Counting matching models…
Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
This was made for an older acquaintance of mine who has arthritis and finds it difficult to unscrew a Coke plastic bottle cap. These 30mm (~1.18") bottle caps are common, so this wrench should work on other brands as well. Print…
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
A compact and functional holder for hex keys, optimized for the most common sizes: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 mm. Each slot is clearly marked with the corresponding size, so you can quickly grab the right tool. Perfect for the…
Find 3D-Printed RC cars here.
This is not exactly NASA wrench, but it is also easy to print and you can use it in so many different ways (see complete video below :) If you print this thing, I will be happy to see your make in "Post a make". Print Settings Printer…
Model Info | Introduction I want to introduce you to an easy-to-print tool / wrench/ key for two sizes of aerator taps :) Use 5 perimeters for a really strong tool - I had no problem with PLA and tight fit. If you chose the wrong size: no…
Leisure Suit Larry. Lawernce Laffer.
Needed some words on it to be compliant at work.
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…
I needed a tap wrench which could stand up to the forces of tapping into aluminum rather than plastic. This design isn't perfect but holds up quite well for tapping into extrusion brackets and should fit taps of around M6 and below…
Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
Took the concept of jgremlin's design and remixed it to better fit the dimensions of my wrenches. Metric Version.
This is a small adapter for (nominal) 9 mm square drive latches with handles or as a socket adapter. Key features: for 9 mm square drive latches e.g. used in transportation and various other applications on the other side both variants…
Took the concept of jgremlin's design and remixed so they would fit my wrenches. The largest 4 of my wrenches didn't fit in his model, so I re-did the pockets by measuring each wrench and applying the same tolerances on each. Fitment may…
Requires: 1x Wrench or tool of your choosing 1x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 1x Screw This! single inserts: https://www.printables.com/model/522781-screw-this-single-insert
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…
Update: The wrench now tapers, making it easier to use with a sock. Internal geometry adjusted for better results. Over time we often get crud on our nozzles, which makes it very difficult to use most nozzle wrenches as they won't slip…
Bearing filament spool mount for Prusa Mk3s. I hate the swinging of the filament spools on top of the standard mount from Prusa. This mount has a bearing mounted roller where the spool rests using cheap skateboard or rollerblade bearings…
this printable nozzle changing adapter eliminates the need for any tools or hardware to change the nozzles. It is designed to go with the Nozzle torque wrench from @G_design , but should work with any tool, that uses hex bits. It is…
Small wrench to tighten the switch nuts on FrSky Transmitters. Wire used is 0.03 music wire. I had to clean out the holes with a drill slightly smaller than the wire, then pressed them into the holes. For the print, I used 0.30 layer…
The user manual for the Primal Rights Competition Primer Seater (CPS) says not to use tools to tighten the shell plate holder screws — finger tight only! In practice, I've found “finger tight” to be barely sufficient. While it's…
Keep your Biltema wrenches organized and accessible with this custom-designed Gridfinity wrench holder. Designed to fit the Art. 10-500 and Art. 10-584 wrench sets (7 mm and 8–19 mm), this tray holds 13 wrenches securely in a 6 x5…
Tool to tighten/loosen ring securing cartridge in a Moen Sense faucet. Mine kept loosening up and I was trying to turn in the ring with a screwdriver which didn't work so well so I designed this. Hope it helps. Hex grip for hand…
This is a costume wrench for unscrewing of the cap that keeps on the handle bars on ROG pony. It works but must be printed from good materials because the little pins can break off when you try to screw it down. PLA is not good enough !!!
I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…
Just a wrench for the hex plastic nuts inside the water tank.
Nach 12 Jahren begann die Lambdasonde meines Pellet Kessels von Buderus im Betrieb davonzudriften, sie meldete während des Brennprozesses Werte von 12% bis 19% Sauerstoff, statt der geforderten 6%. Ich orderte die Original Bosch/Buderus…
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…
GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…
This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer. Now, i am not talking about a "print-several-pieces-and-then-assemble" version…
ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…
Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…
Gridfinity Wrench Holders designed to hold full sets of Metric and SAE Wrenches. The metric wrenches are inversed to fit into a standard tool drawer. Mirror the files to get both sides. Printed in PLA+ Nozzle 0.4 Height 0.2 Infill 15%
Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…
My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
This is the Wrench Rack! This is by far the best and easiest way I've found to organize combination wrenches in your toolbox. These are all just variations on a similar theme.
Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…
Simple 2 piece holder for up to 8 wrenches, in my case for 6 - 22mm. There are 2 models, each with different hook position - offset by 20mm. This means you can put them in any column of holes on the Skadis board, depending on lenght of…
A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
Wrench holders slide together. I included pieces with 3 peaks and 1 peak if you need different lengths. There are also front and back pieces that only have the attachment points on one side. The magnets I used were 10x3mm magnets from…
Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.
