Liczymy pasujące modele…
Update: 22_03_18 File: BD62-3mm_22_03_18.stl Raised base of duct an additional 3mm from the Build plate to allow greater clearance if using Bulldog Clips to hold glass plate down. Clip nearest to home may still require pulling off a…
Wydruk około 2,15 €–2,62 € nettoWstępna wycena jednego wariantu
This is my third Core XY conversion kit for the Ender 5 with Linear rails. Previous versions here, updates at the bottom of the page. MK2: https://www.thingiverse.com/thing:4777606 Mk1: https://www.thingiverse.com/thing:4650517 As per the…
This is a Mask, Hat and Wig Stand. The design emphasis was minimalism and speed of printing. In this remix I have separated the parts so that the thing can be printed on a 220 x 220 build plate at 100% or on a 200 x 200 build plate at…
Update: 10_08_25 Uploaded 510 Volcano duct step file Update: 05\04\22 Replaced: WIP_Direct Drive Head Ender 3 Orbiter V2 no Upstand V2_1 as the original conflicted with the mounting plate. Update: 25\01\22 The V1_1 Orbiter Mounts had…
Now compatible with the Ender 3 V2 This is a remix of my Side Mounted Spool Holder which prints faster and is easier to assemble. I have uploaded 2 variations they both effectively do the same job, one uses slightly less plastic. I have…
Update:01_11_18 Uploaded f3d file. Update:17_08_18 New version available at the following link: Pill Box with AM PM Apertures V4 - It's More Personal! by boothyboothy | Download free STL model | Printables.com Circular Pill Box with:-…
This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…
There is a newer version of this thing which prints faster and is easier to assemble at this link: Ender 3 - Ender 3 Pro Side Mounted Spool Holder V3 by boothyboothy | Download free STL model | Printables.com /thing:4461496 There is a…
The design is fully tested but the documentation is work in progress, Please message if there any queries. Last edited 24\09\23. Attribution & Credit to the Voron Design Team I am not quite sure if this can be classed as a formal remix…
This is a series of simple nut helpers to retain an inexpensive M3 T-Slot Nut in the locked position within the extrusion. I designed this primarily for mounting Linear Rails to a 2020 V slot extrusion. Therefore all the variants are set…
Hydra Fan Duct & Tool Change System for Ender 3 Ender 5 & CR10 See Below for Updates, V6 Edition Here: https://www.thingiverse.com/thing:4253359 Firstly many thanks to AlfaBarion for suggesting such an incredibly clever name for this…
Knomi V2 Display Mount for the Voron Stealthburner This is a revised design of my Kenny Mod 2 to accept the Knomi V2 Display. Additional enhancements from the previous iteration: Increased side venting by 1mm to allow greater air flow to…
This is a remix of jumpshoutmedia`s excellent Super Struts support for the Creality Ender 5. This was already a brilliant thing but I tweaked a few details to make the installation a little easier. In this remix I have: 1.Included nut…
After 2 long hard years of service I decided my HEVO needed some TLC. Within the refurbishment I Klipperised the HEVO so I also had to revise my Electronics Enclosure design. The wire management of the HEVO is so much easier without a…
Update: 25\01\22 The V1_1 Orbiter Mounts had incorrect fixing centres for the V1.5 Orbiter so I have uploaded V1_2 (+ step file)for the tool head to correct this error. Update: 12_01_22 Uploaded Tool Head mount for the Orbiter V2…
Ivan Maranda`s Tiny CNC MK2 2080 Remix Issue 1. Ivan Maranda has created a awesome 3D printed Mini CNC machine that cuts metal. This mini machine is perfect for my needs and provides me with many modding opportunities. Initially I really…
This is my second iteration of a Stealthburner display mount for the Big Tree Tech Knomi Display. The Improvements in this version are: Front fixing display frame for very easy removal for maintenance or firmware upgrades. Can be easily…
Update 20\07\21: Uploaded Blade Duct with a notch to the left hand side to clear the heater cables in a stock hot end configuration. Based on sketches from a fellow member but not personally tested. I have not undertaken any air flow…
This is a Sherpa Mini Mount for the Voron 0.1 3D Printer. The Sherpa Mini being quite a close fit to the stock Mini Afterburner makes this a very practical alternative for the Voron.0.1 with the added bonus of less clogging, easier…
