P
PrintablesJaMi
Screw M3x25
Screw M3x25, thread pitch 0,5. Screw head - Allen. Printing without supports.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
- Downloads
- 755
- Likes
- 19
- Rating
- 1
Search results: x25
478 models
P
Printablesddded
HSW 10x10 cells wall compatible with 210x250 mm print size printers
UPDATE 04.08.2023: Added print file for PLA, 0.3 mm layer. UPDATE 31.07.2023: Added print file for PETG, 0.3 mm layer. Print time decreased to about 5 hours. UPDATE 25.07.2023: New model printed and seems all is fine, check photos. On…
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 425
- Likes
- 45
- Rating
- 5
P
PrintablesAKIINT
Maze 25x25
To solve a maze is a great time for relaxation, concentration, perfect for childrens and adults. Large numbers of rooms, difficult orientation and the charm of finding the way out creates a pleasant experience. I want to share with you my…
Print approx. €15.89–€19.43 excl. taxPreliminary estimate for one variant
- Downloads
- 346
- Likes
- 40
- Rating
- 5
P
PrintablesTae
Small Sanding Block M4x25mm
Remix of the original Small Sanding Block that uses M4x20mm screws. This version requires M4x25mm screws so it is a bit higher (duh). Knob and Cap are unchanged in this remix. For detailed description please refer to the original model.…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 275
- Likes
- 61
- Rating
- 4
P
Printablesmstejska
Simple stackable box 50x50x25 - and other sizes
Printed with PLA and PETG
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
- Downloads
- 243
- Likes
- 28
- Rating
- 0
P
Printablesmkosiedowski
Bolt for the filament cutter 45° (instead of M3x25 screw)
This saves you a trip to a hardware store and few cents on the M3x25 screw ;) I really liked the design of the filament cutter, but it required two M3x25 screws which I did not have. These screws were also unavailable in the nearest…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
- Downloads
- 220
- Likes
- 27
- Rating
- 5
P
PrintablesDenBéire-BD
Ram Mount M6x25mm
Needed a ballpoint mount for my ram mount GPS holder for m6 bolt and a specific height (to get over my dashboard) The height of the sleeve (until the ballpoint) is 20 mm and the bolt head is another 5 mm up in the ball point. I made an…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant
- Downloads
- 181
- Likes
- 30
- Rating
- 5
P
PrintablesDanAndersen
60x25mm Fan Mod for Cheng Liang P360W24V Powersupply - TwoTrees Sapphire SP3
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
- Downloads
- 149
- Likes
- 18
- Rating
- 5
P
Printableskoselja
Multicolor Rugged ammo box 7.62x25 Tokarev
Tiskněte v měřítku 10% K sestavení je potřeba 6ks šroubků M3x20. Víko, těsnění a klapky jsou z původního modelu kompatibilní.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
- Downloads
- 141
- Likes
- 17
- Rating
- 0
P
PrintablesDeniz
Noctua NF A6x25 Lüfter halterung (60mm)
Diese Halterung kann einen kleinen Noctua 60mm Lüfter aufrecht stehen lassen ohne dass dieser Gefahr läuft ständig umzukippen, da die Halterung an die Oberfläche geschraubt werden kann. Um den Lüfter zu fixieren kann man m4x40 Schrauben…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
- Downloads
- 139
- Likes
- 5
- Rating
- 0
P
PrintablesSethR1223
Organizer - 160mmx75mmx25mm - 10 Sections w/ Snapping Lids
I've done it, everyone! I've reinvented the wheel! But seriously, this is just a simple model with a straight-forward design that seems to work well for my purposes, even if it's something I could have downloaded from dozens of…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 74
- Likes
- 13
- Rating
- 5
P
PrintablesFazal Majid
Lens caps for the Zeiss Victory Pocket 8x25 binoculars
Objective and eyepiece covers for the Zeiss Victory Pocket 8x25 binoculars. Print instructions Use PETG at the 0.10mm Detail setting, rotate 45º so the lines are parallel to the lens axis.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 62
- Likes
- 3
- Rating
- 5
P
PrintablesAinon3Dtisk
Optic/scope elevation 20x25mm for Airosft, BB gun
