3,867 models
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…
Use the text tool in Prusaslicer to customize your signs :)
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
A print of the Surgical Mask Tension Release Band for Ear Comfort & Extended Use from the NIH website. Perfect for the Prusa Mini. https://3dprint.nih.gov/discover/3dpx-013410 No nurse/tech/doctor will refuse these. Contact your local…
pencil extender for slightly use Derwent and Faber castell pencils. extenders are 100m long with slot 40mm deep good for the last ⅓ of your pencils. didn't have any heavily used Derwent pencils guess I like Faber castell. step file…
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
The original tunnel extension is obscenely expensive, but what do we have 3D printers for?! :D
Simple parabolic signal booster. Stick any aluminum foil inside. Print instructions Print it with a 5mm brim, left or right side down. You need two pieces.
Remix of smysnk 's toe kick clip, modified to fit the metal CAPITA legs. Following the advice of some YouTuber, I used the metal CAPITA legs instead of the standard plastic SEKTION legs. The metal legs are very sturdy and great, but the…
An altered version of the official Handy 2 extender making it easier to print on an fdm printer. I basically thickened the interface part facing the user with 1mm. The result is that breakage is less likely. The internal ribs were also…
I have been playing with extended joystick caps for years, when i purchased the DualSense Edge i found the sticks to be just a tad to short so I made these. I am glad to alter them in any way folks would like if they don't care for this…
When securing cupboards to the wall, IKEA provide some adjustment but it can help to have more options when the wall line is not parallel. Fortunately I found a model already designed by @MotorboatMe_237913 so just needed to modify the…
print 0.2 layer height of finer tightening the thread will hold the pencil in place assembly see image's, 2 or 3 parts depending on your preference. the end cap slides on the half length and chuck screws on to the threaded portion.
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
I extended Volker_Ps hot glue gun stand by 60mm to add a little drip tray. I guess it should be long enough to fit different hot glue guns (please see the pictures to get an idea).
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
This is a standard 12mm hex that is 2.2mm wider than a standard hex, with slightly more depth for the pin. I've printed this in both PLA and PETG. With PETG the fit can be tight due to the stringing, so a little bit of post processing…
I found this filament model very interesting to experiment with so I made some of my own modifications that maximise its potential for a Prusa i3 and allow larger prints to be made on a single run. Main adjustments made to the OpenSCAD…
🔫 Introducing the Bump Stock Extension for Micro Roni Gen4 by Veracon Engineering! Enhance the stability and control of your Micro Roni Gen4 with our custom-designed Bump Stock Extension. Engineered for precision and compatibility, this…
You need one extra M3 Screw + Nut (15-20mm long), one on each side, to complete it. It only works with liftet rear end.
We use the cheap Tapo C200 camera to supervise the sleep of our baby. It has good IR capabilities and can be turned around. As I didn't want this to make a permanent installation, I created this arm to mount the Tapo mounting plate on a…
The second iteration on an assembly made to be attached at the end of a long pole such that a can of fly or bug spray can be operated at range. *Tape pictured is no longer required in the V2 due to the new bolt clasp* Simply attach at the…
A useful end to get into tight spaces, print as many extensions to make it as long as you want. Great for sideboard, side of fridges, tight spaces… There are 2 parts, the base and the extenders. The Extenders push on and twist to lock on.…
German Die Citroën C4 Modelle ab 2020 enthalten eine Tablet-Halterung . Mit dieser Halterung können aber nur folgende Tablets genutzt werden: Amazon Fire 7"-Tablet, Vexia E1, Vexia E2 Plus, Danew 1013QC, Apple iPad 7th Mit dieser…
From my Google Lens search, it appears this handle fits between a 1994-2004 GMC/Chevrolet model vehicles. I made this handle from scratch. It took me about 6 prints to get it just right while also improving it so that it cannot break. You…
I needed extended body mounts for a monster slash build and didnt want to buy them. Printed in PETG, we will see how well they hold up but its cheap to print spares uses m2.6 x 12mm wood screws to attach the posts
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…
To avoid down hanging music sheets, print 2 of the extenders and snap on to your music stand.
