V2 added with thinned…
Having done a full disassembly and reassembly of the Prusa Core without instructions I felt in a good position to provide some assembly jigs to help you when you decide to do the same, or just for maintenance etc. X Rail Jig Print TWO…
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
Please Read!! This is not meant to be a printable model . I uploaded the STL just so we can see it in the 3D viewer. Use the STEP or Fusion 360 File: This model is meant to be used in the additive design process for making designs that…
Huge thanks to Ryan of V1 Engineering, the Generous Genius, for sharing his wonderful machine designs with the world. This is a remix set related to the amazing LowRider v4 DIY CNC . For orientation on what is meant by “front” of the…
The face gasket that I got with the beyond put too much pressure on my nose. Also, the eye relief was too large, which limited my FOV. I designed this base and then boolean subtracted a 3D model of my face from it. With this 3d printed…
I made two minor adjustments. The first one is probably insignificant for most people, but it bothered me a bit. The curved surface on which the riser rests did not sit completely flush with the case. The second and more obvious change is…
(Also Quidditch Beirut, for the traditionalists ;) ) This is a simple "Quidditch" hoop set for the increasingly popular Quiddich Pong game. Its basically American Beer Pong with hoops added to the game board for more complex gameplay. I…
I can't believe I'm back to uploading with this. I am sorry. 10cm wide. Does not include curse.
I couldn't find the part in the Prusa printable files collection, so I created a similar model. Print in PETG or PCCF depending on which materials you are printing. Standard 0.2 mm structural settings.
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ Uploaded: November 4, 2023 Reverse engineered CAD model for the EnderXY. Printer was dissasembled and each part measured and printed to compare for maximum accuracy,…
When your seven-year-old son asks "Daddy, can you print me pinewood derby wheels?" there is only one correct answer, and it isn't "no". This wheel was designed using drawings of the actual wheels and should be dimensionally accurate.…
Take your Prusa CORE One to the next level with this unofficial, 3D-printed advanced filtration system , designed to enhance air purification performance while maintaining a clean, compact look. This version is inspired by the original…
This is my unofficial model for Qidi X-Plus/Max 3 Original Spool Holder Cap - single or 2 part versions. It fits perfectly my Qidi X-Plus 3 spool holder. Printing I recommend single part model, unless you are fine with gluing the parts…
This is a box and lid for the Cards Against Humanity game. Inside there are two receptacles, one for the white and one for the black cards. The box is square so the lid can be put on in any orientation. This design can be printed in one…
This is a model I created for my RatRig VCore-4 500 IDEX. Some models don't import in the correct orientation. Main Body - Print with its back on the bed Fan Grill - Print with “RatRoaster” face down on the bed Heater Grill - Print with…
This is just a small fan built coin with the logo of the Stray game logo. All rights/trademarks belong to their respective owners.
Remix of this model made by Matias Rossi. It houses the Nextion 2.4" display on machines like the Rancilio Silvia. I made this to mount it on the bottom part of my Silvia V3. You can then route the cable on the underside. What has…
I use this cube to test my Akula-class motion system with Magnetic IDEX toolheads. Enjoy the print challenge 😀
Diabetes technology is part of everyday life, but it does not have to feel purely clinical. This unofficial Omnipod® pod cover gives the pod shown in the photos a more personal, colourful look and can make everyday wear feel a little more…
This is an xPod variant of the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used with the xBloom Studio xPods. Thanks to EAF member @wonderllama for the dimensions of the xPods. Brewing note: I recommend…
Only for LowRiders that are riding on metal strut (unistrut / superstrut). This mod moves the long axis belt (on the wheel side, not the rail side) down inside the metal strut, which both hides and protects it. In my case, this also makes…
The expansion come with tokens that you put facedown to indicate hidden movement. So I made some for 3d printing with multiple layers. I made 2 version: One that is printed in two halves and then glued together. Works nice for color…
Models to print with resin (28mm+ scale) recommend revisions. Objs files of the base models to edit. 3D skill require.
Why First, I must say that I really love Juggernaut Case products. I had a Galaxy S20 with their case and belt clip, but then I decided that I wanted a degoogled phone, so I went with the Pixel 6 option. But Juggernaut does not make cases…
Here is a fan made logo for the New World MMORPG. It's unofficial. FDM friendly. No affiliation with the game makers. Feel free to remix, do fun things with it and share it with us.
An unofficial hose adapter + spacer/brace thingy to zip-tie your 1.5" shop vac hose to the LR4. There will be an official LR4 1.5" hose → 2.5"dust shoe adapter from v1e, but I made this in the mean time to get started. This is…
I adapted this model for the one in the QUBE 500 because 2 were missing from the box. scale at 99% if they are too tight print with a brim if usually small parts don't stick on your bed: I used ASA at 0.12 with a 4mm brim. a good idea…
Driptray replacement i made, the hole could be aligned better, so i added the step file for it
STEP file for Jacob Williams "Unofficial XRP Kit CAD" OnShape model (06/20/2024)
Just added a hole to this coin to use as a keychain.
