78 models
Print instructions This model was used for foam insert to the plastic suitcase TEKNO 2011 - so it is tight fit(dimensions same as parts inside). In case of 3D printing of this please add +1mm offset entities to all lines -> in other words…
I did a fusion 360 reverse engineering of stl files. I modified the path of the gear to better fit and generally improved to print with FDM printer UPDATE 1 05/12/18* Added a new screw to better keep in place the e3d v6 extruder with less…
Hi everyone. I share here my solution to provide some wind protection for the Kawasaki Z750S. As you may have already found out if you arrive here, getting handguards it's difficult, most of them don't fit properly. And if you are like me…
Možná varianta místo originál CZ75D zásobníkové botky. Tištěno z PETG s 70% výplní. Pravděpodobně lepší pevnost z nylonu (neodzkoušeno).
**Update See Below** Recently aquired a CZ75 Compact PCR. Searched for mags however I only came up with 17 round mags instead of the stock 15 round. I found this file browsing the internet but I cannot relocate it to give credit to the…
Self-designed and simplified recreation of the originally buffer plates for the CZ75 but with twice the height (5.7mm), to reduce the bounce and increase the lifetime of the gun. Originally these are made of a solid plastic, but with a…
This is a bottom part of CZ 75 Shadow 1 / 2 magazine with loose picatinny rail to attach the Mantis X device. You don't need to glue the picatinny into any of your magazine bottoms anymore. This works well with the magwell as well. Notice…
Made as a replacement for MOZ7's GPSmount, if you have a GPS M10Q model, 25x25 mm mount. There is a slit for strapping it down with a ziptie for extra security. Made using fusion 360. Printed on Creality CR6-SE. Not really suitable for…
Nachdem mir an meiner Hager Unterverteiler wieder ein Kunststoffteil abbrach, hab ich mich im Internet auf die Suche gemacht und das Model für den Türstangehalter an Hager Unterverteiler Schränken gefunden. Es ist das Model für den…
IO plate for GIGABYTE GA-Z77X-D3H (rev 1.1) - I think it would work on other revisions as well. Fusion 360 project: https://a360.co/2HJfZyb Printed flat side down with no supports, material and quality don't matter because the print is so…
Aussparung für seitliche Anschlüsse hinzugefügt (USB / TAE) Die Druckdatei im 3mf Format ist mit BambuStudio Version 1.8.2.56 erstellt. Sie enthält “negative” Teile um die Aussparung zu ermöglichen. Ggf. das linke Teil einfach spiegeln um…
This is remix from https://www.prusaprinters.org/prints/17584-bondtech-bmg-prusa-mk3smk25s-v2-fdm-printable-rhd- for Dragon Hotend without aluminium adapter similar like E3D v6 This is a quick conversion, so please comment if there is a…
Bumper for Geprc MOZ7 frame. Two versions Just bumper Bumper with dual ELRS antenna mount Insert antenna into bumper can be little tricky because entry space is only 0.5mm. I used Happymodel ELRS antenna. For example antenna from…
Added mouse ear to Pinda sensor and Pinda screw hole is filled due to cracking problems.
I used a Z71 graphic and a lined Chevy Bowtie to create a wall hanger for a friends tool box or garage wall. I added a rectangle slab with infill but no top or bottom layers to create the see through effect. I also entered 3 color changes…
this is a light remix of MarcoZ76's model just added 2 things for better printing.