Update: 02\09\21 Uploaded a Plain Body part with a revised step detail to make the top bridging more reliable. The step detail is based on a 0.25mm layer height. Therefore for the best results print this part at 0.25mm or set your slicer…
This is a Picture frame to Frame a Mini light Box and 3D printed Lithophane image. Mini Light Box can be purchased here: https://www.amazon.co.uk/gp/product/B0767LGTZM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 This is inspired by…
Please Note: You will need a large format 3d printer like the CR10 to print these things. There is a newer version of this thing here: https://www.thingiverse.com/thing:3529550 This is a Mask, Hat and Wig Stand. The design emphasis was…
It is really useful that BTT have designed the Eddy probe to fit the original stock sensor on the Voron Stealthburner. Unfortunately the sensor is well and truly buried when the SB is assembled. Therefore at least the SB fascia has to be…
Inspired by Technidyne`s oiler I have produced this thing to oil certain types of filament and for when I want to purge\clean the heating chamber. The pivot allows the bucket more movement when the X carriage is traversing. 1.The mounting…
This is a Ball Screw & Aluminium Upgrade for Ivan Mirandas fabulous 3D printed Tiny CNC. Please support Ivans Channel by purchasing the original documentation at the following video link: (1422) 3D PRINTED CNC BUILT FROM SCRATCH CUTS…
This is a Heat set press made out of scrap Ender 3D printer parts. This is a CAD only publication The majority of the parts are from an Ender 3 but the rear plate is from an Ender 5. I have included FDM equivalents in the CAD files. I…
This is a remix of albrnick`s clever wall mount for the Dyson Vacuum Cleaner. In this remix I have: 1.Completely redesigned in Fusion with an articulated node design to provide greater flexibility in positioning accessories and reducing…
This is a series of Upgrades for the Voron 0 including Voron 0 ZTap Probing ZTilt Adjustment & Knomi V2 Display Full attribution & Credit to the Voron Design Team for the Original Voron 0 design and the CAD files this upgrade is based on.…
Electric Tooth brush & Tooth paste Holder. Printed at 0.2 resolution, 20% infill in PLA on an Ender 5 Category: Organization
Main Features 1. Compact form Factor 2. 360 Wire Management 3. Easy servicing & Nozzle change. 4. Uses a low cost Bambu Labs hot end or equivalent. 5. 3 x Extruder variants - LGX Lite - BTT Nebula - Custom designed extruder based on the…
There is a newer\improved version of this design here: Kenny Mod 2 for the BTT Knomi Display by boothyboothy | Download free STL model | Printables.com This is a alternative Stealthburner display mount for the Big Tree Tech Knomi Display.…
Pill Box with AM PM Apertures V4 - It's More Personal! There is a variation to this thing here: Pill Box V5 - Large Apertures - Days Only by boothyboothy | Download free STL model | Printables.com The main focus of this remix was to…
Pill Box V5 - Large Apertures - Days Only This is a remix of the V4 Pill Box requested by a Thingiverse member to remove the AM\PM split to provide larger 7 x single daily apertures for larger meds. 1.This remix only includes the Base…
Update:28\05\21 Uploaded RH & LH Ocean Panels with a Ballast Pocket and Lid. This is to help act as a counter weight if there are any issues with primarily the RH panel closing. I used a M5 Nylok Nut as a weight. This fitted without any…
Simple open picture frame to hold a Lithophane 3D printed image (No light source - requires to be positioned near light i.e Placed on window Sill. Fits Lithophane size 100mm x 90mm x 4 mm thick. Support\stand components are bonded to rear…
Update: 13\10\24 I have uploaded a Knomi V2 version. The V2 version is the same for both Generic & EVA3 mounts. 1. Due to the increased diameter of the V2 mount I have modified the EVA3 LGX Lite mount very slightly to accommodate. This…
There are newer versions of this thing here: Ender 3 & CR10 version Manta MK2 Duct & Tool Head System by boothyboothy | Download free STL model | Printables.com Ender 5 version Manta MK2 Duct & Tool Head System Ender 5 Version by…
Lockable Contour & Skirting Board Gauge Concept I wanted to create a Contour Gauge to aid the marking & scribing of Skirting Board Housing joints & similar. I have therefore remixed the original model with an internal support structure &…