To save my cloth-covered Google Home Hub from nasty spills involving tasty beetroot, I quickly designed this stand for it. Tried to replicate some of the same curves used in the device but I'm definitely no artist. Print Settings Printer…
Upgrade, expand and organize your Merchants & Marauders copy with beautiful and detailed ports, flags and other goodies as well as 3 of the modules present in the Seas of Glory expansion (Wind, Storm and Treasure Galleon), all fitting in…
As of July 5, 2024 the official GCODE for printing the MMU3 printable parts is done with the Print settings configured for ‘SPEED’ rather than ‘QUALITY’ and makers (myself included) have reported problems using the provided file. This…
An independent, unofficial 3D reconstruction of the CNC aluminium Voron Tap V2 probe. It was modelled from the build guide drawings and from measurements taken on a real part. ☕ Found this useful? We're raising funds for a CNC mill →…
Lost the original holder for the Pipetboy that comes with the device, so I made one myself
This will allow you to mount a 120 mm fan above your PCI slots for extra cooling. I use a 2mm bolt to attach the bracket to the case as that is about the size of the slots on the case. The bracket will accommodated a fastener that is up…
So I liked style of Hive tiles in “ Hive Boardgame ” from Blackp0ison and in “ Hive! Boardgame - Expansion Bugs ” from @3DPrintSOS and decided to make expansion called dragonfly. I took design from stl file in “ Expansion Dragonfly for…
Added Y-rail clips for 32mm tubes, and Y-rail unistrut-placement-jig for 32 mm tubes. NOTE: tested by a fellow maker, and reported as working. Kudos and thanks to Spadman , @Spadman_112096 , for doing the testing. NOTE: I encourage new…
A simple bracket for mounting the Cleveland Software Design service board inside of the coin door. A ribbon cable comb is modeled in to keep things neat and tidy. Be sure that you connect the ribbon cable to the same pins on the PinOne…
[Unofficial] LowRider v4 dust shoe modified to: allow two-wrench method of tool change AND work with Kobalt router (maybe also Makita) Posting at request of a V1E forum member! NOTE: some of the pics are of a TEST print just to check for…
This is the world smallest one thousand piece puzzle. And you can print it! The only reason that this is unofficial is because the puzzle has to be commercially available to qualify for the title.
An easy to print stand for your figurines. This fits Labubu and Hirono figurines well, and may fit other figurines that are roughly the same size. The height is adjustable. Put the parts together, and place the arm ring around the neck of…
If you have never taken this cap off be carful, the spring has a lot of tension. I had some trouble with warping when printing this, after trying a few different things I added 3 tabs to the model (see picture) to prevent the warping.…
At some point, it seems that Belt3D began shipping the backplate with slightly larger dimensions and more mounting holes. This backplate measures nominally 50x55mm. Measure yours to see which model applies.
il faut 4 inserts , 4 vis 3x10 , 4 vis 3x12 et 4 écrous et rondelles de 3mm j'ai utilisé une prise coudé pour alimenter la drybox…
Case for headless mod of Gaggiuino which uses the 'hacked' FW from https://github.com/a4vgx7b2M/gaggiuino-esp32-loader . Will hold the ESP32-S3 devkit (e.g here ), JST XH 4pin male header ( here ), and SD car reader without voltage…
This just a my replacement part i made uses a bolt and a 3D printed part part needed M6 bolt, 40mm minimum length https://www.ikea.com/sa/ar/assembly_instructions/rigga-clothes-rack-white__AA-712786-6-2.pdf
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ Edit: This appears to be correct for the first batch only. If yours has more holes then this backplate will be incorrect. Check the remixed version for the updated…
Unofficial Drybox - Modified B-Pillar with wall mount feature
IO Shield made for the ITX Llama in v1.0.0b6 Note that this is an unofficial version made partly from measurements and the partly from the IO Shield ATX specifications. Feedback for further revisions are very welcome. Printer Settings…
Absolutely unofficial german Traffic Signs 250 ff "Interdictions" in original size of 600 mm which I made for a friend who isn't really fond of electric cars… You'll need a multicolor capable printer or use different element heights with…
I've recently been working on building a MP3DPv4 3d printer by V1engineering. I wanted a holder for the end of reverse bowden tube. I was able to fit the holder between the two belts on the back of the machine. I used M6 tube holders off…