Hello, Today I have for you the Optics/Rifle Scope Elevation 20x25 v2 profile. It is used to elevate optics, rifle scopes for Airsoft, paintball or other replica weapons. It holds nicely on a RIS sheet with a width of 21-22mm. I used…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printableskunaa
M3 hex screw and nut (M3x10, M3x15, M3x20, M3x25, M3x30)
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Downloads
- 9,761
- Likes
- 386
- Rating
- 4.45
P
Printableskunaa
M4 hex screw and nut (M4x10, M4x15, M4x20, M4x25, M4x30)
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Downloads
- 4,440
- Likes
- 142
- Rating
- 4.67
P
Printableskunaa
M5 hex screw and nut (M5x10, M5x15, M5x20, M5x25)
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Downloads
- 3,266
- Likes
- 112
- Rating
- 4
P
Printableskunaa
M6 hex screw and nut (M6x10, M6x15, M6x20, M6x25, M6x30)
nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Downloads
- 2,243
- Likes
- 106
- Rating
- 5
P
PrintablesNoctua_at
NA-IS1-12 Inlet Spacer for Noctua 120x25mm fans
The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
- Downloads
- 1,732
- Likes
- 291
- Rating
- 5
P
PrintablesYimmyTedeski
cable chain 20x25
Customized version of http://www.thingiverse.com/thing:1078216 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1078216 Instructions Using the following options: height = 20 width = 25 Type = 2 Round = 1…
- Downloads
- 1,224
- Likes
- 78
- Rating
- 0
P
PrintablesNoctua_at
NA-IS1-14 Inlet Spacer for Noctua 140x25mm fans
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
- Downloads
- 1,056
- Likes
- 121
- Rating
- 5
P
PrintablesReDevil75
1st layer test. Sizes 50x50 100x100 150x150 200x200 230x230 250x250
1st layer test by 0.2 layer height
- Downloads
- 1,054
- Likes
- 7
- Rating
- 5
P
PrintablesAlex
SpeedyBee Mario 5 GPS Mount for 25x25mm GPS module BZ-251
This remixed part provides a mounting for 25x25 mm BZ-251 GPS module on a SpeedyBee Mario 5 frame. As I don't own such GPS, please let me know if it fits.
- Downloads
- 885
- Likes
- 36
- Rating
- 0
P
PrintablesThe Real Phoenix
Playstation 2 Quiet Fan Mod - compatible with fans from 50x10mm to 60x25mm (Noctua)
Edit from April 24th 2023 Per request, I've added holes which “ should” work with SCPH-3000x I don't have any other model on hands than my 39000 so do it at your own risk. I'm keeping the old ones working on 39000 for now.…
- Downloads
- 878
- Likes
- 88
- Rating
- 5
P
PrintablesNairod
6025 NF-A6x25 5V PWM Noctua Fan Holder for Control Board for Bambu Lab X1 X1C P1P
6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)
- Downloads
- 863
- Likes
- 278
- Rating
- 4.85
P
PrintablesJohn Parks
Elegoo Centauri Carbon Printhead Fan Grille (Noctua NF-A12x25 fan grille)
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
- Downloads
- 834
- Likes
- 120
- Rating
- 4.85
P
PrintablesDJ
Andromeda Ascendant in XXXL Format (LxHxW: 50x21x25cm) (Gene Roddenberry) with stand
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
- Downloads
- 744
- Likes
- 56
- Rating
- 0
P
PrintablesCrambambuli
Voron V2.4 Side skirt mod for noctua Fan NF-A6x25
This is a mod for my Voron 2.4 Category: 3D Printer Parts
- Downloads
- 642
- Likes
- 111
- Rating
- 4.55
P
PrintablesscaryPug
Ender 3 V2 / Pro motherboard cover for 80X25mm fan (no support)
This is a remix of 'Ender 3 V2 & Pro Silent Motherboard' by TerraVestra Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This cover houses 80x25mm fan. An lm2596 mount with screw added, please make sure your lm2596 fits in this…
- Downloads
- 510
- Likes
- 107
- Rating
- 4.91
P
PrintablesJason Boi
Hotwheels Sannahed Display Insert 25x25
Hotwheels x IKEA x 3D printer. Introducing the Hotwheels Sannahed 25x25 Insert display solutions. All you need to do is print 6x. This will fit snugly into the frame and you can display 24 cars. Most of my HW collections are the shorter…
- Downloads
- 458
- Likes
- 51
- Rating
- 5
P
PrintablesJamzy
Jonsbo N4 - Slim Front Fan Adaptor & 120x25mm fan version
Large bed only. (6/2/2025): added 25mm height fan model Print with support.
