3293 modeli
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…
GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…
This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer. Now, i am not talking about a "print-several-pieces-and-then-assemble" version…
ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…
Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…
Gridfinity Wrench Holders designed to hold full sets of Metric and SAE Wrenches. The metric wrenches are inversed to fit into a standard tool drawer. Mirror the files to get both sides. Printed in PLA+ Nozzle 0.4 Height 0.2 Infill 15%
Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…
My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
This is the Wrench Rack! This is by far the best and easiest way I've found to organize combination wrenches in your toolbox. These are all just variations on a similar theme.
Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…
Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…
Simple 2 piece holder for up to 8 wrenches, in my case for 6 - 22mm. There are 2 models, each with different hook position - offset by 20mm. This means you can put them in any column of holes on the Skadis board, depending on lenght of…
A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
Wrench holders slide together. I included pieces with 3 peaks and 1 peak if you need different lengths. There are also front and back pieces that only have the attachment points on one side. The magnets I used were 10x3mm magnets from…
Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.
Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.
Another basic tool organizer. Works great for deburring tools, small wrenches, screw drivers, glue sticks. You name it. The 200x100 size fits well in a lot of standard Kennedy, Craftsman, and other tool boxes. I printed mine in PLA. Any…
Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…
Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…
Introducing “The Lamprey”, a soda-bottle-cap-opening wrench! Originally made as an accessibility aid for people with arthritis or other grip issues. The design affords three hand positions - right up by the cap, in the middle of the…
Hi Rachel, you inspired me to take another look at this armour. There is still a bit to tidy up, but I thought I'd chuck it up here for your feed back. If you do take it on as always, check the sizing suits your needs and do post some…
Allen wrench holder with some improvements: Will not wear out, holds hex keys in with an o-ring, not tension in the plastic All Allen wrenches equally accessible 3D printable Uses a standard o-ring available at most any hardware stores…
A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…
Threading Tool Handle A handy tool for cut and recut threads. It should fit square shaft from M2-M10 thread cutter (most inch thread as well). The square shank holders are graduated 0.5mm in one single tool. Insert 2,5-4,5mm square shaft…
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
I couldn't find a simple adjustable plier and wrench organizer so I designed this. It is very versatile and works well with most tool box drawers. The parts are simple and print very quickly. The height of the dividers can be scaled as…
Metric Wrench holder for 6mm - 15mm wrenches. Version with raised letters - to colour with a pen or print with a different colour. Version without letter - you can write your own letters/numbers/symbols. Base size of holder - 40x230mm…
At work we use allen wrenches (hex keys) a lot for machine assembly. The problem is people keep borrowing my allen wrench sets as we work on machines together. My work provides bulk bondhus allen keys to people so they don't use worn out…
Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.
I have tried a few designs of allen key handles and many of them try to be as generic as possible, resulting in the tool being loose in the handle. I've tightened up the gap for the allen key. I have also reduced the number of 3d printed…
For assembling all the small parts one gets when 3D printing, a little wrench which can be used for M3 sized nuts.
I made it out of TPU as a joke but it is functional when made with a solid material! *This is not an original model, it is a remix of a model published on another website by 3DPrinted *
I designed a combination wrench holder after struggling to find one I liked. This is based on a generic wrench holder that gradually increased in wrench size and depth. I used a 3x5 Gridfinity base for the 13 wrench holder and a 3x4 for…
This isn't the first 3D-printed object made in space, but it is the first created to meet the needs of an astronaut. When International Space Station Commander Barry Wilmore needed a wrench, NASA knew just what to do. They "e-mailed" him…
Holder for 12 wrenches for ikea skadis system.
Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…
This is a complete Metric Hex Key Set Holder designed for Multiboard using the SlideCleat for Multiboard Connector . For installation you'll need to thread two SlideCleat Connectors into your multiboard tiles and simply slide this Hex Key…
NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25…
It's a simple tool to help fine-tune the bed leveling.
Hammer needs supports to print
use with blank insert_hollow from the original HSW board 8 slots for max size 6mm, hole diameters: 7,7,5,5,5,3,3,3mm Check out my collection of HSW attachments here :) Printing instructions: no supports, print flat on surface use 4…
SMA is one of the most common coaxial RF connectors and I happen to use them all the time. The wrench dimension is 5/16", which is almost 8mm. The spec usually calls for 4 to 8 in-lbs of torque for these connectors, which is about as…
Intro If you're cursed enough to live in North America, you need two wrench sets. I like the ideas of having both sets arranged in some kind of symmetrical fashion on my wall as in the picture (therefore resulting on asymmetric holders).…
Metric wrench holder for Craftsman wrenches from 6 mm to 17 mm. The holder screws into a French cleat (or other holder) with two screws. The recessed lettering in the pictured print was filled with yellow fingernail polish. I used a 0.15…
This is a high quality wrench to help take off en-fit connectors. It's been carefully sized and tested on Infinity pump sets and Farrell sets.
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…
Summary: Allen Wrench, Allen Key, Hex Wrench, Hex Key…. Whatever you call them, these are the T-Handles for them. The following sizes are available: Metric: 1.5mm 2mm 2.5mm 3mm 4mm 4.5mm 5mm 5.5mm 6mm 7mm 8mm 10mm SAE: 0.050" 1/16" 5/64"…
If you like this model and use it please upload a like, it really helps others find it! I wanted to have my pliers up on edge so they could better fit in my toolbox, and after looking at commercial options such as…
A simple modular tool organizer for any toolbox. Dividers clip onto 1/4" steel rods (or something similar). The design includes blank dividers and interchangeable labeled dividers. The labels and clip are designed to be printed on a…
Set of wrenches/spanners with the sizes: 6 - 7 8 - 9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 Print settings: Layer: 0.25mm Draft or 0.28mm Superdraft Infill: 25% Nozzle: 0.4mm Filament: Esun PLA+ (PETG should work as well)…
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Tekton Metric & SAE Wrenches Metric: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 https://www.amazon.com/dp/B00OXUPFDU 6mm x 2mm magnets…
Simple printing, doesn't need many settings, I just used 0.2 layer height. I also used an ironing on the top to make the finish better.
