Liczymy pasujące modele…
Model adapted for better printability Works exactly the same way as the original. for the same fit as the original make sure your printe accurate and has no elephants foot. if you want to be sure it works increase the scaling to adapt the…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SKZOO Cookie cutters for all eight members of Stray kids. Preferably print out of ABS/ASA to vapour smooth, so it's more food-safe and dishwasher-safe. But any filament works, as there are no overhangs. Keep in mind that 3d prints are…
This toolhead cover favours strength and low weight over easy access and magnets. If you install the constellation extruder you won't need to access the hotend often since you can simply change the nozzle from the bottom. It also doesn't…
This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…
New improved version out now! What do these blocks do? They allow the use of toothed idlers that will drastically reduce belt pitch vfa Can reduce rattling noise on fast accelerations (seems to depend on material used for printing) Easy…
Print parts as oriented. The neck needs supports for the curved surface near the printbed (make sure that the hole for the carbon rod doesn't get supports). Submit feature requests here!
The Centarui Carbon shoves the filament cutter arm into the gantry while cutting, this reduces the amount that the filament cutter gets pushed by 1mm and avoids this issue. Compatible with centauri series Thanks to Bigtime and nicoave97…
I did very litle work for this. Full credit to ruredi for this great design and making the step file available. V2 has an improved tooth profile Modify parameter in fusion 360 1- Pass through gt2 belt in cover 2- Push fit belt to toothed…
Extension tube for Nikon F mount. Minimal hardware required only for aperture control. There is a groove on the camera side to allow for the lock to keep it in place, this same lock will with a bit of filament lock the lens as well. Keep…
Since it's 3d printed the accuracy depends on how well tuned the printer is Print out stiff and low friction material, favor pla over petg inherent multicolour support with different parts for the different colours with the text combined…
Step file that this model is based on, from Beattune which also wrote the macro for wiping the nozzle 2 Heat insers M3 - D5 - L5 Thanks Huz_engineered for fit testing this print!!! Submit feature requests here!
Replacement hinge for the audiotechnica m50x. This part has been modeled for the left side, just mirror the part to have the right side. To replace this part follow this guide from step 5 to step 13 while skipping step 10, and just…
pasue before the layer where the magnets are bridged over to put them in The magnets used are 6x3mm disc magnets, N35 are strong enough for reasonable infill settings V2 makes alignment a lot easier by having a conical bottom and the…
Box to organize small stuff with movable bins to get the bins visit the orignial Lid easy to open and close, secure lock Joint is one piece of 1.75mm filament cut from the spool. Not a printed part. Interchangeable inserts combinable No…
Improved belt attachement for the printhead, fixes cosine error by having the belt inside the extrusion, and doens't pinch the belt like the stock mount. There is a screwhole to help keep it in place if it comes loose. It works with the…
Instead of hoping that the springs are the same stiffness and didn't buckle or that the belt wear is uneven, you can tension the belts manually to be right. This mod is a very simple yet effective method for adjusting the belt tension. Do…
Improves print quality by keeping the external radius of the belt constant. Won't fit Runice idlers Print settings: No supports Optimize for strength Print as oriented Print materials: ABS/ASA PETG Pla will deform over time and loose…
What does this mod bring you? Higher gantry stiffness even with same belt tension due to stepper shafts being constrained Possibility to tension the belts to spec (need to shorten the belt by ~3 teeth to reach full tension)) no risk of…
Easy to print with big contact area with the printer to avoid bending. Has slot for managing another cable for accessories like beacon or endoscope Print in PETG or other heat reasistent low creep material.
Smaller, easier to print uses UBBI If paired with the optical filament runtout sensor by SilentFrost then the Hub to sensor distance is: 45mm or 60mm for the low friction version For the low friction version, print as oriented and add a…
How is this better than the stock one? This belt carriage doesn't use belt clamps which damage and weaken the belts. When under tension the back side of the belt is pressed up against a metal corner which damages it further and leads to…
Print as oriented with default structural settings, no supports PLA not recommended as it will become loose with time Keeps the chain securly attached to the printer Submit feature requests here!
New improved version of my runice idler gantry blocks! there are quite a lot of improvements and some drawbacks: Compatible with full Centauri / Carbon 1/2 lineup stiffer assembly one piece design less hardware F695 bearing stacks instead…
Parametric nespresso wallmount
Buckets are available with the original This goes for every printed/plastic thread, do not overtighten it, even tho these ones are a bit more resiliant. Same print settings as the original: support generation needed for the area where the…
Why is there yet another Internal spool mod? For one simple reason: This one doesn't require a panel spacer And since the space inside is very limited it uses a latch to hold the spool from the inside, this was tested with elegoo…
Works with every type of filament as long as it's approximately 1.75mm in diameter, is low friction and small BOM : Kailh Black GM 8.0 Microswitch or equivalent 4mm Ball Bearing (or unpack a 608zz bearing) M3x6 BHCS small cable tie to…
How is this better than the stock one? This belt carriage doesn't use belt clamps which damage and weaken the belts. When under tension the back side of the belt is pressed up against a metal corner which damages it further and leads to…
Fully parametric slide box, with a small spring to hold them in place. The lid is held on with a friction fit. The model was created in fusion 360 where the parameters can be edited To adapt to your slides/printer: Measure your slides…
Features Ergonomic handle 2mm preload to keep the blade under tension stiff connection to allow for precise use Tested BOM 300mm hacksaw blade 2x D4-M3-L12mm Binding screws Print settings Insert solid layers: 33,34,35,42,43,44 0.2mm layer…
Adaptation of the Xol carriage to use bottom belts instead of front belts. Still need to calculate the loss in Y and maybe Z (could also be gain depending on how the cables are managed). Prerquisites X axis rail for Neptune 4 If you have…
Internal poop bin to maximize volume while being compatible with my internal spool mod It's not the easiest to remove but it makes spool changes easier while not being to difficult
Small parametric bracket for holding an endoscope camera The base model was made for a cheap aliexpress one with a diameter of 7.2mm, but you can change that slightly in the model with a maxium of 8mm same goes for the offset from the fan…
Stronger tensionner bracket compatible with the improved tensionner for toothed idler. After months of high belt tension the stock tensionner crept out of shape making the belt rub on the idler, this fixes it. Identical aesthetic than…
Yet another cam mount for neptune 4 series, that hangs over the printbed near the extruder. The pivot has 40 teeth to keep it from drooping over time. It can also work for any 2020 extrusion, and thus a lot of other printers, you just…
Print out of high temperature low-creep materials: ABS/ASA (Recommended) PETG Don't print out of PLA, it will work for 5min max To modify the parameters, open the file in Fusion 360 Submit feature requests here!