- Downloads
- 421
- Likes
- 17
- Rating
- 0
P
Printablesrace85com
Wall Corner Protector Trim 150x25mm
DImensions: 150mm long, 25mm sides, 1mm depth internal radius 2mm Printing instructions: any material, PLA will hold just fine print orientation as shown in pics layer height max 0.28 no supports, no brim needed Installation: use glue gun…
- Downloads
- 412
- Likes
- 45
- Rating
- 5
P
PrintablesOuliere
Box 113x95x25.5 mm (for lures)
Box 113x95x25.5 mm (for lures)
- Downloads
- 376
- Likes
- 30
- Rating
- 0
P
PrintablesToni H
FormD T1 2.1 - 120mm Noctua NF-A12x25 PWM Fan Duct
Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…
- Downloads
- 354
- Likes
- 34
- Rating
- 0
P
PrintablesBasementLAB
Wall Grid Cover "Honeycomb Design" 120x120mm / 150x256mm / 150x236mm / Ø120mm
Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…
- Downloads
- 344
- Likes
- 50
- Rating
- 5
P
PrintablesNerlin
Multiboard Storage System Flex Plate Holder for 6 Bambu 256x256 Plates
A plate holder for six 256x256 plates for Bambu Labs printers for the Multiboard Storage System. Standard Multiboard settings, no supports. https://www.multiboard.io/
- Downloads
- 343
- Likes
- 68
- Rating
- 5
P
PrintablesFridi
Mounting bracket 3 sides-40x40x25x5
Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill
- Downloads
- 338
- Likes
- 129
- Rating
- 0
P
PrintablesToneDreams
120/140mm Fan Spacer Optimized for High Airflow (like the NF-A12x25)
This spacer is designed to maximize airflow with minimal noise impact, almost no added noise compared to running the fan unrestricted. I recommend using at least the 20mm version to ensure enough clearance for optimal airflow. 120mm: •…
- Downloads
- 335
- Likes
- 42
- Rating
- 5
P
Printablesmachinekoder
HEPA Filter H12/H13 (FC8038/01, 150x120x25mm) + Activated Carbon Filter Housing for 120mm Fan
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
- Downloads
- 324
- Likes
- 58
- Rating
- 5
P
PrintablesJustFun2772
NAS R1 R7 Topton Aoostar Kingnovy riser for 92x92x25mm and-or 120x120x25mm fans
Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…
- Downloads
- 302
- Likes
- 18
- Rating
- 0
P
Printablesmobiobi
XJ99C Noctua NF-A12x25 Mod
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
- Downloads
- 297
- Likes
- 48
- Rating
- 5
P
Printablesdjos_1475
Noctua A12x25 Model - Fan Show Down Edition
Model of the Noctua A12x25 Model for folk wanting to enter the Major Hardware Fan Show Down. STL, STEP and F3D files are included.
- Downloads
- 293
- Likes
- 24
- Rating
- 0
P
Printableskoselja
Rugged ammo box 7.62x25 Tokarev
K sestavení je potřeba 6ks šroubků M3x20. Víko, těsnění a klapky jsou z původního modelu kompatibilní.
- Downloads
- 292
- Likes
- 52
- Rating
- 5
P
PrintablesRandy
Cinelog30 v3 GPS 25x25x8.2
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
- Downloads
- 282
- Likes
- 11
- Rating
- 5
P
PrintablesDragodast
Skoda Octavia 1 cup holder for 1x500ml, 1x250ml + vape
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
- Downloads
- 276
- Likes
- 19
- Rating
- 5
P
Printablesis-serp
7.62x25mm Tokarev
The 7.62x25mm Tokarev cartridge is a Russian rimless bottlenecked pistol cartridge that was widely used in former Soviet states. It is based on the 7.63x25mm Mauser Cartridge.
