Liczymy pasujące modele…
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
TL;DR: Print the top, print one of the two bottom parts, and optionally print the cable holder. This heatbed cable cover and holder is based on the original Prusa part. It keeps the exact dimensions for hardware, LED viewing window, cable…
Same single color radius gauges and boxes but with a snap fit for the lid and a PrusaSlicer 3MF file. Comes preset with seam position and perimeter order set. Prints decently quickly with 0.25mm layer heights.
Wall mount for Milwakuee 7 in. Rafter Square and 4-1/2 in. Trim Square Set
This is a wall mountable hat hanger that is meant for displaying of rigid baseball hats. The button of the cap is loosely held by the top and the rest of the hat is supported by the lower extension. There will be a floating effect and the…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
Use the original wide base with these new Saturn 4 vat holder and funnel files of this design. This remix uses the same 400mm long 2020 extrusion and mounting hardware (M5). The vat secures to the holder using the original thumb screw…
Three different 3.5" to 5.25" adapters based on @devtea's design: 120mm fan mount (fits in 3 bays) - most like original 80mm fan mount (fits in 2 bays) No fan mount
Remix to hold two clamps instead of six.
Snap-on dust port for the Kreg® K3 K4 K5 series of pocket hole jigs
Ongoing collection of various sized gridfinity baseplates with a provision for screw mounting remixed from the design by Ofek256.
This model mounts the Prusa black PSU to the side of an enclosure that is flush with a surface and doesn't require the area in the back. I've used this on a MK3 and MK4 black PSU (they appear to be the same supply). The top bracket is not…
This design replaces the extruder idler with one that has mounts for the BIGTREETECH (BTT) ADXL345 2.0 accelerometer board (https://www.amazon.com/BIGTREETECH-Accelerometer-Klipp-er-Connection-Stealthburner/dp/B0CHJQ6CXF) for use with…
This model is designed to be printed as three separate parts and then snapped together. Print one plate and two arms , flat on the bed. The orientation should already be set. I recommend PETG, ABS, or ASA for best performance. In theory ,…
This is for drilling axles at a 3 degree angle using a drill press (or a handheld drill with a 2-axis bubble level). It is not meant to locate the holes, just hold the unmodified BSA block for the car at an angle. Why 3 degrees? I used…
Use an M4 bolt and nut to secure the knob to the main body. You can mount with the knob on the top or bottom (I use bottom to not rest the weight of the rail on the cutting edge).
A standard centering cone but with one feature I didn't see in others: recesses cut for keeping seams away from faces that need to be smooth. Seams would otherwise interfere with the centering or the tolerance on the pin hole. I modeled…
Same model as fortinmike's but the paracord side channels are inset. Looping through them will keep the paracord within the outer perimeters of the wallet. Loop the paracord around the center like in the original design, pass through one…
Hang your MicroJig GRR-RIPPER on a vertical surface with this snap-in mount. Features holes for #8 screws (#6 works ok, too) with the bottom one for adjustment to make it plumb. PLA has a bit more clutch force than PETG (due to the former…
Disassemble the blade guard and install this print using the stock hardware. I used a zip tie to secure it to the end where there is no hardware. Other solutions seemed like a lot of complexity where this “just works”. Fits 2.5" vacuum…
Very simple print to keep the Buddy3D camera cable tucked up in the corner. Print in PETG (or something with higher temperature tolerance) and press in a 10x3mm magnet. No need to print with supports or in a different orientation. The…
Holders for small format interchangeable core (SFIC), large format interchangeable core (Sargent and Schlage LFIC), and key in knob (KIK) styles. Includes loops for attaching key rings and on some holders, M3 hardware for core retention…
Stands for the smaller series of quick grip bar clamps from Iwrin (tested with my 12" and 18"). It may work on other models of clamps. Printed in PLA (more rigid than PETG, etc) with 4 perimeters and 15% infill. It isn't the fastest to…
No hardware besides the 608 bearings and PC4-10 fittings. No drilling required. This is the same as the original, except adding a stand for a hygrometer and a different design for the desiccant cover that prints much faster (7 min vs 18…
Holds the set of three woodworking rulers commonly found on Amazon.