Sample Filament Spool Holder for small and medium winding Quite a lot of sample filament I have purchased have been quite a small diameter winding so I have found myself having to rewind due to my previously printed spool holders having a…
THIS VERSION IS FOR THE ENDER 3 PRO ONLY 29\09\20 There is a newer version of this thing here: https://www.thingiverse.com/thing:4609997 10\08\20 There is a newer version of this thing here: https://www.thingiverse.com/thing:4566177…
This is a Core XY conversion kit for the Ender 5 with Linear rails There is a MK2 version here: Ender 5 Core XY with Linear Rails MK2 by boothyboothy | Download free STL model | Printables.com The latest (MK3) version here: Ender 5 Core…
This is a junction box for a Stepper Motor Extension Cable which replaces the existing X Gantry stop Cowl on many Creality Printers. Update 22\04\20: Uploaded step file. Please note, I have slightly increased M3 fixing holes in step file…
This was inspired by BrockLockers thing to help my wife with painting compositions. I found Brocklockers thing when printed not quite true in proportion to how I understand the Golden Ratio so I recreated my own in Fusion 360 (This may…
Pill Box with AM PM Apertures V3 - It's Personal! There is a newer version of this thing: https://www.thingiverse.com/thing:3445696 This beast is getting more complicated but hopefully, it ticks more boxes. In this remix I have:…
This is a Dial Indicator Stand using 8mm diameter steel rod. Includes: Tool less Adjustment Adjustable Nodes and Individual Clamping. Magnet Apertures to base. Location Mounting Plate. M5 Fixing Holes to Base & Side @ 20mm vertical…
This is a bit of a personalised custom Thing but someone might find it useful. The Remote stand has been designed to house the following Samsung Standard TV Remote Samsung Smart Remote Sky TV Remote Fire TV Remote Generic Blu-Ray Remote…
This is a remix of an earlier design: https://www.thingiverse.com/thing:3408661 In this remix I have: Value Engineered thing components to reduce the print time and plastic usage. Redesigned assembly with all clip fits so the bolts, nuts…
Update:19\06\20 Uploaded Step File. Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link:…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 06\01\20 Uploaded 4010 fan…
This is a Hose Adapter for a Karcher W3D vacuum unit to be used on Ivan Miranda`s Tiny CNC Mk2. Ivan`s video here: (645) 3D PRINTED CNC BUILT FROM SCRATCH CUTS METAL - YouTube This saves detaching the stock clip fitting on the hose and…
Simple scale model of a small form factor computer - scale 1:10 printed without supports in orientation uploaded. Category: Hobby
The latest version of this thing - Link: Ender 3 Pro V2 Compact SD Card Adapter Housing V4 by boothyboothy | Download free STL model | Printables.com This is a SD Card adapter housing for the Creality Ender 3. This thing attaches to the…
Update 24\11\19: Uploaded Days only version of base. I have not test printed this so still WIP. Update: There is now a revised version available here: https://www.thingiverse.com/thing:3243260 This is a remix of my Pill Box with AM PM…
I have classed this has WIP because although I have tested the assembly in a mock up to prove the parts work. I have not yet installed on any of my printers has they are too busy printing Face Shields at the moment. I have also included a…
29\09\20 There is a newer version of this thing here: Ender 3 Pro V2 Compact SD Card Adapter Housing V4 by boothyboothy | Download free STL model | Printables.com Edit 17\08\20: Just to confirm this will fit the Ender 3 V2 as well yet…
The latest version (MK3) is here: Ender 5 Core XY with Linear Rails MK3 by boothyboothy | Download free STL model | Printables.com hing:5157811 Update:30\08\21 Uploaded CAD Files in Fusion 360 & Step Formats. Update 22\05\21 Uploaded Step…
SD Card adaptor housing for the Creality Ender 3 Pro There is a compact SD Card Adaptor Housing here: https://www.thingiverse.com/thing:3537808 Please note if you have customised the bed type or bed position to lower than stock the…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 Update:23\11\19 Uploaded…
There is a newer version of this thing here: https://www.thingiverse.com/thing:4635067 Update:18\10\20 I had noticed some differences with the alignment of the touch panel on the BTT display with my various units. I have therefore offset…
This is a Klicky Probe Mount for my Hypercube Evolution refurbishment build. This is a Step file only upload. Please note the Hot End Probe Mount is specific to my Mini Boothy Hot End so may need some revision to suit a stock HEVO hot end…