This was my first attempt at a helmet. I made it for my daughters' Halloween costume, because I wasn't happy with the designs I could find (including paid designs) and we really wanted a working sight with blinky lights. I've included a…
Hi Everybody I designed a removable handle for dremel wrench. In order to make it identical, easy to see arround and not to loose it. I added logo. For printing logo i attached every file you may need. Also, There 2 each different body i…
Sometimes it is hard to find the right fastener for your project, so here's a kit for you! This kit contains hex head metric bolts, nuts, washers for M5, M6, M8, M10, M12 and M16! Not only you can print some fasteners for your projects,…
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
This is a simple mashup of Jimson's simple Human Skull and Armin's Wrench fused in PrusaSlicer. All credit goes to the original modelers. Please respect their licensing restrictions. I use it as a fun "under construction/under repair/do…
My IKEA faucet aerators needed to be cleaned and I could not get them open so I remixed two designs into a better one. Both designs were much too fragile so I strengthened them as much as possible given the tolerences of the aerator. That…
The perfect piece for the workshop to keep everything neatly organized. I recommend 3 perimeters, 6 top and bottom layer at a layer height of 0.2 mm and 15% Gyorid infill. Feel free to check out all my little gadgets for the workshop.
Cut out some of the material and still dont have to use supports if you lay it down, also made a 249.5mm version Print instructions Category: Tool Holders & Boxes Summary Cut out some of the material and still dont have to use supports if…
There is a small torx screw in the adjusting nut that needs to be removed first. In my case the screw was hiding in the back of the nut so I had to use a bit of force to loosen the nut so the screw would show up. I printed it with 4…
I wasn't satisfied with any of the cresent wrench holders that were out there and wanted to make one of my own for the multiboard and also have it screw in instead of a snap. I want to always keep my designs free for anyone who wants to…
Several designs of a shut-off valve for medicinal oxygen tanks or any tank with a similar mechanism. You can leave them attached to the tank for a semi-permanent shutoff mechanism.
This is a fully customizable wrench organizer. I have included a Fusion 360 file that includes parameters to adjust the number of slots and the width of each end.
I found that "Tymbo13's" holder, remixed by "Jvince" was the best wrench holder out there for my needs. Jvince's added the white lettering, which is really useful, and looks great. However, I (unfortunately) don't own an Prusa MM 2. I…
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
holds the 5 hex wrenches that come with the ender 3 s1 pro Print Settings Rafts: No Supports: No Infill: 10%
Oil filter wrench for many Peugeot, Citroën and some others. Has a ½" square drive for your ratchet. Tested to withstand a torque of 70 Nm and having only minor deformation in the ½" square as a result. Since the clearance on the ½" drive…
Includes SAE and Metric files. Also a painted 3MF for Bambu Studio
HSW mount for adjustable crescent wrench. There are other models out there ( like this one ), but they (a) print with the vanes standing vertically which makes them weak, and (b) use a screw, leaving the model free to rotate when mounted.…
Simple edit where I removed the walls and made the base more compact for a non-stackable low profile wrench holder that takes less space than the original model. Printed two of each model for the complete wrench set.
This isn't the first 3D-printed object made in space, but it is the first created to meet the needs of an astronaut. When International Space Station Commander Barry Wilmore needed a wrench, NASA knew just what to do. They "e-mailed" him…
The printable wrench for the bed leveling nuts is quite loose, and the nuts themselves are pretty tight. I made a newer version that tapers slightly, gripping the nuts much better. I printed this in PLA and it holds up well, unlike the…
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Show off your Wiha metric allen key set (or any metric allen wrenches, really!) with this honeycomb wall mod which stores a full set of nine metric allen / hex keys. Slots for 10, 8, 6, 5, 4, 3, 2.5, 2, and 1.5mm allen wrench keys.…
Since making my first toolholder collection I have extended my library a bit, so here is a Gridfinity tool holder collection with the additional trays. All trays have a height of 4 units and are not stackable . (You may put them on top,…
Wall mount for a set of 13 wrenches. It fits combination wrenches from 6 mm to 22 mm, for example. The dimensions are approx. 240 mm x 140 mm with a wall thickness of 3 mm. The holes are made for 3.5 mm Spax countersunk screws. I printed…
A wall mount for eight wrenches. I printed it in PLA with 15% infill, 2 shells and 0.25mm layer height with a 0.4mm nozzle. Sturdy enough.
Simple workable print. Will print in 3 pieces and easily assemble. Not sure of any practical uses, but would work great as a base for steampunk or other cosplay. Also just a simple toy to hang up or show off.
I just installed the Nylock bed leveling mod on my MK3S and wanted to take the guesswork out of turning the bed screws in accordance with directions from the Prusa Leveling Guide in Octoprint. Each mark on the protractor is 5 degrees, and…
I only made it for the models i have home if you have different sizes i will edit the model and add your size. Current size: D38 mm (20mm pipe) D43 mm (20 mm pipe)
Replacement bung for 210L/55 gallon poly barrels that have a coarse buttress type thread, not NPT fine thread. The OD of the bung cap thread is approx 56mm. Included in model is a bung cap with/without hole for 1/2" OD hose, and hand…