Insert your Olight magnetic charger by first feeding the USB port through the printed part and then secure a 25x7mm circular magnet (I used https://www.amazon.com/dp/B09ZX97G2B ) with countersunk M4 hardware (M4x10 or better yet an M4x12).
This insert by archeopterix on Thingiverse is great and fits perfectly. I only added some extra body where the tabs were added and would end up needing supports anyway. I printed in PETG with 0.4mm layers on a 0.6mm nozzle. Add supports…
Pretty simple enclosure for the LM2596S board that has constant current and constant voltage functionality. https://www.amazon.com/dp/B0781JC2WK Use M3x12 socket head cap screw and nut to attach the top to the bottom. Mount the bottom to…
This will mount one of the various inexpensive Remote ID transmitters that can be found online from Veeniix , Gleesfun, Holyton, Bwine, Ruko, etc. I have only tested this with the version that doesn't have the beeper. Print this in PETG,…
Requires two M3x30 (or 35) bolts and hex nuts and whatever hardware you want to use for attaching the dial indicator. Snug down on the pin just until it stays put but don't crank it down. Options for the pin that the wheel rides on: I…
This container will store a set of three paracord fids (aka threading needles or boat shoe lacers). It is designed for a set I found on Amazon ( https://www.amazon.com/dp/B00YPSHX3K ) that is 3.5" (89mm) long and one of each 1/8" (3.2mm),…
Print an insert and wall bracket for each crossbar you want to mount. Important : do not change print orientation. The orientation is to ensure proper layer line direction. Supports will be required for the insert. I printed it in PETG,…
Check your local rules to see if balancing can be done, or if there are restrictions on how to balance (such as adding or removing mass). The fixture will require the following additional hardware: Qty 2 - M5 hex nut 16mm or longer M5…
This is a simple wall mount for saw blades. Print and attach using flat head screws. Use the default orientation so the load is perpendicular to the layer lines. You can put two or three blades on a single mount.
Print in the supplied orientation without supports.
My car's electronics emits energy inside the cabin that is in the same band as laser radar detection. This blinder shields the forward laser sensor against the in-cabin emissions so you can still keep the laser band enabled. I strongly…
Wall mount for the 360 pocket level
I use this box to store EDC items such as wired earbuds, eyeclass cleaner, drink powders, OTC medication, this awesome phone stand: https://www.printables.com/model/39060-foldable-phone-stand , etc in my work bag (it was designed for the…
A simple hanger to mount your Festool D36 vacuum accessories onto a vertical surface. Prints as-is and does not require supports. I chose PETG as it is more elastic than PLA, but anything works fine. I upped the perimeters to 3 and infill…
Holds 6 different grits of stedi sticky standpaper for use with their sanding sticks. Works well with my model for holding the sticks: https://www.printables.com/model/1252379-stedi-carbon-fiber-sanding-sticks-gridfinity-holde Consider…
These are dominos sized for doing dry assembly and test fit before final assembly/glue-up. Use these to preserve your actual dominos and sanity. They will fit with enough hold to not fall out, but not require gorilla forces to remove.…
Print two, hang, display. Use the cleat model for a ¾" French cleat wall like in the picture. Use the wall version with a screw for any flat surface. If you want to reduce it to a single car, use your slicer to create a cut.
Holds 5 Vessel ball grip screwdrivers
This is a remix of the great stand by @MakerSpace307. I have rotated it back for badges that I like to display at a shallower angle. It can be printed as-is or for a more cosmetic finish, orient it with the final top surface on the bed…
Mount to the wall with countersunk screws. Done!