I love the rubber band gun by the The_Creatologist But I found that it was uncomfortable and didn't have a barrel long enough for my rubber bands. This remix incorporates all of these features and it is a better model. Here are some print…
This 3D print is for people who use long and/or larger batteries in their PDW style M4. This print uses support, you can paint the support yourself for easier removal or use one of my sliced models. You will need to remove the O-rings…
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
I wanted to extend the “additional feet” and chimney for the printer-box spool tank to allow more room between the Spool Tank and MMU. The filament has a smooth run between the Tank and MMU. The original model can be found on the…
About: Remix of 3 GoPro Extensions Strong Ends by tmorris9 . took the longest one and then extended it length between screw holes is 220mm printable on Prusa Mini+ diagonally total size something under 234mm Please give a like and post…
Tray extender for Dolce Gusto Piccolo XS, for a better fit of certain cup sizes. Print with with 3 vertical shells and no solid top or bottom layer. Adjust infill to own liking. Model snaps in place on top of existing tray.
Using this holder with "Klippbok" like the holder for "Badring" increases user-friendliness considerably. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you…
extended the length of the original design by ~35mm, and added some more rounding and smoothening
These are just hole insets of the “whack a mole CATtoy” for preventing the moles from being stuck when they are being pushed too far in. The extenders have cutouts for allowing the arms to go all the way up. For this reason I recommend…
Since original grocery hooks in the trunk are unusable, I've attempted to create an extender for it. It fits in firmly and now it is possible to hook on the grocery bag. The bag shouldn't be hanging on it, the hook's extender is just to…
3 variants available: [wPlate] => Get SSR90 size with rubber butt cover ( Cover from AirsoftPro ) [Nature] => Get SSR90 size without the additional cover, provide bigger space [eone_remix] => Same sizes as enone version, just rounded…
Link to CAD: https://cad.onshape.com/documents/e6e09e9e0e007a10af293064/w/ebebf269118f97728c774686/e/3e5ef0c7e7cf5655f47403fc?renderMode=0&uiState=63e95f946c42ea2abe0b7efe
This retrieval hook was designed to attach to a standard expandable painters pole available at most hardware stores. It was printed with PETG but other material would also work. It is a bit more flexible than I wanted but that does not…
We wanted to increase the height of a shoe rack so that our robot could crawl under to clean. So I designed some leg extension. In this design, there is a hole that I manually threaded to fit the original screw of the leg that was in…
A Dumbell Handle Thickness extender to get a thicker handle. Increase the handle diameter from 25mm to 30mm. Print 0,2mm layer height PETG/PLA without supports Take a look at the .3mf file for the print orientation Material 2x M3x16 2x M3…
IKEA CITRONHAJ Spices Stairs These stairs are specifically made for the 20cm wide METOD Kitchen Cupboard with pull-out drawer Put these in the top shelf with 4 Citronhaj or print more of them :) Extendable Low Tolerance (0.2mm gap on…
Print just like regular Prusa parts. Fits the frame just like the original. You need two extra M3 screws to mount the module.
one-to-one replacement with existing UM710 Kyosho Part
a simple screw-like extending pillar, with a rotation locking slider for locking the height.
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
This is a system for extending the height of a Premier One Poultry Fence. The fence pole extender is designed to clip tightly to the pole. Then insert a garden stake (I use 18" green metal-core garden stakes from Ace Hardware). Finally,…
EN: Extendable telescopic stabilizing rod/tube/pipe for the "mini photo studio screen holder", print-in-place Redesign The "mini photo studio" with my Remix: https://www.printables.com/de/model/764195-mini-photo-studio-screen-holder-remix…
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Adils extender 80mm A leg extender created because I couldn't find a 80mm one that would print fast and as simple as possible. In the first photo is the orientation it has to be printed (it has an internal chamfer). I advise using PETG or…
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws. I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed…
I assembled the RP2040 ( SKU 1030018) with the additional header pins - this remix is to allow fitment of the board with extended headers. My application is more likely to get wet, so I opted to close off the light pipes. Recommended…
Raccord IKEA Jerker pour réhausse Ceci est le raccord pour fixer la réhausse du bureau IKEA Jerker (j'ai un V1, mais cela doit aussi fonctionner pour sur les montants d'un V2). Quand on dispose de l'option réhausse (qui se monte au-dessus…
Clothes hook has been lengthened, as this saves more space when the jacket shoulders are lower underneath each other. This suits my needs better. I hope others will too. Kleiderhaken wurde verlängert, da dadurch mehr Platz eingespart…
Got a new keyboard did not like the height of the legs so i quickly designed some new legs, double the height. i made custom support on the round thing that goes in the keyboard that need to be snipped off with flush cutters or a file.