Magnetic Bit - un Official LTT This is a easy bit to use in your LTT screwdriver, or Xiaomi Screwdriver. You will need too glue the magnet in the hole. You will need an 6mm x 3mm neodymium magnet. Simple design for a simple soulution. :)…
This is a custom wall mount designed for the official GoPro HERO 13 dual battery charger . The mount is fully compatible with the IKEA SKADIS pegboard system , allowing you to keep your charger securely fixed, save desk space, and always…
I remixed this cover to fit a flipper case I bought from Aliexpress which varies significantly from the official case. It is designed to cover and protect the iButton/1-wire pogo pins. Print requires some supports but it prints quickly…
Original models, and remixes of Sovol/Bondtech/3DPrintDemon official CAD models: Blank Tool Joiner/Spacer Remix for EU 1515 Use BS/Snorca,OrcaSlicer/PrusaSlicer text tool to add numbers or text to your liking. There are two options, the…
Unofficial U.S. Navy–Inspired Multicolor Ornament (3D Print) This is an unofficial, fan-made U.S. Navy–inspired ornament , designed specifically for multicolor FDM 3D printing . The model is optimized for clean color separation, solid…
Uses 3x M2x20 Screws, and 3 M2x2x3.2 heat set inserts
This is a bunch of improvements of the RepXL rolled into one build plate. Read the instruction for what was change and added. I just made a ton of changes and additions to the file on 11/25/12. Read about the changes in the instructions…
A custom Tridex logo for the Anthead toolhead. I have only modified the main body for standard flow (SF) with the Orbiter 2 mounting holes (O2). If you want this same design for another main body, let me know and I'll see when I can get…
This is figure data created by generative AI.
Show off and commemorate the love and appreciation 🥰 the Prusa Printables community gives you for your published models, makes, articles, posts or anything else that is liked with one of these custom fan made badges. Each features low…
This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad) from afternoonlabs.com, it uses: 7x M3 screws 4mm for the PCB 8 10mm for the faceplates. The SVG EPS, AI and DXF files is to laser cut…
Sovol SV08 – Bed‑Lift Spacer Set for Indx Toolhead Compatibility If you’re running the Indx system on your Sovol SV08, you’ve probably noticed the toolhead sits higher than the stock configuration — which means the bed needs to be raised…
Hopefully it will help some people. How to use it: The grip has a really tight fit to make sure the pen can't slip or move around. To attach the grip to the pen, there is a mounting tool (StabiloPointViscoGripMounting). Simply slide the…
These border pieces are my own original design, created specifically to be fully compatible with the official CATAN – 3D Edition board game. 🧩 Fit: Carefully dimensioned to match the original 3D Edition pieces. 🎲 Purpose: Helps you…
Been working on this one for a while, now that it's gotten more popular with the original client. I developed an MMU version of it for their quarterly award. As you might infer from the file names, their request included the capability to…
This is a custom wall mount designed for the K&F Concept NP-FZ100 battery charger (with dimensions of approx. 21.5 × 54.1 mm) , which is often bundled with dual battery packs (2600mAh). The mount is fully compatible with the IKEA SKÅDIS…
Recently stumbled upon Lauren Ko's instagram ( https://www.instagram.com/lokokitchen/ ) where she makes pies with geometrical shapes. I instantly knew what I needed to do - blatantly copy this woman's designs and make them into...80mm fan…
Disclaimer: I only add vault on the back, the whole puzzle box is created by: https://www.printables.com/@LeisureLuke_111431 Concept: I love The Heist - Puzzle Box by LeisureLuke but I was missing a gift code stash when I printed them out…
This case was designed by myself using Sketchup. I added a separate microusb jack to power the MDT from an external usb power pack. The original case did not have any room left to add a usb jack. The MDT build is a somewhat complicated…
This is a custom wall mount designed for the official Canon CG-A20 charger , which is compatible with BP-A30N, BP-A60N, and BP-A60 batteries . The mount is designed to fit the charger securely and is fully compatible with the IKEA SKÅDIS…
This is an unofficial mod for LowRider v4 - it's made to be part of my earlier remix here: https://www.printables.com/model/1178649-unofficial-lowrider-v4-diy-cnc-for-use-with-unistr As requested by fellow maker Matthew Davidson on the…
Unlock the future of decentralized technology with the digital BlockDAG Coin Model! Perfect for crypto enthusiasts and tech-savvy individual. This digital model is ideal for adding to your virtual collection, using in design projects, or…