I made this remix to be able to install the BetaFPV 2G4 T-Antennas to the front of the GEPRC MOZ7 O3 frame. The base is now a little thicker and there two holes for M2 screws with recessed heads (M2x10). This way you install the antenna…
The camera is held on by the bottom screw that goes through the bracket. A "plug" is created instead of the second screw For print use TPU UPDATE 2.11. 2025 - add adjustable insert
I've added the 3DTouch sensor to the Bondtech BMG Prusa extruder. Personally I don't like the inductive sensor as the detection height depends on the thickness of your steel sheet bed, which means if you have low quality spring steel…
Support are required almost for one hole
Jedná se o lokomotivu Z70 švédské železniční společnosti. Model je v měřítku "0" (1:45) s rozchodem 32 mm a je vytvořená jako součást OS Railway. Součástí jsou i soubory pro zdrojový kód pro arduino (ten ovšem nemám vyzkoušený). Spojovací…
GEPRC MOZ7 V2 GPS Mount This model is designed to accommodate a smaller GPS unit than the original mount was intended for. Weight is reduced by more than half. Compatibility Flywoo GOKU GM10 PRO V3 BZGNSS BZ-251 Others with same…
There are 3 models, Front Flap(the closest flap when you look at the cup holder), Back Flap(the furthest flap when looking at the cup holder), Extra Flap(the little flap for the small cup holder that swings out). I have designed these to…
Here are grips for your ASG CZ 75 D Compact. There are three models : a grip similar to the original, with the same thickness ; a thin grip (-3 mm for each grip) with a honeycomb pattern ; a thin grip without pattern. The thin honeycomb…
Drop-in interior for Rivarossi's 1920's Heavyweight Observation Car, based on blueprints, http://prr.railfan.net/diagrams/PRRdiagrams.html?diag=priv_180_fp-46249.gif&sel=busi&sz=sm&fr = , of Pennsylvania Railroad's "Philadelphia" Z74c…
Magazine follower for CZ75 and it's variants, follower is the same for magazines in 9mm Luger and .40SW, printed without supports. Changelog: 5. 7. 2026 Description modified
Asrock z77 extreme 4 IO shield
This is the model with original sizes of damper of the fuel tank for Kawasaki Z750 year 2007 onward. The model must be printed with TPU with 20% of infill and 3 vertical layers and 4 horizontal. The model respects the original measures of…
0.08mm layer height designed for multi color
I couldn't find a stable part for it, so I just designed it myself
You will need to glue it or use double sided tape
Bumper for Geprc MOZ7 frame with horizontal ELRS antenna mount I recommend printing upside down. Print from TPU
CZ75-Auto CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
I needed a way/place to mount the Vi-Fly Finder 2 to my GepRC Moz7 frame. I recreated the front antenna mount that slides/snaps onto the carbon fiber frame peg thing and it still will house the antenna, but also has a box to put the…
TRUE diversity antena ELRS 2.4 GHz mount for FPV drone GEPRC MOZ7 v1 located bellow main camera. Orientation is exactly 90° as recommended for TRUE Diversity technology give you the best coverage of the signal even in the blind spots…
Maneta cierre puerta para lavadoras Fagor, Edesa o Aspes, entre muchas otras. Cierre puerta escotilla lavadora completo. Gama 89 y 90. Tirador escotilla lavadora. Códigos originales: Brandt: 52X2173 y 96X1004. Candy: 7025465. Fagor:…
This part replaces extruder-idler-mmu-R3.stl for the MK3S+ & MK3.5 extruder chimney filament sensor trigger mechanism for the MZ76 bondtech geared extruder and pancake stepper Category: 3D Printer Parts
This is a design for a replacement knob for a Leica MZ75 or MZ8, which may also fit other m series scopes. I don't have more models on hand to check. Test photo is with a Chinese MZ8 clone which has identical knobs to the real MZ75/MZ8 (I…
Antenna mount designed to attach the Radiomaster Boxer antenna to the front of the GEPRC MOZ7 V2. While the antenna is originally intended for use with RC transmitters, in this setup it is repurposed to handle radio control, telemetry,…
Lens Cap Holder Lumix FZ72/82 and alikes. Slimmest fit possible. To get the nicest finish on the exposed surfaces i printed it standing on the fot with support underneath the whole bottom. See picture. If you are having problem with…
Print Settings Material: PLA works but you may wish to print this in a stronger material like ABS / ASA / CF-Nylon Layer Height: 0.2mm Infill: 20-50% There really isn't much infill in this model, but you want it to be strong Take care…
I needed a quick, temporary solution to mount four SMA antennas on the MOZ7, so I designed this to also allow an SMA antenna to be installed at the front. Hardware: 4x M3x5 screws 1x SMA pigtail Support my work: All of my models are…
I printed the base using PLA but PETG will do just as fine. There is no need for supports and the print is very easy. The Zybo just needs to be pressed into the 2 holes. No screw required. I printed the feet out of TPU. Those are snap-in,…
Here is a replacement plate for the gas magazine of the ASG CZ75D. The STL file is in the correct printing orientation. I recommend printing with PETG, 0.12 layer, using normal supports. It is a very tight fit, but once inserted, it stays…
To keep the antenna from vibrating, I also secured it with a zip tie. Print from TPU
Print Settings: Material: CF-Nylon You want this to be capable of withstanding ambient heat radiating off the engine as it's relatively close when mounted Layer Height: 0.2mm Infill: 20-50% You want this to be strong to account for…
I recently purchased a NEWEER Z1-N flash along with some friends and noticed there were no battery caps included. According to the product page this battery is used for Z1, Z2 and Z760, however I've only tested it on my Z1-N. As a result…
While my Nikon Z7 was mounted on the telescope and connected with a computer, the connection was interrupted from time to time because of wobbling connectors. I don't know if this holder fits also on a Z7 II, Z6, Z6 II - please leave a…
CZ75 Shadow 2 Magazinhalterung. Mit einem schraubbaren ø30x6,5mm Magnet hält es sehr gut. Wenn Sie mich unterstützen möchten, können Sie auf den untenstehenden „Affiliate-Link“ (Achtung „Werbung“) klicken: Folgende Magnete habe ich…
Print in TPU, standard settings
The MIPI cable supplied with the Edge T3 is too short to fit the T3 Air unit as intended in the Geprc Moz7 v2 frame. This small bracket is my solution to solve the issue by mounting the VTX further forward. Run the MIPI cable under the FC…
Loved MarcoZ76 BMG extruder and a big thanks to him for this excellent model , I just found a few little things that bugged me , one major one being where the clamping force was being applied to a very thin section around the extruder…
This is the rear section of MarcoZ76 Prusa Bondtech extruder with some modifications as i found loose nut and magnet holes and parts that cracked around the pinda holder were engineering issues so i redesigned with stress relief and…
simple mathew branded hanger for my z7 extreme. simple. 2 dry wall screws, not much else too it lol. does it work on other bows ? no clue, give it a try. I didnt use any supports, 3 walls, 15% gyroid... holds my bow, all i need.