I received a roll of TPU for Christmas and was inspired by Biolooks Air Duster to produce my own set of Air Dusters. I am really into photography so the fine tip duster will be great for Camera and Lens cleaning. In this design I have:…
Update:18\10\21 On request uploaded a step file for the revised parts. This is a replacement Z Axis Mount and Electronics Enclosure for The Prusa Mini & Clones. The primary design motivation was to provide a much more rigid assembly to…
Wall\ Wall Cabinet bracket for Nespresso Vertuo coffee capsules. The bracket was originally conceived for our Siematic Kitchen cupboards which have a shelf hook system inset into the door inner, hence, the corner eyelets in the model. The…
Inspired by the new Creality CR6 SE I have remixed my Side Mounted Spool Holder with a Pivot\Hinge. To be honest I still get a lot of use and probably prefer the original design but thought this might offer some further flexibility to…
Remix of davidreeb`s excellent 1st Gen Echo Show stand. This remix has been completely reworked in Fusion 360. I have increased width to allow for the larger 2nd gen unit and revised shape to reduce plastic content and print time. Due to…
This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S. There is a more recent version at the following link: https://www.thingiverse.com/thing:3259429 In this remix I have: 1.Sculpted the component…
This is a simple mount and harness for the PCT type of wire connector. These little things can be difficult to stick down with VHB and the rest on their own. The uploaded Fusion file includes some simple adjustments to the base for…
Bird Spikes to keep Birds off a tiled roof. This is a remix of 3dbc`s thing but with a curved base plate to help glue to a curved ridge tile and increased width to base of spikes to make slightly stronger and easier - although longer to…
This is a SD card adapter housing for the Creality Ender 5. This thing includes: 1.Integral clips which locate into the 2020 extrusions so there is no requirement for any additional fixings. 2.Integrated clip to Lid to stop any transverse…
30\10\20 Uploaded missing top & Bottom Panels for the BTT version. This is a remix of my Pivoting Display Housing but I have redesigned with a much slimmer profile. The original can be found here: Pivoting Display for Ender 3 - Pro - V2 -…
This is for the 10mm to 8 mm XY Joiner. I have included step files for the parts if you require to create a 8mm to 8mm derivative. My stock XY Joiners on my Hypercube Evo build started to split under the tension of the drive belts and the…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 Update:16_01_20 Uploaded…
This is a remix of my Dyson accessory holder but designed to retain the node articulation but printed in one single print. The V2 is probably more visually elegant and efficient to print - this version was has much a design challenge…
I remixed this great thing by kulfuerst with a scallop in the right hand side to allow more clearance for the heater cables in some of my compact 4010 fan duct designs. I also included an additional amount of material to the top edge of…
Please Note this fits the Ender 3 Only This does not fit the Ender 3 Pro In this remix I have revised the SD Card adapter housing for the Creality Ender 3 to include an integrated fan cowl shield and removable debris guard.…
Dampeners for Wanhao Duplicator I3 Plus - Balco Touch - maker select Just to clarify this thing was primarily designed as a vibration dampener to reduce ghosting\ringing by reducing vibration transfer from the work surface but may also…
This is various Dust Shoe Designs for the Shiny CNC Original Design here: ShinyCNC - Ball Screw & Aluminium Upgrade for the TinyCNC by boothyboothy | Download free STL model | Printables.com Step files only, these are very specific to my…
This is a simple holder\handle for keeping your fingers clean when sketching or drawing with a charcoal stick. The holder will take from 3 - 5 mm diameter pieces of charcoal. Printed in PLA with 100% infill and 3 perimeters on an Ender 3…
I spend a lot of time working on trains and find myself unwrapping and coiling the power cord to my Surface Pro 4 power adapter a lot. Therefore after 26 months (which is good considering the amount used - no complaints there) the…