- Downloads
- 259
- Likes
- 19
- Rating
- 0
P
PrintablesChad Baker
Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
- Downloads
- 258
- Likes
- 32
- Rating
- 5
P
Printables1REK
Cube calibration 25X25X25
Print & fan Print instructions Category: 3D Printing Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.1 Infill: 20
- Downloads
- 256
- Likes
- 4
- Rating
- 4
P
PrintablesHendrick
LEGO Compatible Build Plates from 2x2 to 25x25
2024-08-15 Updated to new version. V2 in files Tried to create more surface touch points ( bed adhesion ) and filled the lower circle. I have adjusted to print with a .10 layer height as I only had one layer between bottom and start of…
- Downloads
- 249
- Likes
- 11
- Rating
- 0
P
PrintablesTechMudjin
M5x25 Bolt
Print with 100% infill and use PLA for maximum strength. Objects printed vertically are stronger than horizontal ones, but using support messes up the threads.
- Downloads
- 242
- Likes
- 10
- Rating
- 0
P
Printableshgross
Noctua NF-A12x25 Cover for single 120 mm fan and 360 mm Alphacool NexXxoS ST 30 radiator
These covers can be used to make the beige Noctua-AF12x25 fans blend better into a custom pc build. There are versions for a single fan a full cover for radiators using 120 mm fans - the design is modular a front cover for radiators using…
- Downloads
- 237
- Likes
- 35
- Rating
- 4
P
PrintablesFancy Mustard Jar
Noctua NF-A12x25 Fan
Leave a comment if you'd like another file type for this model.
- Downloads
- 232
- Likes
- 20
- Rating
- 0
P
PrintablesAl
Snaplock 10mm Ammo Box (130x130x25)
I used PLA+ and printed the insert with 2 walls and 10% infill to speed the process up, should be around 4 hours. Insert should be printed face down to prevent need for supports. For the box and clip I used PETG and increased the infill…
- Downloads
- 227
- Likes
- 19
- Rating
- 5
P
Printablesmorf
FC adapter mount 25.5x25.5 to frame 20x20, M2, angle 45deg
This is simple yet useful adapter when your frame has 20x20mm mount holes but the FC is 25.5x25.5. Fits M2 screws and screw heads are hidden so when mounted everything is flat.
- Downloads
- 226
- Likes
- 6
- Rating
- 5
P
PrintablesRaptorHunter
Computer axial fan to blower fan 80mmx25mm
Use this to convert a 80mm axial fan to a blower fan, you need to break the blades and sand the original fan to convert.
- Downloads
- 225
- Likes
- 38
- Rating
- 5
P
PrintablesAlexandre
Bambu Lab P1P/P1S/X1 motherboard 60mm fan holder 6025 NF-A6x25
Reduced the number of fan mounting points and lowered the fan position to better make us of the back panel opening. For a 60x25mm (6025) fan, I used the Notura NF-A6x25 PWN 4 wire (don't use the Low Noise Adaptor as the fan sometimes does…
- Downloads
- 223
- Likes
- 60
- Rating
- 5
P
PrintablesvagueDirector
20x20mm to 25.4x25.4mm adaptor for whoop flight controller stack mounting
Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to mount a happymodel diamond dvr vtx to a 20x20 mount. Holes should be tight enough for the screws to bite, so nuts…
- Downloads
- 222
- Likes
- 10
- Rating
- 0
P
PrintablesLordDeno
HSW Holder 25x25mm
Honeycomb storage wall holder 25x25mm, to be used with a hallow insert for the honeycomb wall. No supports needed.