very basic, but functional output shaft seal driver for 1st gen z1000 and z750 engines.
Created this mount to fix the rotation of the Phaetus Dragon in the Bondtech BMG extruder i just printed from MarcoZ76 BMG Bondtech which is a excellent extruder design but check my other models as ive made improved versions of the BMG…
Remix of Ben49's design. Resized to fit on compact CZ 75 D. The rest remains unchanged. Still needed M5 nut and M5x35 CHC screw. Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
Remix of Ben49's design. Resized to fit on compact CZ 75 D. The rest remains unchanged. Still needed M5 nut and M5x35 CHC screw. Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
Nowadays, it is difficult to find spare magazines for the Alfa Defender pistol. However, since the design of the weapon is based on the CZ75, I managed to find out that it is possible to use a magazine from the CZ75 Compact. A small piece…
I'm a big fan of MarcoZ76's FDM-printable redesign of the Bondtech upgrade for the Prusa MK3s. After taking apart my extruder for maintenance a few times, though, I noticed the screw holes for the extruder fan were getting loose. My fan…
Printed on a Voron 2.4, 0.6mm nozzle, 0.3 layer height, 2 walls and 30% cubic infill. Use 5mm brim on the funnel (second image) and 0.15mm layer height modifier on the nut threads (third image). Attach the nut to the clutch cover. The…
CZ75-Auto CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
It's just a reupload, so I earn nothing from this. I'm just helping you guys out because I have the Moz7 myself. Print Settings: Filament: PETG - I used PETG for the quality, but you can use something else too. Infill: 60-70% Supports:…
Podavač zásobníku pro pistole CZ75 a její varianty, podavač je stejný jak pro zásobníky v ráži 9mm Luger a .40SW, tiskne se bez podpěr. Magazine follower for CZ75 and it's variants, follower is the same for magazines in 9mm Luger and…
# Description This is a custom-designed handlebar phone mount bracket made specifically for the 2004–2006 Kawasaki Z750. It installs by being sandwiched between the handlebar clamp and the top mount, providing a strong, centered, and…
I bought a new Hager distribution board and some quick connect terminals to go with it, but there was no suitable mounting base included in the set - so I had some fun time with FreeCAD instead of buying a ready-made part. This base mount…
Two hole mount fan bridging shroud for the MarkoZ76 BMG Extruder , I made an updated front shell for the shroud mounting so see my other listing . https://www.printables.com/model/1784174-updated-marcoz76s-bondtech-bmg-prusa-mk3smk25s-for…
The plastic barrel for the brake light switch assembly of a 1978 Kawasaki KZ750 The original was snapped in half due to previous owner accident, I tried gluing/epoxy etc, but it wouldn't stay in one piece. So I designed this and lo and…
This is so I can use the MZ76v2 BMG Extruder together with the MMU2S MK3S Filament Sensor Cover just a simple mashup of the covers. Bondtech BMG Prusa MK3S/MK2.5S v2 FDM printable + RHD ver.C fan Shroud by MarcoZ76…
Replacement for the main seal inside the blow back unit for most KWA pistols. Print in TPU, works great for me.
Y3000 Camera mount for Kawasaki Z750R (M10 Mirror hole) Category: Camera
