Liczymy pasujące modele…
On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
I am probably mistaken, but most screw measuring/sorting tools seem to be more bolt orientated as missing 3.5mm and 4.5mm in all other models and 2.5mm in most cases. I liked the one by Boogie a little longer than most, leaving space to…
Picture of copper silk printed by ken. Remix, same 100mm tall, 98mm at the top, 65mm at the base, 1.6mm thick with a 1.6mm embossed extrusion. Holes in base and side. Pictures to follow once printed Using left over PLA+ Marble. Print…
There are many S-Hooks but this one is mine. Wanted a little and large S-Hooks to hang various items on a bar I mounted in my little shed. The small hook is 5mm Radius and the larger 12mm Radius. Whole S 5mm thick. It fits onto a 5mm…
There are loads of S Hooks and this remix is the one that was for a specific job for myself. This is a freecad Parametric version that you can change Thickness, Width, and circle sizes. Just use the spreedsheet. Freecad is obviously…
A 100mm tall, 98mm at the top 65mm at the base. There are 3 Embossed Flowers 1.6mm extruding out from pot and the pot is also 1.6mm thick There are holes in base/side Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports:…
The original was a little to large for my meager cheap chisels, so I have reduced the inner whole to 19mm and also increased the entance gap by a couple of mill to. My rusty chisels I will try to save after finding my kids trying to break…
After using Fusion 360 I decided to try Freecad and this is my first attempt using this software. 60 x 60 mm pot 55mm tall the Pot uses the vase setting. The Pots have removable bases to make it easier to move the plant on, to big pots or…
I needed a keel clamp to start in the production of a model boat build and decided it would be cheaper to print one than buy one. However search as I may I could not find one. So I ventured into making it. I wanted it to come apart for…
Have spent more than a little time trying to produce a mount for my spanners, wanted something to grow when my collection did so had to be individual but only had a small foot print, as well as showing the size of spanner. My first…
Chilli and pepper Plant labels. Plus more being added please see table below Sorry Painted in lettering and not double colour printing Taken from https://www.thingiverse.com/thing:3079639 I used a draft setting, nozzle 215c bed 60c. Label…
Found this on Cults https://cults3d.com/en/3d-model/tool/spirit-level-holder , but was not the right size. The arm was too short. So using the PrusaSlicer I changed the Z height only from 20mm to 30mm. keeping everything else at 100%…
Looked at a few other examples but nothing I found that I could change to suit so made my own. Onshape users can copy and alter as you wish. To view click HERE Have updated design and is now Parametric. The bolt was required to hold a…
Attached STL is for 196mm base and 204mm diameter at rim and 22mm tall. and the largest my Prusa would allow (base Diameter.) The sizing can be changed to suit using the spread sheet on the attached FCStd file. Decided to add the Square…
Remix on My previous changes to hold one more chisel
Remodel from pegboard version link below. Firstly I removed the pegboard holder aspect and added 4 x 4mm holes as I was looking to mount onto wooden shed wall. It became obvious once printed that this was for much larger tape measures…
https://cad.onshape.com/documents/efd830be1de9577ec73c02b0/w/de4ed777609cf3503e3b7457/e/c6fa6f21c00a8d6d9d3f0f53?renderMode=0&uiState=6495903704291418787e5376 I have placed a link to the original document above so that you can copy and…
Ok, using the features of the marvellous PrusaSlicer I only needed one of each STL. By changing the size Parameters, and using the cut facility, along with a pot of superglue. I was able to achieve various sizes as required including…
Twin RYOBI battery holder, I cannot find the the original on the Onshape website from where I copied it from on a free licence.
Needed a stronger fitting, had used the original successfully on a standard frame fitted filament holder on Prusa mk3+ However, the wife gave me a cupboard to put my printer in rather than sitting it sitting on the side under the stairs.…
Remix, same 100mm tall, 98mm at the top, 65mm at the base, 1.6mm thick with a 1.6mm embossed extrusion. Holes in base and side. Pictures to follow once printed Using left over PLA+ Marble. but other colours available. Sunlu 10% off at…
Liked my first design but thought it could be better. Firstly the stl ‘item called support’ is different to the pictures. During changes I made to the arm and foot base width, making wider. Although the base holes remained in the corner…
Double, Simple, small foot print, molegrip, locking pliers holder. Picture shows the first set attached looking for my second set. 4mm screwholes, 1.5mm thick base, 14mm x 9mm oval arm set at 5º angle.