- Downloads
- 222
- Likes
- 42
- Rating
- 4.8
P
PrintablesDonJakobo
30x30 to 25x25 adapter
I remixed another mount on thingiverse and adapted this for my needs, removing extra plastic because I wanted simple and slim design to add on an HD-zero whoop 25x25 board onto a 30x30 flight controller stack. Printed this in PLA+ 0.2…
- Downloads
- 211
- Likes
- 6
- Rating
- 0
P
PrintablesJan
Fujitsu Primergy rx2540 (m4) 2,5'' HDD Caddy
2.5'' SSD/HDD insert for serves like the Fujitsu Primergy rx2540
- Downloads
- 207
- Likes
- 8
- Rating
- 5
P
PrintablesYaqu13
- Downloads
- 205
- Likes
- 32
- Rating
- 5
P
Printablesmcpea
FLSUN V400 Power Supply Silent Mod Noctua 60x25
The original setup is quite loud as the airflow from the fan is max disturbed by the case itself. There are people that just cut the metal and make a big hole...that should work to but I like to make changes reversible. I decided to put…
- Downloads
- 200
- Likes
- 40
- Rating
- 4.8
P
PrintablesRegardt Van Zanten
M3x25mm bolt
M3x25mm bolt hex very fine detail. would rather buy this size. M4 prints well
- Downloads
- 199
- Likes
- 9
- Rating
- 0
P
PrintablesX_XGothic
25.5x25.5 convert to 20x20
convert your 25.5x25.5 FC/VTX to 20x20 Category: Hobby
- Downloads
- 197
- Likes
- 9
- Rating
- 0
P
Printablesanthacdc
Goblin Drone suit 25x25mm Flight Controller
Remix of the Goblin drone to suit more common 25x25mm Flight Controller such as the Happymodel X12 (5in1) I also added provision for a battery strap to the bottom of the body so the strap does not need to go around the entire drone. Top…
- Downloads
- 187
- Likes
- 22
- Rating
- 5
P
Printablesjessedukker2010
noctua a12x25 fan blade
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
- Downloads
- 183
- Likes
- 19
- Rating
- 0
P
PrintablesJonny No Stars
Jaguar XF X250 Phone Holder RHD
Jaguar XF X250 right hand drive (UK, Cyprus, Aus, Japan etc) phone holder for a BV9900 phone. None of the designs i could find allow the odd shaped "cubby" to be closed when not in use, this design does, I've spruced it up a bit with a…
- Downloads
- 177
- Likes
- 5
- Rating
- 0
P
PrintablesDrew Purvis
Poker Blackjack Roulette Chip Rack (Stackable) 5x25
This rack was designed to hold 125 standard clay/plastic poker chips (39mm diameter). 5 stacks of 25 chips. The racks can be stacked on top of one another. Finger holes have also been added for easy removal of an entire stack of chips.…
- Downloads
- 173
- Likes
- 15
- Rating
- 5
P
PrintablesBARRAGE
Inlet Spacer for Arctic P12 120x25mm fans
Noctua fans are fantastic, however, not very budget friendly. A very close competitor for PC case fans is Arctic, specifically, the Arctic P12. I happened to have these fans installed in my rig and decided i wanted to try out Noctua's…
- Downloads
- 171
- Likes
- 18
- Rating
- 0
P
Printablescxp
Mean Well LRS-350 PSU Lid for 92mm Noctua Fan (92x92x25)
This is a remix of the "Mean Well LRS-350 PSU Lids for 92mm Noctua Slim Fan" ( https://www.thingiverse.com/thing:3197058 ) with the following changes: fits a 92x92x25mm Noctua fan 1.2mm wider lid to work with newer models of the LRS-350…
- Downloads
- 167
- Likes
- 35
- Rating
- 5
P
PrintablesGrumpy Pirate
TwoTrees TTC-450 / OpenBuilds CNC 65 mm spindle holder adapter - 80x25 hole distance
Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine. Designed for holders that use 80x25 mm mounting hole distances. This plate is thick for a reason! You need a specific distance from the router to the machine so…
- Downloads
- 166
- Likes
- 6
- Rating
- 0
P
Printablesasleepyguy
