1 / 3
Prusa i3 MK2/2s PSU Cover with rear power input — zdjęcie 1
1 / 3

Prusa i3 MK2/2s PSU Cover with rear power input

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a PSU cover for Prusa i3 MK2 (and MK2S) that has the power input on the back.

Ocena
5 / 5
Polubienia
21
Pobrania
134
Wydruki
3
Wyświetlenia
548
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two versions to choose from, whether you want to have the hexagons or not. 

Don't forget to add a bit of support, as this model is a bit "deeper" than the original to accommodate the new location of the power input: 

This is especially important as the first layer of the bracket is not level with the bed (see above picture)

Recommended to print in PETG, ABS or any other material better suited to handling heat than PLA, due to the proximity of the heatbed. 

No additional hardware is required. Apart from the additional support, it's a simple and straightforward print.

If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is getting old, and every bit of support helps. 

Tagi