This is a small PI Camera Housing & Mount for a Raspberry Pi Camera Module. This is the PI Camera used: https://www.amazon.co.uk/gp/product/B07G9VLPZH/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 1.The housing has ribbon cable…
Zonestar P802QR2 X Axis Mounts In this remix I have: Manually repaired the STL files so that they are now printable (The file I downloaded appeared to have some mesh issues and would not print correctly. Optionally, I have modified both…
Pebble Time Round Charging Cradle For you people that are lucky enough to still own a working Pebble Time Round this is another charging cradle to sit the watch upon whilst charging. A cantilevered ribbon design with integral cable…
This is a mount designed for use on my Surface Pro 4 and the Revopoint Pop 3D scanner. It is rather difficult holding the scanner and the tablet whilst concentrating on moving around the subject. This mount makes life a whole lot easier.…
My Collection of mostly remixes\upgrades for the Zonestar P802QR2. I have uploaded a Obj and 3DS file with all the relevant 3D models included if anyone wants to improve them further . The things can be found at the folllowing links…
This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased mine here:…
Update:27\10\20: Revised the main body part with an additional 0.5 mm clearance to the Card Adapter apertures to allow for any bridging distortion. Having upgraded my CR10S with a BTT 35 TFT I was frustrated that the existing Control Box…
Update: 02_04_26 Found the rock sludge was blocking up the drain holes very quickly so I have uploaded an alternative bowl with a G38 thread for a 10mm OD tube. Amazon link to connector: TA-VIGOR 10mm Pneumatic Push to Connect Fittings,…
This is a remix of my compact dual 4010 duct assembly for the Hypercube Evolution. My third version which includes: 1.Improved & reduced size ducts. 2.Reduced mass to mounting bracket. 3.Additional extended Ducts, BL Touch Mount & WM…
This is a 3D printed FDM printer called Arc The majority of the parts in this design are 3D printed including the levelling probe, extruder and drag chain. Not a piece of black extruded aluminium in sight! This is a low investment project…
Simple frame to frame Lithophane and mini light box from Amazon Light box Link: https://www.amazon.co.uk/gp/product/B0767LGTZM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Category: 2D Art
There is a newer version of this thing here: https://www.thingiverse.com/thing:4403017 I have reclassified this as WIP: The tool heads are quite close to the rear pulleys which I need to change. The Clamp for the V6 variants requires some…
This is a variation on my Compact dual fan assembly which includes a direct drive mount instead of a Bowden feed. I have only produced a bracket for the Creality Dual Gear Extruder so far. I have included a step file for the relevant…
Please note this is not compatible with the new CR10 V2 version This is a housing to hold a Micro SD to Standard SD Card adapter for the Creality CR10\CR10S 1.This is primarily a cosmetic remix which includes larger and more fluent radii…
This is a stackable component sorting & storage tray system which also provides Printer Calibration stress & testing. Main Features of the Tray system: Stackable Label Insert Pockets Pouring Ports for ease of re bagging parts. Secured…
Ender 3 CR10S Multi Direct Drive Extruder with Tool Free Adjustment This thing is more about creating a flexible Direct Drive extruder assembly which allows for relatively easy swapping out of extruder head types and hot end maintenance…
This is a remix of DarthOctane`s fabulous thing which includes additional venting and an additional pass through port to aid managing cables around the 3030 frame. I have also included mechanical fixed hatch\port covers for both ports.…
A Mini 12864 pivoting display Mount for a Vevo or other 3030 based 3D Printer with fixed ratchet positions from 0 to 80 degrees. The Rear Housing & Display Mount are modified parts based on the Voron Design V2.4 display mount. So full…
This is an Adapter Kit to mount my Manta MK2 cooling system on the Ender 5 Core XY MK3 Conversion. Please Note: The adapter kit is not compatible with the existing Stock Hot End. Ender 5 Core XY Conversion here: Ender 5 Core XY with…
Yet another thumb wheel for a M3 bolt. Category: 3D Printer Parts
Yet another CR10 remix for the CR10\CR10S Control Box. This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased…