Needed a 6cm x 6cm bracket/brace for the a homemade bed frame leg. downloaded a few and tried resizing without success, so another bracket and freecad file available Category: DIY
Simple clip on a block that clips firmly onto my guttering. There is a 4 mm, approximate, extruding lip on the guttering. The item is 30 x 40 mm and 25 mm deep. The clip is 6 mm wide this teeth are offset and 1.75 mm before 0.5 fillet.…
Plant labels. Plus more being added please see table below Sorry Painted in lettering and not double colour printing, Found a very light soft grit sanding made using the fibre tipped acrylic paint pens easier to use. Taken from…
My wife decided to run LED solar string lights along various fencing etc. With small gardens placing the solar panels on the floor would not give them much time in the sun. Currently 3 versions available, we have curved fencing so…
Cotton Pad holder stands about 7.5cm tall. On first use it became obvious that I needed something on base or cover to be able to pull the top off. The STL for the base is therefore different to the picture of the physical item printed, to…
I am not sure what to call this model as it is 2 makes and a remix. But I wanted to show the model as a whole in one place, so, A nod to the following two models used to produce my end product as well as remix of the “ESP32 Cam Holder”…
Designed to fit on a Prusa mk3 and hold nine 6cm cardboard seedling pots. UPDATED 17/04/21 with pot to fit 0.8mm thick UPDATED 18/04/21 at last I have got to grips with the vase setting on the PrusaSlicer new pot stl added. You can see I…
On going effort to fit my Prusa in a cupboard matching the rest of cupboards under the stairs. Mounted to the side aluminium frame using half roll in nut M4 x 2. I only had 15mm bolts and packed out for firm hold. Have reduced the length…
I Used a couple of pre existing prints to make this for my brother. He enjoys off road driving and after quite a few years he just won his first event and for what ever reason he did not get a trophy so I made him one. spray paint and…
On printing the DLD Filament Buffer for MMU model it was shown with a small clasp purchased through a foreign website. I am sure you can buy from eBay or Amazon, but choose to make my own. I took the clasp from the Tool box parametric box…
I broke the original using the cables as a handle while carrying on my walking stick. My first Purchase was the wrong one and after hours of searching decided i would try and make one.…
Although I have since found similar on prusaprints my remix came from https://www.thingiverse.com/thing:2918462/files. Again looking for individual holders for my various and individually purchased screwdrivers to mount in a small area.…
If making just one layer than the top stl files and a middle file are all that is needed. The middle tray is the same file on all layers required. If making multiple layers then the bottom stl's are used for each layer and topped off with…
Not Had Chance to print yet but will print. This is more a remake form the ground up to but sharing Similar sizing. I was asked for an Imperial version, but after making lots of individual metric I decided to get into this Parametric…
Approximately 16cm long and a little over 9cm tall. Covered in felt and a resin filled base.
After printing several of the previous version it became obvious that some help was needed to drain excess water off the top. I have designed this one, same pot holder just a few channels and holes to allow water to drain through. Added…
Tried a similar print from another site but the hole was too large and the lamp still had a tendency to tilt. I struggle without a good Step file to make changes so made my own. I have attached 3 different inner circle sizes. Just incase…
There is nothing wrong with the previous model except that it did not fit my 2022 Fire Tablet 7. My tablet is slightly thicker and deeper For this model. I have tried with two different TFT screens over numerous years to attach a touch…
Couple more labels more to follow, Using an acrylic paint pen after a soft sanding over lettering Coriander, Parsley.
I have a very limited space for my 3d printer and computer and so produced this to hold my computer keyboard. It fits under a home made shelf in a cupboard. The inner hole is counter sunk to aid a smooth passage of the keyboard. There is…
Longer, Taller , added feet, broken into smaller pieces for easier printing. Some original added parts. used super a glue to hold together. used OnShape and link below for those interested.…
Amazon bought Fibre board keyring broke so decided to make my own not yet printed, will add photo once done. Have added a few pictures and the Gcode to the multi coloured on my single colour machine Used onShape again a link below I…
Out off all the draws I liked this one best as it hooked onto the frame and therefore did not move about need screws etc I managed to cut away everything leaving just the left hand frame attachment and wall. Using OnShape I made a…
If you do not screw the Pi3b to the base then the lid will fit. However I chose to screw the Pi to the base which then forced the lid up by the height of the screw. I have attached two pictures showing before and after. The uploaded stl…
The one thing I seem to damage but can find no replacement for is the plug that fits into the end of the walking stick. I found without this the walking stick would push through the Ferrule. Most likely as my walking stick doubles as a…
Walking stick/Seat Flipstick my god send. A walking stick and seat rolled into one.
I have added the stl files in the 66mm width of the original file. Although I have and will be printing individual bins wider as i will be using for DIY items. Screws, nails, wall plugs and the like. The double bin is too big But as the…
To wszystkie aktualnie dostępne wyniki.