Mounting hardware for range extender of DualShock 4 controller with universal DS4 zip-tie attachment. The long range capability can be done adding RC joystick module from https://github.com/ctu-vras/rcjoy . System is fully see-through and…
Extend ceiling lights to improve looks and resolve hole imperfections. Designed for 4" lights but can be adapted to fit any size with ease. FreeCAD model attached.
Inspired by this version for the round baby mobile arm, I decided to make one that fit our square version. Designed in Onshape , feel free to remix. Printed in PLA with supports and low infill which works just fine!
I made the extender by sinking the original in to the build plate and then increasing it's size. Next, I took the original and used it as a negative volume to empty out the inside so it can just friction fit on top. I did find that it was…
This is a replacement for the Tzumi ionvac 3-in-1 design vacuum extender handle connector clip. When the clip is broken, the connection with extender handle could become loose. Print 0.4mm nozzle, 0.2mm layer height, 3 perimeters, 100%…
This is a TV mount for the OREI 4K HDMI over ethernet extender (model UHD-EXB400R-K). Print the model and use double sided tape to attach to your TV. Printed on a PRUSA Mk4S w/ MMU3 in Original Enclosure with Overture PLA. PLA, 0.35mm…
I made this SpiceShelf Extender to get a bit more room in my spice rack. It holds two small cylindrical jars and fits neatly into my store-bought spice shelf. Dimension of a jar: round about 41mm diameter, 77mm height Motivation: Our…
A simple light switch extension intended for those who want the longer reach for accessibility purposes but also want them to be decorative. Fits narrower light switches that measure from 6.5mm horizontally across at the tip to 7mm wide…
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Building a large minifig wall meant that printing AJ Raceway's awesome hexagons individually was taking a little time. So I whipped up some larger options depending on the size of your print bed. You can now print a set of 3 or a set of…
This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long. You need to print 2 copies of the…
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
Since the Jonsbo N2 originally only comes with a quite loud “slim” (15mm deep) 120mm fan in the back I wanted to swap it out for a quiet fullsize (25mm deep) fan. Unfortunately due to the very limited space in the back of the case this…
There are so many of these out there. The AAA batteries in others could get clogged. This should be fixed here. I modified this so that you could attach them side my side to form a block and allow for more storage. Mix and match as many…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
Redesigned the slot little bigger to fit more screw types. Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work. Offset pin/hole: 0.3mm circular Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5…
I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries
all stock hardware. I used pps-cf filament but anything should work
This is a remix of “Laptop Stand” by finke. I really liked the original model, but added 15" computer support and some nice to haves like a stand version with no lip so you can close the computer and an optional connector for…
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
Extendable and modular stackable drink dispenser, multiple combinations and configurations in heights, levels, rotations, etc. Model measures The model is designed for the 66 mm diameter x 115 mm long can. You can make other dimensions of…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
It's an extender for coat hangers, to hang a coat hanger on a coat hanger to have a coat hanger chain gang of coat hangers. Print instructions Category: Household Supplies Summary It's an extender for coat hangers, to hang a coat hanger…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
Extended/custom shaped barrel. No supports should be needed. Hope you enjoy. Included is the barrel latch, there was alot of play and lack of spring. Made latch catch a little thicker. I’ve uploaded my own version/custom form fit grip. It…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
✏ Back to School with a smart and useful idea! How many times does a pencil become too short to hold comfortably, even though it still has plenty of lead left? With the Pencil Saver , a simple 3D print, you can give your short pencils a…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
![94-04 3rd Door Handle for Chevy S10/GMC Sonoma Extend Cab [Handle Only]](https://media.printables.com/media/prints/222498/images/2035579_b4df1ecf-e043-47cd-ab54-777467923c9f/print-measurements.png)