Lego F1 Mini Collection - IKEA Sannahed (25x25) Display
Overview Display the Lego F1 Mini Car collection (all 12 cars) in an IKEA Sannahed 25x25 frame. Uses Lego style brick inserts to hold the cars in place. My Print Settings & Tips This model was designed and tested on a Snapmaker U1 using 4…
- Downloads
- 153
- Likes
- 22
- Rating
- 0
P
PrintablesDrew Purvis
Poker Blackjack Roulette Chip Rack (Stackable) 2x25
This rack was designed to hold 50 standard clay/plastic poker chips (39mm diameter). 2 stacks of 25 chips. The racks can be stacked on top of one another. Finger holes have also been added for easy removal of an entire stack of chips.…
- Downloads
- 152
- Likes
- 16
- Rating
- 5
P
PrintablesUnscientifically
Voron Trident Inverted Electronics Mod With Noctua A6x25
Building a Voron Trident using the “ InvertedElectronics ” Mod, I needed to mod it to work with the Noctua A6x25. I didnt like the spacer design as it required longer screws which I didn't have. This uses only BOM hardware and doesn't…
- Downloads
- 150
- Likes
- 22
- Rating
- 5
P
Printableshappy
25x25 Modular QR-Code for Seedsigner
A simple 25x25 Compact QR for Seedsigner including a case with a sliding lid for sealing. Dimension Plate: 80x80x6mm Any ideas for improvments are welcome! Printinfo: Used wallgenerator “Arachne”
- Downloads
- 149
- Likes
- 6
- Rating
- 0
P
PrintablesCsaba Baráth
MOUNTING PROFILE CAP 25X25MM
mounting profile cap 25x25mm 3D PRINTING SETTINGS 0,2 mm layer height support not needed
- Downloads
- 146
- Likes
- 14
- Rating
- 5
P
PrintablesBeige_Bambulab
Bladeless Fan for Noctua A6x25 60mm (Dyson Desk Fan)
A bladeless fan made to use the Noctua A6x25 (any Version) The Shroud can be rotated on the Fan-Housing without steps, but should be glued in place in the final position, just like the other pieces That way you can have the future feet…
- Downloads
- 144
- Likes
- 17
- Rating
- 0
P
Printablesdax.neal
20x20 To 25x25 Whoop Mount Adapter
20x20 To 25x25 Whoop Mount Adapter. One is centered and one is offset. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Infill: 20 Filament: any PLA any Category: R/C Vehicles
- Downloads
- 143
- Likes
- 8
- Rating
- 0
P
Printablesfoobik
20x20 to 25.5x25.5 AIO adapter
Printed with PETG-CF M2x4x3.5 heat inserts No Supports needed Enjoy 😊
- Downloads
- 140
- Likes
- 8
- Rating
- 5
P
PrintablesFridi
Mounting bracket 40x40x25x5
Mounting bracket 40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 40min ca.: 3,1m Filament maybe supports, for me it worked without 50% Infill
- Downloads
- 140
- Likes
- 40
- Rating
- 0
P
Printablesfrankgreens
Louqe Raw spacer for Noctua 120x25mm fans
10.5 mm fan gasket for the the Louqe Raw rear exhaust. Remixed from the official Noctua 120mm fan spacer. Changes from the original design: Cutouts to fit around the raw's outer rails. Increased height to 10.5mm. Enlarged the 8 centering…
- Downloads
- 140
- Likes
- 14
- Rating
- 0
P
PrintablesNascentMaker
Ender 3 V2 / Pro motherboard cover for 80X25mm fan (no support) for large LM2596s
This is a remix of Ender 3 V2 / Pro motherboard cover for 80X25mm fan (no support) by scaryPug , which was a remix of Ender 3 V2 & Pro Silent Motherboard by TerraVestra . Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This…
- Downloads
- 139
- Likes
- 28
- Rating
- 5
P
PrintablesDenis J
Alternative turbine for Noctua A12x25
PC Intake turbo compresor alternative turbine for Noctua A12x25 made for MajorHardvare's fan competition, the exhaust pipes are for better spreed of air in test radiator, they are not intended to use in pc only the turbine and front cover…
