Liczymy pasujące modele…
Update April 10th, 2026: FreeCAD 1.1.0 broke the model in several places. I believe I have fixed everything and have reuploaded as "generic__mount_v110.fcstd". Let me know if the model doesn't work for you! Update Sept 6th, 2025: I have…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
Modified MailBox's Alientek rugged case inserts to include a space for flux on the top and the USB cable on the bottom. Space for three soldering tips, which seem to snap in place quite well. I have included all of the models I used to…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
I apologize for the screenshot! This was made at the request of someone else and it doesn't fit on my printer, so I am not able to provide a build. Please someone post a make so I can have a real image to use for this. 2U version of my…
Had these speakers laying a round and wanted to hook a friend up since his Tacoma still had the original paper cone speakers. Somehow no one made a model to adapt a 5.25" speaker into a 6.5" hole yet, so I made my own. Very simple model,…
There are a few printable MOLLE bottle holders out there but they seem to use a mostly rigid structure, which affects how well the backpack or other mounting surface can move and also raises durability concerns unless printed out of…
I modified the excellent existing model by MT to work with the newer Shokz OpenRun Pro 2's. As MT recommended for their design, use a piece of 1.75mm filament for the hinge, and print the clip sideways with supports for extra strength. My…
Print settings: 0.2mm layer height 3+ bottom layers and 4+ top layers 4 perimeters w/ 0.6mm nozzle or 6 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA should work fine but I'm not sure about the latch flexibility Specific build…
I've been trying to pare down my travel dopp kit so that I can travel lighter, but I didn't want to give up my razor. This handle reuses the attachment mechanism from hwmonkey's design, but with a redesigned handle that's a bit easier to…
Rack I made to hold an old Qotom quad NIC PC I've been using as a PFsense box for years. Designed around the space as the top of “Modular 10 Inch Server Rack - Reworked”, which is technically 1.5U but eats into some of the vertical space…
Made a quick and dirty VESA riser to get my monitors a bit higher. Holding up just fine for a couple months using PLA with 25% infill and 6 perimeters with a 0.6mm nozzle (9 perimeters with a 0.4mm nozzle). Needs 4 M4 threaded inserts and…
Quick model I made to hook large-bulb string lights onto a cable or rope. Makes mounting/removing the lights much easier since I can tension the cable separately. Sized to barely fit the mounting hooks for my lights, so it's not coming…
Designed this for a friend who wanted to wire up a light bar. Seems like it will work with most standard round plastic rocker switches available on amazon with a notch. Designed to be printed face down. I recommend organic supports for…
I found a stackable slot car track model online but was unsatisfied with how it couldn't be printed without supports. This design is easy to print laying on its side. It includes a base piece to improve stability and worked pretty well…
Quick remix to mount an Orange Pi Zero (or Zero LTS in my case) to a server rack. I had a couple of these boards laying around and decided to use one as a separate access point for my IOT devices. I made models for both the upper and…
Quick print to hang some marshmallow roasting sticks my wife picked up recently. Seems like there are quite a few sellers for these online, just search for “Marshmallow Roasting Sticks for Fire Pit”. Sized to use one large Command Strip…
Fuel petcock on my XR650R was allowing fuel to come out even when it was off. Took it apart and found the gasket with four holes in it was chewed up. Printed this on a textured sheet in 92A TPU with the following settings and it doesn't…
My license plate light cover broke and I didn't want to pay $25 on ebay or run to the junkyard. This design just replaces the black part of the original, so you'll need to pry that off and hold this one on either with glue or tape. Two…
I engine-swapped my KZ200 and the new engine doesn't have a cable tach output, so I pulled the tach apart to make a clock. A lot of 70s and 80s Japanese motorcycles use Nippon Seiki instruments, and of those a lot are the same size. If…
I found my ebike battery was able to move back and forth despite four mounting points, so I decided to whip something up to deal with it. Now short of a flying kick I don't think the battery is going to budge, and I even have a place to…
Felt silly paying $15+ for a front license plate mount when it ought to be a simple thing to design. I've had this mounted on my car for easily 20k miles without an issue. I printed in CF nylon (figured it was a simple print to dial in my…
Very sturdy tape holder using 3 ft of SCH 40 1/2" PVC pipe cut into 18 in. segments, a U.S. GENERAL 18 in. Magnetic Tool Holder from Harbor Freight, two M4 nuts and bolts, and a bit of CA glue. Attached as shown the rack can be removed…
I have some fantastic looking Braun RL-10 speakers that have good detail for the frequencies they can produce but fall off completely above 8 kHz or so. Wanting to keep the look of these speakers but trying to improve the sound of the…
To wszystkie aktualnie dostępne wyniki.