Another basic tool organizer. Works great for deburring tools, small wrenches, screw drivers, glue sticks. You name it. The 200x100 size fits well in a lot of standard Kennedy, Craftsman, and other tool boxes. I printed mine in PLA. Any…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…
Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
Introducing “The Lamprey”, a soda-bottle-cap-opening wrench! Originally made as an accessibility aid for people with arthritis or other grip issues. The design affords three hand positions - right up by the cap, in the middle of the…
Hi Rachel, you inspired me to take another look at this armour. There is still a bit to tidy up, but I thought I'd chuck it up here for your feed back. If you do take it on as always, check the sizing suits your needs and do post some…
Allen wrench holder with some improvements: Will not wear out, holds hex keys in with an o-ring, not tension in the plastic All Allen wrenches equally accessible 3D printable Uses a standard o-ring available at most any hardware stores…
A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…
Threading Tool Handle A handy tool for cut and recut threads. It should fit square shaft from M2-M10 thread cutter (most inch thread as well). The square shank holders are graduated 0.5mm in one single tool. Insert 2,5-4,5mm square shaft…
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
I couldn't find a simple adjustable plier and wrench organizer so I designed this. It is very versatile and works well with most tool box drawers. The parts are simple and print very quickly. The height of the dividers can be scaled as…
Metric Wrench holder for 6mm - 15mm wrenches. Version with raised letters - to colour with a pen or print with a different colour. Version without letter - you can write your own letters/numbers/symbols. Base size of holder - 40x230mm…
At work we use allen wrenches (hex keys) a lot for machine assembly. The problem is people keep borrowing my allen wrench sets as we work on machines together. My work provides bulk bondhus allen keys to people so they don't use worn out…
Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.
I have tried a few designs of allen key handles and many of them try to be as generic as possible, resulting in the tool being loose in the handle. I've tightened up the gap for the allen key. I have also reduced the number of 3d printed…
For assembling all the small parts one gets when 3D printing, a little wrench which can be used for M3 sized nuts.
I made it out of TPU as a joke but it is functional when made with a solid material! *This is not an original model, it is a remix of a model published on another website by 3DPrinted *
I designed a combination wrench holder after struggling to find one I liked. This is based on a generic wrench holder that gradually increased in wrench size and depth. I used a 3x5 Gridfinity base for the 13 wrench holder and a 3x4 for…
This isn't the first 3D-printed object made in space, but it is the first created to meet the needs of an astronaut. When International Space Station Commander Barry Wilmore needed a wrench, NASA knew just what to do. They "e-mailed" him…
Holder for 12 wrenches for ikea skadis system.
Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…
This is a complete Metric Hex Key Set Holder designed for Multiboard using the SlideCleat for Multiboard Connector . For installation you'll need to thread two SlideCleat Connectors into your multiboard tiles and simply slide this Hex Key…
NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25…
It's a simple tool to help fine-tune the bed leveling.
Hammer needs supports to print
use with blank insert_hollow from the original HSW board 8 slots for max size 6mm, hole diameters: 7,7,5,5,5,3,3,3mm Check out my collection of HSW attachments here :) Printing instructions: no supports, print flat on surface use 4…
SMA is one of the most common coaxial RF connectors and I happen to use them all the time. The wrench dimension is 5/16", which is almost 8mm. The spec usually calls for 4 to 8 in-lbs of torque for these connectors, which is about as…
Intro If you're cursed enough to live in North America, you need two wrench sets. I like the ideas of having both sets arranged in some kind of symmetrical fashion on my wall as in the picture (therefore resulting on asymmetric holders).…
Metric wrench holder for Craftsman wrenches from 6 mm to 17 mm. The holder screws into a French cleat (or other holder) with two screws. The recessed lettering in the pictured print was filled with yellow fingernail polish. I used a 0.15…
This is a high quality wrench to help take off en-fit connectors. It's been carefully sized and tested on Infinity pump sets and Farrell sets.
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…
Summary: Allen Wrench, Allen Key, Hex Wrench, Hex Key…. Whatever you call them, these are the T-Handles for them. The following sizes are available: Metric: 1.5mm 2mm 2.5mm 3mm 4mm 4.5mm 5mm 5.5mm 6mm 7mm 8mm 10mm SAE: 0.050" 1/16" 5/64"…
If you like this model and use it please upload a like, it really helps others find it! I wanted to have my pliers up on edge so they could better fit in my toolbox, and after looking at commercial options such as…