Slip these onto common calipers and measure outer dimensions for harder to reach areas. Its a quick print, but make sure you have really good bed adhesion. They are a pressure fit so slide them both on to the same depth, close the jaws,…
Print as-is without supports. Keep the perimeters and infill low so it has some flex. I chose to make this a snap-in and not as secure as a twist lock so a specific orientation isn't required. The tradeoff is a bit of holding power, but…
This is basically the same as the original, but includes a cutout in the door for the X-axis motor cable strain relief, and better aesthetics. Previously, either the heatbed or X-axis cable had to run through the bottom of the case and…
Holds a set of three Vessel Megadora Impacta screwdrivers plus a stubby.
The print inserts into a 5mm domino on the smallest width setting. It fits snugly but a little CA glue doesn't hurt.
Simple figurines of the LDR icons from the show. Scale them however you want! The default size was to create some desk trinkets.
The Tru-Point Pencil Pointer Model D was made by the Frederick Post Co. in the 1960s and 70s to sharpen lead primarily for lead holder pencils and is a rebranded Dietzgen SharPoint. This product used a consumable abrasive that was…
Print the mounts. Print 3x universal attachment. Voila.
Mount your pinewood derby car on a vertical surface with either the drilled or wheel hook mount. No supports are required for the print. Both use #6 or #8 screws with various head styles. Drilled Mount The top of the model has two flat…
This is a simple to print and assemble fixture for sharpening a watchmaker's (or any other very small) screwdriver with a body smaller than 5.5mm in diameter. Required Hardware: M3x12 bolt qty 2 M2x4 bolt 608 bearing qty 2 7mm x 10mm…
I wanted to mount this PoE cable to a box: https://www.aliexpress.us/item/3256802372841488.html Print two of these parts and index it to the cable where there are grooves near the RJ45 end. It will pressure fit into a 1" hole. I wrapped…
Holder for the included nozzles that snap fits onto the base station
This will hold four small hand pliers on their side for drawers that are 3" (76mm) high. The rack itself is 66mm high. There are a bunch of racks out there but I didn't see any meant for short toolbox drawers that compress the pliers to…
A simple mount for the Husky brand air compressor filter HDA70403AV. Attach to the filter with an M4x8 bolt and then to your surface with whatever length M4 hardware you need. I printed mine with 4 perimeters, 50% infill, 0.25 structural…
The Smokpub comes in a very protective box, but it doesn't travel well and takes up a lot of space. This model is a case for the main Smokpub smoker and the tin boxes of wood. The tolerances are tight, so I recommend printing just the…
Print with low infill (I used 5% grid) for saving filament and time. Regular version fits 12x3mm magnets (or use 12x2 but don't push them in all the way). Two work just fine. Use four if you want max grip.
I designed this flocking applicator for two main reasons: I needed one that was small, and I was learning a new CAD program. The only natural solution was to design something overly engineered and needlessly complicated where two…
This is a pretty straight forward case for a seam ripper I found on Amazon. There is a low-profile and a stackable variant so pick whichever suits your organizational needs.
Changes from the original: Bottom height reduced by removing the pocket under the VNA. Passthrough added from VNA to the storage area so that the lanyard can stow easily. Extra area available between the SMA connectors by removing the…
Print with a 0.2mm profile in the material of your choice and secure using two M2x10mm screws and two M2 nuts.
Print using your favorite profile in your favorite filament. There are no special considerations. The model will not stay in place vertically. It needs to rest on something so use the stop ring or rest it on the bottom. Clips onto the…
I'm using a converted the right-side handle to accept a PC4-10 push fitting. This holder will keep two accessories organized when running filament in with a Bowden tube from a dry box: the stock PTFE tube and a plug for the secondary push…
Simple mount that clips to a 20mm arm of an Andonstar digital microscope mount. The model photographed is the AD246S-M. Print with a 0.2mm preset in whatever filament you like.
Some PWD rule sets require the wood block from the kit to be used so if you can't 3D print it all, use these to help. Mark and cut out the side profile, then the top profile. You could tape the top template on and route out the profile…
Pretty straight forward cap used to step on, push, or hammer a spike into the ground. This cap was designed to fit the HRD spikes used in his products. The project file is the best route since it has a modifier set up with a high infill…
To wszystkie aktualnie dostępne wyniki.