Depending on how you play the game, you may need 15 to 35 or so of these Dorfmats. The moving pieces print in place and interlock with neighboring mats. The Dorfmat is designed to stack during transport and storage. I printed this version…
This is a custom wall mount designed for the RAVPower and BLUMAX NP-FZ100 battery chargers (older generation models) , used with Sony Alpha cameras such as A7III, A7IV, A7R III/IV/V, A7C, A7S III, A9, FX3, FX30, and others . ⚠ Please…
for anki cozmo ,and vector to clean. no supports needed
I recommend to use PETG an to print it in a 30° to 45° angle with support for proper strength! ASIN: B07PBV7GH1 Item model number: C-10049FM-30L
This resource provides the 3D model of the spoolholder cap in .STEP format, specifically designed to help makers easily participate in the Printables contest: Custom Spoolholder Caps . Having a STEP file makes CAD modeling significantly…
Cards are stacked in the holder while your phone is positioned using the built-in rail system, which allows X- and Y-axis adjustments for perfect scanning alignment. Works with phones who have a left or right camera position. Perfect for…
A set of printable parts to mount the MiSTress1200 board (from 8bits4ever) in an Amiga 1200 case. These are not the official STLs, they've been recreated from scratch by taking measurements (which are likely not as precise as the…
These are the companion files for my Youtube video about upgrading the SeeMeCNC H2 Hacker series to use an Orion Heated Bed. See video for more details at: https://youtu.be/sxxbx4ZJBcU Attached files are the: - Printable power pack plate…
I wanted to try something different and modeled a Wheatley Vodka stand with stirrer holder! I did use the Polymaker Matte PLA Filament Army Blue 1.75mm 1kg 3D Printing Filament, PolyTerra 3D Printer PLA Filament. The blue is almost dead…
Maker Chip Blank Inspired by https://numakers.com filament spool. 3MF file with multiple parts for easy color change. Designed to print on a multi color printer with 0.25 nozzle but results may vary. Adjust purging volumes depending on…
UNOFFICIAL FAN ART. This is an independent, non-commercial fan-made tribute to retro console gaming hardware. It is not affiliated with, endorsed by or sponsored by Nintendo. All related trademarks and designs belong to their respective…
Unofficial dimensional reference model for the Rigol RP3500A oscilloscope probe. This is intended for designing holders, trays, Gridfinity inserts, scope accessories, and other bench tooling around the RP3500A probe. This is a…
this model was inspired by a commercial I saw but nobody was printing it... probably because of micro plastics
Dual Hardness Buckle Tongue for CYBEX Balis S Lux Replacement buckle tongue designed for CYBEX Balios S Lux stroller harness systems. This model is designed to secure the buckle to the stroller handle while providing a durable and…
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
![[unofficial] LowRider v4 DIY CNC - for use with Unistrut / Superstrut / metal strut - table extenders, rail clips, and rail placement jig v1.0](https://media.printables.com/media/prints/1178649/images/8868018_3e4f06c2-c883-4012-9e58-fbac3acf33a3_d3c9d2f1-d15d-488f-bb0a-152d6677cd7c/img_0275-with-labels-retouched.jpeg)
![[Unofficial] LowRider 4 CNC: HIDDEN BELTS MOD - Hide/protect wheel side Y axis belt inside metal strut / unistrut / superstrut (v2.0)](https://media.printables.com/media/prints/97726131-54d3-4c7f-8d88-df078e9d92b1/images/11199823_68101f7e-ae67-4dbd-a53c-ee1f50b1932f_b9bd98fe-c9d5-47d8-ad87-130da7fffe7c/01.jpeg)
![Now for 32mm tubes - [unofficial] LowRider v4 DIY CNC - for use with Unistrut / Superstrut / metal strut - table extenders, rail clips, and rail placement jig v1.0](https://media.printables.com/media/prints/1216751/images/9130470_1760b9a1-f78a-4636-b5a1-a896a5953a1f_91313862-e5a6-4c8f-9f7d-795777348020/img_0275-with-labels-retouched-now-for-32mm.jpg)
![[Unofficial] LowRider v4 dust shoe modified to: allow two-wrench method of tool change AND work with Kobalt router (maybe also Makita)](https://media.printables.com/media/prints/643d038b-76b4-40b3-9330-7f955d3ceb6d/images/10616326_bbc2a22c-f105-4307-82c0-fcbe57513ffd_f5bb75a9-49a1-4677-addc-a44f62d30f5f/img_9430.jpeg)
![[Unofficial] LowRider v4 DIY CNC - Y_Clip_29.5_ Min and Max Placement Jig - for 2''x3'' alum rectangle tubing (instead of for Unistrut)](https://media.printables.com/media/prints/0acae947-19ab-41e4-83e1-39ac062adc5b/images/10750263_68111e89-24b6-4d5f-b9f7-db346775b00e_7eb0b285-e3e8-4beb-bbef-f22509508358/lowrider-v4-diy-cnc-y_clip_295_-min-and-max-placement-jig-for-2x3-alum-rectangle-tubing-instead-of-for-u_pRpIkhB.jpg)