- Downloads
- 134
- Likes
- 15
- Rating
- 0
P
PrintablesMephisztoe
Abdeckung Kabelkanal 40x25mm (fixed)
Die Abmessungen des Deckels sind im Original perfekt und passen zu den angegebenen Maßen eines Standard 40-25mm Kabelkanals. Allerdings sind die Kabelkanäle selbst nicht "perfekt", so dass die Nasen von der Abdeckung links und rechts…
- Downloads
- 130
- Likes
- 4
- Rating
- 0
P
PrintablesPrintercat64
Ender 3 V2 / Pro motherboard cover for 60X25mm fan
Another remix of this fantastic motherboard cover. Remixed to fit 60x25mm fan and modified/enlarged air vents and walls as well. Included is modified leg to make everything fit. ( https://www.thingiverse.com/thing:4603075 ) Print Settings…
- Downloads
- 128
- Likes
- 31
- Rating
- 5
P
Printablesbust4rhymes
End cap for hollow square tubing 50x25
So i remixed this to fit 50 x 25 mm aluminum tubing. I dont have Fusion so used PrusaSlicer to cut and resize the part. The fit is perfect for my used case so it might help someone else :)
- Downloads
- 125
- Likes
- 1
- Rating
- 0
P
PrintablesGravitySandwich
Honda Chain Guard for NX250, NX650, XL600R, XL600V, XRV650, XRV750 (52156KB7000)
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
- Downloads
- 123
- Likes
- 13
- Rating
- 0
P
PrintablesDrennen Brown
Giant M100x250 Bolt and Nut
Giant novelty bolt and nut for your shelf. 100mm across 250mm high. Or scale as you see fit. After running the nut over the bolt a lot, the action becomes quite smooth.
- Downloads
- 123
- Likes
- 7
- Rating
- 0
P
PrintablesVeylon
VCore 3 Chamber Temp Sensor (NTC 100K 5x25mm)
Mount for a Chamber Temp Sensor (NTC 100K 5x25mm) Uses an M6x12 Screw and M6 T-Nut to mount
- Downloads
- 123
- Likes
- 21
- Rating
- 0
P
PrintablesFabri91
FlyFishRC Volador II VX5 - front 25x25 mm GPS holder
Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…
- Downloads
- 121
- Likes
- 3
- Rating
- 0
P
PrintablesFabri91
Flyfish Volador II VX5 - aft 25x25 mm GPS holder
Aft GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. It mimics the concept of the default 3D-printed GPS holder included with the frame, but enlarged for a 25 x 25 mm GPS module, such as the Team Blacksheep…
- Downloads
- 120
- Likes
- 7
- Rating
- 0
P
PrintablesKriseye
DJI O4 25X25 Canopy
Canopy for 25.5X25.5 mount. You have to push the camera through the gap from behind at the top. It's a little small there, but it does the job. More versions coming.
- Downloads
- 119
- Likes
- 9
- Rating
- 0
P
PrintablesAidan Williams
Fractal Terra 120mm NF-A12x25 top fan mount
Fan mount for a 120mm fan above the psu/graphics card.
- Downloads
- 116
- Likes
- 6
- Rating
- 0
P
Printablesjeloneal
Fan duct for Noctua NF-A15 and NF-A14x25r on Minisforum BD790i and it's variants in Fractal Ridge case
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
- Downloads
- 115
- Likes
- 11
- Rating
- 0
P
PrintablesAntonín K.
Fume extractor 80x80x25 fan
I made a simple fume extractor for soldering. I used 80x80x25 mm 12V fan. There are 3 version of base model, one using a switch and a battery, second using switch and dc jack, third without switch using just dc jack. Everithing is put…
- Downloads
- 114
- Likes
- 72
- Rating
- 5
P
PrintablesCreative_Bear3D
Endcaps for Permanent Outdoor LED Tracks 40mmx25mm
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
- Downloads
- 113
- Likes
- 11
- Rating
- 5
P
Printables🌠🌌
SeedQR Blank 25x25 QR Code (Credit Card Size)
blank 25x25 qr, filled with permanent marker, printed with bambulab ams tpu
- Downloads
- 111
- Likes
- 4
- Rating
- 0