5015 blower fan bottom for more static pressure and less noise BOM: M3x20 screws 4x 5015 fans 2x 6 magnets that are up to 4.5mm thick, diameters compatible: 4mm, 5mm, 6mm, 8mm back magnets are limited to 3mm thickness Submit feature…
Easy to print. Needs 2 M3x5x5 heat inserts to screw in the magnet. Front plate has room for 2 countersunk wood screws. Submit feature requests here!
Small cylindrical box with holes to let the silica gel do it's work. Screw on lid for easy use and mounting bracket for cheap noname aliexpress hygrometer (rounded square design 43x43mm)
What purpose does it serve? If you have to permanently remove the bottom cover of your printer you can still keep the fan in the correct position to cool the mcu and stepper drivers. This mod also allows you to have a bigger fan to cool…
HARDWARE 2 M4x8 BHCS 1 M3x20 BHCS REUSED PARTS Optical endstop board F(find out what it is) bearing 3x10mm axle Spring INSTALLATION Disassemble the stock filament sensor and set aside all the parts listed above Insert the bearing in the…
Sliding gnocci maker, put a roll of dough across the half pipes, put the lid on top, slide it back and forwards a few times and then you have a bunch of gnoccis. Don't forget to put flour inside to prevent sticking. To change the model,…
same instructions as the original model load filament for swirl pattern first and to avoid unnecessary colour change Bottom surface: Hilbert curve to better hide the lines Submit feature requests here!
Print in a way that there is no sparse infill Ideally print out of ASA or similar, as other materials would either melt in the sun or degrade with the constant UV light of the sun Submit feature requests here!
Parametric Beadboard for making necklaces inner circle has a 45cm perimeter for 6mm beads and the outer ring is for 8mm beads. The center part is for organizing the beads you want to use. Submit feature requests here!
Small bed nuts for the Neptune 4 Plus (might fit other models with the skeletonized bed) to adjust the whole bed from the top, that won't move over time. If you use srew tilt adjust, make sure to change the screw orientation from CW to…
This mod avoids the bracket cutting into the belt with high tension and vibrations, small toolless belt clamp that doesn't damage it. Fixes small sin error for better precision at the limits of the movement range. Supports 6-10mm Print as…
Small bracket that screws onto the 40mm fan to hold an endoscope at the correct focal distance to the nozzle. Print information PETG or better recommended PLA will fail with time no supports needed make sure you have good layer adhesion…
Small mounting bracket to cool a tmc 5160 plus Hardware 8 M3x10mm 6010 axial fan Submit feature requests here!
Print as oriented. Uses 2 M4x8 BHCS to mount to the extrusion Sensorless version of https://www.printables.com/model/1313705-neptune-4-ubbi-filament-guide-with-sensor Submit feature requests here!
Print settings print as oriented Supports: Tree, only on buildplate Top and bottom surface concentric TPU (or other flexible material) For best results you can set the top z distance of the supports to 0 and the top interface spacing to…
A set of feet replacing the original ones to mount on top of a CC1, installation can be a bit complicated to preserve the hidden hardware look of the BT. It is recommended to have a long reach hex bit with rounded head. Reuses same…
Makes respoolers a lot smoother by having 3 instead of 2 set screws, and can't unscrew itself with it's own driving action. Uses 3 M3x8 SHCS per wheel
Print as oriented This clip is not “tight” on the camera, but holds it well enough for the purpose. You will need to separate it from the base to fit in this bracket. There is plenty of room behind the camera in the clip for its cable.…
Might also be compatible with other dishwashers Print as oriented Print with more walls for more strength use orca 2.3.1's solid infill at layer to make the teeth attachment more solid Submit feature requests here!
Hardware - 8 * M3x12mm FHCS (same as the rest of the holder) Print as oriented I printed mine with 2 walls and 10% TPMS-D infill, settings may need to change depending on the hardness of the TPU used Submit feature requests here!
This keychain is a small celebration of open-source design, making, and the awesome people building things together. 🛠
This model includes the whole hotend including a v6 nozzle.
To wszystkie aktualnie dostępne wyniki.
